mirror of https://github.com/arendst/Tasmota.git
v5.8.0i - Some fixes and Add Sealevel Pressure
5.8.0i * Add Domoticz counter sensor to IrReceive representing Received IR Protocol and Data * Fix Southern Hemisphere TIME_STD/TIME_DST (#968) * Add Sea level pressure calculation (#974) * Fix virtual relay status message used with Color/Dimmer control (#989) * Fix command IRSend and IRHvac case sensitive parameter regression introduced with version 5.8.0 (#993)
This commit is contained in:
arendst
parent
3bc7dd4e83
commit
ff52288efe
|
|
@ -1,7 +1,7 @@
|
|||
## Sonoff-Tasmota
|
||||
Provide ESP8266 based Sonoff by [iTead Studio](https://www.itead.cc/) and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE.
|
||||
|
||||
Current version is **5.8.0h** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information.
|
||||
Current version is **5.8.0i** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information.
|
||||
|
||||
### ATTENTION All versions
|
||||
|
||||
|
|
|
|||
|
|
@ -1,6 +1,13 @@
|
|||
/* 5.8.0h
|
||||
/* 5.8.0i
|
||||
* Add Domoticz counter sensor to IrReceive representing Received IR Protocol and Data
|
||||
* Fix Southern Hemisphere TIME_STD/TIME_DST (#968)
|
||||
* Add Sea level pressure calculation (#974)
|
||||
* Fix virtual relay status message used with Color/Dimmer control (#989)
|
||||
* Fix command IRSend and IRHvac case sensitive parameter regression introduced with version 5.8.0 (#993)
|
||||
*
|
||||
* 5.8.0h
|
||||
* Rename command IRRemote to IRSend (#956)
|
||||
* Add optional IR Receiver support (#956)
|
||||
* Add IR Receiver support. Disable in user_config.h (#956)
|
||||
* Change default PWM assignment for Witty Cloud to support optional Color/Dimmer control (#976)
|
||||
* GPIO12 (Green) from GPIO_PWM4 to GPIO_PWM2
|
||||
* GPIO13 (Blue) from GPIO_PWM5 to GPIO_PWM3
|
||||
|
|
|
|||
|
|
@ -134,6 +134,7 @@
|
|||
#define D_POWERFACTOR "Factor"
|
||||
#define D_POWERUSAGE "Power"
|
||||
#define D_PRESSURE "Pressure"
|
||||
#define D_PRESSUREATSEALEVEL "SeaPressure"
|
||||
#define D_PROGRAM_FLASH_SIZE "Program Flash Size"
|
||||
#define D_PROGRAMFLASHSIZE "ProgramFlashSize"
|
||||
#define D_PROGRAM_SIZE "Program Size"
|
||||
|
|
@ -617,6 +618,7 @@
|
|||
#define D_RESET_AND_RESTARTING "Reset and Restarting"
|
||||
#define D_ONE_TO_RESET "1 to reset"
|
||||
#define D_CMND_TIMEZONE "Timezone"
|
||||
#define D_CMND_ALTITUDE "Altitude"
|
||||
#define D_CMND_LEDPOWER "LedPower"
|
||||
#define D_CMND_LEDSTATE "LedState"
|
||||
#define D_CMND_CFGDUMP "CfgDump"
|
||||
|
|
|
|||
|
|
@ -134,6 +134,7 @@
|
|||
#define D_POWERFACTOR "Factor"
|
||||
#define D_POWERUSAGE "Vermogen"
|
||||
#define D_PRESSURE "Luchtdruk"
|
||||
#define D_PRESSUREATSEALEVEL "ZeeLuchtdruk"
|
||||
#define D_PROGRAM_FLASH_SIZE "Programma Flash Grootte"
|
||||
#define D_PROGRAMFLASHSIZE "ProgrammaFlashGrootte"
|
||||
#define D_PROGRAM_SIZE "Programma Grootte"
|
||||
|
|
@ -617,6 +618,7 @@
|
|||
#define D_RESET_AND_RESTARTING "Reset en herstarten"
|
||||
#define D_ONE_TO_RESET "1 voor reset"
|
||||
#define D_CMND_TIMEZONE "Timezone"
|
||||
#define D_CMND_ALTITUDE "Altitude"
|
||||
#define D_CMND_LEDPOWER "LedPower"
|
||||
#define D_CMND_LEDSTATE "LedState"
|
||||
#define D_CMND_CFGDUMP "CfgDump"
|
||||
|
|
|
|||
|
|
@ -89,8 +89,9 @@ struct SYSCFG {
|
|||
char ex_state_text[3][11]; // was state_text until 5.1.6, was ex_mqtt_subtopic[33] until 4.1.1
|
||||
byte ex_mqtt_button_retain; // Not used since 5.0.2
|
||||
byte ex_mqtt_power_retain; // Not used since 5.0.2
|
||||
byte ex_value_units; // Not used since 5.0.2
|
||||
byte ex_button_restrict; // Not used since 5.0.2
|
||||
//byte ex_value_units; // Not used since 5.0.2
|
||||
//byte ex_button_restrict; // Not used since 5.0.2
|
||||
int16_t altitude; // Add since 5.8.0i
|
||||
uint16_t tele_period;
|
||||
|
||||
uint8_t power;
|
||||
|
|
|
|||
|
|
@ -639,9 +639,6 @@ void CFG_Delta()
|
|||
if (sysCfg.version < 0x03091500) {
|
||||
for (byte i = 0; i < 4; i++) sysCfg.switchmode[i] = SWITCH_MODE;
|
||||
}
|
||||
if (sysCfg.version < 0x04000200) {
|
||||
sysCfg.ex_button_restrict = 0;
|
||||
}
|
||||
if (sysCfg.version < 0x04000400) {
|
||||
CFG_DefaultSet_4_0_4();
|
||||
}
|
||||
|
|
@ -663,8 +660,8 @@ void CFG_Delta()
|
|||
if (sysCfg.version < 0x05000105) {
|
||||
sysCfg.flag = { 0 };
|
||||
sysCfg.flag.savestate = SAVE_STATE;
|
||||
sysCfg.flag.button_restrict = sysCfg.ex_button_restrict;
|
||||
sysCfg.flag.value_units = sysCfg.ex_value_units;
|
||||
sysCfg.flag.button_restrict = 0;
|
||||
sysCfg.flag.value_units = 0;
|
||||
sysCfg.flag.mqtt_enabled = sysCfg.ex_mqtt_enabled;
|
||||
// sysCfg.flag.mqtt_response = 0;
|
||||
sysCfg.flag.mqtt_power_retain = sysCfg.ex_mqtt_power_retain;
|
||||
|
|
|
|||
|
|
@ -25,11 +25,12 @@
|
|||
- Select IDE Tools - Flash Size: "1M (no SPIFFS)"
|
||||
====================================================*/
|
||||
|
||||
#define VERSION 0x05080008 // 5.8.0h
|
||||
#define VERSION 0x05080009 // 5.8.0i
|
||||
|
||||
enum week_t {Last, First, Second, Third, Fourth};
|
||||
enum dow_t {Sun=1, Mon, Tue, Wed, Thu, Fri, Sat};
|
||||
enum month_t {Jan=1, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec};
|
||||
enum hemis_t {North, South};
|
||||
enum log_t {LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE, LOG_LEVEL_ALL}; // SerialLog, Syslog, Weblog
|
||||
enum wifi_t {WIFI_RESTART, WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_RETRY, WIFI_WAIT, MAX_WIFI_OPTION}; // WifiConfig
|
||||
enum swtch_t {TOGGLE, FOLLOW, FOLLOW_INV, PUSHBUTTON, PUSHBUTTON_INV, PUSHBUTTONHOLD, PUSHBUTTONHOLD_INV, MAX_SWITCH_OPTION}; // SwitchMode
|
||||
|
|
@ -206,6 +207,7 @@ struct TIME_T {
|
|||
|
||||
struct TimeChangeRule
|
||||
{
|
||||
uint8_t hemis; // 0-Northern, 1=Southern Hemisphere (=Opposite DST/STD)
|
||||
uint8_t week; // 1=First, 2=Second, 3=Third, 4=Fourth, or 0=Last week of the month
|
||||
uint8_t dow; // day of week, 1=Sun, 2=Mon, ... 7=Sat
|
||||
uint8_t month; // 1=Jan, 2=Feb, ... 12=Dec
|
||||
|
|
@ -1510,6 +1512,12 @@ void mqttDataCb(char* topic, byte* data, unsigned int data_len)
|
|||
}
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_TIMEZONE "\":%d}"), sysCfg.timezone);
|
||||
}
|
||||
else if (!strcasecmp_P(type, PSTR(D_CMND_ALTITUDE))) {
|
||||
if ((data_len > 0) && ((payload >= -30000) && (payload <= 30000))) {
|
||||
sysCfg.altitude = payload;
