Commit Graph

1320 Commits

Author SHA1 Message Date
Theo Arends 73cd5cee25 Add support for US AQI and EPA AQI in PMS5003x sensors (#22294) 2024-10-25 14:44:42 +02:00
Theo Arends 16a145f809 Fix ESP32(C3) DALI transmit stability by disabling interrupts 2024-10-25 12:39:36 +02:00
Theo Arends 886221a1d6 Add experimental support for Shelly DALI Dimmer Gen3 (See template in file xdrv_75_dali.ino) 2024-10-24 23:03:14 +02:00
Theo Arends 80686a8c52 Update changelogs 2024-10-24 11:05:07 +02:00
Theo Arends 7f6dbfbeac Update changelogs 2024-10-23 16:12:20 +02:00
Theo Arends 2b6acff4f4 Bump version to v14.3.0.2
- DALI command `DaliGear` to set max found gear to speed up scan response
- DALI command `DaliGroup` to add gear to groups
- DALI command `DaliTarget` to set light control broadcast, group number or gear number
- DALI renamed commands `DaliCommission` to `DaliScan` and `DaliWeb` to `DaliLight`
- DALI set Tasmota light control as default
2024-10-22 12:38:56 +02:00
Theo Arends bd88ddc56d Update changelogs 2024-10-20 14:09:58 +02:00
Theo Arends 91604b9f2a Update changelogs 2024-10-18 23:06:26 +02:00
Theo Arends 4948b70acd Update changelogs
Add DALI short address and group support
2024-10-17 17:44:05 +02:00
Theo Arends 69f7f155dd Bump version v14.3.0.1 2024-10-15 11:03:45 +02:00
Theo Arends 763cc8319d Update changelogs 2024-10-14 23:15:00 +02:00
Theo Arends fa82a48789 Fix Sonoff WTS01 temperature sensor shows incorrect negative temperature (#19373) 2024-10-14 15:28:33 +02:00
Theo Arends 3969c80242 Add DALI commands (#22214)
- Add command ``DaliSend <address>|<address+256>,<command>`` to send command (address+256 is repeat) on DALI bus
- Add command ``DaliQuery <address>|<address+256>,<command>`` to send command (address+256 is repeat) on DALI bus and wait up to DALI_TIMEOUT ms for response
2024-10-14 12:27:01 +02:00
Theo Arends 0c7e8c67f3 Update changelogs 2024-10-13 12:03:31 +02:00
Theo Arends 4b06cb27b0 Adhere to DALI naming 2024-10-11 17:27:12 +02:00
Theo Arends a839144491 Update changelogs 2024-10-11 11:54:08 +02:00
Theo Arends 04f3df8bf6 Add command ``DaliWeb 1`` to enable light control for broadcast address
- Change DaliDimmer range from 0..254 to 0..100
2024-10-10 17:49:11 +02:00
Theo Arends f8fbe15300 Fix ESP32 Ethernet using EthClockMode 3 (#22248) 2024-10-09 17:31:33 +02:00
Theo Arends 6bc2e50d9c Update changelog 2024-10-08 10:22:28 +02:00
Theo Arends 4196f753c8 Update changelogs 2024-10-06 22:40:28 +02:00
Theo Arends 0240da2bf7 Fix Dali received data decoding
- Add support for DALI 1 on ESP8266
2024-10-06 21:57:59 +02:00
Theo Arends 4cbb1b1c58 Update changelogs 2024-10-02 14:18:08 +02:00
Theo Arends 69c19d95ae Update changelogs 2024-09-30 11:12:14 +02:00
Theo Arends b2b839fa83 Add support for Sonoff SPM v1.3.0 (#13447) 2024-09-28 17:57:31 +02:00
Theo Arends 692a0ca4b1 Bump version 14.2.0.6 2024-09-26 17:38:49 +02:00
Theo Arends 27a4ea0f70 Add Support for BL0906 up to 6 channel energy monitor as used in Athom EM2/EM6 (#22167) 2024-09-25 18:05:16 +02:00
Theo Arends 61aeea9132 Add ESP8266 support for one-wire M1601 temperature sensor on DS18x20 GPIO (#21376) 2024-09-25 15:01:19 +02:00
Theo Arends 64de5497f4 Bump version v14.2.0.5
- Add ESP8266 support for I2C CLK on GPIO16 (#22199)
2024-09-24 17:44:15 +02:00
Theo Arends f3aed72f97 Update changelogs 2024-09-23 15:53:35 +02:00
Theo Arends d5289e8ba9 Update changelogs 2024-09-20 12:09:34 +02:00
Theo Arends 83eb8aeaa7 Update changelogs 2024-09-20 12:01:15 +02:00
Theo Arends 9238ee73d6 Add ESP8266 experimental support for second I2C bus 2024-09-19 14:47:18 +02:00
Theo Arends a9f0623769 SCD30 Lowered I2C clock from 100k to 50k (#15438) 2024-09-19 11:15:04 +02:00
Theo Arends d0d075a1b4 Refactored I2C drivers SHT3x and iAQ 2024-09-19 11:11:08 +02:00
Theo Arends 0dfab3684c Update changelogs 2024-09-19 09:58:36 +02:00
