Commit Graph

8856 Commits

Author SHA1 Message Date
Theo Arends 4e361538bc Merge branch 'development' of https://github.com/arendst/Tasmota into development 2024-01-06 21:34:19 +01:00
Theo Arends cee219a55f Minor fixes 2024-01-06 21:34:15 +01:00
s-hadinger 324689ee53
Berry `gpio.read_pwm` and `gpio.read_pwm_resolution` (#20414) 2024-01-06 21:22:45 +01:00
Theo Arends 2f184b394f Add GPIO Viewer to see realtime GPIO states. Enable with define USE_GPIO_VIEWER 2024-01-06 17:54:23 +01:00
s-hadinger ea6b191378
Berry add `tasmota.urlbecload(url:string) -> bool` (#20412) 2024-01-06 17:32:50 +01:00
s-hadinger 15b40801d4
Fixes for tcpasync (#20411) 2024-01-06 17:03:51 +01:00
s-hadinger af2b90caac
Berry add support for `tcpclientasync` in `tcpserver` (#20401) 2024-01-05 09:54:18 +01:00
Theo Arends 0ed01c3b1d Revert "Add ESP32 experimental support GPIOViewer when ``define USE_ESP32_GPIO_VIEWER`` is enabled"
This reverts commit 9d27f395d8.
2024-01-04 22:50:41 +01:00
Theo Arends 9d27f395d8 Add ESP32 experimental support GPIOViewer when ``define USE_ESP32_GPIO_VIEWER`` is enabled 2024-01-04 18:28:37 +01:00
Theo Arends 03aea58a4c Bump version v13.2.0.2 2024-01-02 14:29:23 +01:00
s-hadinger 54e88c2926
HASPmota type `chart` (#20372) 2024-01-02 12:16:50 +01:00
gemu 9194ac6c94
max variables > 256 (#20358) 2023-12-30 13:20:33 +01:00
David Gwynne de0c39582f
don't send commands to the AC while reading data from the AC. (#20352)
on some units it can take around 250ms to reply to a request, by which
time we're shoving another command to the unit. if this happens, the
unit gives up and starts replying to the new command, which can again
take 250ms. in this situation effectively nothing gets through.

avoid this by checking if we're in the parser state machine. this also
gives us timeout handling.

tested on 4 different AC units. one which was unusable before is now
functioning as expected, and the other 3 appear just as functional as
they were before.
2023-12-30 09:14:56 +01:00
s-hadinger a0f6b7f1a3
Relax checks of Partition Wizard for newest Shelly (#20349) 2023-12-29 23:10:26 +01:00
Theo Arends 4393327bb9 Add support negative power on BL0942 using index 5..8 (#20322) 2023-12-29 22:54:32 +01:00
s-hadinger 1f662a6dad
HASPmota added `haspmota.page_show()` to change page (#20333) 2023-12-28 22:19:58 +01:00
Theo Arends 6d94d9e766 Cleanup 2023-12-28 17:53:21 +01:00
Theo Arends d5a4f8441b Fix Berry claiming UART0 if needed (#20324) 2023-12-28 17:25:01 +01:00
Jason2866 21de682f58
Fix compile (#20329) 2023-12-28 13:48:27 +01:00
Theo Arends 21c7edcb50 Add display of active drivers using command ``status 4`` 2023-12-27 22:03:56 +01:00
Theo Arends 13a9c3b5b2 Add delays to wifi init code
Add delays to wifi init code to fix some edge power cases.
2023-12-27 17:29:03 +01:00
hk2k2 84fb3879c7
Update xdsp_15_tm1637.ino (#20317)
Displaydimmer command has not worked correctly on 2 daisy-Chained MAX7219 7-Segment Displays.
Only the first Module (8 Segments) changed their brightness.
2023-12-27 09:27:16 +01:00
Theo Arends c744612a29 Fix scripter buffer overflow (#20303) 2023-12-26 14:22:47 +01:00
smhc b7b83eaaaa
Only reduce sleep for lights if necessary (#20146)
Co-authored-by: Shane Hird <shane@email.com>
2023-12-26 12:41:55 +01:00
Theo Arends 77a58a3642 Fix domoticz topic edge case 2023-12-25 14:18:59 +01:00
DUPONCHEEL Sébastien d39896f6a2
HDMI CEC: Allow TV device type emulation. (#20310)
The previous check set device type default when HDMIType was set to CEC_Device::CDT_TV.
2023-12-25 12:42:20 +01:00
s-hadinger 2808653ad9
Moved Berry animate to its own `berry_animate` lib (#20309)
* Moved Berry animate to its own `berry_animate` lib