|
||||
}
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_ALTITUDE "\":%d}"), sysCfg.altitude);
|
||||
}
|
||||
else if (!strcasecmp_P(type, PSTR(D_CMND_LEDPOWER))) {
|
||||
if ((payload >= 0) && (payload <= 2)) {
|
||||
sysCfg.ledstate &= 8;
|
||||
|
|
|
|||
|
|
@ -1086,8 +1086,13 @@ void rtc_second()
|
|||
loctime = utctime;
|
||||
if (loctime > 1451602800) { // 2016-01-01
|
||||
if (99 == sysCfg.timezone) {
|
||||
dstoffset = myDST.offset * SECS_PER_MIN;
|
||||
stdoffset = mySTD.offset * SECS_PER_MIN;
|
||||
if (myDST.hemis) {
|
||||
dstoffset = mySTD.offset * SECS_PER_MIN; // Southern hemisphere
|
||||
stdoffset = myDST.offset * SECS_PER_MIN;
|
||||
} else {
|
||||
dstoffset = myDST.offset * SECS_PER_MIN; // Northern hemisphere
|
||||
stdoffset = mySTD.offset * SECS_PER_MIN;
|
||||
}
|
||||
if ((utctime >= (dsttime - stdoffset)) && (utctime < (stdtime - dstoffset))) {
|
||||
loctime += dstoffset; // Daylight Saving Time
|
||||
} else {
|
||||
|
|
|
|||
|
|
@ -131,10 +131,10 @@
|
|||
#define NTP_SERVER3 "0.nl.pool.ntp.org" // [NtpServer3] Select third NTP server by name or IP address (93.94.224.67)
|
||||
|
||||
// -- Time - Start Daylight Saving Time and timezone offset from UTC in minutes
|
||||
#define TIME_DST Last, Sun, Mar, 2, +120 // Last sunday in march at 02:00 +120 minutes
|
||||
#define TIME_DST North, Last, Sun, Mar, 2, +120 // Northern Hemisphere, Last sunday in march at 02:00 +120 minutes
|
||||
|
||||
// -- Time - Start Standard Time and timezone offset from UTC in minutes
|
||||
#define TIME_STD Last, Sun, Oct, 3, +60 // Last sunday in october 02:00 +60 minutes
|
||||
#define TIME_STD North, Last, Sun, Oct, 3, +60 // Northern Hemisphere, Last sunday in october 02:00 +60 minutes
|
||||
|
||||
// -- Application ---------------------------------
|
||||
#define APP_TIMEZONE 1 // [Timezone] +1 hour (Amsterdam) (-12 .. 12 = hours from UTC, 99 = use TIME_DST/TIME_STD)
|
||||
|
|
|
|||
|
|
@ -270,6 +270,8 @@ const char HTTP_SNS_HUM[] PROGMEM =
|
|||
"<tr><th>%s " D_HUMIDITY "</th><td>%s%</td></tr>";
|
||||
const char HTTP_SNS_PRESSURE[] PROGMEM =
|
||||
"<tr><th>%s " D_PRESSURE "</th><td>%s " D_UNIT_PRESSURE "</td></tr>";
|
||||
const char HTTP_SNS_PRESSUREATSEALEVEL[] PROGMEM =
|
||||
"<tr><th>%s " D_PRESSUREATSEALEVEL "</th><td>%s " D_UNIT_PRESSURE "</td></tr>";
|
||||
const char HTTP_SNS_LIGHT[] PROGMEM =
|
||||
"<tr><th>%s " D_LIGHT "</th><td>%d%</td></tr>";
|
||||
const char HTTP_SNS_NOISE[] PROGMEM =
|
||||
|
|
|
|||
|
|
@ -23,31 +23,35 @@
|
|||
\*********************************************************************************************/
|
||||
|
||||
#ifndef USE_IR_HVAC
|
||||
#include <IRremoteESP8266.h>
|
||||
#include <IRremoteESP8266.h>
|
||||
#else
|
||||
#include <IRMitsubishiAC.h>
|
||||
#include <IRMitsubishiAC.h>
|
||||
|
||||
// HVAC TOSHIBA_
|
||||
#define HVAC_TOSHIBA_HDR_MARK 4400
|
||||
#define HVAC_TOSHIBA_HDR_SPACE 4300
|
||||
#define HVAC_TOSHIBA_BIT_MARK 543
|
||||
#define HVAC_TOSHIBA_ONE_SPACE 1623
|
||||
#define HVAC_MISTUBISHI_ZERO_SPACE 472
|
||||
#define HVAC_TOSHIBA_RPT_MARK 440
|
||||
#define HVAC_TOSHIBA_RPT_SPACE 7048 // Above original iremote limit
|
||||
#define HVAC_TOSHIBA_DATALEN 9
|
||||
// HVAC TOSHIBA_
|
||||
#define HVAC_TOSHIBA_HDR_MARK 4400
|
||||
#define HVAC_TOSHIBA_HDR_SPACE 4300
|
||||
#define HVAC_TOSHIBA_BIT_MARK 543
|
||||
#define HVAC_TOSHIBA_ONE_SPACE 1623
|
||||
#define HVAC_MISTUBISHI_ZERO_SPACE 472
|
||||
#define HVAC_TOSHIBA_RPT_MARK 440
|
||||
#define HVAC_TOSHIBA_RPT_SPACE 7048 // Above original iremote limit
|
||||
#define HVAC_TOSHIBA_DATALEN 9
|
||||
|
||||
IRMitsubishiAC *mitsubir = NULL;
|
||||
IRMitsubishiAC *mitsubir = NULL;
|
||||
|
||||
const char FANSPEED[] = "A12345S";
|
||||
const char HVACMODE[] = "HDCA";
|
||||
const char FANSPEED[] = "A12345S";
|
||||
const char HVACMODE[] = "HDCA";
|
||||
#endif
|
||||
|
||||
/*********************************************************************************************\
|
||||
* IR Send
|
||||
\*********************************************************************************************/
|
||||
|
||||
IRsend *irsend = NULL;
|
||||
|
||||
void ir_send_init(void)
|
||||
{
|
||||
irsend = new IRsend(pin[GPIO_IRSEND]); // an IR led is at GPIO_IRSEND
|
||||
irsend = new IRsend(pin[GPIO_IRSEND]); // an IR led is at GPIO_IRSEND
|
||||
irsend->begin();
|
||||
|
||||
#ifdef USE_IR_HVAC
|
||||
|
|
@ -56,151 +60,110 @@ void ir_send_init(void)
|
|||
}
|
||||
|
||||
#ifdef USE_IR_RECEIVE
|
||||
#define IR_TIME_AVOID_DUPLICATE 500 // Milliseconds
|
||||
/*********************************************************************************************\
|
||||
* IR Receive
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define IR_TIME_AVOID_DUPLICATE 500 // Milliseconds
|
||||
|
||||
IRrecv *irrecv = NULL;
|
||||
unsigned long ir_lasttime = 0;
|
||||
|
||||
void ir_recv_init(void)
|
||||
{
|
||||
irrecv = new IRrecv(pin[GPIO_IRRECV]); // an IR led is at GPIO_IRRECV
|
||||
irrecv->enableIRIn(); // Start the receiver
|
||||
// addLog_P(LOG_LEVEL_DEBUG, PSTR("IrReceive initialized"));
|
||||
}
|
||||
#endif // USE_IR_RECEIVE
|
||||
irrecv = new IRrecv(pin[GPIO_IRRECV]); // an IR led is at GPIO_IRRECV
|
||||
irrecv->enableIRIn(); // Start the receiver
|
||||
|
||||
// addLog_P(LOG_LEVEL_DEBUG, PSTR("IrReceive initialized"));
|
||||
}
|
||||
|
||||
void ir_recv_check()
|
||||
{
|
||||
char sirtype[100];
|
||||
char *protocol;
|
||||
int8_t iridx = 0;
|
||||
|
||||
decode_results results;
|
||||
|
||||
if (irrecv->decode(&results)) {
|
||||
|
||||
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_IRR "RawLen %d, Bits %d, Value %08X, Decode %d"),
|
||||
results.rawlen, results.bits, results.value, results.decode_type);
|
||||
addLog(LOG_LEVEL_DEBUG);
|
||||
|
||||
unsigned long now = millis();
|
||||
if ((now - ir_lasttime > IR_TIME_AVOID_DUPLICATE) && (UNKNOWN != results.decode_type) && (results.bits > 0)) {
|
||||
ir_lasttime = now;
|
||||
|
||||
iridx = results.decode_type;
|
||||
if ((iridx < 0) || (iridx > 14)) {
|
||||
iridx = 0;
|
||||
}
|
||||
// Based on IRremoteESP8266.h enum decode_type_t
|
||||
snprintf_P(sirtype, sizeof(sirtype), PSTR("UNKNOWN RC5 RC6 NEC SONY PANASONIC JVC SAMSUNG WHYNTER AIWA_RC_T501 LG SANYO MITSUBISHI DISH SHARP"));
|
||||
protocol = strtok(sirtype, " ");
|
||||
while (iridx) {
|
||||
iridx--;
