Theo Arends
|
452031fbbd
|
Add Energy Export Active support to BL0906 (Athom EM2/EM6)
|
2024-09-27 18:08:22 +02:00 |
Theo Arends
|
ab2d6c1169
|
Add Energy command ``PowerSet 60,230`` to calibrate both Current and Power with known resistive load of 60W at 230V using calibrated Voltage
|
2024-08-20 13:08:56 +02:00 |
Theo Arends
|
c5b92d3ab1
|
Add Energy Log level 4 message when (Calculated) Apparent Power is less than Active Power indicating wrong calibration (#20653)
|
2024-08-19 22:31:56 +02:00 |
s-hadinger
|
a3ed99e549
|
Change Energy `power_history` arrays to prepare for Berry mapping (#21876)
|
2024-07-31 14:27:34 +02:00 |
Theo Arends
|
9b537d81e0
|
Fix energy maxpower retry count (#21695)
|
2024-07-03 13:52:01 +02:00 |
Theo Arends
|
1fd8de6762
|
Update energy structure
|
2024-07-02 18:47:55 +02:00 |
Theo Arends
|
640aabe1b3
|
Fix ESP32 MaxPowerHold edge case (#21695)
|
2024-07-02 18:07:53 +02:00 |
Theo Arends
|
33062dc839
|
Refactor energy drivers
|
2024-06-30 16:58:37 +02:00 |
Theo Arends
|
8a0493b659
|
Cleanup esp32 energy
|
2024-06-28 18:04:50 +02:00 |
Theo Arends
|
8364eca708
|
Refactor esp32 energy margins entry
|
2024-06-28 17:51:05 +02:00 |
Theo Arends
|
271446fd66
|
Remove obsolete SafePower commands
|
2024-06-28 14:38:08 +02:00 |
Theo Arends
|
96a45a6dde
|
Refactor ESP32 energy
|
2024-06-28 11:12:28 +02:00 |
Theo Arends
|
621f6f59e1
|
Fix default power windows
|
2024-06-27 17:07:08 +02:00 |
Theo Arends
|
178d42c286
|
Change ESP32 support for energy margin checks, like ``MaxPower2`` per phase (#21695)
- Add ESP32 support for power and energy limit checks, like ``MaxEnergy2`` per phase (#21695)
- Bump version v14.1.0.3
|
2024-06-27 16:50:45 +02:00 |
Theo Arends
|
9350f68ac5
|
Replace optional MQTT_TELE_RETAIN to Energy Margins message by ``SensorRetain``
|
2024-06-07 11:48:52 +02:00 |
Theo Arends
|
c41f18a9b6
|
Fix calloc allignment
|
2024-05-05 18:26:21 +02:00 |
Theo Arends
|
9cacf2f609
|
Fix Power off due to overtemp and/ot overload
|
2024-04-08 12:03:11 +02:00 |
SteWers
|
55259aa8c5
|
[Energy] Fix frequency handling (#20626)
* [Energy] Prepare MQTT subscribe
- Prepare energy driver for using MQTT subscribe
- Fix handling of frequency
* MQTT in xnrg
* Revert MQTT
|
2024-02-03 12:37:57 +01:00 |
Theo Arends
|
10885fe60d
|
Refactored rules ``Subscribe`` using LList allowing full message size and enabled by default
|
2024-01-22 16:57:59 +01:00 |
SteWers
|
76a7ab5131
|
[Energy] Decoupled `FREQUENCY` and `Energy->type_dc` (#20549)
|
2024-01-21 11:37:04 +01:00 |
Theo Arends
|
637fac5ae8
|
Add GUI sensor separators (#20495)
|
2024-01-15 15:36:59 +01:00 |
Theo Arends
|
21c7edcb50
|
Add display of active drivers using command ``status 4``
|
2023-12-27 22:03:56 +01:00 |
Theo Arends
|
01e51b2c9d
|
Fix undocumented use of Energy struct
|
2023-11-24 16:49:51 +01:00 |
Theo Arends
|
2cee622af8
|
ESP32 remove restart energy logging if no energy monitoring is selected
|
2023-11-24 16:36:41 +01:00 |
Theo Arends
|
5cee525d02
|
Add Active Power Total
Add Active Power Total if multiple phases AND both positive and negative values (#19141)
