421c95a51b
Update change logs
2023-07-22 14:55:20 +02:00
b149443691
Fix default battery level
...
- Fix default battery level (#19160 )
- Bump version to v13.0.0.3
2023-07-21 14:35:22 +02:00
d1a4296867
New DEEPSLEEP topic for HA + Battery Level % support ( #19134 )
...
* New LWT on deepsleep
To allow better integration into HA LWT topic will report details of sleep status:
16:54:04.388 MQT: hm/tele/ESP_3284D1/LWT =
{"Sleep":{"Time":"2023-07-17T16:55:03","Sleep":1689612844,"Wakeup":1689612903}}
* Revert LWT back to non JSON
Send DeelSleep on LWT
Send Deepsleep parameters on topic DeepSleep
* Setting default for batteryLevel
* Enable BatteryPercentSet
Changing the battery level e.g. by rule
* Added Battery % to status message
* added battery_level_percent
* Added battery % support in STATE message
* Enable setting battery level
101 is reserved for power-plug. No battery Level reported
* Setting default for battery Level
101 is reserved for power plug
0..100 normal battery values
* Revert back LWT to Offline
Removed "DeepSleep" LWT status until further decision is made. Current implementation is technical sufficient for HA to detect a battery powered device
* Added discovery message after deepsleep change
* Added discovery for battery and deepsleep
2023-07-20 09:51:08 +02:00
2a3690b866
Berry `tasmota.loglevel()` and `tasmota.rtc_utc()` for faster performance ( #19152 )
2023-07-19 20:58:50 +02:00
6382c2806c
More user-friendly defaults for DisplayMode and DisplayDimmer ( #19138 )
...
Changing default for DisplayMode from 1 to 0. Users are getting confused by the display doing something they did not ask for (and not being aware of DisplayMode). This got worse with LVGL/HASPmota displays becoming common, with users having much less reason to dive into the old DisplayXxxxx commands. And it may even be hard to see that it is even a display of time/date causing the display to flicker.
Changing default for DisplayDimmer from 10% to 50%. The low brightness of 10% is not always easy to see, especially in daylight. 50% is generally better, while not going "full blast" with 100%.
2023-07-18 08:26:51 +02:00
9638beacec
Fix possible buffer overflow
2023-07-12 12:45:02 +02:00
5b6a25a7a0
Fix driver config backup and restore
...
Fix driver config backup and restore (#18295 )
2023-07-12 10:52:58 +02:00
889e6ea54d
Fix driver config restore
2023-07-11 16:12:04 +02:00
43bc81010f
Configuration file save and restore .xdrvsetXXX
...
Configuration file save and restore now backup and restore ``.xdrvsetXXX`` files too (#18295 )
2023-07-10 16:03:32 +02:00
522e6cf234
Implement deepsleep(0)
...
Implement deepsleep(0) as command ``restart 9`` (#19024 )
2023-07-03 21:07:45 +02:00
3edb5bb096
Move SD card init up
...
Move SD card init up (#18934 )
2023-07-01 12:48:33 +02:00
eb655a4a8f
Add support for SGP41 TVOC/NOx Sensor ( #18880 )
...
* Initial support for SGP41
* Removing delay() use from SGP4x driver
* Using i18n for TVOC/NOx raw values as well
2023-06-29 09:04:08 +02:00
504b51a9b4
Add command ``Delay -1``
...
Add command ``Delay -1`` to wait until next second (#18984 )
2023-06-28 11:53:23 +02:00
69b2b93d61
Matter UI and logs polishing ( #18866 )
2023-06-12 19:45:18 +02:00
07b7a7ee9a
Fix initial ESP32 Energy kWh total time
2023-05-29 16:19:55 +02:00
e05d75248e
Add undocumented feature
2023-05-25 17:13:31 +02:00
d0e88c9dae
Fix BusyDelay WS2812
2023-05-24 17:24:48 +02:00
fc67cca8b4
Add generic SystemWaitIfBusy() to fix WS2812 led flicker
...
Add generic SystemWaitIfBusy() to fix WS2812 led flicker
2023-05-24 16:21:59 +02:00
ae518424bc
Add IPv4 DNS lookup to influxdb
...
- Add IPv4 DNS lookup to influxdb (#18015 )
- Add response to influxdb send
2023-05-21 15:34:36 +02:00
f5d6578fb5
Fix correct JSON display of WifiPower float
2023-05-19 17:41:18 +02:00
77103baa0a
Add internal support for max log level
2023-05-19 15:20:21 +02:00
043ea2986b
Berry `tasmota.wifi()` would wrongly report wifi as up ( #18687 )
...