|
||||
protocol = strtok(NULL, " ");
|
||||
}
|
||||
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_IRRECEIVED "\":{\"" D_IR_PROTOCOL "\":\"%s\", \"" D_IR_BITS "\":%d, \"" D_IR_DATA "\":\"%X\"}}"),
|
||||
protocol, results.bits, results.value);
|
||||
mqtt_publish_topic_P(6, PSTR(D_IRRECEIVED));
|
||||
#ifdef USE_DOMOTICZ
|
||||
unsigned long value = results.value | (iridx << 28); // [Protocol:4, Data:28]
|
||||
domoticz_sensor(DZ_COUNT, value); // Send data as Domoticz Counter value
|
||||
#endif // USE_DOMOTICZ
|
||||
}
|
||||
|
||||
irrecv->resume();
|
||||
}
|
||||
}
|
||||
#endif // USE_IR_RECEIVE
|
||||
|
||||
#ifdef USE_IR_HVAC
|
||||
/*********************************************************************************************\
|
||||
* Commands
|
||||
* IR Heating, Ventilation and Air Conditioning using IRMitsubishiAC library
|
||||
\*********************************************************************************************/
|
||||
|
||||
/*
|
||||
* ArduinoJSON entry used to calculate jsonBuf: JSON_OBJECT_SIZE(3) + 40 = 96
|
||||
IRsend:
|
||||
{ "protocol": "SAMSUNG", "bits": 32, "data": 551502015 }
|
||||
|
||||
IRhvac:
|
||||
{ "Vendor": "<Toshiba|Mitsubishi>", "Power": <0|1>, "Mode": "<Hot|Cold|Dry|Auto>", "FanSpeed": "<1|2|3|4|5|Auto|Silence>", "Temp": <17..30> }
|
||||
*/
|
||||
|
||||
boolean ir_send_command(char *type, uint16_t index, char *dataBuf, uint16_t data_len, int16_t payload)
|
||||
{
|
||||
boolean serviced = true;
|
||||
boolean error = false;
|
||||
const char *protocol;
|
||||
uint8_t bits = 0;
|
||||
uint32_t data = 0;
|
||||
|
||||
const char *HVAC_Mode;
|
||||
const char *HVAC_FanMode;
|
||||
const char *HVAC_Vendor;
|
||||
int HVAC_Temp = 21;
|
||||
boolean HVAC_Power = true;
|
||||
|
||||
if (!strcasecmp_P(type, PSTR(D_CMND_IRSEND))) {
|
||||
if (data_len) {
|
||||
StaticJsonBuffer<128> jsonBuf;
|
||||
JsonObject &ir_json = jsonBuf.parseObject(dataBuf);
|
||||
if (!ir_json.success()) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRSEND "\":\"" D_INVALID_JSON "\"}")); // JSON decode failed
|
||||
} else {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRSEND "\":\"" D_DONE "\"}"));
|
||||
protocol = ir_json[D_IR_PROTOCOL];
|
||||
bits = ir_json[D_IR_BITS];
|
||||
data = ir_json[D_IR_DATA];
|
||||
if (protocol && bits && data) {
|
||||
if (!strcasecmp_P(protocol, PSTR("NEC"))) irsend->sendNEC(data, bits);
|
||||
else if (!strcasecmp_P(protocol, PSTR("SONY"))) irsend->sendSony(data, bits);
|
||||
else if (!strcasecmp_P(protocol, PSTR("RC5"))) irsend->sendRC5(data, bits);
|
||||
else if (!strcasecmp_P(protocol, PSTR("RC6"))) irsend->sendRC6(data, bits);
|
||||
else if (!strcasecmp_P(protocol, PSTR("DISH"))) irsend->sendDISH(data, bits);
|
||||
else if (!strcasecmp_P(protocol, PSTR("JVC"))) irsend->sendJVC(data, bits, 1);
|
||||
else if (!strcasecmp_P(protocol, PSTR("SAMSUNG"))) irsend->sendSAMSUNG(data, bits);
|
||||
else {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRSEND "\":\"" D_PROTOCOL_NOT_SUPPORTED "\"}"));
|
||||
}
|
||||
} else error = true;
|
||||
}
|
||||
} else error = true;
|
||||
if (error) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRSEND "\":\"" D_NO " " D_IR_PROTOCOL ", " D_IR_BITS " " D_OR " " D_IR_DATA "\"}"));
|
||||
}
|
||||
}
|
||||
#ifdef USE_IR_HVAC
|
||||
else if (!strcasecmp_P(type, PSTR(D_CMND_IRHVAC))) {
|
||||
if (data_len) {
|
||||
StaticJsonBuffer<164> jsonBufer;
|
||||
JsonObject &root = jsonBufer.parseObject(dataBuf);
|
||||
if (!root.success()) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRHVAC "\":\"" D_INVALID_JSON "\"}")); // JSON decode failed
|
||||
} else {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRHVAC "\":\"" D_DONE "\"}"));
|
||||
HVAC_Vendor = root[D_IRHVAC_VENDOR];
|
||||
HVAC_Power = root[D_IRHVAC_POWER];
|
||||
HVAC_Mode = root[D_IRHVAC_MODE];
|
||||
HVAC_FanMode = root[D_IRHVAC_FANSPEED];
|
||||
HVAC_Temp = root[D_IRHVAC_TEMP];
|
||||
|
||||
// snprintf_P(log_data, sizeof(log_data), PSTR("IRHVAC: Received Vendor %s, Power %d, Mode %s, FanSpeed %s, Temp %d"),
|
||||
// HVAC_Vendor, HVAC_Power, HVAC_Mode, HVAC_FanMode, HVAC_Temp);
|
||||
// addLog(LOG_LEVEL_DEBUG);
|
||||
|
||||
if (HVAC_Vendor == NULL || !strcasecmp_P(HVAC_Vendor, PSTR("TOSHIBA"))) {
|
||||
error = ir_hvac_toshiba(HVAC_Mode, HVAC_FanMode, HVAC_Power, HVAC_Temp);
|
||||
}
|
||||
else if (!strcasecmp_P(HVAC_Vendor, PSTR("MITSUBISHI"))) {
|
||||
error = ir_hvac_mitsubishi(HVAC_Mode, HVAC_FanMode, HVAC_Power, HVAC_Temp);
|
||||
}
|
||||
else error = true;
|
||||
}
|
||||
} else error = true;
|
||||
if (error) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRHVAC "\":\"" D_WRONG " " D_IRHVAC_VENDOR ", " D_IRHVAC_MODE " " D_OR " " D_IRHVAC_FANSPEED "\"}"));
|
||||
}
|
||||
}
|
||||
#endif // USE_IR_HVAC
|
||||
else {
|
||||
serviced = false; // Unknown command
|
||||
}
|
||||
return serviced;
|
||||
}
|
||||
|
||||
#ifdef USE_IR_HVAC
|
||||
boolean ir_hvac_toshiba(const char *HVAC_Mode, const char *HVAC_FanMode, boolean HVAC_Power, int HVAC_Temp)
|
||||
{
|
||||
unsigned int rawdata[2 + 2*8*HVAC_TOSHIBA_DATALEN + 2];
|
||||
byte data[HVAC_TOSHIBA_DATALEN] = { 0xF2, 0x0D, 0x03, 0xFC, 0x01, 0x00, 0x00, 0x00, 0x00 };
|
||||
unsigned int rawdata[2 + 2 * 8 * HVAC_TOSHIBA_DATALEN + 2];
|
||||
byte data[HVAC_TOSHIBA_DATALEN] = {0xF2, 0x0D, 0x03, 0xFC, 0x01, 0x00, 0x00, 0x00, 0x00};
|
||||
|
||||
char *p;
|
||||
char *token;
|
||||
uint8_t mode;
|
||||
|
||||
if (HVAC_Mode == NULL) {
|
||||
p = (char*)HVACMODE; // default HVAC_HOT
|
||||
} else {
|
||||
p = (char *)HVACMODE; // default HVAC_HOT
|
||||
}
|
||||
else {
|
||||
p = strchr(HVACMODE, toupper(HVAC_Mode[0]));
|
||||
}
|
||||
if (!p) {
|
||||
return true;
|
||||
}
|
||||
data[6] = (p - HVACMODE) ^ 0x03; // HOT = 0x03, DRY = 0x02, COOL = 0x01, AUTO = 0x00
|
||||
data[6] = (p - HVACMODE) ^ 0x03; // HOT = 0x03, DRY = 0x02, COOL = 0x01, AUTO = 0x00
|
||||
|
||||
if (!HVAC_Power) {
|
||||
data[6] = (byte) 0x07; // Turn OFF HVAC
|
||||
data[6] = (byte)0x07; // Turn OFF HVAC
|
||||
}
|
||||
|
||||
if (HVAC_FanMode == NULL) {
|
||||
p = (char*)FANSPEED; // default FAN_SPEED_AUTO
|
||||
} else {
|
||||
p = (char *)FANSPEED; // default FAN_SPEED_AUTO
|
||||
}
|
||||
else {
|
||||
p = strchr(FANSPEED, toupper(HVAC_FanMode[0]));
|
||||
}
|
||||
if (!p) {
|
||||
return true;
|
||||
}
|
||||
mode = p - FANSPEED +1;
