Theo Arends
f0bd418129
Dark logo
2023-01-24 10:19:46 +01:00
Theo Arends
82b6d1ee91
Bump version to v12.3.1.4
2023-01-15 17:45:59 +01:00
Theo Arends
f1763d34cf
Update changelogs
2023-01-11 10:31:39 +01:00
Theo Arends
9073fe01c1
Add ESP32 support for BMPxxx sensors on two I2C busses
...
Add ESP32 support for BMPxxx sensors on two I2C busses (#17643 )
2023-01-08 17:19:08 +01:00
Theo Arends
2e7496a052
Keep webserver enabled on command ``upload``
2023-01-07 15:37:52 +01:00
Theo Arends
8275cb776e
Fix rule mqtt subscribe payload size
...
Increase rule event buffer from 100 to 256 characters (#16943 )
2023-01-05 15:02:55 +01:00
Theo Arends
ea6a5a2d4e
Removed delays in TasmotaSerial and TasmotaModbus Tx enable switching
2023-01-02 15:08:40 +01:00
Theo Arends
e375448090
Update change logs
2023-01-02 12:31:46 +01:00
Theo Arends
14ee8decf7
Update changelogs
...
Add support for PCA9632 4-channel 8-bit PWM driver as light driver by Pascal Heinrich (#17557 )
2023-01-01 14:29:41 +01:00
Theo Arends
c63919d783
Change Energy totals max supported value
...
- Change Energy totals max supported value from +/-21474.83647 to +/-2147483.647 kWh
- Bump version to v12.3.1.3
2023-01-01 11:32:30 +01:00
Theo Arends
20a50ffc2e
Revert Tuya rewrite
...
- Update changelogs
2022-12-31 16:08:59 +01:00
Theo Arends
4ee6aee35e
Fix ESP8266 relay power on spikes
...
Fix ESP8266 set GPIO's to input on power on fixing relay spikes (#17531 )
2022-12-29 14:46:34 +01:00
Theo Arends
2e1f8fd756
Update changelogs
...
Change ESP32 Framework (Core) from v2.0.5.4 to v2.0.6 (IPv6 support)
2022-12-28 14:31:49 +01:00
Theo Arends
2fd63ff01f
Fix Modbus transmit enable GPIO
...
Fix Modbus transmit enable GPIO enabled once during write buffer
2022-12-28 14:07:30 +01:00
Theo Arends
234d6e20e0
Extent Generic Energy Modbus Driver
...
- Add support for up to 3 single phase modbus energy monitoring device using generic Energy Modbus driver
2022-12-23 16:56:18 +01:00
Theo Arends
23e0bc27e7
Update changelogs
2022-12-22 17:54:54 +01:00
Theo Arends
8ffff8b857
Change Tasmota OTA scripts
...
Change Tasmota OTA scripts now support both unzipped and gzipped file uploads (#17378 )
2022-12-21 17:22:54 +01:00
Theo Arends
3555d88bee
Bump version v12.3.1.2
...
- Fix shutter default motorstop set to 0 (#17403 )
2022-12-21 15:20:33 +01:00
Theo Arends
b33d2d540f
Update changelogs
2022-12-18 14:18:14 +01:00
Theo Arends
a6602249a3
Update changelogs
2022-12-18 14:05:31 +01:00
Theo Arends
4e5c1f7a2d
Bump version to v12.3.1.1
2022-12-16 10:20:51 +01:00
Theo Arends
571502114c
Bump version v12.3.0.1
2022-12-14 14:46:08 +01:00
Theo Arends
1ad8b7713e
Add support for ME007-ULS
...
Add support for ME007-ULS narrow FoV ultrasonic distance sensor by Mathias Buder (#17376 )
2022-12-14 12:18:49 +01:00
Theo Arends
f6d385250e
Update changelogs
2022-12-14 11:31:25 +01:00
Theo Arends
ce4197459f
Update changelogs
2022-12-14 11:25:12 +01:00
Theo Arends
630987302a
Fix Analog MQ exception
...
Fix Analog MQ exception (#17271 )
2022-12-12 10:57:21 +01:00
Theo Arends
d8d45078fb
Update changelogs
2022-12-11 12:23:01 +01:00
Theo Arends
e018b61a9d
Update changelogs
2022-12-10 17:16:42 +01:00
Theo Arends
e1221b924d
Changed removed leading spaces on commands ``(S)SerialSend1 to 6``
...