* Fix solidification

* fix compilation

* Fix compilation
2023-12-25 11:01:19 +01:00
UBWH bebffa040f
Update xdrv_58_range_extender.ino (#20295)
RESULT to RgxSSId command is not valid JSON

BEFORE:
RSL: RESULT = {"Rgx":{"Valid":"true","SSId":"solar_5BDBFC","Password":"MyPassword","IPAddress":"192.168.99.1","Subnetmask":"255.255.255.0"}

AFTER
RSL: RESULT = {"Rgx":{"Valid":"true","SSId":"solar_5BDBFC","Password":"MyPassword","IPAddress":"192.168.99.1","Subnetmask":"255.255.255.0"}}

Not extra terminating '}'
2023-12-25 09:13:32 +01:00
DUPONCHEEL Sébastien c13886e00d
HDMI CEC: Fix HDMIType command (#20308)
According to documentation HDMIType is from 0 to 5 but the actual check is lower than 1 and above or equal 6, so the function is never applied. Also note that setting the HDMIType to 0 use the default type value 4, that make impossible the emulation of a TV device.
2023-12-25 08:54:53 +01:00
Theo Arends a6a8214ea7 Fix support for Domoticz floor/room topics
Fix support for Domoticz floor/room topics. Regression from v12.0.1 (#20299)
2023-12-23 16:13:13 +01:00
s-hadinger fbc827d11d
Berry fix leds brightness (#20292) 2023-12-22 18:10:34 +01:00
lis0r 4ac93a4d1a
Add support for SJWS01LM BLE flooding sensor (#20288) 2023-12-22 15:31:14 +01:00
Bernhard Urban-Forster 5988e77f8c
as608: send mqtt message on non-matching finger (#20287) 2023-12-22 14:21:59 +01:00
Christian Baars 0e87096bad
allow Berry fast_loop for BLE module (#20281) 2023-12-21 20:28:08 +01:00
Theo Arends e5abd47c86 More syslog explaining 2023-12-21 14:49:37 +01:00
Theo Arends 2f824b1976 Document different syslog layouts 2023-12-21 14:30:49 +01:00
Theo Arends a445c7f23a Fix syslog server warning
Fix syslog server warning caused by lack of <PRI> field and hostname starting with 'z' (#14689)
2023-12-20 16:00:27 +01:00
Marcus Better 04a8414217
Fix Tuya v2 module compilation (#20272) 2023-12-20 10:00:52 +01:00
Theo Arends 9e2ae391fc Fix ESP32 piezo ceramic buzzer
Fix ESP32 piezo ceramic buzzer doesn't buzz (#20118)
2023-12-19 15:38:12 +01:00
Theo Arends b81eaf5bc8 Support syslog updates every sleep
Support syslog updates every sleep or every second if `#define SYSLOG_UPDATE_SECOND` (#20260)
2023-12-19 12:45:13 +01:00
budulinek 23b4cd08d4
Realtime syslog (#20260)
* Realtime Syslog

* Update tasmota.ino

---------

Co-authored-by: Theo Arends <11044339+arendst@users.noreply.github.com>
2023-12-19 12:29:39 +01:00
SteWers 81f90a251c
de_DE Fixes and typos (#20269)
* de_DE Fixes and typos

* Hyphen
2023-12-19 09:37:02 +01:00
Jason2866 d2690ef7c0
enable CST816S touch driver in firmware lvgl (#20264) 2023-12-18 14:02:00 +01:00
Theo Arends f65ae0694b Fix XSS phase 1 2023-12-18 12:31:14 +01:00
Norbert Richter c111bb963f
Add NeoPool hydrolysis FL1 and Redox flag (#20258) 2023-12-18 11:27:12 +01:00
Arne Meeuw 6b35fc8ddb
Add support for CST816S touch interface (#20213)
* Add initial version (prints coordinates)

