Commit Graph

5765 Commits

Author SHA1 Message Date
Staars b9e3815358 adding stuff 2020-01-31 10:12:48 +01:00
Staars 3e43c4c551 Merge branch 'development' of https://github.com/arendst/Sonoff-Tasmota into hm10 2020-01-31 07:39:35 +01:00
to-scho c6a2854a6e simultaneous shutter button press per shutter
detect simultaneous press per shutter and not for whole module
2020-01-30 14:33:33 +01:00
Staars 15428f59e9 add some stuff from the mp3-driver 2020-01-30 09:18:21 +01:00
Staars 07df4c1dfb start hm-10-driver 2020-01-30 08:39:28 +01:00
RemiDing 5278a84252 POWER_INCREMENT added 2020-01-28 15:37:18 +01:00
RemiDing deb8398d0b maybe needed 2020-01-28 15:15:49 +01:00
RemiDing 7892bad81b toggle pressed and not_pressed 2020-01-28 15:10:23 +01:00
to-scho 72935bdcc6 Buzzer extensions
Add infinite mode (count==-1), add follow led mode (count==-2), add count>1 for tune playback
2020-01-28 11:22:36 +01:00
Theo Arends 42461aaaf3 Fix command Publish payload handling 2020-01-27 17:38:32 +01:00
Theo Arends bfb7f0c1b9
Merge pull request #7616 from to-scho/hotfix/shutter_target_position
fix shutterposition call w/o arguments after boot
2020-01-27 12:25:13 +01:00
to-scho 11b13f73b0 fix shutterposition call w/o arguments after boot 2020-01-27 11:05:11 +01:00
Theo Arends a2a650102e
Merge pull request #7615 from to-scho/hotfix/shutter_wraparound_endstoptime
fix position wrap around when shutterendstoptime is enabled
2020-01-27 10:38:28 +01:00
to-scho 0d03c1682e fix position wrap around when shutterendstoptime is enabled 2020-01-27 09:46:39 +01:00
Theo Arends df98514c9e
Merge pull request #7614 from s-hadinger/awsiot_shadow
Add ``SetOption84 1`` sends AWS IoT device shadow updates (alternative to retained)
2020-01-27 08:45:22 +01:00
Hadinger fab03d8173 Add ``SetOption84 1`` sends AWS IoT device shadow updates (alternative to retained) 2020-01-26 23:08:52 +01:00
Theo Arends 9efe67127d Refactor wifi code 2020-01-26 15:52:26 +01:00
Theo Arends 3d00c4f093 Change wifi connectivity stability
Change wifi connectivity stability (#7602)
2020-01-26 14:30:11 +01:00
Theo Arends 7ad63b4760
Merge pull request #7602 from wir3z/development
Address multiple WiFI connectivity /stability issues.
2020-01-26 14:21:06 +01:00
Theo Arends ff01f934e2 Bump version 8.1.0.5 2020-01-26 14:20:40 +01:00
Theo Arends 5b0259e7c3 Keep legacy support 2020-01-26 14:16:44 +01:00
Theo Arends 567c40675a
Merge pull request #7605 from jay-wilkinson/patch-1
Update BUILDS.md
2020-01-26 13:37:38 +01:00
jay-wilkinson a935dda9ac
Update BUILDS.md
If you read enough issues you can finally find a vague reference to "Enable ALL protocols" and tasmota-ir but not in the same issue. Wasted a day on this. Looks like many others have too.
2020-01-25 21:15:56 -06:00
CORP\vdi 81c6355b8f Address multiple WiFI connectivity /stability issues.
1) Reduce the roam threshold to 5dBm to fix issues where a device might connect at -80dBM which is marginal operation, but would not roam to a -72dBm AP
2) Reduce the scan rate from 44 minutes to 5 minutes to accelerate network harmony
3) Arduino SDK was allowed to control re-connections which resulted in a de-authentication attack on teh WiFi AP.  Explicitly disable with WiFi.setAutoReconnect(false);
4) Reduce WIFI_CHECK_SEC to 5, and Wifi.retry_init times to accommodate Tasmota dealing with retransmissions.
5) WifiBeginAfterScan:  Save the last BSSID a connection attempt was made on.  Should that error, pick the next strongest AP for the next attempt.  Addresses situations where an AP has a high RSSI, but poor channel health due to it being overloaded.
6) WifiCheckIPAddrStatus: Error cases did not properly alternate between AP's, with some error cases geeting hug up where they did not initiate a reconnection so the device became non-responsive.  Device now starts at Wifi.retry_init, tries to connect, does again at Wifi.retry_init/2, and then does a WifiConfig.  Should no IP address be received, restart DHCP each second during this time.