Removed leading spaces on commands ``(S)SerialSend1 to 6`` but keep on duplicate commands ``(S)SerialSend11 to 16`` (#16723 )
2022-12-04 15:09:39 +01:00
Theo Arends
bbde894628
Add serial Modbus transmit enable GPIOs
...
Add serial Modbus transmit enable GPIOs to all modbus energy drivers and modbus bridge (#17247 )
2022-12-03 12:33:42 +01:00
Theo Arends
af9f83e7e4
Bump version v12.2.0.6
2022-11-29 11:11:39 +01:00
Theo Arends
53563d44d8
Add support for HLK-LD2410 24GHz smart wave motion sensor
...
Add support for HLK-LD2410 24GHz smart wave motion sensor
2022-11-26 17:49:25 +01:00
Theo Arends
a381da3a39
Revert GUI file accept
2022-11-24 14:47:26 +01:00
Theo Arends
6e9394984d
Update changelogs
2022-11-20 15:52:40 +01:00
Theo Arends
f9138984bf
Add accept filename extensions to GUI
...
Add accept filename extensions to GUI file upload input fields (#16875 )
2022-11-20 15:07:38 +01:00
Theo Arends
4f31e7a1b2
Add command ``SetOption35 0..255``
...
Add command ``SetOption35 0..255`` to skip number of received messages in Serial Bridge (default 0) (#17140 )
2022-11-20 12:52:24 +01:00
Theo Arends
783631903d
Add user control over Serial Bridge buffers
...
- Add optional define ``SERIAL_BRIDGE_BUFFER_SIZE`` to set Serial Bridge internal buffer size (Default ESP8266 = 256, ESP32 = 800)
- Add command ``SSerialBuffer 256..SERIAL_BRIDGE_BUFFER_SIZE`` to change serial bridge rx buffer size (#17120 )
2022-11-18 16:21:54 +01:00
Theo Arends
0674f9b0b6
Add command ``SSerialBuffer 64..256``
...
Add command ``SSerialBuffer 64..256`` to change software serial bridge receive buffer size from default (64) to max local buffer size (256) (#17120 )
2022-11-18 13:00:59 +01:00
Theo Arends
e578171a16
Update changelogs
2022-11-17 12:47:09 +01:00
Theo Arends
a924e41ff3
Bump version v12.2.0.5
...
- Fixed ModbusBridge baudrates over 76500 baud (#17106 )
- Bump version v12.2.0.5
2022-11-17 11:44:51 +01:00
Theo Arends
99378308f7
Update changelogs
2022-11-16 14:26:49 +01:00
Theo Arends
229c2cce06
Revert Art-Net to ArtNet
2022-11-16 10:55:56 +01:00
Theo Arends
5f3d504c30
Add support for HMC5883L
...
Add support for HMC5883L 3-Axis Digital Compass sensor by Andreas Achtzehn (#17069 )
2022-11-15 11:11:32 +01:00
Theo Arends
e88d1682e9
Add command ``SwitchMode 16``
...
Add command ``SwitchMode 16`` sending only MQTT message on inverted switch change (#17028 )
2022-11-15 10:10:29 +01:00
Theo Arends
c92d51f050
Rename ArtNet to Art-Net
2022-11-14 14:20:41 +01:00
Theo Arends
bfbdd49aaf
Revert change 2.7.4.9
2022-11-14 12:52:25 +01:00
Theo Arends
60ff102807
Update changelogs
2022-11-14 12:04:36 +01:00
Theo Arends
13c27194ec
TuyaMcu rewrite by btsimonh ( #17051 )
2022-11-13 12:55:18 +01:00
Theo Arends
e83882b655
Update changelogs
2022-11-10 13:54:05 +01:00
Jason2866
1146955312
Core 2.0.5.3
2022-11-10 12:52:38 +01:00
Theo Arends
dd1586fbfc
Bump version to v12.2.0.4
...
- Reverted Flash Mode back from ``DIO`` to ``DOUT`` for ESP8266/ESP8285 (#17019 )
2022-11-09 12:19:33 +01:00
Theo Arends
381bfbf5bd
Redesign distance sensors VL53LXX, TOF10120, HRXL and DYP
...
Redesign distance sensors VL53LXX, TOF10120, HRXL and DYP to use cm instead of mm (#17021 )
2022-11-08 16:59:46 +01:00
Theo Arends
05b43fb143
Redesign distance sensors HRXL and DYP
...