Theo Arends a5730a76f9 Add command entered to command error and command unknown message 2024-09-17 16:24:45 +02:00
Theo Arends fd7d2fc0a4 Add entered command to MQTT command unknown message 2024-09-17 10:00:47 +02:00
Theo Arends 97970974fc Refactored I2C drivers HTU21, BH1750 and HYT 2024-09-16 16:27:30 +02:00
Theo Arends a3892ecbc4 Update change logs 2024-09-14 16:13:14 +02:00
Theo Arends 1dff0b4b27 Add support for RX8010 RTC as used in IOTTIMER (#21376) 2024-09-13 13:53:01 +02:00
Theo Arends 7b8308c36a Add support for I2C M5Unit (Mini)Scales using HX711 driver 2024-09-12 12:14:32 +02:00
Theo Arends d8f01ed4c0 Refactor HX711 memory use 2024-09-10 15:59:25 +02:00
Theo Arends 07eb51764a Update changelogs 2024-09-10 14:54:32 +02:00
Theo Arends 5675f00d70 Update changelogs 2024-09-10 14:12:31 +02:00
Theo Arends a75a58d591 Update changelogs 2024-09-09 16:39:27 +02:00
Theo Arends 1bf6a13d7c Bump version v14.2.0.4
- Add HX711 optional calibration precision option on command ``Sensor34 2 <weight in gram> <precision>`` where `<precision>` is 1 to 10 (#13983)
2024-09-08 17:32:35 +02:00
Theo Arends 4717d1986c Update changelogs 2024-09-07 16:32:39 +02:00
Theo Arends a44443f184 update changelogs 2024-08-26 17:29:20 +02:00
Theo Arends 1ad4a1377b Update changelogs 2024-08-26 13:56:20 +02:00
Theo Arends 831597e7d9 Version v14.2.0.3
- Add command ``SetOption69 1`` to enable Serial Bridge inverted Receive (#22000)
2024-08-23 11:22:26 +02:00
Theo Arends 4144f5c5ca Change GPIOViewer from v1.5.5 to v1.5.6 2024-08-22 18:03:39 +02:00
Theo Arends 798edc20c2 Version v14.2.0.2
- Changed Energy BL09xx command ``CurrentSet`` input changed from Ampere to milliAmpere
2024-08-21 16:27:43 +02:00
Theo Arends ab2d6c1169 Add Energy command ``PowerSet 60,230`` to calibrate both Current and Power with known resistive load of 60W at 230V using calibrated Voltage 2024-08-20 13:08:56 +02:00
Theo Arends c5b92d3ab1 Add Energy Log level 4 message when (Calculated) Apparent Power is less than Active Power indicating wrong calibration (#20653) 2024-08-19 22:31:56 +02:00
Theo Arends 652b9cef87 Fix PZEM continue energy monitoring when one phase fails (#21968) 2024-08-15 17:32:11 +02:00
Theo Arends bb0db6d8f8 Update changelogs 2024-08-15 15:12:59 +02:00
Theo Arends 30cffa1acc Bump version v14.2.0.1 2024-08-14 15:13:00 +02:00
Theo Arends b93e6cee7b Change GUI name of Analog<x> to ADC<x> 2024-08-13 15:11:51 +02:00
Theo Arends 8f75684cd7 Add Rule and Scripter xdrv sensor polling 2024-08-13 12:28:09 +02:00
Theo Arends 5bac2a2331 Revert "Add Rule and Scripter xdrv sensor polling"
This reverts commit cc2ea328d5.
2024-08-11 19:29:10 +02:00
Theo Arends cc2ea328d5 Add Rule and Scripter xdrv sensor polling 2024-08-11 17:47:01 +02:00
Theo Arends 6ffcc69e2d Update changelogs 2024-08-06 17:29:28 +02:00
Theo Arends c7faff7ac6 Refactored Analog driver to better support multiple channels
- Add command ``AdcGpio<gpio> <parameters>`` to better support ADC configuration
2024-08-03 17:52:47 +02:00
Theo Arends e5485288eb Update changelogs 2024-08-03 14:18:48 +02:00
Theo Arends 8f74a226e7 Update changelogs 2024-08-02 10:02:31 +02:00
Theo Arends 67fcb71c6d Update changelogs 2024-07-31 11:03:06 +02:00
Theo Arends 88293d7414 Analog GPIO changes
- Analog GPIO ``ADC Input`` with ``AdcParam<x> 1,<start_range>,<end_range>,<margin>,1`` provide direct light control
- Analog GPIO ``ADC Voltage`` with ``AdcParam<x> 11,<start_range>,<end_range>,<lowest_voltage>,<highest_voltage>`` provide energy monitoring with dc voltage
- Analog GPIO ``ADC Current`` with ``AdcParam<x> 12,<start_range>,<end_range>,<lowest_current>,<highest_current>`` provide energy monitoring with dc voltage
2024-07-28 18:52:38 +02:00
Theo Arends 87ec0cce21 Revert "Analog GPIO extensions"
This reverts commit 7c1cf6a81f.