Test Environment:
27 Tasmota devices
3 SonicWALL corporate AP's
Highly interfered 801.11n network
2020-01-25 11:22:40 -07:00
Theo Arends 022a6a05ab
Merge pull request #7601 from s-hadinger/zigbee_zb
Change Zigbee commands renamed to ``Zb*``
2020-01-25 18:53:24 +01:00
Hadinger e34cc3cbcc Change Zigbee commands renamed to ``Zb*`` 2020-01-25 17:42:53 +01:00
Theo Arends 53e93215df Fix trigger SYSTEM#BOOT
Fix trigger SYSTEM#BOOT when mdns is disabled an no mqqthost is set (#7552)
2020-01-25 13:45:26 +01:00
Theo Arends febabec3bb Fix Gui ADC Range unit 2020-01-25 12:17:35 +01:00
RemiDing cfbd1cb85d optimized 2020-01-25 11:22:28 +01:00
Theo Arends 473299ffcd Refactor rules JSON decoding
Refactor rules JSON decoding allowing up to 10 subtypes deep
2020-01-24 17:13:39 +01:00
Theo Arends ddd1f4c379 Return state information when wakeup is complete
Return state information when wakeup is complete (#7583)
2020-01-24 12:48:50 +01:00
Theo Arends a4e2b28b86
Merge pull request #7587 from BASM/development
ds1624/ds1621: Stabilization and bug fixes
2020-01-24 11:18:54 +01:00
Theo Arends a55b6fd81b
Merge pull request #7589 from effelle/development
ADC Range (replaces adc Moisture)
2020-01-24 11:17:28 +01:00
Federico Leoni 26755202c7
New ADC Range 2020-01-23 19:21:49 -03:00
Federico Leoni 6757d9731a
new ADC Range definition 2020-01-23 19:17:15 -03:00
Theo Arends 7723f7f707
Merge pull request #7588 from s-hadinger/zigbee_aqara_cube_rotate
Add Zigbee support for Aqara Cube rotate
2020-01-23 22:05:46 +01:00
Hadinger 60f5492765 Add Zigbee support for Aqara Cube rotate 2020-01-23 21:55:10 +01:00
Leonid Muravjev b977c28435 ds1624/ds1621: Stabilization and bug fixes
* ds1621 datasheet is wrong for higher resolution, fixed
* ds1621 sometimes reset on bad (long) i2c bus, added autoreconfigure
* hotplug bug fixes
2020-01-23 23:45:24 +03:00
Theo Arends 3b71173a09 Add precision to Moisture sensor
Add precision to Moisture sensor (#7402)
2020-01-23 18:13:32 +01:00
saper-2 e26999f300 Updated lang files with new defines + comments 2020-01-23 17:18:44 +01:00
saper-2 ad083d1675 Some code cleanup and add comments & info 2020-01-23 16:13:25 +01:00
Theo Arends 9afbf854cf Add rule trigger on one level deeper
Add rule trigger on one level deeper using syntax with two ``#`` like ``on zigbeereceived#vibration_sensor#aqaracubeside=0 do ...``
2020-01-23 13:03:05 +01:00
Theo Arends ac486f2186 Document my_image 2020-01-23 10:57:29 +01:00
Theo Arends 92a5d978de
Merge pull request #7581 from patrickdk77/development
make kCodeImage/my_image more customizable
2020-01-23 10:34:04 +01:00
Theo Arends 405da3ee3f
Update tasmota.ino
Keep hackbox commit insert possibility
2020-01-23 10:33:08 +01:00
Theo Arends 85cff52822
Merge pull request #7580 from s-hadinger/zigbee_27
Minor Zigbee improvements
2020-01-22 22:49:28 +01:00
Patrick Domack 2e89370f1e Add ability to define more subversions in user overrides and remove ram/flash usage to store all versions. 2020-01-22 16:49:28 -05:00
Hadinger b2c0a34979 Minor Zigbee improvements 2020-01-22 22:40:28 +01:00
Theo Arends 4a44b9fc5f
Merge pull request #7579 from s-hadinger/fix_rgbwwtable
Fix ``RGBWWTable`` ignored (#7572)
2020-01-22 22:05:02 +01:00
Hadinger 514f3e7357 Fix ``RGBWWTable`` ignored (#7572) 2020-01-22 21:37:23 +01:00