* Berry `tasmota.wifi()` would wrongly report wifi as up
* Fix ESP8266 compile
* Fix display of IP in wifiman
* Improve wifiman IP handling for IPv6
2023-05-18 11:23:09 +02:00
4a7e4f9a17
Refactor dynamic wifi tx power
2023-05-17 11:44:14 +02:00
57f85ae478
Optimize dynamic WiFi power
2023-05-17 10:45:00 +02:00
0385204ca7
Add command ``WifiPower 0``
...
Add command ``WifiPower 0`` to enable dynamic wifi power based on RSSI by @TD-er (#15443 )
2023-05-16 18:55:55 +02:00
9b8f3b6b4c
Add command I2CScan0
...
Add command I2CScan0 to scan both busses if available
2023-05-14 15:21:19 +02:00
f1a9a0b45b
Add support for PCA9557
...
Add support for PCA9557 8-bit I/O expander (#18632 )
2023-05-14 15:08:09 +02:00
7cad4f95b6
Enable I2c on webcam
2023-05-14 14:42:11 +02:00
3c951d7751
fix GT911 crash in LVGL firmware ( #18633 )
...
* fix GT911 crash
* remove wrong frag when using GT911
2023-05-10 14:02:51 +02:00
e9d1e8c725
Change command FileUpload binary index
2023-05-06 18:09:11 +02:00
cda2bf157d
Add support for TC74
...
Add support for TC74 temperature sensor by Michael Loftis (#18042 )
2023-05-01 16:26:07 +02:00
53bd49ddcd
Remove USE_ARDUINO_OTA from ESP32
2023-04-27 16:35:47 +02:00
c33472d9b6
ArduinoOTA support only ESP8266 ( #18528 )
...
* ArduinoOTA support only ESP8266
* add comment ArduinoOTA
2023-04-27 14:19:27 +02:00
9f77cfd890
Fix single pin latching relay power on state
...
Fix single pin latching relay power on state (#18386 )
2023-04-19 16:17:04 +02:00
6f6c43a724
Add command ``SetOption152 0/1``
...
Add command ``SetOption152 0/1`` to select two (default) or one pin bistable relay control (#18386 )
2023-04-18 17:16:29 +02:00
c2a6dd81e8
Fix ESP32 energy monitoring set StartTotalTime
...
Fix ESP32 energy monitoring set StartTotalTime regression from v12.3.1.5 (#18385 )
2023-04-14 17:42:31 +02:00
4fdd1ad94d
Ftlab gdk101 Gamma Radiation Sensor Module support ( #18390 )
...
* Support for GDK101.
* GDK101 driver rework
---------
Co-authored-by: PetrNovacek <39201428+r21m@users.noreply.github.com>
2023-04-14 15:29:00 +02:00
545c6a3511
Refactor saving some bytes
2023-04-07 13:03:20 +02:00
4f983105f3
Allow compound commands in json command
...
Allow compound commands in json command (#18358 )
2023-04-07 12:36:02 +02:00
d8bdcebc78
xsns_105_lox_o2: LOX-02 Oxygen sensor support ( #18333 )
...
* xsns_105_lox_o2: LOX-02 Oxygen sensor support
* strtof removed, ConvertTemp added
2023-04-06 09:52:15 +02:00
542eca3154
Global fix http(s) connect issues
2023-04-03 16:12:29 +02:00
d9353cf1e3
Fix upload connection error
2023-04-03 14:17:08 +02:00
5c14a3169b
Shutter esp32 support up to 16 shutters ( #18295 )
...
* Updates to support ESP32 shutter compiler option
* New ESP32 shutter driver
* Update xdrv_27_ESP32_shutter.ino
* Update xdrv_27_shutter.ino
* Update support_command.ino
* Update xdrv_27_shutter.ino
Fix compile error
* Update xdrv_27_ESP32_shutter.ino
Fix compile error
* Update xdrv_27_shutter.ino
Fix compile error
---------
Co-authored-by: Theo Arends <11044339+arendst@users.noreply.github.com>
2023-03-29 15:43:19 +02:00
61b8e95543
Fix ESP32 change baudrate ( #17869 )
2023-03-26 16:37:29 +02:00
9ae7b86efc
Save some bytes
2023-03-25 11:59:42 +01:00
b32a093c0c
Fix multidigit SwitchModes display
...
Fix multidigit SwitchModes display
2023-03-25 11:36:10 +01:00
5bb624ad09
Add command ``SwitchMode0``
...
Add command ``SwitchMode0`` to show or set all SwitchModes
2023-03-25 11:29:49 +01:00
00c60450c6
Consolidate messages
...
- Consolidate messages
- Fix sen5x
2023-03-22 13:25:55 +01:00
5661a6798f
Support for pmsa003i ( #18214 )
...
* Initial support for PMSA003I air quality sensor.
