Theo Arends
7a6cca6d20
Add command ``WebCanvas``
...
Add command ``WebCanvas linear-gradient(#FF0018 7%,#FFA52C,#FFFF41,#008018,#0000F9,#86007D 93%)`` to set GUI canvas
2023-12-03 15:52:44 +01:00
Theo Arends
70a082c8e5
ESP32 show colorful background if ``WebColor2`` bit0 is not set. Bit0 is default set using #252525
2023-12-03 11:59:16 +01:00
SteWers
b4a54ae880
[Thermostat] Simplify code ( #20141 )
...
* [Thermostat] Simplify code
Simplify code of PR #20133
* [Thermostat] small code changes
- removed unused const
- replaced constant value
2023-12-03 08:08:24 +01:00
Theo Arends
28c8f8cf47
Fix PowerOnState on ESP32 ( #20144 )
2023-12-02 17:49:02 +01:00
Theo Arends
050fdbf5de
Important fix
2023-12-02 17:04:43 +01:00
Theo Arends
b7819bcfac
ESP32 show LHBT background if ``WebColor2`` bit0 is not set. Bit0 is default set using #252525
2023-12-02 16:59:04 +01:00
vtHydroponics
3d0ab2259c
Sensor57 TSL2591 Light Sensor Commands ( #20039 )
...
* Changes from 11/12/2023. Switches made, need debug
* Finalized gain/integration adjustment trees
* Fixed the bugs
* Outputs in JSON, hex displays as hex was decimal
2023-12-02 12:35:56 +01:00
stefanbode
45ba50bb2f
scripter compile error fix ( #20140 )
...
compile error if rules are disabled fixed
2023-12-01 17:14:09 +01:00
Christian Baars
8ee071b8b8
build process: simplify driver selection for BLE ( #20138 )
...
Co-authored-by: Radio Loge <radiologe@MacBook-Pro-von-Radio.local>
2023-12-01 14:59:59 +01:00
Theo Arends
5b13ece33e
Bump version to v13.2.0.3
2023-12-01 14:10:13 +01:00
Christian Baars
673202120f
instantiate correct class Rainbow_stripes ( #20135 )
2023-12-01 10:52:00 +01:00
stegerfa
a9a734ddba
fixed possible char array overflow ( #20133 )
...
* fixed possible char array overflow
the temporary char arrays size was fixed to 4 bytes before.
snprintf was set for the second char, so maximum size must be limited to 4-1, instead of 4 bytes.
to avoid further mistakes usage of a #define
(assuming that flaw made never problems as the number of attached sensors was usually <99)
* fixed possible char array overflow, optimization of preprocessor-constant name
instead using shortname TEMPLEN for the preprocessor-constant using a name specific to the thermostat-function to avoid interference with the rest of the project
* fixed possible char array overflow, no preprocessor constant neccessary
fixed possible char array overflow, without using preprocessor constant
2023-12-01 09:14:42 +01:00
stefanbode
9a010bdf7d
fix on undef TIMERS ( #20123 )
...
fix compilation error
2023-11-30 08:54:08 +01:00
stefanbode
47bc321ebb
Fix compile issue with rules and startup procedure of deepsleep ( #20122 )
...
* Fix compile issue with rules and startup procedure of deepsleep
* fix
* fix inc with old functionality
fix a side effect with the old behavior
2023-11-29 15:36:43 +01:00
stefanbode
d0f47efae5
Integrate TIMERS into Deepsleep ( #20117 )
...
* Integrate Timers into Deepsleep
Added new functionality to controll the Deepsleep Wakeup process with TIMERS.
* added 60sec initial runtime
2023-11-28 11:38:46 +01:00
Christian Baars
fb51d9df8a
MI32 GUI changes ( #20115 )
2023-11-27 19:08:44 +01:00
Theo Arends
62afe918f0
Add webquery message when empty response
2023-11-27 15:59:27 +01:00
Theo Arends
07031d5ebf
Fix ``WebQuery`` response buffer corruption and format character ``%`` ( #20111 )
2023-11-27 15:22:30 +01:00
Barbudor
3273aaa9f9
Fix ESP32 webquery response ( #20111 )
...