|
||||
mode = p - FANSPEED + 1;
|
||||
if ((1 == mode) || (7 == mode)) {
|
||||
mode = 0;
|
||||
}
|
||||
mode = mode << 5; // AUTO = 0x00, SPEED = 0x40, 0x60, 0x80, 0xA0, 0xC0, SILENT = 0x00
|
||||
mode = mode << 5; // AUTO = 0x00, SPEED = 0x40, 0x60, 0x80, 0xA0, 0xC0, SILENT = 0x00
|
||||
data[6] = data[6] | mode;
|
||||
|
||||
byte Temp;
|
||||
|
|
@ -213,11 +176,11 @@ boolean ir_hvac_toshiba(const char *HVAC_Mode, const char *HVAC_FanMode, boolean
|
|||
else {
|
||||
Temp = HVAC_Temp;
|
||||
}
|
||||
data[5] = (byte) Temp - 17 << 4;
|
||||
data[5] = (byte)Temp - 17 << 4;
|
||||
|
||||
data[HVAC_TOSHIBA_DATALEN-1] = 0;
|
||||
data[HVAC_TOSHIBA_DATALEN - 1] = 0;
|
||||
for (int x = 0; x < HVAC_TOSHIBA_DATALEN - 1; x++) {
|
||||
data[HVAC_TOSHIBA_DATALEN-1] = (byte) data[x] ^ data[HVAC_TOSHIBA_DATALEN -1]; // CRC is a simple bits addition
|
||||
data[HVAC_TOSHIBA_DATALEN - 1] = (byte)data[x] ^ data[HVAC_TOSHIBA_DATALEN - 1]; // CRC is a simple bits addition
|
||||
}
|
||||
|
||||
int i = 0;
|
||||
|
|
@ -246,14 +209,14 @@ boolean ir_hvac_toshiba(const char *HVAC_Mode, const char *HVAC_FanMode, boolean
|
|||
rawdata[i++] = HVAC_TOSHIBA_RPT_SPACE;
|
||||
|
||||
noInterrupts();
|
||||
irsend->sendRaw(rawdata,i,38);
|
||||
irsend->sendRaw(rawdata,i,38);
|
||||
irsend->sendRaw(rawdata, i, 38);
|
||||
irsend->sendRaw(rawdata, i, 38);
|
||||
interrupts();
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
boolean ir_hvac_mitsubishi(const char *HVAC_Mode,const char *HVAC_FanMode, boolean HVAC_Power, int HVAC_Temp)
|
||||
boolean ir_hvac_mitsubishi(const char *HVAC_Mode, const char *HVAC_FanMode, boolean HVAC_Power, int HVAC_Temp)
|
||||
{
|
||||
char *p;
|
||||
char *token;
|
||||
|
|
@ -262,73 +225,159 @@ boolean ir_hvac_mitsubishi(const char *HVAC_Mode,const char *HVAC_FanMode, boole
|
|||
mitsubir->stateReset();
|
||||
|
||||
if (HVAC_Mode == NULL) {
|
||||
p = (char*)HVACMODE; // default HVAC_HOT
|
||||
} else {
|
||||
p = (char *)HVACMODE; // default HVAC_HOT
|
||||
}
|
||||
else {
|
||||
p = strchr(HVACMODE, toupper(HVAC_Mode[0]));
|
||||
}
|
||||
if (!p) {
|
||||
return true;
|
||||
}
|
||||
mode = (p - HVACMODE +1) << 3; // HOT = 0x08, DRY = 0x10, COOL = 0x18, AUTO = 0x20
|
||||
mode = (p - HVACMODE + 1) << 3; // HOT = 0x08, DRY = 0x10, COOL = 0x18, AUTO = 0x20
|
||||
mitsubir->setMode(mode);
|
||||
|
||||
mitsubir->setPower(HVAC_Power);
|
||||
|
||||
if (HVAC_FanMode == NULL) {
|
||||
p = (char*)FANSPEED; // default FAN_SPEED_AUTO
|
||||
} else {
|
||||
p = (char *)FANSPEED; // default FAN_SPEED_AUTO
|
||||
}
|
||||
else {
|
||||
p = strchr(FANSPEED, toupper(HVAC_FanMode[0]));
|
||||
}
|
||||
if (!p) {
|
||||
return true;
|
||||
}
|
||||
mode = p - FANSPEED; // AUTO = 0, SPEED = 1 .. 5, SILENT = 6
|
||||
mode = p - FANSPEED; // AUTO = 0, SPEED = 1 .. 5, SILENT = 6
|
||||
mitsubir->setFan(mode);
|
||||
|
||||
mitsubir->setTemp(HVAC_Temp);
|
||||
mitsubir->setVane(MITSUBISHI_AC_VANE_AUTO);
|
||||
mitsubir->send();
|
||||
|
||||
// snprintf_P(log_data, sizeof(log_data), PSTR("IRHVAC: Mitsubishi Power %d, Mode %d, FanSpeed %d, Temp %d, VaneMode %d"),
|
||||
// mitsubir->getPower(), mitsubir->getMode(), mitsubir->getFan(), mitsubir->getTemp(), mitsubir->getVane());
|
||||
// addLog(LOG_LEVEL_DEBUG);
|
||||
// snprintf_P(log_data, sizeof(log_data), PSTR("IRHVAC: Mitsubishi Power %d, Mode %d, FanSpeed %d, Temp %d, VaneMode %d"),
|
||||
// mitsubir->getPower(), mitsubir->getMode(), mitsubir->getFan(), mitsubir->getTemp(), mitsubir->getVane());
|
||||
// addLog(LOG_LEVEL_DEBUG);
|
||||
|
||||
return false;
|
||||
}
|
||||
#endif // USE_IR_HVAC
|
||||
#endif // USE_IR_HVAC
|
||||
|
||||
#ifdef USE_IR_RECEIVE
|
||||
void ir_recv_check()
|
||||
/*********************************************************************************************\
|
||||
* Commands
|
||||
\*********************************************************************************************/
|
||||
|
||||
/*
|
||||
* ArduinoJSON entry used to calculate jsonBuf: JSON_OBJECT_SIZE(3) + 40 = 96
|
||||
IRsend:
|
||||
{ "protocol": "SAMSUNG", "bits": 32, "data": 551502015 }
|
||||
|
||||
IRhvac:
|
||||
{ "Vendor": "<Toshiba|Mitsubishi>", "Power": <0|1>, "Mode": "<Hot|Cold|Dry|Auto>", "FanSpeed": "<1|2|3|4|5|Auto|Silence>", "Temp": <17..30> }
|
||||
*/
|
||||
|
||||
boolean ir_send_command(char *type, uint16_t index, char *dataBuf, uint16_t data_len, int16_t payload)
|
||||
{
|
||||
char sirtype[100];
|
||||
char *protocol;
|
||||
int8_t iridx = 0;
|
||||
boolean serviced = true;
|
||||
boolean error = false;
|
||||
char dataBufUc[data_len];
|
||||
const char *protocol;
|
||||
uint8_t bits = 0;
|
||||
uint32_t data = 0;
|
||||
|
||||
decode_results results;
|
||||
if (irrecv->decode(&results)) {
|
||||
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_IRR "RawLen %d, Bits %d, Value %08X, Decode %d"),
|
||||
results.rawlen, results.bits, results.value, results.decode_type);
|
||||
addLog(LOG_LEVEL_DEBUG);
|
||||
unsigned long now = millis();
|
||||
if ((now - ir_lasttime > IR_TIME_AVOID_DUPLICATE) && (UNKNOWN != results.decode_type) && (results.bits > 0)) {
|
||||
ir_lasttime = now;
|
||||
iridx = results.decode_type;
|
||||
if ((iridx < 0) || (iridx > 14)) {
|
||||
iridx = 0;
|
||||
}
|
||||
// Based on IRremoteESP8266.h enum decode_type_t
|
||||
snprintf_P(sirtype, sizeof(sirtype), PSTR("UNKNOWN RC5 RC6 NEC SONY PANASONIC JVC SAMSUNG WHYNTER AIWA_RC_T501 LG SANYO MITSUBISHI DISH SHARP"));
|
||||
protocol = strtok(sirtype, " ");
|
||||
while (iridx) {
|
||||
iridx--;
|
||||
protocol = strtok(NULL, " ");
|
||||
}
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_IRRECEIVED "\":{\"" D_IR_PROTOCOL "\":\"%s\", \"" D_IR_BITS "\":%d, \"" D_IR_DATA "\":\"%X\"}}"),
|
||||
protocol, results.bits, results.value);
|
||||
mqtt_publish_topic_P(6, PSTR(D_IRRECEIVED));
|
||||
}
|
||||
irrecv->resume();
|
||||
const char *HVAC_Mode;
|
||||
const char *HVAC_FanMode;
|
||||
const char *HVAC_Vendor;
|
||||
int HVAC_Temp = 21;
|
||||
boolean HVAC_Power = true;
|
||||
|
||||
for (uint16_t i = 0; i <= sizeof(dataBufUc); i++) {
|
||||
dataBufUc[i] = toupper(dataBuf[i]);
|
||||
}
|
||||
if (!strcasecmp_P(type, PSTR(D_CMND_IRSEND))) {
|
||||
if (data_len) {
|
||||
StaticJsonBuffer<128> jsonBuf;
|
||||
JsonObject &ir_json = jsonBuf.parseObject(dataBufUc);
|
||||