* Updated pmsa003i support to the latest dev branch
* Fixed typo in esp32 configuration
Removed all global variable and use the PM25_AQI_Data struct from Adafruit library
Fix typo Xsns100 to Xsns104
Fix Typo XI2C_71 to XI2C_78
* Move everything in custom Struct for PMSA003I driver
---------
Co-authored-by: Jean-Pierre Deschamps <info@jpdeschamps.com>
2023-03-20 09:52:22 +01:00
bda32739a8
Support for reset settings on filesystem
2023-03-13 15:41:21 +01:00
2b89b7a134
Fix init order of device drivers ( #18124 )
2023-03-11 15:52:02 +01:00
63408f3a7d
Add NTP time request from gateway ( #17984 )
2023-03-01 10:58:02 +01:00
9f30836854
Add support for multiple MCP23017 as switch/button/relay
2023-03-01 10:12:47 +01:00
635afa36de
i2cdriverstate in status only when use_i2c ( #18067 )
2023-02-27 15:39:52 +01:00
a97f0349d8
Add I2CDriver output to status 4
2023-02-27 09:28:28 +01:00
e927e3307e
Add DevicesPresent limit check
...
- Increase supported relays and buttons to 32
2023-02-25 16:44:04 +01:00
29ae903f67
Fixed EnergyTotal divided twice
...
Fixed EnergyTotal divided twice during minimal upgrade step regression from v12.3.1.3 (#18024 )
2023-02-24 16:15:02 +01:00
a994c71de4
Refactor device_present calculation
2023-02-19 15:28:20 +01:00
89ccfe910e
Fix undocumented support
...
Fix undocumented support for non-sequential buttons and switches (#17967 )
2023-02-18 14:30:40 +01:00
31f5b79bf8
Fix adding virtual switches
2023-02-15 11:06:53 +01:00
87686c0d52
update changelogs
2023-02-13 16:07:38 +01:00
b72cf69d2c
Refactor buttons and switches Pt.3
...
- Quick return from interrupts
2023-02-12 17:40:24 +01:00
dab80f9d29
Refactor buttons and switches Pt.2
2023-02-12 17:23:22 +01:00
e0584b2157
Refactor switches and buttons
...
- Fix Tuya switches
2023-02-12 16:09:28 +01:00
134c839244
Fix virtual relays multi press
2023-02-09 15:34:05 +01:00
8cbb62d8c9
Simplify virtual buttons/switches
2023-02-09 14:46:54 +01:00
055331d2ab
Breaking change TM1638 button and led support
...
Breaking change TM1638 button and led support are handled as virtual switches and relays (#11031 )
2023-02-06 15:57:27 +01:00
ce29bc38d7
Extent ESP8266 virtual button support
2023-02-06 12:03:32 +01:00
9673cca8b0
Extent ESP8266 virtual switch support
2023-02-06 11:45:28 +01:00
0ebcf1dc03
Fix exception on empty topic ( #17879 )
2023-02-05 15:13:44 +01:00
8bc03bbc06
Bump version v12.3.1.6
...
- Add ESP32 preliminary support for Matter protocol, milestone 1 (commissioning) by Stephan Hadinger
- Add basic support for Shelly Pro 4PM
2023-02-05 14:29:42 +01:00
96b66225d2
Reserve `SetOption151` for Matter protocol ( #17860 )
2023-02-02 20:22:59 +01:00
3d39efaf4a
isTuya optionnal arg to validpin ( #17835 )
2023-01-30 22:35:38 +01:00
d9cbbaeb2a
Fix energy usage and return migrated too small
...
Fix energy usage and return migrated too small (/10000) regression from v12.3.1.3
2023-01-30 15:36:46 +01:00
664b60332a
Fix broken I2C priority
...
Fix broken I2C priority regression from v12.3.1.3 (#17810 )
2023-01-29 13:59:09 +01:00
2ed602057c
Add SEN5X to I2C devices ( #17736 )
2023-01-29 08:06:25 +01:00
d70dbe979e
Prep ESP32 energy for four+ phases
2023-01-26 15:26:10 +01:00
4297fa3f3e
Add Shelly Pro 4 input interrupt support
2023-01-23 12:51:02 +01:00
88dd5f7f50
Fix Shelly Pro 4PM auto reset
2023-01-22 16:41:25 +01:00
c85003c67d
Prep Shelly Pro 4PM
2023-01-21 14:30:35 +01:00
aa78ffb733
Prep Shelly Pro 4PM
2023-01-20 14:28:58 +01:00
d904e0aa7f
Tuya - WIFI_STRENGTH + Save check on MCU_CONF ( #17724 )
...
* adding response to command 36 Get Wifi Strength
* more logs
* poperly check and warn if Mode 2 provide bad GPIOs
* final test on gpio
2023-01-17 04:46:00 +01:00
e2c9a71c3b
Prep virtual button handler
2023-01-16 18:29:51 +01:00
7a97fa4a19
Fix BMP support on two busses
...