* logging webreponse
* to test
* final
* simple
2023-11-27 12:38:52 +01:00
Theo Arends
22f50abf22
Fix compile error
2023-11-24 17:20:21 +01:00
Theo Arends
01e51b2c9d
Fix undocumented use of Energy struct
2023-11-24 16:49:51 +01:00
Theo Arends
2cee622af8
ESP32 remove restart energy logging if no energy monitoring is selected
2023-11-24 16:36:41 +01:00
Theo Arends
ad831418e5
Fix SO51
2023-11-24 11:36:20 +01:00
Steve
3568b559e4
Add Support for Avago Tech Bluetooth Buttons ( #20088 )
2023-11-23 12:00:34 +01:00
s-hadinger
1c60527099
Berry `scale_int`, equivalent of `scale_uint` for signed integers ( #20090 )
2023-11-23 11:31:26 +01:00
s-hadinger
1cd13d7f66
Fixed `changeUIntScale` for linearity when expanding range ( #20089 )
2023-11-23 10:57:47 +01:00
papax333
77081ad92b
corrected ebus crc check ( #20081 )
2023-11-22 11:57:10 +01:00
Daniel Kucera
7e2fbdea55
tuyamcu: allow sending arbitrary commands ( #20077 )
2023-11-22 11:37:01 +01:00
Theo Arends
433d69d4bc
Fix serial resource checks
...
Fix serial resource checks (#20053 )
2023-11-20 12:35:06 +01:00
gemu
7d30ab5929
support for kamstrup heat meters ( #20057 )
2023-11-20 09:05:54 +01:00
SteWers
f4ad7586bb
Multilingual fixes ( #20064 )
...
* Multilingual fixes
Some fixes for a better user experience matching every language.
* Revert frag mem
Solved problem with regional decimal conversion in language file.
2023-11-20 09:05:40 +01:00
bovirus
1e7c2a9dd2
Update Italian language ( #20050 )
2023-11-18 14:20:45 +01:00
Theo Arends
74aa056650
Final fix ESP32C3 relay toggle
...
Final fix ESP32C3 relay toggle on restart (#20030 )
2023-11-17 16:17:29 +01:00
Theo Arends
5297bab041
Revert "Final fix ESP32C3 relay toggle"
...
This reverts commit 4489dba8dd
.
2023-11-17 16:06:45 +01:00
Theo Arends
4489dba8dd
Final fix ESP32C3 relay toggle
...
Final fix ESP32C3 relay toggle on restart (#20030 )
2023-11-17 15:43:42 +01:00
Theo Arends
b02a66a1b6
Fix ESP32C3 relay toggle on restart
...
Fix ESP32C3 relay toggle on restart (#20030 )
2023-11-17 13:02:19 +01:00
SteWers
040e25a92c
Label of upload button ( #20036 )
...
As the label of the upload button is concatenated at runtime, this does not match in all languages. To solve this, there is now a full label text for `Start upgrade` and `Start restore`.
2023-11-17 10:35:29 +01:00
Theo Arends
f0162377e2
Fix ESP32-C3 gpio hold
...
Fix ESP32-C3 gpio hold on non-relay gpios (#20030 )
2023-11-16 10:26:21 +01:00
SteWers
c3674bd08f
Enhance de_DE.h ( #20027 )
...
* Enhance de_DE.h
* Update de_DE.h
2023-11-16 10:17:58 +01:00
s-hadinger
bc8dd8894e
Fix compilation for Audio Core3 ESP32C3 ( #20023 )
2023-11-14 22:20:26 +01:00
stefanbode
dd9e2a7409
regression of MAX_SHUTTERS for stepper motors ( #20019 )
...
maximize on 4 stepper shutters due to limits in number of counter
2023-11-14 17:54:01 +01:00
Jason2866
7abf8c469b
Align arduino3 firmware build to Tasmota32 ( #20015 )
...
* step1 of phase out Arduino30 firmware variant
* rm duplicate Matter define
2023-11-14 17:02:00 +01:00
Jason2866
58f50045d9
Add the possibility to set global compile time settings ( #20013 )
2023-11-14 16:36:09 +01:00
SteWers
52a0d5b365
[Thermostat] Fix JSON index ( #20011 )
...