|
2023-10-13 13:56:04 +02:00 |
Theo Arends
|
21ac018d70
|
Fix compile error
|
2023-10-06 11:23:58 +02:00 |
SteWers
|
dd8b85282a
|
EnergyMargins - always send MQTT telemetry message (#19397)
|
2023-08-27 10:53:04 +02:00 |
Theo Arends
|
9b6efc674d
|
Fix compilation
|
2023-08-24 15:17:04 +02:00 |
Theo Arends
|
5b6a25a7a0
|
Fix driver config backup and restore
Fix driver config backup and restore (#18295)
|
2023-07-12 10:52:58 +02:00 |
Theo Arends
|
889e6ea54d
|
Fix driver config restore
|
2023-07-11 16:12:04 +02:00 |
Theo Arends
|
85aed3a17d
|
Remove phase_count_virtual
|
2023-07-01 14:31:03 +02:00 |
Theo Arends
|
58e13edea0
|
Change loglevel message
|
2023-06-30 11:31:59 +02:00 |
Theo Arends
|
ca452c5e43
|
Add Energy->phase_count_virtual
|
2023-06-30 11:14:37 +02:00 |
Theo Arends
|
07b7a7ee9a
|
Fix initial ESP32 Energy kWh total time
|
2023-05-29 16:19:55 +02:00 |
Theo Arends
|
86979646ff
|
Energy power delta report delayed
Energy power delta report delayed by two seconds allowing hardware to stabilize (#17751)
|
2023-05-11 18:10:52 +02:00 |
Theo Arends
|
c2a6dd81e8
|
Fix ESP32 energy monitoring set StartTotalTime
Fix ESP32 energy monitoring set StartTotalTime regression from v12.3.1.5 (#18385)
|
2023-04-14 17:42:31 +02:00 |
Theo Arends
|
1e1c536a50
|
Consolidate Energy Column Gui
|
2023-03-25 15:16:06 +01:00 |
Theo Arends
|
115105bf7c
|
Consolidate energy messages
|
2023-03-18 18:26:43 +01:00 |
Theo Arends
|
9a3a479c4f
|
Reduce heap fragmentation
|
2023-03-17 21:17:53 +01:00 |
Theo Arends
|
54a2688cbf
|
Bump v12.4.0.3
- Bump v12.4.0.3
- Refactor energy monitoring reducing stack usage and solve inherent exceptions and watchdogs (#18164)
|
2023-03-17 21:05:51 +01:00 |
Theo Arends
|
bda32739a8
|
Support for reset settings on filesystem
|
2023-03-13 15:41:21 +01:00 |
Theo Arends
|
8a3546e5c4
|
Fix ESP32 energy period
Fix ESP32 energy period shows kWh value instead of Wh regression from v12.3.1.5 (#15856)
|
2023-03-11 17:01:43 +01:00 |
Barbudor
|
0dc39e0470
|
Tariff command variant to force tariff - take 2 (#18112)
* tariff command variant to force tariff
* move to Settings + add esp8266
* added tariff-forced to changelog
|
2023-03-04 21:58:03 +01:00 |
Barbudor
|
6b016eb860
|
tariff command variant to force tariff (#18102)
|
2023-03-03 18:43:26 +01:00 |
Theo Arends
|
5cdd9791f4
|
Fix invalid apparent and reactive power
|
2023-02-28 10:17:30 +01:00 |
Theo Arends
|
4c59b5b8d1
|
Fix Energytotals cannot be set to negative values
Fix Energytotals cannot be set to negative values (#17965)
|
2023-02-17 10:53:07 +01:00 |
Theo Arends
|
ec56473631
|
Refactor XxxSet and XxxCal energy commands
|
2023-02-12 14:05:33 +01:00 |
Theo Arends
|
c699131103
|
Add Shelly Pro 4PM to lvgl binary
|
2023-02-05 16:22:18 +01:00 |
Theo Arends
|
db581b15c7
|
Add SetOption150
Add SetOption150 - (Energy) Force no voltage/frequency common allowing individual voltage channel calibration.
|
2023-01-31 22:30:50 +01:00 |
Theo Arends
|
9e9afe88f1
|
Fix ESP32 energy monitoring over 3 phases
|
2023-01-30 14:16:13 +01:00 |