if (!ir_json.success()) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRSEND "\":\"" D_INVALID_JSON "\"}")); // JSON decode failed
|
||||
}
|
||||
else {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRSEND "\":\"" D_DONE "\"}"));
|
||||
protocol = ir_json[D_IR_PROTOCOL];
|
||||
bits = ir_json[D_IR_BITS];
|
||||
data = ir_json[D_IR_DATA];
|
||||
if (protocol && bits && data) {
|
||||
if (!strcasecmp_P(protocol, PSTR("NEC")))
|
||||
irsend->sendNEC(data, bits);
|
||||
else if (!strcasecmp_P(protocol, PSTR("SONY")))
|
||||
irsend->sendSony(data, bits);
|
||||
else if (!strcasecmp_P(protocol, PSTR("RC5")))
|
||||
irsend->sendRC5(data, bits);
|
||||
else if (!strcasecmp_P(protocol, PSTR("RC6")))
|
||||
irsend->sendRC6(data, bits);
|
||||
else if (!strcasecmp_P(protocol, PSTR("DISH")))
|
||||
irsend->sendDISH(data, bits);
|
||||
else if (!strcasecmp_P(protocol, PSTR("JVC")))
|
||||
irsend->sendJVC(data, bits, 1);
|
||||
else if (!strcasecmp_P(protocol, PSTR("SAMSUNG")))
|
||||
irsend->sendSAMSUNG(data, bits);
|
||||
else {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRSEND "\":\"" D_PROTOCOL_NOT_SUPPORTED "\"}"));
|
||||
}
|
||||
}
|
||||
else {
|
||||
error = true;
|
||||
}
|
||||
}
|
||||
}
|
||||
else {
|
||||
error = true;
|
||||
}
|
||||
if (error) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRSEND "\":\"" D_NO " " D_IR_PROTOCOL ", " D_IR_BITS " " D_OR " " D_IR_DATA "\"}"));
|
||||
}
|
||||
}
|
||||
#ifdef USE_IR_HVAC
|
||||
else if (!strcasecmp_P(type, PSTR(D_CMND_IRHVAC))) {
|
||||
if (data_len) {
|
||||
StaticJsonBuffer<164> jsonBufer;
|
||||
JsonObject &root = jsonBufer.parseObject(dataBufUc);
|
||||
if (!root.success()) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRHVAC "\":\"" D_INVALID_JSON "\"}")); // JSON decode failed
|
||||
}
|
||||
else {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRHVAC "\":\"" D_DONE "\"}"));
|
||||
HVAC_Vendor = root[D_IRHVAC_VENDOR];
|
||||
HVAC_Power = root[D_IRHVAC_POWER];
|
||||
HVAC_Mode = root[D_IRHVAC_MODE];
|
||||
HVAC_FanMode = root[D_IRHVAC_FANSPEED];
|
||||
HVAC_Temp = root[D_IRHVAC_TEMP];
|
||||
|
||||
// snprintf_P(log_data, sizeof(log_data), PSTR("IRHVAC: Received Vendor %s, Power %d, Mode %s, FanSpeed %s, Temp %d"),
|
||||
// HVAC_Vendor, HVAC_Power, HVAC_Mode, HVAC_FanMode, HVAC_Temp);
|
||||
// addLog(LOG_LEVEL_DEBUG);
|
||||
|
||||
if (HVAC_Vendor == NULL || !strcasecmp_P(HVAC_Vendor, PSTR("TOSHIBA"))) {
|
||||
error = ir_hvac_toshiba(HVAC_Mode, HVAC_FanMode, HVAC_Power, HVAC_Temp);
|
||||
}
|
||||
else if (!strcasecmp_P(HVAC_Vendor, PSTR("MITSUBISHI"))) {
|
||||
error = ir_hvac_mitsubishi(HVAC_Mode, HVAC_FanMode, HVAC_Power, HVAC_Temp);
|
||||
}
|
||||
else {
|
||||
error = true;
|
||||
}
|
||||
}
|
||||
}
|
||||
else {
|
||||
error = true;
|
||||
}
|
||||
if (error) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRHVAC "\":\"" D_WRONG " " D_IRHVAC_VENDOR ", " D_IRHVAC_MODE " " D_OR " " D_IRHVAC_FANSPEED "\"}"));
|
||||
}
|
||||
}
|
||||
#endif // USE_IR_HVAC
|
||||
else {
|
||||
serviced = false; // Unknown command
|
||||
}
|
||||
return serviced;
|
||||
}
|
||||
#endif // USE_IR_RECEIVE
|
||||
#endif // USE_IR_REMOTE
|
||||
#endif // USE_IR_REMOTE
|
||||
|
|
|
|||
|
|
@ -91,7 +91,7 @@ void sb_received()
|
|||
mqtt_publish_topic_P(6, PSTR(D_RFRECEIVED));
|
||||
#ifdef USE_DOMOTICZ
|
||||
domoticz_sensor(DZ_COUNT, rid); // Send rid as Domoticz Counter value
|
||||
#endif // USE_DOMOTICZ
|
||||
#endif // USE_DOMOTICZ
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -294,6 +294,7 @@ char* sl_getColor(char* scolor)
|
|||
void sl_prepPower()
|
||||
{
|
||||
char scolor[11];
|
||||
char scommand[16];
|
||||
|
||||
if (sysCfg.led_dimmer && !(sl_power)) {
|
||||
do_cmnd_power(Maxdevice, 7); // No publishPowerState
|
||||
|
|
@ -305,12 +306,14 @@ void sl_prepPower()
|
|||
// mqtt_publishDomoticzPowerState(1);
|
||||
domoticz_updatePowerState(Maxdevice);
|
||||
#endif // USE_DOMOTICZ
|
||||
|
||||
getPowerDevice(scommand, Maxdevice, sizeof(scommand));
|
||||
if ((sfl_flg &7) > 1) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_RSLT_POWER "\":\"%s\", \"" D_CMND_DIMMER "\":%d, \"" D_CMND_COLOR "\":\"%s\"}"),
|
||||
getStateText(sl_power), sysCfg.led_dimmer, sl_getColor(scolor));
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"%s\":\"%s\", \"" D_CMND_DIMMER "\":%d, \"" D_CMND_COLOR "\":\"%s\"}"),
|
||||
scommand, getStateText(sl_power), sysCfg.led_dimmer, sl_getColor(scolor));
|
||||
} else {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_RSLT_POWER "\":\"%s\", \"" D_CMND_DIMMER "\":%d}"),
|
||||
getStateText(sl_power), sysCfg.led_dimmer);
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"%s\":\"%s\", \"" D_CMND_DIMMER "\":%d}"),
|
||||
scommand, getStateText(sl_power), sysCfg.led_dimmer);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -25,42 +25,41 @@
|
|||
* Source: Heiko Krupp and Adafruit Industries
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define BMP_ADDR 0x77
|
||||
#define BMP_ADDR 0x77
|
||||
|
||||
#define BMP180_CHIPID 0x55
|
||||
#define BMP280_CHIPID 0x58
|
||||
#define BME280_CHIPID 0x60
|
||||
#define BMP180_CHIPID 0x55
|
||||
#define BMP280_CHIPID 0x58
|
||||
#define BME280_CHIPID 0x60
|
||||
|
||||
#define BMP_REGISTER_CHIPID 0xD0
|
||||
#define BMP_REGISTER_CHIPID 0xD0
|
||||
|
||||
double bmp_sealevel = 0.0;
|
||||
uint8_t bmpaddr;
|
||||
uint8_t bmptype = 0;
|
||||
char bmpstype[7];
|
||||
|
||||
/*********************************************************************************************\
|
||||
* BMP085 and BME180
|
||||
*
|
||||
* Programmer : Heiko Krupp with changes from Theo Arends
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define BMP180_REG_CONTROL 0xF4
|
||||
#define BMP180_REG_RESULT 0xF6
|
||||
#define BMP180_TEMPERATURE 0x2E
|
||||
#define BMP180_PRESSURE3 0xF4 // Max. oversampling -> OSS = 3
|
||||
#define BMP180_REG_CONTROL 0xF4
|
||||
#define BMP180_REG_RESULT 0xF6
|
||||
#define BMP180_TEMPERATURE 0x2E
|
||||
#define BMP180_PRESSURE3 0xF4 // Max. oversampling -> OSS = 3
|
||||
|
||||
#define BMP180_AC1 0xAA
|
||||
#define BMP180_AC2 0xAC
|
||||
#define BMP180_AC3 0xAE
|
||||
#define BMP180_AC4 0xB0
|
||||
#define BMP180_AC5 0xB2
|
||||
#define BMP180_AC6 0xB4
|
||||
#define BMP180_VB1 0xB6
|
||||
#define BMP180_VB2 0xB8
|
||||
#define BMP180_MB 0xBA
|
||||
#define BMP180_MC 0xBC
|
||||
#define BMP180_MD 0xBE