* [Thermostat] Fix JSON index
* Fix index in debug log
2023-11-14 10:00:55 +01:00
Christian Baars
0b54b7df40
fix compilation without PARTITION_WIZARD ( #20009 )
2023-11-14 08:52:09 +01:00
Theo Arends
7e384ebff8
Add image name to GUI footer
2023-11-13 14:41:49 +01:00
Theo Arends
c1fa07dd51
Fix ESP32C3 ledlink
2023-11-13 10:54:25 +01:00
SteWers
84249ca32f
Update de_DE.h ( #19995 )
2023-11-13 10:32:39 +01:00
bovirus
fa34338476
Update Italian language ( #20002 )
2023-11-13 10:31:37 +01:00
s-hadinger
65e07e8387
Fix Berry `gpio.dac_voltage()` broken in 13.2.0 ( #19997 )
2023-11-12 22:17:17 +01:00
Jason2866
44ef425b89
disable warning only for specific compiler version ( #19994 )
2023-11-12 19:01:41 +01:00
SteWers
64f0520b23
[Thermostat] Change to language files ( #19982 )
...
* [Thermostat] Change to language files
* [Thermostat] Gradient display
Enhance display of gradient temperature
2023-11-12 11:26:45 +01:00
s-hadinger
de1b5929b8
Partition Wizard can be loaded dynamically ( #19980 )
...
* Partition Wizard can be loaded dynamically
* Centralize config
* Don't display duplicate buttons
* Fix test
2023-11-11 23:52:41 +01:00
Norbert Richter
c88b773dd3
Neopool enhancements ( #19973 )
...
* Add NeoPool sensor delta trigger
* Add NeoPool store settings in unified file system
* Add NeoPool command NPBoost
2023-11-11 11:49:40 +01:00
Theo Arends
098e29d7e0
Update support_esp32.ino
2023-11-10 12:42:13 +01:00
Theo Arends
ede5e398a6
Refactor hardware specific code
2023-11-10 12:24:20 +01:00
Theo Arends
7febc11b8c
Fix C2/C6 exception
2023-11-10 11:20:41 +01:00
Theo Arends
211da12342
Update feature list
2023-11-09 15:32:43 +01:00
Theo Arends
c6ca0ff10f
Squeeze some bytes out of it
2023-11-09 14:59:31 +01:00
Christian Baars
cf6de0ce31
add AES_CBC to crypto module ( #19964 )
2023-11-09 14:27:17 +01:00
Theo Arends
9b5945a117
Add feature10 bitmap
2023-11-09 14:25:24 +01:00
Christian Baars
06bacdf48b
refactoring, use ringbuffer for server too ( #19953 )
2023-11-07 20:27:43 +01:00
gemu
1e4f069c3f
can bus read and write support, esp32 native twai ( #19934 )
2023-11-07 16:15:14 +01:00
s-hadinger
9cfe78a8a0
Audio refactoring of DAC ( #19939 )
2023-11-06 08:52:11 +01:00
s-hadinger
3207d542c1
Fix Zero-Cross Dimmer for ESP32 with Core3 ( #19929 )
...
* Fix Zero-Cross Dimmer for ESP32 with Core3
* Remove left-over
* Fix esp8266
2023-11-04 19:19:48 +01:00
Norbert Richter
5d4330611a
Add NeoPool NPHydrolysis percent and unit ( #19924 )
2023-11-04 15:42:01 +01:00
Jason2866
361c15d63b
Delete homekit.c ( #19923 )
2023-11-04 13:05:48 +01:00
s-hadinger
fbe31ab294
Fix Core3 warnings when compiling LVGL ( #19921 )
2023-11-04 12:22:44 +01:00
s-hadinger
46df036b51
Cosmetic changes ( #19920 )
2023-11-04 11:46:25 +01:00
protectivedad
11e9b7375d
The webserver for the esp32-cam stream doesn't get started automatically. ( #19905 )
...
This ensures that it does start when the WcStream (or WcInterrupt) are run.
Co-authored-by: Anthony Sepa <protectivedad@gmail.com>
2023-11-03 16:02:42 +01:00
stefanbode
b83516970f
fix #19911 tilt position is not restored with command: shutterposition 0,-45 ( #19916 )
...
* fix shutterposition 0,-45 does not keep tilt
allow , on different config settings
* fix shutterposition 0,-45 does not maintain tilt
allow , on different config settings.
2023-11-03 16:01:57 +01:00
Theo Arends
f78c195945
Update changelogs - Bump version v13.2.0.2
2023-11-03 14:20:36 +01:00
gemu
2d05bd2597
add tcp client, fix timer issue ( #19914 )
2023-11-03 10:39:18 +01:00
s-hadinger
217c568301
HASPmota add styling properties ( #19912 )
2023-11-02 22:11:48 +01:00
Theo Arends
63297ec5c9
Start using constexpr in featurelist
...
Saves 128 bytes.
