Fix button default state

- Fix button default state
- Bump version 8.3.0.1

RELEASENOTES.md

@@ -52,57 +52,6 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
 
 ## Changelog
 
-### Version 8.3.0 Fred
+### Version 8.3.0.1
 
-- Breaking Change Device Groups multicast address and port  (#8270)
-- Change PWM implementation to Arduino #7231 removing support for Core versions before 2.6.3
-- Change default PWM Frequency to 977 Hz from 880 Hz
-- Change minimum PWM Frequency from 100 Hz to 40 Hz
-- Change flash access removing support for any Core before 2.6.3
-- Change HM-10 sensor type detection and add features (#7962)
-- Change light scheme 2,3,4 cycle time speed from 24,48,72,... seconds to 4,6,12,24,36,48,... seconds (#8034)
-- Change remove floating point libs from IRAM
-- Change remove MQTT Info messages on restart for DeepSleep Wake (#8044)
-- Change IRremoteESP8266 library updated to v2.7.6
-- Change HAss discovery by Federico Leoni (#8370)
-- Fix possible Relay toggle on (OTA) restart
-- Fix PWM flickering during wifi connection (#8046)
-- Fix Zigbee sending wrong Sat value with Hue emulation
-- Fix Zigbee crash with Occupancy sensor (#8089)
-- Add Zigbee command ``ZbRestore`` to restore device configuration dumped with ``ZbStatus 2``
-- Add Zigbee command ``ZbUnbind``
-- Add Zigbee command ``ZbBindState`` and ``manuf``attribute
-- Add Zigbee command ``ZbConfig`` and configuration in Settings
-- Add commands ``CounterDebounceLow`` and ``CounterDebounceHigh`` to control debouncing (#8021)
-- Add commands ``NrfPage``, ``NrfIgnore``, ``NrfScan`` and ``NrfBeacon`` to NRF24 Bluetooth driver (#8075)
-- Add commands ``GlobalTemp`` and ``GlobalHum`` to init sensor data (#8152)
-- Add command ``SO`` as shortcut for command ``SetOption``
-- Add command ``SetOption41 <x>`` to force sending gratuitous ARP every <x> seconds
-- Add command ``SetOption73 1`` for button decoupling and send multi-press and hold MQTT messages by Federico Leoni (#8235)
-- Add command ``SetOption90 1`` to disable non-json MQTT messages (#8044)
-- Add command ``SetOption91 1`` to enable fading at startup / power on
-- Add command ``SetOption92 1`` to set PWM Mode from regular PWM to ColorTemp control (Xiaomi Philips ...)
-- Add command ``SetOption93 1`` to control caching of compressed rules
-- Add command ``Sensor10 0/1/2`` to control BH1750 resolution - 0 = High (default), 1 = High2, 2 = Low (#8016)
-- Add command ``Sensor10 31..254`` to control BH1750 measurement time which defaults to 69 (#8016)
-- Add command ``Sensor18 0..32000`` to control PMS5003 sensor interval to extend lifetime by Gene Ruebsamen (#8128)
-- Add command ``DevGroupName`` to specify up to four Device Group Names (#8087)
-- Add command ``DevGroupSend`` to send an update to a Device Group (#8093)
-- Add command ``Ping`` (#7176)
-- Add command ``Palette`` to add the ability to specify a palette of colors (#8150)
-- Add support for unreachable (unplugged) Zigbee devices in Philips Hue emulation and Alexa
-- Add support for 64x48 SSD1306 OLED (#6740)
-- Add support for Seven Segment display using HT16K33 (#8116)
-- Add support for up to four MQTT GroupTopics (#8014)
-- Add support for longer template names
-- Add support for an iAQ sensor (#8107)
-- Add support for AS3935 Lightning Sensor by device111 (#8130)
-- Add console command history (#7483, #8015)
-- Add quick wifi reconnect using saved AP parameters when ``SetOption56 0`` (#3189)
-- Add more accuracy to GPS NTP server (#8088)
-- Add support for analog anemometer by Matteo Albinola (#8283)
-- Add support for OpenTherm by Yuriy Sannikov (#8373)
-- Add support for Thermostat control by arijav (#8212)
-- Add experimental basic support for Tasmota on ESP32 based on work by Jörg Schüler-Maroldt
-- Add automatic compression of Rules to achieve ~60% compression by Stefan Hadinger
-- Add rule trigger at root level like ``on loadavg<50 do power 2 endon`` after ``state`` command
+- Fix default state of ``SetOption73 0`` for button decoupling and send multi-press and hold MQTT messages

tasmota/CHANGELOG.md

@@ -1,5 +1,9 @@
 ## Unreleased (development)
 
+### 8.3.0.1 20200514
+
+- Fix default state of ``SetOption73 0`` for button decoupling and send multi-press and hold MQTT messages
+
 ## Released
 
 ### 8.3.0 20200514

tasmota/settings.ino

@@ -1391,6 +1391,7 @@ void SettingsDelta(void)
 #endif  // ESP8266
 
     if (Settings.version < 0x08020004) {
+      Settings.flag3.mqtt_buttons = 0;  // SetOption73 (0) - Decouple button from relay and send just mqtt topic
 #ifdef ESP8266
       Settings.config_version = 0;  // ESP8266 (Has been 0 for long time)
 #endif  // ESP8266

tasmota/support_button_v2.ino

@@ -182,14 +182,14 @@ void ButtonHandler(void)
       else {
         if ((PRESSED == button) && (NOT_PRESSED == Button.last_state[button_index])) {
 
-          if (Settings.flag.button_single) {                   // SetOption13 (0) - Allow only single button press for immediate action, SetOption73 (0) - Decouple button from relay and send just mqtt topic
-            if (!Settings.flag3.mqtt_buttons) {
+          if (Settings.flag.button_single) {           // SetOption13 (0) - Allow only single button press for immediate action,
+            if (!Settings.flag3.mqtt_buttons) {        // SetOption73 (0) - Decouple button from relay and send just mqtt topic
               AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_APPLICATION D_BUTTON "%d " D_IMMEDIATE), button_index +1);
               if (!SendKey(KEY_BUTTON, button_index +1, POWER_TOGGLE)) {  // Execute Toggle command via MQTT if ButtonTopic is set
                 ExecuteCommandPower(button_index +1, POWER_TOGGLE, SRC_BUTTON);  // Execute Toggle command internally
               }
             } else {
-              MqttButtonTopic(button_index +1, 1, 0); // SetOption73 (0) - Decouple button from relay and send just mqtt topic
+              MqttButtonTopic(button_index +1, 1, 0);  // SetOption73 1 - Decouple button from relay and send just mqtt topic
             }
           } else {
             Button.press_counter[button_index] = (Button.window_timer[button_index]) ? Button.press_counter[button_index] +1 : 1;

tasmota/tasmota_version.h

@@ -20,7 +20,7 @@
 #ifndef _TASMOTA_VERSION_H_
 #define _TASMOTA_VERSION_H_
 
-const uint32_t VERSION = 0x08030000;
+const uint32_t VERSION = 0x08030001;
 
 // Lowest compatible version
 const uint32_t VERSION_COMPATIBLE = 0x07010006;