|
||||
#define BMP180_AC1 0xAA
|
||||
#define BMP180_AC2 0xAC
|
||||
#define BMP180_AC3 0xAE
|
||||
#define BMP180_AC4 0xB0
|
||||
#define BMP180_AC5 0xB2
|
||||
#define BMP180_AC6 0xB4
|
||||
#define BMP180_VB1 0xB6
|
||||
#define BMP180_VB2 0xB8
|
||||
#define BMP180_MB 0xBA
|
||||
#define BMP180_MC 0xBC
|
||||
#define BMP180_MD 0xBE
|
||||
|
||||
#define BMP180_OSS 3
|
||||
#define BMP180_OSS 3
|
||||
|
||||
int16_t cal_ac1;
|
||||
int16_t cal_ac2;
|
||||
|
|
@ -82,29 +81,28 @@ boolean bmp180_calibration()
|
|||
cal_ac4 = i2c_read16(bmpaddr, BMP180_AC4);
|
||||
cal_ac5 = i2c_read16(bmpaddr, BMP180_AC5);
|
||||
cal_ac6 = i2c_read16(bmpaddr, BMP180_AC6);
|
||||
cal_b1 = i2c_read16(bmpaddr, BMP180_VB1);
|
||||
cal_b2 = i2c_read16(bmpaddr, BMP180_VB2);
|
||||
cal_mc = i2c_read16(bmpaddr, BMP180_MC);
|
||||
cal_md = i2c_read16(bmpaddr, BMP180_MD);
|
||||
cal_b1 = i2c_read16(bmpaddr, BMP180_VB1);
|
||||
cal_b2 = i2c_read16(bmpaddr, BMP180_VB2);
|
||||
cal_mc = i2c_read16(bmpaddr, BMP180_MC);
|
||||
cal_md = i2c_read16(bmpaddr, BMP180_MD);
|
||||
|
||||
// Check for Errors in calibration data. Value never is 0x0000 or 0xFFFF
|
||||
if (!cal_ac1 | !cal_ac2 | !cal_ac3 | !cal_ac4 | !cal_ac5 | !cal_ac6 | !cal_b1 | !cal_b2 | !cal_mc | !cal_md) {
|
||||
return false;
|
||||
}
|
||||
|
||||
if ((cal_ac1 == 0xFFFF)|
|
||||
(cal_ac2 == 0xFFFF)|
|
||||
(cal_ac3 == 0xFFFF)|
|
||||
(cal_ac4 == 0xFFFF)|
|
||||
(cal_ac5 == 0xFFFF)|
|
||||
(cal_ac6 == 0xFFFF)|
|
||||
(cal_b1 == 0xFFFF)|
|
||||
(cal_b2 == 0xFFFF)|
|
||||
(cal_mc == 0xFFFF)|
|
||||
if ((cal_ac1 == 0xFFFF) |
|
||||
(cal_ac2 == 0xFFFF) |
|
||||
(cal_ac3 == 0xFFFF) |
|
||||
(cal_ac4 == 0xFFFF) |
|
||||
(cal_ac5 == 0xFFFF) |
|
||||
(cal_ac6 == 0xFFFF) |
|
||||
(cal_b1 == 0xFFFF) |
|
||||
(cal_b2 == 0xFFFF) |
|
||||
(cal_mc == 0xFFFF) |
|
||||
(cal_md == 0xFFFF)) {
|
||||
return false;
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
|
|
@ -114,10 +112,10 @@ double bmp180_readTemperature()
|
|||
delay(5); // 5ms conversion time
|
||||
int ut = i2c_read16(bmpaddr, BMP180_REG_RESULT);
|
||||
int32_t x1 = (ut - (int32_t)cal_ac6) * ((int32_t)cal_ac5) >> 15;
|
||||
int32_t x2 = ((int32_t)cal_mc << 11) / (x1+(int32_t)cal_md);
|
||||
bmp180_b5=x1+x2;
|
||||
int32_t x2 = ((int32_t)cal_mc << 11) / (x1 + (int32_t)cal_md);
|
||||
bmp180_b5 = x1 + x2;
|
||||
|
||||
return ((bmp180_b5+8)>>4)/10.0;
|
||||
return ((bmp180_b5 + 8) >> 4) / 10.0;
|
||||
}
|
||||
|
||||
double bmp180_readPressure()
|
||||
|
|
@ -128,25 +126,26 @@ double bmp180_readPressure()
|
|||
uint8_t xlsb;
|
||||
|
||||
i2c_write8(bmpaddr, BMP180_REG_CONTROL, BMP180_PRESSURE3); // Highest resolution
|
||||
delay(2 + (4 << BMP180_OSS)); // 26ms conversion time at ultra high resolution
|
||||
delay(2 + (4 << BMP180_OSS)); // 26ms conversion time at ultra high resolution
|
||||
uint32_t up = i2c_read24(bmpaddr, BMP180_REG_RESULT);
|
||||
up >>= (8 - BMP180_OSS);
|
||||
|
||||
int32_t b6 = bmp180_b5 - 4000;
|
||||
int32_t x1 = ((int32_t)cal_b2 * ( (b6 * b6)>>12 )) >> 11;
|
||||
int32_t x1 = ((int32_t)cal_b2 * ((b6 * b6) >> 12)) >> 11;
|
||||
int32_t x2 = ((int32_t)cal_ac2 * b6) >> 11;
|
||||
int32_t x3 = x1 + x2;
|
||||
int32_t b3 = ((((int32_t)cal_ac1*4 + x3) << BMP180_OSS) + 2)>>2;
|
||||
int32_t b3 = ((((int32_t)cal_ac1 * 4 + x3) << BMP180_OSS) + 2) >> 2;
|
||||
|
||||
x1 = ((int32_t)cal_ac3 * b6) >> 13;
|
||||
x2 = ((int32_t)cal_b1 * ((b6 * b6) >> 12)) >> 16;
|
||||
x3 = ((x1 + x2) + 2) >> 2;
|
||||
uint32_t b4 = ((uint32_t)cal_ac4 * (uint32_t)(x3 + 32768)) >> 15;
|
||||
uint32_t b7 = ((uint32_t)up - b3) * (uint32_t)( 50000UL >> BMP180_OSS);
|
||||
uint32_t b7 = ((uint32_t)up - b3) * (uint32_t)(50000UL >> BMP180_OSS);
|
||||
|
||||
if (b7 < 0x80000000) {
|
||||
p = (b7 * 2) / b4;
|
||||
} else {
|
||||
}
|
||||
else {
|
||||
p = (b7 / b4) * 2;
|
||||
}
|
||||
|
||||
|
|
@ -154,14 +153,14 @@ double bmp180_readPressure()
|
|||
x1 = (x1 * 3038) >> 16;
|
||||
x2 = (-7357 * p) >> 16;
|
||||
|
||||
p += ((x1 + x2 + (int32_t)3791)>>4);
|
||||
return p/100.0; // convert to mbar
|
||||
p += ((x1 + x2 + (int32_t)3791) >> 4);
|
||||
return p / 100.0; // convert to mbar
|
||||
}
|
||||
|
||||
double bmp180_calcSealevelPressure(float pAbs, float altitude_meters)
|
||||
{
|
||||
double pressure = pAbs*100.0;
|
||||
return (double)(pressure / pow(1.0-altitude_meters/44330, 5.255))/100.0;
|
||||
double pressure = pAbs * 100.0;
|
||||
return (double)(pressure / pow(1.0 - altitude_meters / 44330, 5.255)) / 100.0;
|
||||
}
|
||||
|
||||
/*********************************************************************************************\
|
||||
|
|
@ -170,58 +169,58 @@ double bmp180_calcSealevelPressure(float pAbs, float altitude_meters)
|
|||
* Programmer : BMP280/BME280 Datasheet and Adafruit with changes by Theo Arends
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define BME280_REGISTER_CONTROLHUMID 0xF2
|
||||
#define BME280_REGISTER_CONTROL 0xF4
|
||||
#define BME280_REGISTER_PRESSUREDATA 0xF7
|
||||
#define BME280_REGISTER_TEMPDATA 0xFA
|
||||
#define BME280_REGISTER_HUMIDDATA 0xFD
|
||||
#define BME280_REGISTER_CONTROLHUMID 0xF2
|
||||
#define BME280_REGISTER_CONTROL 0xF4
|
||||
#define BME280_REGISTER_PRESSUREDATA 0xF7
|
||||
#define BME280_REGISTER_TEMPDATA 0xFA
|
||||
#define BME280_REGISTER_HUMIDDATA 0xFD
|
||||
|
||||
#define BME280_REGISTER_DIG_T1 0x88
|
||||
#define BME280_REGISTER_DIG_T2 0x8A
|
||||
#define BME280_REGISTER_DIG_T3 0x8C
|
||||
#define BME280_REGISTER_DIG_P1 0x8E
|
||||
#define BME280_REGISTER_DIG_P2 0x90
|
||||
#define BME280_REGISTER_DIG_P3 0x92
|
||||
#define BME280_REGISTER_DIG_P4 0x94
|
||||
#define BME280_REGISTER_DIG_P5 0x96
|
||||
#define BME280_REGISTER_DIG_P6 0x98
|
||||
#define BME280_REGISTER_DIG_P7 0x9A
|
||||
#define BME280_REGISTER_DIG_P8 0x9C
|
||||
#define BME280_REGISTER_DIG_P9 0x9E
|
||||
#define BME280_REGISTER_DIG_H1 0xA1
|
||||
#define BME280_REGISTER_DIG_H2 0xE1
|
||||
#define BME280_REGISTER_DIG_H3 0xE3
|
||||
#define BME280_REGISTER_DIG_H4 0xE4
|
||||
#define BME280_REGISTER_DIG_H5 0xE5
|
||||
#define BME280_REGISTER_DIG_H6 0xE7
|
||||
#define BME280_REGISTER_DIG_T1 0x88
|
||||
#define BME280_REGISTER_DIG_T2 0x8A
|
||||
#define BME280_REGISTER_DIG_T3 0x8C
|
||||
#define BME280_REGISTER_DIG_P1 0x8E
|
||||
#define BME280_REGISTER_DIG_P2 0x90
|
||||
#define BME280_REGISTER_DIG_P3 0x92
|
||||