2023-11-02 17:44:29 +01:00
Christian Baars
580c46177f
MI32: fix restart on C6 ( #19909 )
2023-11-02 13:55:15 +01:00
Jason2866
6a86576dac
add MI env ( #19902 )
...
* rename odroid ard3 env to tasmota32-psramfix_ard3
* add inbuilt JTAG debugger
* rm Homekit leftovers
* add MI env
2023-11-02 12:03:14 +01:00
Jason2866
3da80e9144
Enable IR Remote ( #19908 )
2023-11-02 11:33:07 +01:00
Christian Baars
c238d8d4d1
several updates ( #19893 )
2023-11-01 17:30:22 +01:00
stefanbode
2e95f45458
continuous improvement ( #19897 )
...
- servo fix on movement during operation. position did not behave as expected if position change before stop
- enhanced minimum change on stepper shutter depending on motordelay
2023-11-01 14:15:52 +01:00
Barbudor
f9717ceb7f
fix compile USE_PID ( #19890 )
2023-10-31 20:42:42 +01:00
stefanbode
24927f17c9
enhancement servo shutter ( #19888 )
...
allow on servo also very small changes of position. need to do similar with steppers later
2023-10-31 20:41:41 +01:00
Theo Arends
6410e72b6c
Add max size
2023-10-30 21:52:58 +01:00
Theo Arends
09f473b734
A future proof solution ;-)
2023-10-30 21:47:49 +01:00
Jason2866
b0d5cffe16
Add flash mode `OPI` to Tasmota info page ( #19881 )
...
* add OPI mode to info page
2023-10-30 18:27:25 +01:00
Theo Arends
444f4fcd62
Fix ESP32 32MB program flash size
2023-10-30 15:29:01 +01:00
stefanbode
8540ee37fc
fix on servo and ESp32 ( #19878 )
...
servo did not react same on ESP32 than ESP8266. Changed to TASMOTA pwmapply capabilities
2023-10-30 14:48:32 +01:00
anishsane
be94a6cac8
Fix for CmndHDMIAddr function. ( #19866 )
...
* Fix for CmndHDMIAddr function.
1. Typical values for XdrvMailbox.payload are 0x1000...0x4000. Hence the
check should be (value > 0).
2. Don't overwrite the user supplied value with value read from the hardware.
* Correct the condition in CEC_Device::OnReady.
We should check for _on_ready_cb before calling _on_ready_cb.
2023-10-29 17:14:44 +01:00
Alexander Nagy
b3b0ffd6b0
Adding display.ini for 1.44 inch 128x128 red SPI display ( #19862 )
2023-10-29 13:16:32 +01:00
Theo Arends
26f14caee9
Fix S2 core3 compiles
2023-10-28 16:20:44 +02:00
Norbert Richter
b65f32c5f3
Neopool enhancements for HA ( #19857 )
...
* Add NeoPool hydrolysis setpoint and max
* Add NeoPool command ``NPFiltrationSpeed``
* Change NeoPool topic ``Power`` to ``Powerunit``
* Add ``SO157`` for NeoPool output sensitive data
2023-10-28 14:07:49 +02:00
Jason2866
75ec9da8a2
Refactoring of storing safeboot bin ( #19858 )
...
* Folder for storing safeboot is now configurable
* Platform 2023.10.06
* Platform 2023.10.12
2023-10-28 13:15:31 +02:00
FransOv
0130ce972a
Support of Winsum ZH03B sensor Dust particle sensor in xsns_18_pms5003.ino ( #19850 )
...
* Update xsns_18_pms5003.ino
The Winsum ZH03B sensor is quite similar to the Plantower PMS3003 sensor. The main difference is the response in passive mode. With these changes xsns_18_pms5003.ino can support the ZH03B sensor when PMS_MODEL_ZH03X is defined in the configuration file.
* Update xsns_18_pms5003.ino
2023-10-27 17:34:49 +02:00
Theo Arends
84eaae572c
Fix core 3 S2 USB
2023-10-24 17:00:11 +02:00
Theo Arends
5c395ffc06
Fix core 3 S2 USB
2023-10-24 16:41:36 +02:00
Theo Arends
84ced0fcab
Add ESP32 core v3 auto TasConsole USB or Serial connection by @staars
2023-10-24 16:32:39 +02:00
Barbudor
1d5f55d374
increase MAX_HUE_DEVICES to 32 ( #19820 )
2023-10-23 09:36:39 +02:00
s-hadinger
4f9c7ada04
Fix audio Arduino 3 ( #19819 )
2023-10-22 21:30:36 +02:00
Theo Arends
0ae793a8d4
Save some bytes
2023-10-21 17:37:31 +02:00
Theo Arends
57860b692d
Fix GpioRead ( #19810 )
2023-10-21 17:20:55 +02:00
s-hadinger
356de1a16a
Add command ``GpioRead`` ( #19814 )
...