Redesign distance sensors HRXL and DYP to use cm instead of mm (#17021 )
2022-11-08 15:27:40 +01:00
Theo Arends
a469b35f02
Bump version to v12.2.0.3
2022-11-07 11:06:17 +01:00
Theo Arends
4e9cfc7629
Add command ``SetOption47 1..255``
...
Add command ``SetOption47 1..255`` to delay power on relay state in seconds reducing power surge
2022-11-03 17:26:54 +01:00
Theo Arends
0632377192
Fix serial initialization
...
Fix serial initialization for baudrate and config (#16970 )
2022-11-02 11:24:24 +01:00
Theo Arends
79536d8714
Update changelog
2022-10-31 10:59:49 +01:00
Theo Arends
7167eb2f46
Changed ADE7953 monitoring
...
Changed ADE7953 monitoring from instant power to accumulated energy (#16941 )
2022-10-30 12:20:56 +01:00
Theo Arends
41b65fd6b7
Add support for two phase power calibration
...
Add support for two phase power calibration using commands ``PowerSet2``, ``VoltageSet2`` and ``CurrentSet2``
2022-10-30 11:15:17 +01:00
Theo Arends
7fac661b2e
Update changelogs
2022-10-29 16:00:47 +02:00
Theo Arends
cef18060a0
Bump version to v12.2.0.2
...
Prepare for extended calibration and move some persistent data (PowerLow)
2022-10-26 17:59:43 +02:00
Theo Arends
c5f7195d77
Add support for Shelly Pro 1/1PM and 2/2PM ( #16773 )
2022-10-26 17:16:36 +02:00
Theo Arends
b4269d262c
Add support for Shelly Pro 1/2
...
Add support for Shelly Pro 1/2 (#16773 )
2022-10-24 11:32:10 +02:00
Theo Arends
753f4bee31
Change compiling with reduced boards manifests
...
Change compiling with reduced boards manifests in favour of Autoconfig (#16848 )
2022-10-19 10:21:31 +02:00
Theo Arends
2104256b74
Add DS18x20 support on up to four GPIOs
...
Add DS18x20 support on up to four GPIOs by md5sum-as (#16833 )
2022-10-18 16:36:45 +02:00
Theo Arends
7b6f724685
Update changelogs
2022-10-18 15:34:07 +02:00
Theo Arends
065396ff73
Bump version v12.2.0.1
2022-10-17 11:25:22 +02:00
Theo Arends
d4559fea5a
Prep release v12.2
2022-10-17 10:34:48 +02:00
Theo Arends
480fae6804
Add command ``SspmPowerOnState<relay> 0|1|2``
...
Add command ``SspmPowerOnState<relay> 0|1|2`` to set Sonoff SPM 4Relay module v1.2.0 power on state overruling tasmota global power on state. 0 = Off, 1 = On, 2 = Saved state (#13447 )
2022-10-16 12:57:17 +02:00
Theo Arends
2ad018816b
Add command ``WcClock 10..200``
...
Add command ``WcClock 10..200`` set webcam clock in MHz. Default is 20
2022-10-13 17:58:16 +02:00
Theo Arends
6202211c31
Fix Shelly EM polarity ( #16486 )
2022-10-12 15:46:33 +02:00
Theo Arends
5cfbbd4302
Add command ``Sunrise 0..3`` to select sunrise dawn angle
...
- Bump version to v12.1.1.5
- Add command ``Sunrise 0..3`` to select sunrise dawn angle between Normal, Civil, Nautical or Astronomical (#16795 )
2022-10-12 11:02:54 +02:00
Theo Arends
3427e1bee3
Support for Modbus Energy Monitoring devices
...
Support for Modbus Energy Monitoring devices using a rule file. See ``xnrg_29_modbus.ino`` for more information
2022-10-08 16:14:11 +02:00
Theo Arends
da623701d7
Add support for QMC5883L magnetic induction sensor
...
Add support for QMC5883L magnetic induction sensor by Helge Scheunemann (#16714 )
2022-10-05 15:00:03 +02:00
Theo Arends
8eb7b007d5
Support for Shelly Plus 2PM
...
- Version bump to v12.1.1.4
- Support for Shelly Plus 2PM using template ``{"NAME":"Shelly Plus 2PM PCB v0.1.9","GPIO":[320,0,0,0,32,192,0,0,225,224,0,0,0,0,193,0,0,0,0,0,0,608,640,3457,0,0,0,0,0,9472,0,4736,0,0,0,0],"FLAG":0,"BASE":1,"CMND":"AdcParam1 2,10000,10000,3350"}``
2022-10-03 18:02:50 +02:00
Theo Arends
f668ea44ed
Add ESP32-S2 and ESP32-S3 touch input support
2022-09-27 15:36:35 +02:00
Theo Arends
3a4a82ba0a
Fix ESP32 touch button multi-press and hold detection
...