#define BME280_REGISTER_DIG_P4 0x94
|
||||
#define BME280_REGISTER_DIG_P5 0x96
|
||||
#define BME280_REGISTER_DIG_P6 0x98
|
||||
#define BME280_REGISTER_DIG_P7 0x9A
|
||||
#define BME280_REGISTER_DIG_P8 0x9C
|
||||
#define BME280_REGISTER_DIG_P9 0x9E
|
||||
#define BME280_REGISTER_DIG_H1 0xA1
|
||||
#define BME280_REGISTER_DIG_H2 0xE1
|
||||
#define BME280_REGISTER_DIG_H3 0xE3
|
||||
#define BME280_REGISTER_DIG_H4 0xE4
|
||||
#define BME280_REGISTER_DIG_H5 0xE5
|
||||
#define BME280_REGISTER_DIG_H6 0xE7
|
||||
|
||||
struct bme280_calib_data
|
||||
{
|
||||
uint16_t dig_T1;
|
||||
int16_t dig_T2;
|
||||
int16_t dig_T3;
|
||||
int16_t dig_T2;
|
||||
int16_t dig_T3;
|
||||
uint16_t dig_P1;
|
||||
int16_t dig_P2;
|
||||
int16_t dig_P3;
|
||||
int16_t dig_P4;
|
||||
int16_t dig_P5;
|
||||
int16_t dig_P6;
|
||||
int16_t dig_P7;
|
||||
int16_t dig_P8;
|
||||
int16_t dig_P9;
|
||||
uint8_t dig_H1;
|
||||
int16_t dig_H2;
|
||||
uint8_t dig_H3;
|
||||
int16_t dig_H4;
|
||||
int16_t dig_H5;
|
||||
int8_t dig_H6;
|
||||
int16_t dig_P2;
|
||||
int16_t dig_P3;
|
||||
int16_t dig_P4;
|
||||
int16_t dig_P5;
|
||||
int16_t dig_P6;
|
||||
int16_t dig_P7;
|
||||
int16_t dig_P8;
|
||||
int16_t dig_P9;
|
||||
uint8_t dig_H1;
|
||||
int16_t dig_H2;
|
||||
uint8_t dig_H3;
|
||||
int16_t dig_H4;
|
||||
int16_t dig_H5;
|
||||
int8_t dig_H6;
|
||||
} _bme280_calib;
|
||||
|
||||
int32_t t_fine;
|
||||
|
||||
boolean bmp280_calibrate()
|
||||
{
|
||||
// if (i2c_read8(bmpaddr, BMP_REGISTER_CHIPID) != BMP280_CHIPID) return false;
|
||||
// if (i2c_read8(bmpaddr, BMP_REGISTER_CHIPID) != BMP280_CHIPID) return false;
|
||||
|
||||
_bme280_calib.dig_T1 = i2c_read16_LE(bmpaddr, BME280_REGISTER_DIG_T1);
|
||||
_bme280_calib.dig_T2 = i2c_readS16_LE(bmpaddr, BME280_REGISTER_DIG_T2);
|
||||
|
|
@ -236,15 +235,15 @@ boolean bmp280_calibrate()
|
|||
_bme280_calib.dig_P8 = i2c_readS16_LE(bmpaddr, BME280_REGISTER_DIG_P8);
|
||||
_bme280_calib.dig_P9 = i2c_readS16_LE(bmpaddr, BME280_REGISTER_DIG_P9);
|
||||
|
||||
// i2c_write8(bmpaddr, BME280_REGISTER_CONTROL, 0x3F); // Temp 1x oversampling, Press 16x oversampling, normal mode (Adafruit)
|
||||
i2c_write8(bmpaddr, BME280_REGISTER_CONTROL, 0xB7); // 16x oversampling, normal mode (Adafruit)
|
||||
// i2c_write8(bmpaddr, BME280_REGISTER_CONTROL, 0x3F); // Temp 1x oversampling, Press 16x oversampling, normal mode (Adafruit)
|
||||
i2c_write8(bmpaddr, BME280_REGISTER_CONTROL, 0xB7); // 16x oversampling, normal mode (Adafruit)
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
boolean bme280_calibrate()
|
||||
{
|
||||
// if (i2c_read8(bmpaddr, BMP_REGISTER_CHIPID) != BME280_CHIPID) return false;
|
||||
// if (i2c_read8(bmpaddr, BMP_REGISTER_CHIPID) != BME280_CHIPID) return false;
|
||||
|
||||
_bme280_calib.dig_T1 = i2c_read16_LE(bmpaddr, BME280_REGISTER_DIG_T1);
|
||||
_bme280_calib.dig_T2 = i2c_readS16_LE(bmpaddr, BME280_REGISTER_DIG_T2);
|
||||
|
|
@ -266,8 +265,8 @@ boolean bme280_calibrate()
|
|||
_bme280_calib.dig_H6 = (int8_t)i2c_read8(bmpaddr, BME280_REGISTER_DIG_H6);
|
||||
|
||||
// Set before CONTROL_meas (DS 5.4.3)
|
||||
i2c_write8(bmpaddr, BME280_REGISTER_CONTROLHUMID, 0x05); // 16x oversampling (Adafruit)
|
||||
i2c_write8(bmpaddr, BME280_REGISTER_CONTROL, 0xB7); // 16x oversampling, normal mode (Adafruit)
|
||||
i2c_write8(bmpaddr, BME280_REGISTER_CONTROLHUMID, 0x05); // 16x oversampling (Adafruit)
|
||||
i2c_write8(bmpaddr, BME280_REGISTER_CONTROL, 0xB7); // 16x oversampling, normal mode (Adafruit)
|
||||
|
||||
return true;
|
||||
}
|
||||
|
|
@ -280,11 +279,12 @@ double bmp280_readTemperature(void)
|
|||
int32_t adc_T = i2c_read24(bmpaddr, BME280_REGISTER_TEMPDATA);
|
||||
adc_T >>= 4;
|
||||
|
||||
var1 = ((((adc_T>>3) - ((int32_t)_bme280_calib.dig_T1 <<1))) * ((int32_t)_bme280_calib.dig_T2)) >> 11;
|
||||
var2 = (((((adc_T>>4) - ((int32_t)_bme280_calib.dig_T1)) * ((adc_T>>4) - ((int32_t)_bme280_calib.dig_T1))) >> 12) *
|
||||
((int32_t)_bme280_calib.dig_T3)) >> 14;
|
||||
var1 = ((((adc_T >> 3) - ((int32_t)_bme280_calib.dig_T1 << 1))) * ((int32_t)_bme280_calib.dig_T2)) >> 11;
|
||||
var2 = (((((adc_T >> 4) - ((int32_t)_bme280_calib.dig_T1)) * ((adc_T >> 4) - ((int32_t)_bme280_calib.dig_T1))) >> 12) *
|
||||
((int32_t)_bme280_calib.dig_T3)) >>
|
||||
14;
|
||||
t_fine = var1 + var2;
|
||||
double T = (t_fine * 5 + 128) >> 8;
|
||||
double T = (t_fine * 5 + 128) >> 8;
|
||||
return T / 100.0;
|
||||
}
|
||||
|
||||
|
|
@ -294,8 +294,8 @@ double bmp280_readPressure(void)
|
|||
int64_t var2;
|
||||
int64_t p;
|
||||
|
||||
// Must be done first to get the t_fine variable set up
|
||||
// bmp280_readTemperature();
|
||||
// Must be done first to get the t_fine variable set up
|
||||
// bmp280_readTemperature();
|
||||
|
||||
int32_t adc_P = i2c_read24(bmpaddr, BME280_REGISTER_PRESSUREDATA);
|
||||
adc_P >>= 4;
|
||||
|
|
@ -307,7 +307,7 @@ double bmp280_readPressure(void)
|
|||
var1 = ((var1 * var1 * (int64_t)_bme280_calib.dig_P3) >> 8) + ((var1 * (int64_t)_bme280_calib.dig_P2) << 12);
|
||||
var1 = (((((int64_t)1) << 47) + var1)) * ((int64_t)_bme280_calib.dig_P1) >> 33;
|
||||
if (0 == var1) {
|
||||
return 0; // avoid exception caused by division by zero
|
||||
return 0; // avoid exception caused by division by zero
|
||||
}
|
||||
p = 1048576 - adc_P;
|
||||
p = (((p << 31) - var2) * 3125) / var1;
|
||||
|
|
@ -321,35 +321,67 @@ double bme280_readHumidity(void)
|
|||
{
|
||||
int32_t v_x1_u32r;
|
||||
|
||||
// Must be done first to get the t_fine variable set up
|
||||
// bmp280_readTemperature();
|
||||
// Must be done first to get the t_fine variable set up
|
||||
// bmp280_readTemperature();
|
||||
|
||||
int32_t adc_H = i2c_read16(bmpaddr, BME280_REGISTER_HUMIDDATA);
|
||||
|
||||
v_x1_u32r = (t_fine - ((int32_t)76800));
|
||||
|
||||
v_x1_u32r = (((((adc_H << 14) - (((int32_t)_bme280_calib.dig_H4) << 20) -
|
||||
(((int32_t)_bme280_calib.dig_H5) * v_x1_u32r)) + ((int32_t)16384)) >> 15) *
|
||||
(((((((v_x1_u32r * ((int32_t)_bme280_calib.dig_H6)) >> 10) *
|
||||
(((v_x1_u32r * ((int32_t)_bme280_calib.dig_H3)) >> 11) + ((int32_t)32768))) >> 10) +
|
||||
((int32_t)2097152)) * ((int32_t)_bme280_calib.dig_H2) + 8192) >> 14));
|
||||
(((int32_t)_bme280_calib.dig_H5) * v_x1_u32r)) +
|
||||
((int32_t)16384)) >>
|
||||
15) *
|
||||
(((((((v_x1_u32r * ((int32_t)_bme280_calib.dig_H6)) >> 10) *
|
||||