* Add CST816S_found

* Revert formatting

* Add supported gestures (untested)

* Correct use of enums

* Remove library dependency

* Unification of methods

* Remove redundant variables and format
2023-12-18 11:03:18 +01:00
SteWers 2204ecdc51
Unify de_DE (#20257)
* Unify de_DE

Make de_DE more unify

* Update de_DE.h
2023-12-18 10:17:39 +01:00
bovirus d3a30681b2
Update Italian language (#20255) 2023-12-17 21:13:07 +01:00
s-hadinger dc98f6e190
Simplify animate (#20254)
* Simplify animate

* make add_ methods idempotent
2023-12-17 20:47:18 +01:00
Barbudor 7c290388d9
Sonoff Basic R4 Magic switch (#20247)
* magic switch take 1

* good to go

* good to go

* final, including in tasmota32c3
2023-12-16 18:23:51 +01:00
s-hadinger 3f4b69f91c
Improve animation (#20246) 2023-12-16 17:26:58 +01:00
Norbert Richter d10b30ef55
Update NeoPool register desc (#20245) 2023-12-16 14:40:18 +01:00
s-hadinger d6bf19190f
Small fixes to animate module (#20238) 2023-12-14 23:09:40 +01:00
s-hadinger c1f8ee5dbb
Refactoring of Berry `animate` module for WS2812 Leds (#20236) 2023-12-14 20:13:17 +01:00
Theo Arends 512d659d67 Bump version to v13.3.0.1 2023-12-12 16:20:06 +01:00
s-hadinger f796915fd1
HASPmota `bar` fixed `val` attribute (#20208) 2023-12-11 22:13:24 +01:00
s-hadinger f7cf94b929
Remove Berry `every_200ms` event which didn't work anyways (#20205) 2023-12-11 21:22:20 +01:00
Christian Baars 864a99d887
Berry ULP - API changes for IDF5.x (#20198)
* remove pointless dependencies

* add API changes for IDF5.x
2023-12-09 13:32:02 +01:00
s-hadinger d61adb0b0c
Leds animation refactoring stage 1 (#20197) 2023-12-08 21:13:44 +01:00
Barbudor 73268e4bb6
Fix TUYA state machine (in TUYA v1) (#20110)
* rework state machine

* some comments

* wip

* looks good now

* little updates
2023-12-08 20:33:40 +01:00
stefanbode f19d15654c
Restart 9 support deepsleep with TIMER based wakeup (#20165)
* Allow restart 9 to use TIMERS for wakeup

* support for restart 9

allow restart 9 to use any defined TIMER to restart a a specific time.
2023-12-05 13:47:53 +01:00
Theo Arends 728f91b602 Update changelogs 2023-12-05 10:07:02 +01:00
Theo Arends e00d5ff914 Update comments 2023-12-04 12:08:57 +01:00
Theo Arends 14793c2594 Shorten code and add more comments 2023-12-04 11:44:59 +01:00
Theo Arends 7a6cca6d20 Add command ``WebCanvas``
Add command ``WebCanvas linear-gradient(#FF0018 7%,#FFA52C,#FFFF41,#008018,#0000F9,#86007D 93%)`` to set GUI canvas
2023-12-03 15:52:44 +01:00
Theo Arends 70a082c8e5 ESP32 show colorful background if ``WebColor2`` bit0 is not set. Bit0 is default set using #252525 2023-12-03 11:59:16 +01:00
SteWers b4a54ae880
[Thermostat] Simplify code (#20141)
* [Thermostat] Simplify code

Simplify code of PR #20133

* [Thermostat] small code changes

- removed unused const
- replaced constant value
2023-12-03 08:08:24 +01:00
Theo Arends 28c8f8cf47 Fix PowerOnState on ESP32 (#20144) 2023-12-02 17:49:02 +01:00
Theo Arends 050fdbf5de Important fix 2023-12-02 17:04:43 +01:00
Theo Arends b7819bcfac ESP32 show LHBT background if ``WebColor2`` bit0 is not set. Bit0 is default set using #252525 2023-12-02 16:59:04 +01:00
vtHydroponics 3d0ab2259c
Sensor57 TSL2591 Light Sensor Commands (#20039)
* Changes from 11/12/2023. Switches made, need debug