* Add command ``GpioRead``
* change output
2023-10-21 15:56:40 +02:00
Theo Arends
6efe2ab514
Add I2C bus2 support to LM75AD temperature sensor
2023-10-21 15:42:32 +02:00
Theo Arends
bec0c27750
Add I2C bus2 support to SI1145/6/7 Ultra violet index and light sensor
2023-10-21 15:31:54 +02:00
Theo Arends
bd90363565
Update changelogs
2023-10-21 14:48:12 +02:00
Theo Arends
c91882daeb
Add ADS1115 I2C bus2 support
2023-10-20 17:39:00 +02:00
Theo Arends
7238d857e9
Add SHT3x I2C bus2 support
2023-10-20 14:52:21 +02:00
Theo Arends
f05470bf81
Add HYT I2c bus2 support
2023-10-20 13:35:24 +02:00
Norbert Richter
1f8cd6a259
Fix NeoPool filtration mode display ( #19801 )
2023-10-19 18:01:56 +02:00
Theo Arends
e3253fea8f
Add I2C bus2 support to BH1750
2023-10-19 18:01:12 +02:00
Theo Arends
b39adacc41
Fix HTU21 bus number
2023-10-19 17:44:59 +02:00
Theo Arends
49709807c7
Add I2C bus2 support to HTU temperature sensor
2023-10-19 17:37:19 +02:00
Theo Arends
b6811b2f4e
Prep ESP32 I2C bus2 support
2023-10-19 16:59:53 +02:00
Theo Arends
70287d90ad
Bump v13.2.0.1
2023-10-19 11:45:12 +02:00
stefanbode
d5f506b1e3
reverted back some function and fix frequency storage ( #19791 )
...
* optimize disc write delay during shutter movement
changed to dynamic write delay to ensure no disc write on multiple shutter movement with stepper shutters.
* optimize disc write delay
ensure disc write will be postponed until all shutters stopped
* reverted back to simple version
* removed duplicate obsolete compiler options
2023-10-18 23:41:52 +02:00
Theo Arends
58324da242
Final fix ;-) ( #19763 )
2023-10-18 16:19:13 +02:00
Theo Arends
1fa036f176
Fix unsorted DS18Alias ( #19763 )
2023-10-18 16:12:02 +02:00
Theo Arends
13c6bc91cc
Fix empty name if no DSAlias defined ( #19763 )
2023-10-18 15:15:49 +02:00
stefanbode
2daaa367ff
stepper shutter channel fix ( #19784 )
2023-10-18 11:29:35 +02:00
Christian Baars
17143cea44
remove HomeKit remnants from mi32 legacy driver ( #19782 )
2023-10-17 21:00:46 +02:00
sfromis
ab420b6cc1
DS18x20_USE_ID_AS_NAME in my_user_config.h ( #19777 )
...
Add mention of #define DS18x20_USE_ID_AS_NAME
2023-10-17 11:00:39 +02:00
Christian Baars
b98ad59d11
Delete xsns_62_esp32_mi_homekit.c ( #19778 )
2023-10-17 11:00:02 +02:00
s-hadinger
82858616f6
Zigbee fix timezone when device reads LocalTime attribute ( #19772 )
2023-10-17 09:02:14 +02:00
Barbudor
8e9299ec97
fix mis-order ( #19769 )
...
* fix mis-order
* fix mis-order on esp32 too
2023-10-16 21:47:31 +02:00
bovirus
5a9da83997
Update Italian language ( #19754 )
2023-10-16 16:07:37 +02:00
s-hadinger
367768b00e
Re-enable features for Arduino 3 ( #19761 )
2023-10-16 12:44:05 +02:00
Norbert
a04995a3f4
Update xdrv_63_modbus_bridge.ino, brackets not needed. ( #19759 )
2023-10-16 09:42:55 +02:00
JeroenSt
91ba05ac3b
ModbusBridge write memleak fix (19733) ( #19758 )
...