Fix BMP support on two busses (#17643 )
2023-01-15 17:14:54 +01:00
094f45fe7e
Fix compilation without USE_IPV6
2023-01-13 11:47:58 +01:00
1a9e86a6b3
Fix ESP32 safeboot propagating upload
2023-01-13 11:30:30 +01:00
24105a74b2
Save some RAM on ESP8266
2023-01-08 17:51:17 +01:00
17d68750d9
WIP Tuya MCU Bridge driver alternative to the TuyaMCU driver ( #17626 )
...
* WIP Tuya MCU Bridge driver alternative to the TuyaMCU driver
The main difference is this driver does not try and wire MCU data points
(Dps) into the tasmota power/light/etc controls. Instead each Dp ends up
being relayed directly to MQTT and the rules subsystem. If you want to
change the state of something wired up to the MCU, you send tuyamcu
specific commands to manipulate the Dp.
Each Dp gets a type and id specific topic that is sent to MQTT. eg, Dp
id 1 type bool looks like tele/%topic%/TUYAMCUBOOL1. To change state you
send a TuyaMCUBool1 command (ie, the command index value is used as the
DpId, which is nice and symmetrical) with the new value.
Currently Rules operate on TuyaMCU#TypeDpid things, eg, "rule1 on
TuyaMCU#Bool1 do power %value% endon" toggle the power on the tasmota
device when the state of the thing on the MCU changes too.
The most obviously missing stuff at the moment is:
- better relaying of the wifi/mqtt status to the MCU
- handling wifi reset requests from the MCU
- low power stuff?
- support for sending status updates and device info queries.
- restarting the tuya mcu state machine?
- restarting the rx state machine when no bytes are rxed for a period of
time
- time sync
* shorten the log prefix to TYB (3 chars).
requested by arendst
* use the local definition for the SET_DP command.
reaching back to the existing tuyamcu code isnt reliable.
pointed out by arendst
* put the todo list in the code so it can be tracked
* check the wifi/mqtt state every second and update the mcu if it changes.
* fix rule processing when Dp state is changed from a cmnd.
rule processing was done as part of publishing the state, but publishing
the state when it was updated by a command only happened if So59 was
set. split rule processing out of publish and call them separately as
needed.
publish is now called from teleperiod, status updates from the MCU,
and from cmnds if so59 is set. rules are called from status updates from
the MCU and from cmnds.
Co-authored-by: David Gwynne <dlg@defeat.lan.animata.net>
2023-01-08 17:35:45 +01:00
9073fe01c1
Add ESP32 support for BMPxxx sensors on two I2C busses
...
Add ESP32 support for BMPxxx sensors on two I2C busses (#17643 )
2023-01-08 17:19:08 +01:00
0781192c87
Extract I2C support
...
- Fix BMP compilation on ESP8266
2023-01-08 16:04:58 +01:00
d80b763f97
Enable more than two and up to four BMP/BME sensors on two I2C buses for ESP32 (only two addresses (76, 77) per I2C bus are possible). (enhancement of #10827,#1049, #2707 ) ( #17643 )
2023-01-08 15:57:34 +01:00
95690ab1b9
Add recursive rule MQTT subscribe support ( #16943 )
2023-01-07 17:31:10 +01:00
2e7496a052
Keep webserver enabled on command ``upload``
2023-01-07 15:37:52 +01:00
5e89578403
Extend fix #17619 to non-IPv6 ( #17621 )
2023-01-06 19:03:07 +01:00
33d6dbed3d
No IP address shown when in AP moode ( #17599 ) ( #17619 )
2023-01-06 14:03:16 +01:00
dfc01cd3a4
Fix crash when getting IP address ( #17576 )
2023-01-03 09:33:31 +01:00
14ee8decf7
Update changelogs
...
Add support for PCA9632 4-channel 8-bit PWM driver as light driver by Pascal Heinrich (#17557 )
2023-01-01 14:29:41 +01:00
32a51da43d
Fix PUSH_IGNORE_INV once more
2023-01-01 14:01:18 +01:00
c63919d783
Change Energy totals max supported value
...
- Change Energy totals max supported value from +/-21474.83647 to +/-2147483.647 kWh
- Bump version to v12.3.1.3
2023-01-01 11:32:30 +01:00
e5fd35ba85
Added: Driver xdsp_20_tm1650 for I2C-based seven-segment LED controller TM1650. ( #17549 )
...
Co-authored-by: Stefan Oskamp <stefan@scinax.lan>
2022-12-31 09:19:53 +01:00
Theo Arends
stefanbode
s-hadinger
sfromis
Andrew Klaus
Jason2866
Szewcson
Anton ACE
Jean-Pierre Deschamps
Barbudor
Tyeth Gundry
David Gwynne
Ralph Maschotta
Stefan Oskamp