(((v_x1_u32r * ((int32_t)_bme280_calib.dig_H3)) >> 11) + ((int32_t)32768))) >>
|
||||
10) +
|
||||
((int32_t)2097152)) *
|
||||
((int32_t)_bme280_calib.dig_H2) +
|
||||
8192) >>
|
||||
14));
|
||||
v_x1_u32r = (v_x1_u32r - (((((v_x1_u32r >> 15) * (v_x1_u32r >> 15)) >> 7) *
|
||||
((int32_t)_bme280_calib.dig_H1)) >> 4));
|
||||
((int32_t)_bme280_calib.dig_H1)) >>
|
||||
4));
|
||||
v_x1_u32r = (v_x1_u32r < 0) ? 0 : v_x1_u32r;
|
||||
v_x1_u32r = (v_x1_u32r > 419430400) ? 419430400 : v_x1_u32r;
|
||||
double h = (v_x1_u32r >> 12);
|
||||
return h / 1024.0;
|
||||
return h / 1024.0;
|
||||
}
|
||||
|
||||
/*********************************************************************************************\
|
||||
* BMP
|
||||
\*********************************************************************************************/
|
||||
|
||||
double fastPrecisePow(double a, double b)
|
||||
{
|
||||
// https://martin.ankerl.com/2012/01/25/optimized-approximative-pow-in-c-and-cpp/
|
||||
// calculate approximation with fraction of the exponent
|
||||
int e = (int)b;
|
||||
union {
|
||||
double d;
|
||||
int x[2];
|
||||
} u = { a };
|
||||
u.x[1] = (int)((b - e) * (u.x[1] - 1072632447) + 1072632447);
|
||||
u.x[0] = 0;
|
||||
// exponentiation by squaring with the exponent's integer part
|
||||
// double r = u.d makes everything much slower, not sure why
|
||||
double r = 1.0;
|
||||
while (e) {
|
||||
if (e & 1) {
|
||||
r *= a;
|
||||
}
|
||||
a *= a;
|
||||
e >>= 1;
|
||||
}
|
||||
return r * u.d;
|
||||
}
|
||||
|
||||
double bmp_readTemperature(void)
|
||||
{
|
||||
double t = NAN;
|
||||
|
||||
switch (bmptype) {
|
||||
switch (bmptype)
|
||||
{
|
||||
case BMP180_CHIPID:
|
||||
t = bmp180_readTemperature();
|
||||
break;
|
||||
|
|
@ -357,7 +389,8 @@ double bmp_readTemperature(void)
|
|||
case BME280_CHIPID:
|
||||
t = bmp280_readTemperature();
|
||||
}
|
||||
if (!isnan(t)) {
|
||||
if (!isnan(t))
|
||||
{
|
||||
t = convertTemp(t);
|
||||
return t;
|
||||
}
|
||||
|
|
@ -366,14 +399,20 @@ double bmp_readTemperature(void)
|
|||
|
||||
double bmp_readPressure(void)
|
||||
{
|
||||
double pressure = 0.0;
|
||||
|
||||
switch (bmptype) {
|
||||
case BMP180_CHIPID:
|
||||
return bmp180_readPressure();
|
||||
pressure = bmp180_readPressure();
|
||||
case BMP280_CHIPID:
|
||||
case BME280_CHIPID:
|
||||
return bmp280_readPressure();
|
||||
pressure = bmp280_readPressure();
|
||||
}
|
||||
return 0;
|
||||
if (pressure != 0.0) {
|
||||
// bmp_sealevel = pressure / pow(1.0 - ((float)sysCfg.altitude / 44330.0), 5.255); // Adds 8k to the code
|
||||
bmp_sealevel = (pressure / fastPrecisePow(1.0 - ((float)sysCfg.altitude / 44330.0), 5.255)) - 21.6;
|
||||
}
|
||||
return pressure;
|
||||
}
|
||||
|
||||
double bmp_readHumidity(void)
|
||||
|
|
@ -419,7 +458,8 @@ boolean bmp_detect()
|
|||
if (success) {
|
||||
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_I2C "%s " D_FOUND_AT " 0x%x"), bmpstype, bmpaddr);
|
||||
addLog(LOG_LEVEL_DEBUG);
|
||||
} else {
|
||||
}
|
||||
else {
|
||||
bmptype = 0;
|
||||
}
|
||||
return success;
|
||||
|
|
@ -429,7 +469,7 @@ boolean bmp_detect()
|
|||
* Presentation
|
||||
\*********************************************************************************************/
|
||||
|
||||
void bmp_mqttPresent(uint8_t* djson)
|
||||
void bmp_mqttPresent(uint8_t *djson)
|
||||
{
|
||||
if (!bmptype) {
|
||||
return;
|
||||
|
|
@ -438,6 +478,8 @@ void bmp_mqttPresent(uint8_t* djson)
|
|||
char stemp1[10];
|
||||
char stemp2[10];
|
||||
char stemp3[10];
|
||||
char stemp4[10];
|
||||
char sealevel[40];
|
||||
|
||||
double t = bmp_readTemperature();
|
||||
double p = bmp_readPressure();
|
||||
|
|
@ -445,17 +487,21 @@ void bmp_mqttPresent(uint8_t* djson)
|
|||
dtostrfd(t, sysCfg.flag.temperature_resolution, stemp1);
|
||||
dtostrfd(p, sysCfg.flag.pressure_resolution, stemp2);
|
||||
dtostrfd(h, sysCfg.flag.humidity_resolution, stemp3);
|
||||
if (!strcmp(bmpstype,"BME280")) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s, \"%s\":{\"" D_TEMPERATURE "\":%s, \"" D_HUMIDITY "\":%s, \"" D_PRESSURE "\":%s}"),
|
||||
mqtt_data, bmpstype, stemp1, stemp3, stemp2);
|
||||
} else {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s, \"%s\":{\"" D_TEMPERATURE "\":%s, \"" D_PRESSURE "\":%s}"),
|
||||
mqtt_data, bmpstype, stemp1, stemp2);
|
||||
|
||||
dtostrfd(bmp_sealevel, sysCfg.flag.pressure_resolution, stemp4);
|
||||
snprintf_P(sealevel, sizeof(sealevel), PSTR(", \"" D_PRESSUREATSEALEVEL "\":%s"), stemp4);
|
||||
if (!strcmp(bmpstype, "BME280")) {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s, \"%s\":{\"" D_TEMPERATURE "\":%s, \"" D_HUMIDITY "\":%s, \"" D_PRESSURE "\":%s%s}"),
|
||||
mqtt_data, bmpstype, stemp1, stemp3, stemp2, (sysCfg.altitude != 0) ? sealevel : "");
|
||||
}
|
||||
else {
|
||||
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s, \"%s\":{\"" D_TEMPERATURE "\":%s, \"" D_PRESSURE "\":%s%s}"),
|
||||
mqtt_data, bmpstype, stemp1, stemp2, (sysCfg.altitude != 0) ? sealevel : "");
|
||||
}
|
||||
*djson = 1;
|
||||
#ifdef USE_DOMOTICZ
|
||||
domoticz_sensor3(stemp1, stemp3, stemp2);
|
||||
#endif // USE_DOMOTICZ
|
||||
#endif // USE_DOMOTICZ
|
||||
}
|
||||
|
||||
#ifdef USE_WEBSERVER
|
||||
|
|
@ -472,7 +518,7 @@ String bmp_webPresent()
|
|||
dtostrfi(t_bmp, sysCfg.flag.temperature_resolution, stemp);
|
||||
snprintf_P(sensor, sizeof(sensor), HTTP_SNS_TEMP, bmpstype, stemp, tempUnit());
|
||||
page += sensor;
|
||||
if (!strcmp(bmpstype,"BME280")) {
|
||||
if (!strcmp(bmpstype, "BME280")) {
|
||||
dtostrfi(h_bmp, sysCfg.flag.humidity_resolution, stemp);
|
||||
snprintf_P(sensor, sizeof(sensor), HTTP_SNS_HUM, bmpstype, stemp);
|
||||
page += sensor;
|
||||
|
|
@ -480,10 +526,14 @@ String bmp_webPresent()
|
|||
dtostrfi(p_bmp, sysCfg.flag.pressure_resolution, stemp);
|
||||
snprintf_P(sensor, sizeof(sensor), HTTP_SNS_PRESSURE, bmpstype, stemp);
|
||||
page += sensor;
|
||||
if (sysCfg.altitude != 0) {
|
||||
dtostrfi(bmp_sealevel, sysCfg.flag.pressure_resolution, stemp);
|
||||
snprintf_P(sensor, sizeof(sensor), HTTP_SNS_PRESSUREATSEALEVEL, bmpstype, stemp);
|
||||
page += sensor;
|
||||
}
|
||||
}
|
||||
return page;
|
||||
}
|
||||
#endif // USE_WEBSERVER
|
||||
#endif // USE_BMP
|
||||
#endif // USE_I2C
|
||||
|
||||
#endif // USE_WEBSERVER
|
||||
#endif // USE_BMP
|
||||
#endif // USE_I2C
|
||||
|
|
|
|||
Loading…
Reference in New Issue