Co-authored-by: JeroenSt <nospam@nospam.org>
2023-10-16 08:26:26 +02:00
s-hadinger
8467b41290
Teleinfo use Apparent Power as Active Power approximation ( #19756 )
2023-10-16 08:20:07 +02:00
s-hadinger
d3784a26ab
Audio Core3 compilation for ESP32C3 ( #19755 )
2023-10-15 22:46:01 +02:00
stefanbode
124fbf8dcb
fix shutterfrequency change on mutiple channels ( #19737 )
...
* fix shutterfrequency change on mutiple channels
* LEDC channel management for stepper shutter
LEDC channels dynamically assigned to ensure up to 16 shutters can be defined. Number of simultaneous moving shutters is limited by number of LEDC channels.
* bugfix >=
2023-10-15 18:40:26 +02:00
Jason2866
56314e5423
Update de_DE.h
2023-10-15 14:51:11 +02:00
Saentist
715b64dc28
RU Translation fix ( #19746 )
2023-10-15 11:57:53 +02:00
Eduardo Spremolla
b63a061aeb
Update xsns_02_analog.ino for calibrated values on ESP32 ( #19732 )
...
ESP32 ADC has variables errors, but calibrations values are put in eFuses at factory test.
analogReadMilliVolts() from api correct the ADC reading with tata values.
Since now the value are mV and not ADC numbers, the fast solution is to revert it back to ADC numbers:
divide by Vcc => ANALOG_V33*1000 and multiply by ANALOG_RANGE
Other way is to modify all sensor cases to account for the different unit.
2023-10-15 11:57:13 +02:00
s-hadinger
16307bc4b8
More audio refactoring for core3 ( #19749 )
2023-10-15 11:22:20 +02:00
bovirus
67deceeba8
Update Italian language ( #19730 )
2023-10-13 17:50:06 +02:00
Jason2866
2950de0016
rm WifiClientSecure
2023-10-13 16:57:01 +02:00
Theo Arends
0984c01828
Update changelogs
2023-10-13 14:50:51 +02:00
Theo Arends
5cee525d02
Add Active Power Total
...
Add Active Power Total if multiple phases AND both positive and negative values (#19141 )
2023-10-13 13:56:04 +02:00
chefpro
32cbd330aa
Add Rescan and RetryRead to onewire scan for bulletproove onewire ( #19700 )
...
Co-authored-by: Peter Rustler <peter@rustlerit.de>
2023-10-13 11:29:19 +02:00
nusse
f245821828
HC8 sensor support ( #19714 )
...
* HC8 sensor support
* HC8: fix json
* HC8: missing languages
* HC8: move macros to proper locations
---------
Co-authored-by: Daniel Maier <daniel.maier@tu-berlin.de>
2023-10-13 11:28:41 +02:00
Jason2866
a3dcbc6661
Remove `WiFiClientSecure` ( #19725 )
...
* Update HttpClientLight.cpp
* Update HttpClientLight.h
* Update Powerwall.h
* Update xdrv_10_scripter.ino
2023-10-12 20:10:16 +02:00
bovirus
4eefed79ac
Update Italian language ( #19712 )
2023-10-11 17:12:25 +02:00
stefanbode
dade00bf59
Fix shutterfrequency esp32 ( #19717 )
2023-10-11 17:12:07 +02:00
Paul Blacknell
663e6ab21b
Update xsns_110_max17043.ino ( #19709 )
2023-10-09 16:52:56 +02:00
Paul Blacknell
f41e525f5a
fix: account for MAX17043 alert status on start ( #19708 )
2023-10-09 16:14:41 +02:00
Theo Arends
39e0cf574d
Refactor AP1 information
2023-10-09 11:33:24 +02:00
tyler.li
a1cce95c08
MAX31855/MAX6675 sensors driver support up to 6 ( #19704 )
...
* Support multiple MAX31855/MAX6675 sensor up to 6
* code format
* revert tasmota_template_legacy.h
* revert original variable names
* revert original variable names
---------
Co-authored-by: arendst <mhtarends@gmail.com>
Co-authored-by: litao07 <litao07@kuaishou.com>
2023-10-09 10:44:24 +02:00
SteWers
6bec09b23f
[WebUI] WiFi Information ( #19705 )
...
* [WebUI] WiFi Information
Structured and more infos on WebUI Information page
* [WebUI] WiFi Info multiple lines
Divide one long line into multiple short lines
2023-10-09 08:39:12 +02:00
chefpro
9fbb4a8b0b
Fix modbus receive handling for float types ( #19697 )
...