* Finalized gain/integration adjustment trees

* Fixed the bugs

* Outputs in JSON, hex displays as hex was decimal
2023-12-02 12:35:56 +01:00
stefanbode 45ba50bb2f
scripter compile error fix (#20140)
compile error if rules are disabled fixed
2023-12-01 17:14:09 +01:00
Christian Baars 8ee071b8b8
build process: simplify driver selection for BLE (#20138)
Co-authored-by: Radio Loge <radiologe@MacBook-Pro-von-Radio.local>
2023-12-01 14:59:59 +01:00
Theo Arends 5b13ece33e Bump version to v13.2.0.3 2023-12-01 14:10:13 +01:00
Christian Baars 673202120f
instantiate correct class Rainbow_stripes (#20135) 2023-12-01 10:52:00 +01:00
stegerfa a9a734ddba
fixed possible char array overflow (#20133)
* fixed possible char array overflow

the temporary char arrays size was fixed to 4 bytes before.
snprintf was set for the second char, so maximum size must be limited to 4-1, instead of 4 bytes.
to avoid further mistakes usage of a #define
(assuming that flaw made never problems as the number of attached sensors was usually <99)

* fixed possible char array overflow, optimization of preprocessor-constant name

instead using shortname TEMPLEN for the preprocessor-constant using a name specific to the thermostat-function to avoid interference with the rest of the project

* fixed possible char array overflow, no preprocessor constant neccessary

fixed possible char array overflow, without using preprocessor constant
2023-12-01 09:14:42 +01:00
stefanbode 9a010bdf7d
fix on undef TIMERS (#20123)
fix compilation error
2023-11-30 08:54:08 +01:00
stefanbode 47bc321ebb
Fix compile issue with rules and startup procedure of deepsleep (#20122)
* Fix compile issue with rules and startup procedure of deepsleep

* fix

* fix inc with old functionality

fix a side effect with the old behavior
2023-11-29 15:36:43 +01:00
stefanbode d0f47efae5
Integrate TIMERS into Deepsleep (#20117)
* Integrate Timers into Deepsleep

Added new functionality to controll the Deepsleep Wakeup process with TIMERS.

* added 60sec initial runtime
2023-11-28 11:38:46 +01:00
Christian Baars fb51d9df8a
MI32 GUI changes (#20115) 2023-11-27 19:08:44 +01:00
Theo Arends 62afe918f0 Add webquery message when empty response 2023-11-27 15:59:27 +01:00
Theo Arends 07031d5ebf Fix ``WebQuery`` response buffer corruption and format character ``%`` (#20111) 2023-11-27 15:22:30 +01:00
Barbudor 3273aaa9f9
Fix ESP32 webquery response (#20111)
* logging webreponse

* to test

* final

* simple
2023-11-27 12:38:52 +01:00
Theo Arends 22f50abf22 Fix compile error 2023-11-24 17:20:21 +01:00
Theo Arends 01e51b2c9d Fix undocumented use of Energy struct 2023-11-24 16:49:51 +01:00
Theo Arends 2cee622af8 ESP32 remove restart energy logging if no energy monitoring is selected 2023-11-24 16:36:41 +01:00
Theo Arends ad831418e5 Fix SO51 2023-11-24 11:36:20 +01:00
Steve 3568b559e4
Add Support for Avago Tech Bluetooth Buttons (#20088) 2023-11-23 12:00:34 +01:00
s-hadinger 1c60527099
Berry `scale_int`, equivalent of `scale_uint` for signed integers (#20090) 2023-11-23 11:31:26 +01:00
s-hadinger 1cd13d7f66
Fixed `changeUIntScale` for linearity when expanding range (#20089) 2023-11-23 10:57:47 +01:00
papax333 77081ad92b
corrected ebus crc check (#20081) 2023-11-22 11:57:10 +01:00
Daniel Kucera 7e2fbdea55
tuyamcu: allow sending arbitrary commands (#20077) 2023-11-22 11:37:01 +01:00
Theo Arends 433d69d4bc Fix serial resource checks
Fix serial resource checks (#20053)
2023-11-20 12:35:06 +01:00
gemu 7d30ab5929
support for kamstrup heat meters (#20057) 2023-11-20 09:05:54 +01:00
SteWers f4ad7586bb
Multilingual fixes (#20064)
* Multilingual fixes

Some fixes for a better user experience matching every language.