Fix ESP32 touch button multi-press and hold detection (#16596 )
2022-09-27 14:31:21 +02:00
Theo Arends
6bfb9d6aa4
Update changelogs
2022-09-24 16:53:11 +02:00
Theo Arends
971b06ccdd
Add command ``SetOption46 0..255``
...
Add command ``SetOption46 0..255`` to add 0..255 * 10 milliseconds power on delay before initializing I/O (#15438 )
2022-09-15 17:17:16 +02:00
Theo Arends
6aece15bd6
ESP32 Increase number of button GPIOs from 8 to 28
...
ESP32 Increase number of button GPIOs from 8 to 28 (#16518 )
2022-09-14 16:33:01 +02:00
Theo Arends
8b5a34b014
Add support of optional file calib.dat
...
Add support of optional file calib.dat on ADE7953 based energy monitors like Shelly EM (#16486 )
2022-09-13 15:35:09 +02:00
Theo Arends
ae1d4ef1f7
Bump version to v12.1.1.2
2022-09-10 16:32:57 +02:00
Theo Arends
04160106c2
Add commands DspLine and DspSpeed
...
Add commands DspLine and DspSpeed (#15856 )
2022-09-08 16:02:49 +02:00
Theo Arends
86e45969bd
Support for DFRobot SEN0390 V30B ambient light sensor
...
Add support for DFRobot SEN0390 V30B ambient light sensor (#16105 )
2022-09-02 13:13:47 +02:00
Theo Arends
684584a5e5
Command ``SetOption146 1`` to enable display of ESP32 internal temperature
2022-09-02 11:24:47 +02:00
Theo Arends
14642fb214
Update changelogs
2022-09-01 09:43:20 +02:00
Theo Arends
71c3b98b35
Add download link for v5.14.0
2022-08-31 15:51:21 +02:00
Theo Arends
0e59ddc467
Update changelogs
2022-08-31 11:08:45 +02:00
Theo Arends
4cafaf269c
Update changelogs
2022-08-28 15:05:46 +02:00
Theo Arends
7e34936e6b
Update changelogs
2022-08-27 11:36:12 +02:00
Theo Arends
c0cb49d2c8
TasmotaModbus library from v3.5.0 to v3.6.0
...
TasmotaModbus library from v3.5.0 to v3.6.0 (#16351 )
2022-08-27 11:31:29 +02:00
Theo Arends
f3e677e805
Button debouncing V3 by adopting switch debounce code ( #16339 )
...
Button debouncing V3 by adopting switch debounce code (#15867 )
2022-08-25 17:23:51 +02:00
Theo Arends
58f14301ae
Bump version v12.1.1.1
2022-08-25 14:08:05 +02:00
Theo Arends
a187867070
Lost module name in GUI regression from v12.0.2.4
...
Lost module name in GUI regression from v12.0.2.4 - 20220803 (#16324 )
2022-08-24 17:09:26 +02:00
Theo Arends
871e0dd3a0
Update changelogs
2022-08-24 09:12:15 +02:00
Theo Arends
f08a14cec2
Update changelogs
2022-08-21 11:50:38 +02:00
Theo Arends
103808ce44
Add command ``StatusRetain``
...
Add command ``StatusRetain`` (#11109 )
2022-08-19 14:24:55 +02:00
Theo Arends
49ada1cab9
Update changelogs
2022-08-19 12:30:20 +02:00
Theo Arends
89d9b379d4
Update changelogs
2022-08-19 11:48:26 +02:00
Theo Arends
94c88df93b
Fix RTC not detected when lights are present
...
Fix RTC not detected when lights are present (#16242 )
2022-08-18 15:41:35 +02:00
Theo Arends
9285f89ef7
Bump version v12.1.0.1
2022-08-18 14:39:55 +02:00
Jason2866
f054fcc590
added Catalan "AD"
2022-08-18 13:52:39 +02:00
Theo Arends
6bc0e8dc7b
TasmotaModbus library from v3.4.0 to v3.5.0
...