Co-authored-by: Peter Rustler <peter@rustlerit.de>
2023-10-08 13:14:53 +02:00
s-hadinger
8c6788c6bc
Audio exclusive mode ( #19698 )
2023-10-07 22:11:37 +02:00
s-hadinger
bf9c5b86c6
Remove warnings when compiling Audio with Arduino 3 ( #19687 )
2023-10-06 19:47:10 +02:00
Theo Arends
74bcbd898e
Fix compilation when webserver disabled
2023-10-06 12:17:37 +02:00
Theo Arends
21ac018d70
Fix compile error
2023-10-06 11:23:58 +02:00
Matteo Albinola
2302d38eb0
Windmeter: add measure interval setting ( #19542 )
...
* Add new setting windmeter_measure_intvl and update speed computation
* Ensure windmeter_measure_intvl is not below 1
* Keep same settings order in response messages and add better comments
2023-10-06 10:53:38 +02:00
s-hadinger
c5c78f45d0
Fix audio_slm.be
2023-10-06 08:11:29 +02:00
s-hadinger
11aad19800
Audio support for Microphone + Berry ( #19677 )
2023-10-05 21:47:07 +02:00
Theo Arends
d96ed15e95
Bump version v3.1.0.4
2023-10-04 13:52:08 +02:00
Theo Arends
99df8edc2d
Fix ESP32 chip version number
2023-10-04 12:47:58 +02:00
s-hadinger
473a8ee999
Audio refactoring, filters and I2SConfig ( #19662 )
2023-10-03 22:39:02 +02:00
s-hadinger
e32c39f21d
Fix access to version from Berry
2023-10-03 19:21:47 +02:00
Christian Baars
58d43333f5
conform to API changes ( #19654 )
2023-10-03 16:20:48 +02:00
s-hadinger
77cba731b9
Partition_Wizard compatible with grow on mount ( #19645 )
2023-10-02 23:32:55 +02:00
s-hadinger
795a194d65
Audio prepare for Arduino3 ( #19637 )
2023-10-02 09:18:53 +02:00
Christian Baars
f0b7984466
MI32 legacy: add mi32name, small fixes ( #19619 )
...
* add mi32name, small fixes
* remove unused variable
2023-09-29 17:47:17 +02:00
stefanbode
540acdc638
smaller fixes ( #19621 )
...
* position report during moverment
during moving the teleperiod will now report the actual position
* fix error on inverted shutter
2023-09-29 17:46:41 +02:00
Barbudor
335e18e8cb
Allow webbutton up to 32 ( #19580 )
...
* Allow webbutton up to 32
* use named const
2023-09-29 09:56:52 +02:00
gemu
3bcdf9487d
fix compile error with new email lib ( #19608 )
2023-09-27 18:36:38 +02:00
stefanbode
955d2d86dd
fix JSON Bug ( #19607 )
2023-09-27 16:05:32 +02:00
s-hadinger
31e56903c5
Audio refactoring and fixes ( #19594 )
2023-09-25 23:31:32 +02:00
stefanbode
0f6b59f67e
fix #16560 ( #19589 )
...
shutter reacted on QUAD press with HOLD event. Fixed
2023-09-25 09:25:45 +02:00
s-hadinger
74900edc96
Audio change of configuration file format ( #19585 )
2023-09-24 18:59:43 +02:00
Christoph Friese
5d97a73ddf
Add ENS16x (air quality) and ENS210 (temp & RH) sensors ( #19479 )
...