2024-07-28 18:47:13 +02:00
Theo Arends 7c1cf6a81f Analog GPIO extensions
- Analog GPIO ``ADC Input`` with ``AdcParam<x> 1,<start_range>,<end_range>,1`` provide direct light control
- Analog GPIO ``ADC Voltage`` with ``AdcParam<x> 11,<start_range>,<end_range>,<lowest_voltage>,<highest_voltage>`` provide energy monitoring with dc voltage
- Analog GPIO ``ADC Current`` with ``AdcParam<x> 12,<start_range>,<end_range>,<lowest_current>,<highest_current>`` provide energy monitoring with dc voltage
2024-07-28 18:33:43 +02:00
Theo Arends 9f99633f43 update changelogs 2024-07-27 13:32:01 +02:00
Theo Arends f1a898c5ca Update changelogs 2024-07-26 14:12:08 +02:00
Theo Arends b9fcfa86c9 Update changelogs 2024-07-25 13:33:00 +02:00
Theo Arends 0784637f4f Update changelogs 2024-07-24 13:41:58 +02:00
Theo Arends f42e44a69d Support for Sonoff iFan04-H using template (#16402)
- Bump version v14.1.0.4
2024-07-22 15:35:20 +02:00
Theo Arends 85bff67d9b Add support for Wooliis Hall Effect Coulometer or Battery capacity monitor (#21732) 2024-07-17 14:14:44 +02:00
Theo Arends 8f6a0b15c3 Update changelogs 2024-07-14 13:54:09 +02:00
Theo Arends 105a08dd20 Skip MQTT response if command is prefixed with underscore (#21740) 2024-07-08 16:57:21 +02:00
Theo Arends 60d0c2208b update changelogs 2024-07-08 13:54:48 +02:00
Theo Arends fee5251bd4 Fix universal display power regression (#21726) 2024-07-05 15:30:31 +02:00
Theo Arends 363cd8d79e Update changelogs 2024-07-05 11:59:16 +02:00
Theo Arends dfa5b46494 Update changelogs 2024-07-04 16:18:53 +02:00
Theo Arends 59fc68026b Add Support for Sonoff POWCT Ring (#21131) 2024-07-03 16:31:43 +02:00
Theo Arends 344fdf94f7 Update changelogs 2024-07-02 10:19:59 +02:00
Theo Arends c8e29dafc6 Changed ESP32 TM1621 number overflow from "9999" to "12E3" (#21131) 2024-07-01 12:31:02 +02:00
Theo Arends 171d641092 Update changelogs 2024-06-30 15:38:40 +02:00
Theo Arends 3371fde11e Update changelogs 2024-06-28 09:56:55 +02:00
Theo Arends 178d42c286 Change ESP32 support for energy margin checks, like ``MaxPower2`` per phase (#21695)
- Add ESP32 support for power and energy limit checks, like ``MaxEnergy2`` per phase (#21695)
- Bump version v14.1.0.3
2024-06-27 16:50:45 +02:00
Theo Arends 20d0207890 Update changelogs 2024-06-27 13:30:15 +02:00
Theo Arends 33225bfabb Update changelogs 2024-06-25 22:58:46 +02:00
Theo Arends 25f17d7141 Update changelogs 2024-06-22 14:22:09 +02:00
Theo Arends 904fb01e75 Update changelogs 2024-06-22 14:12:48 +02:00
Theo Arends 3701a8cedc Update changelogs 2024-06-22 12:54:08 +02:00
Theo Arends 94aded8d5c Update changelogs 2024-06-15 13:59:17 +02:00
Theo Arends 0c49262d54 Update changelogs 2024-06-14 22:40:27 +02:00
Theo Arends 75c47b6948 Extend command ``SetOption147 1`` to disable publish of IRReceived MQTT messages (#21574) 2024-06-14 11:23:03 +02:00
Theo Arends 9451f20b43 Update changelogs 2024-06-14 10:46:14 +02:00
Theo Arends 6e8e3cc740 Update changelogs 2024-06-12 10:54:17 +02:00
Theo Arends 87148ae0c1 Change SerialBridge command ``SSerialSend9`` replaced by ``SSerialMode``
- Bump version v14.1.0.2
2024-06-11 17:27:39 +02:00
Theo Arends 4858ec0aef Allow receive or send using SerialBridge 2024-06-11 12:41:19 +02:00
Theo Arends 0471ba24c1 Add support for QMP6988 temperature and pressure sensor 2024-06-10 16:05:25 +02:00