* Revert frag mem

Solved problem with regional decimal conversion in language file.
2023-11-20 09:05:40 +01:00
bovirus 1e7c2a9dd2
Update Italian language (#20050) 2023-11-18 14:20:45 +01:00
Theo Arends 74aa056650 Final fix ESP32C3 relay toggle
Final fix ESP32C3 relay toggle on restart (#20030)
2023-11-17 16:17:29 +01:00
Theo Arends 5297bab041 Revert "Final fix ESP32C3 relay toggle"
This reverts commit 4489dba8dd.
2023-11-17 16:06:45 +01:00
Theo Arends 4489dba8dd Final fix ESP32C3 relay toggle
Final fix ESP32C3 relay toggle on restart (#20030)
2023-11-17 15:43:42 +01:00
Theo Arends b02a66a1b6 Fix ESP32C3 relay toggle on restart
Fix ESP32C3 relay toggle on restart (#20030)
2023-11-17 13:02:19 +01:00
SteWers 040e25a92c
Label of upload button (#20036)
As the label of the upload button is concatenated at runtime, this does not match in all languages. To solve this, there is now a full label text for `Start upgrade` and `Start restore`.
2023-11-17 10:35:29 +01:00
Theo Arends f0162377e2 Fix ESP32-C3 gpio hold
Fix ESP32-C3 gpio hold on non-relay gpios (#20030)
2023-11-16 10:26:21 +01:00
SteWers c3674bd08f
Enhance de_DE.h (#20027)
* Enhance de_DE.h

* Update de_DE.h
2023-11-16 10:17:58 +01:00
s-hadinger bc8dd8894e
Fix compilation for Audio Core3 ESP32C3 (#20023) 2023-11-14 22:20:26 +01:00
stefanbode dd9e2a7409
regression of MAX_SHUTTERS for stepper motors (#20019)
maximize on 4 stepper shutters due to limits in number of counter
2023-11-14 17:54:01 +01:00
Jason2866 7abf8c469b
Align arduino3 firmware build to Tasmota32 (#20015)
* step1 of phase out Arduino30 firmware variant

* rm duplicate Matter define
2023-11-14 17:02:00 +01:00
Jason2866 58f50045d9
Add the possibility to set global compile time settings (#20013) 2023-11-14 16:36:09 +01:00
SteWers 52a0d5b365
[Thermostat] Fix JSON index (#20011)
* [Thermostat] Fix JSON index

* Fix index in debug log
2023-11-14 10:00:55 +01:00
Christian Baars 0b54b7df40
fix compilation without PARTITION_WIZARD (#20009) 2023-11-14 08:52:09 +01:00
Theo Arends 7e384ebff8 Add image name to GUI footer 2023-11-13 14:41:49 +01:00
Theo Arends c1fa07dd51 Fix ESP32C3 ledlink 2023-11-13 10:54:25 +01:00
SteWers 84249ca32f
Update de_DE.h (#19995) 2023-11-13 10:32:39 +01:00
bovirus fa34338476
Update Italian language (#20002) 2023-11-13 10:31:37 +01:00
s-hadinger 65e07e8387
Fix Berry `gpio.dac_voltage()` broken in 13.2.0 (#19997) 2023-11-12 22:17:17 +01:00
Jason2866 44ef425b89
disable warning only for specific compiler version (#19994) 2023-11-12 19:01:41 +01:00
SteWers 64f0520b23
[Thermostat] Change to language files (#19982)
* [Thermostat] Change to language files