* Add files via upload
Added ENS16x library enabling read-out of ENS160 and ENS161 sensor component (follow-up of CCS811 and iAQcore)
Added ENS210 library to read out ENS210 temperature & humidity sensor
* Add files via upload
Add air quality sensor readout for ENS160 and ENS161 checking two possible I2C addresses (follow up sensor for CCS811 and iAQcore)
Add temperature and humidity sensor readout checking two possible I2C addresses
* Update BUILDS.md
Add USE_ENS16x and USE_ENS210
* Update decode-status.py
Add USE_ENS16x and ENS210
* Update I2CDEVICES.md
Add USE_ENS16x and USE_ENS210
* Update my_user_config.h
Add USE_ENS16x and USE_ENS210
* Update support_features.ino
Add USE_ENS16x and USE_ENS210
* Update tasmota_configurations.h
Add USE_ENS16x and ENS210
* Update tasmota_configurations_ESP32.h
Add USE_ENS16x and USE_ENS210
* Update xsns_111_ens16x.ino
Corrected I2X number
* Update xsns_112_ens210.ino
Corrected I2C number
* Disable USE_ENS16x and USE_ENS210 by default
* Added code size information
* cut down in libs
* optimize tasmota side
* fix ens16x web display
* final fix on alternate addresses
* update code & RAM usage
---------
Co-authored-by: Barbudor <barbudor@barbudor.net>
2023-09-24 18:30:15 +02:00
Barbudor
0d7c2dee72
support https URL ( #19582 )
2023-09-24 15:39:20 +02:00
s-hadinger
81d287a3b0
Berry fix audio MP3 ( #19578 )
2023-09-23 12:23:51 +02:00
s-hadinger
375c825d32
More cleaning of audio for ESP32 ( #19577 )
2023-09-23 11:25:58 +02:00
s-hadinger
06da24df83
Update berry scripts for Shelly ( #19535 )
2023-09-22 17:32:34 +02:00
Andrew Klaus
3061b06f3b
Adding SGP40 support to SGP4X driver ( #19560 )
2023-09-22 10:15:04 +02:00
stefanbode
7a75eb7021
Improvement in shuttersetup ( #19565 )
...
* Improvement in shuttersetup
- reduce call of energy to 10x a sec.
- stop detection more rigid to avoid wrong messages
- more accurate calculation of duration
* fix energy hickup on autosetup
2023-09-22 08:38:01 +02:00
s-hadinger
761ddaa57b
Berry counter 0-base ( #19561 )
2023-09-21 09:42:28 +02:00
s-hadinger
7de25acac0
Minor refactoring of audio code for Arduino3 ( #19559 )
2023-09-21 09:00:28 +02:00
s-hadinger
fc513af351
Berry counter ( #19558 )
...
* Berry read and write Counters
* rename counter
2023-09-20 22:28:40 +02:00
Theo Arends
ffd09da89a
Fix DS18B20 for ESP32 with over 33 gpios
2023-09-19 15:20:10 +02:00
s-hadinger
ddeb380a19
I2S improvements to MP3 play ( #19547 )
2023-09-18 22:49:49 +02:00
Christian Baars
d6a9eaf8aa
Preps for IDF5.1: microphone/input for i2s audio ( #19544 )
2023-09-18 20:39:15 +02:00
s-hadinger
2d0339e8bf
Fix IR compilation for ESP32 with Arduino3 ( #19537 )
2023-09-17 21:12:36 +02:00
Paul Blacknell
d2aee662fd
fix: add command data to cmnd response ( #19524 )
2023-09-15 22:16:27 +02:00
Theo Arends
d595e64600
Bump version v13.1.0.3
2023-09-14 15:49:31 +02:00
Theo Arends
81fc4e336b
Fix Arduino3 compilation
2023-09-14 14:17:51 +02:00
Theo Arends
2682d82628
Fix ESP32C3 relay click on restart
2023-09-13 23:16:38 +02:00
s-hadinger
00bd97fdc7
Matter virtual lights ( #19511 )
2023-09-13 22:49:46 +02:00
Theo Arends
860e12b88a
Add frequency to BL0942
2023-09-13 15:49:14 +02:00
Theo Arends
fffd68ad9c
Fix BL0942 higher baudrates
2023-09-13 15:09:30 +02:00
gemu
cb4671ee88
fix hardware serial port swap on ESP8266 ( #19505 )
2023-09-13 09:09:01 +02:00
Theo Arends
088ac1815b
Add BL0942 baudrate selection
2023-09-12 21:48:13 +02:00
Theo Arends
ee43b43add
Fix ESP8266 compilation ( #19485 )
2023-09-12 15:01:30 +02:00
Theo Arends
16aab339e7
Clean up support command code
2023-09-11 11:45:27 +02:00
Theo Arends
597c3655b0
Fix MAX17043 invalid JSON ( #19495 )
2023-09-11 11:35:26 +02:00
Paul Blacknell
728b1b2d36
Update xdrv_29_deepsleep.ino ( #19492 )
2023-09-10 22:35:54 +02:00
Paul Blacknell
b117164993
Improved parsing of accumulation data from HRG-15 rain sensor ( #19485 )
...
* fix: more robust parsing of accumulation data
* fix: further parsing checks
2023-09-10 22:33:54 +02:00
Theo Arends
0e6a012499
Fix possible MQTT disconnect exception
2023-09-09 23:30:55 +02:00