TasmotaModbus library from v3.4.0 to v3.5.0 (#16245 )
2022-08-18 12:17:31 +02:00
Theo Arends
2cdfcf5345
Update changelog and templates
2022-08-11 14:47:31 +02:00
Theo Arends
4037184ee0
Fix catalan workflows
2022-08-07 11:33:32 +02:00
Theo Arends
0a616df706
Update changelogs
2022-08-07 11:18:57 +02:00
Theo Arends
202ec86453
Update changelogs
2022-08-05 15:52:53 +02:00
Theo Arends
722406a461
Add support for Modbus bridge
...
Add support for Modbus bridge adding commands ``ModbusSend``, ``ModbusBaudrate`` and ``ModbusSerialConfig`` (#16013 )
2022-07-20 10:41:02 +02:00
Theo Arends
846b217427
Bump version to v12.0.2.4
...
- Bump version to v12.0.2.4
- Command ``SetOption45 1..250`` to change default bistable latching relay pulse length of 40 milliseconds (#15856 )
2022-07-16 14:32:18 +02:00
Theo Arends
26f55f752b
Update changelogs with ULP
2022-07-11 10:09:02 +02:00
Theo Arends
cd0f9c7360
Revert "Revert "Add better support for bistable (latching) relays""
...
This reverts commit c6867ddd3d
.
2022-07-09 15:55:27 +02:00
Theo Arends
c6867ddd3d
Revert "Add better support for bistable (latching) relays"
...
This reverts commit 6031e5df98
.
2022-07-09 14:47:36 +02:00
Theo Arends
6031e5df98
Add better support for bistable (latching) relays
...
Add support for bistable (latching) relays mixed with monostable relays using GPIO Relay_b or Relay_bi
2022-07-09 12:27:59 +02:00
Theo Arends
f3b1c4d543
Add POWR3xxD and THR3xxD overflow display
2022-07-07 14:24:53 +02:00
Theo Arends
e6b4a77abd
Add ESP32 Sonoff sensor support
...
- Bump version to v12.0.2.3
- Add ESP32 SI7021, THS01 and MS01 support
- Fix THRxxD template
2022-07-06 16:58:27 +02:00
Theo Arends
cefe015c68
Bump version to v12.0.2.2
...
- Add commands to better control global temperature, humidity and pressure
- Command ``GlobalTemp2 1..250`` to select Global Temperature source indexed from teleperiod occurance data (#15834 )
- Command ``GlobalHum2 1..250`` to select Global Humidity source indexed from teleperiod occurance data (#15834 )
- Command ``GlobalPress2 1..250`` to select Global Pressure source indexed from teleperiod occurance data (#15834 )
2022-06-22 23:45:25 +02:00
Theo Arends
07d2862c7f
Add support for 5-channel light dimmer driver SM2335
...
Add support for 5-channel light dimmer driver SM2335 used in SwitchBot Color Bulbs (#15839 )
2022-06-22 17:28:54 +02:00
Cossid
9774cc8478
Add release note for feature added.
2022-06-21 19:01:32 -05:00
Theo Arends
1747348558
Fixed ESP32 SendMail not working over ethernet
...
Fixed ESP32 SendMail not working over ethernet (#15794 )
2022-06-20 17:44:11 +02:00
Theo Arends
a1dedf0d26
Bump version to v12.0.2.1
2022-06-20 15:40:52 +02:00
Theo Arends
626fb783ea
Fix MQTT rc -4 on TLS connections
...
Fix MQTT rc -4 on TLS connections regression from v12.0.0 (#15809 )
2022-06-20 12:07:31 +02:00
Theo Arends
c988ba1645
Add user control over DNS timeout reducing blocking
...
Add command ``DnsTimeout 100..20000`` to change default DNS timeout from 1000 msec blocking if no DNS server found
2022-06-19 17:57:43 +02:00
Theo Arends
e9708a4e5a
Fix resolving NTP and/or MQTT server
...
- Fix resolving NTP and/or MQTT server names regression from v12.0.0 (#15816 )
- Bump version to v12.0.1.1
2022-06-17 17:35:52 +02:00
Theo Arends
dca2837285
Bump version v12.0.0.1
2022-06-16 14:02:09 +02:00
Theo Arends
85566c5ed3
Fix SHT1X driver hangs and wrong values on ESP32
...
Fix SHT1X driver hangs and wrong values on ESP32 (#15790 )
2022-06-13 14:41:40 +02:00
Theo Arends
93bb0d23b8
Reduce blocking when DNS is unreachable
...
- Reduce blocking by adding WifiPollDns before resolving NTP and/or MQTT server names (#14394 )
- Fix ESP32 Arduino Core WiFi timeout is changed from msec to seconds
2022-06-12 14:36:25 +02:00
Theo Arends
3a22874124
Increase wifi retry time ( #14394 )
...
- Increase wifi retry time (#14394 )
- Remove 1 second system hang on wifi re-connect (retry)
- Try to limit the number of seconds unresponsiveness due to wifi reconnect
2022-06-10 14:49:35 +02:00
Theo Arends
e73828cade
Update release information
2022-06-10 11:32:56 +02:00
Theo Arends
1b701173d0
Rename usb to cdc
2022-06-07 16:37:10 +02:00
Theo Arends
b356e200cd
Update RELEASENOTES.md
2022-06-07 14:35:28 +02:00
Theo Arends
44ce19f26f
Add command ``SSerialSend9 0/1`` to enable Serial Bridge console Tee for debugging purposes
2022-06-06 17:48:40 +02:00
Theo Arends
dae1b32995
Add support for Sensirion SHT4X using define USE_SHT3X ( #15349 )
2022-06-04 16:52:52 +02:00
Theo Arends
d7ffd01f1f
Add support for HYTxxx temperature and humidity sensor ( #15715 )
2022-06-04 14:15:16 +02:00
Theo Arends
59dbd4df3d
Update changelogs
2022-06-02 14:19:20 +02:00
Theo Arends
20e12c2a41
Update changelogs
2022-05-30 11:34:29 +02:00
oogm
72932b9b02
Add feature to changelog
2022-05-29 18:06:26 +02:00
Theo Arends
65a87fd747
Add command ``SetOption141 1``
...
- Add command ``SetOption141 1`` to disable display of module name in GUI header
- Prep SO146-177
2022-05-29 15:49:57 +02:00
Theo Arends
a43c194db6
Add support for Sonoff Zigbee Bridge Pro
...
- Add support for Sonoff Zigbee Bridge Pro by Stephan Hadinger (#15701 )
- Add command ``SspmDisplay 2`` to display Sonoff SPM energy data in GUI for user tab-selected relay modules (#13447 )
2022-05-27 16:08:27 +02:00
Theo Arends
41b82fd076
Possible pin output toggle after power on
...
Possible pin output toggle after power on (#15630 )
2022-05-19 18:02:05 +02:00
Theo Arends
da0a2280b5
Add support for Sonoff SPM v1.2.0
...
- Add support for Sonoff SPM v1.2.0
- Bump version to v11.1.0.3
2022-05-14 14:47:50 +02:00
Theo Arends
a80f33474d
Change to Tasmota Discovery and hatasmota
...
- Prepare to remove dedicated Home Assistant discovery in favour of Tasmota Discovery and hatasmota
2022-05-09 19:31:31 +02:00
Theo Arends
91f42fc8b8
Add ESP32 Command ``Restart 3`` to switch between SafeBoot and Production
2022-05-05 15:24:00 +02:00
Theo Arends
b26e74960e
Update changelogs
2022-05-05 14:35:30 +02:00
Theo Arends
94ebef496d
Version bump to v11.1.0.2
2022-05-04 18:09:26 +02:00
Theo Arends
cab5cb4753
Update changelogs
2022-05-04 15:34:26 +02:00
Theo Arends
d71c1711f2
Add command ``SetOption139 0/1``
...
- Add command ``SetOption139 0/1`` to switch between pressure unit "mmHg" (0) or "inHg" (1) when ``SO24 1`` (#15350 )
- Change double constants to float constants saving 200 bytes
2022-04-19 14:45:26 +02:00
Theo Arends
f8254901d0
Add delayed SetPowerOnState
...
Add delayed SetPowerOnState to Sonoff SPM (#13447 )
2022-04-16 18:20:10 +02:00
Theo Arends
f85e0dd805
Fix BL09xx negative power presentation
...
Fix BL09xx negative power presentation (#15374 )
2022-04-16 17:19:04 +02:00
Theo Arends
7c417430c9
Add energy export active to ADE7880
...
Add command ``EnergyExportActive<phase>`` to (p)reset energy export active for supported devices. Currently ADE7880 only (#13515 )
2022-04-16 16:07:42 +02:00
Theo Arends
3f4f519e5c
Fix Improv initial or erase device installation
...
Fix Improv initial or erase device installation failing to provide Configure WiFi option
2022-04-14 13:38:26 +02:00