* [Thermostat] Gradient display

Enhance display of gradient temperature
2023-11-12 11:26:45 +01:00
s-hadinger de1b5929b8
Partition Wizard can be loaded dynamically (#19980)
* Partition Wizard can be loaded dynamically

* Centralize config

* Don't display duplicate buttons

* Fix test
2023-11-11 23:52:41 +01:00
Norbert Richter c88b773dd3
Neopool enhancements (#19973)
* Add NeoPool sensor delta trigger

* Add NeoPool store settings in unified file system

* Add NeoPool command NPBoost
2023-11-11 11:49:40 +01:00
Theo Arends 098e29d7e0 Update support_esp32.ino 2023-11-10 12:42:13 +01:00
Theo Arends ede5e398a6 Refactor hardware specific code 2023-11-10 12:24:20 +01:00
Theo Arends 7febc11b8c Fix C2/C6 exception 2023-11-10 11:20:41 +01:00
Theo Arends 211da12342 Update feature list 2023-11-09 15:32:43 +01:00
Theo Arends c6ca0ff10f Squeeze some bytes out of it 2023-11-09 14:59:31 +01:00
Christian Baars cf6de0ce31
add AES_CBC to crypto module (#19964) 2023-11-09 14:27:17 +01:00
Theo Arends 9b5945a117 Add feature10 bitmap 2023-11-09 14:25:24 +01:00
Christian Baars 06bacdf48b
refactoring, use ringbuffer for server too (#19953) 2023-11-07 20:27:43 +01:00
gemu 1e4f069c3f
can bus read and write support, esp32 native twai (#19934) 2023-11-07 16:15:14 +01:00
s-hadinger 9cfe78a8a0
Audio refactoring of DAC (#19939) 2023-11-06 08:52:11 +01:00
s-hadinger 3207d542c1
Fix Zero-Cross Dimmer for ESP32 with Core3 (#19929)
* Fix Zero-Cross Dimmer for ESP32 with Core3

* Remove left-over

* Fix esp8266
2023-11-04 19:19:48 +01:00
Norbert Richter 5d4330611a
Add NeoPool NPHydrolysis percent and unit (#19924) 2023-11-04 15:42:01 +01:00
Jason2866 361c15d63b
Delete homekit.c (#19923) 2023-11-04 13:05:48 +01:00
s-hadinger fbe31ab294
Fix Core3 warnings when compiling LVGL (#19921) 2023-11-04 12:22:44 +01:00
s-hadinger 46df036b51
Cosmetic changes (#19920) 2023-11-04 11:46:25 +01:00
protectivedad 11e9b7375d
The webserver for the esp32-cam stream doesn't get started automatically. (#19905)
This ensures that it does start when the WcStream (or WcInterrupt) are run.

Co-authored-by: Anthony Sepa <protectivedad@gmail.com>
2023-11-03 16:02:42 +01:00
stefanbode b83516970f
fix #19911 tilt position is not restored with command: shutterposition 0,-45 (#19916)
* fix shutterposition 0,-45 does not keep tilt

allow , on different config settings

* fix shutterposition 0,-45 does not maintain tilt

allow , on different config settings.
2023-11-03 16:01:57 +01:00
Theo Arends f78c195945 Update changelogs - Bump version v13.2.0.2 2023-11-03 14:20:36 +01:00
gemu 2d05bd2597
add tcp client, fix timer issue (#19914) 2023-11-03 10:39:18 +01:00
s-hadinger 217c568301
HASPmota add styling properties (#19912) 2023-11-02 22:11:48 +01:00
Theo Arends 63297ec5c9 Start using constexpr in featurelist
Saves 128 bytes.
2023-11-02 17:44:29 +01:00
Christian Baars 580c46177f
MI32: fix restart on C6 (#19909) 2023-11-02 13:55:15 +01:00
Jason2866 6a86576dac
add MI env (#19902)
* rename odroid ard3 env to tasmota32-psramfix_ard3
* add inbuilt JTAG debugger
* rm Homekit leftovers
* add MI env
2023-11-02 12:03:14 +01:00
Jason2866 3da80e9144
Enable IR Remote (#19908) 2023-11-02 11:33:07 +01:00
Christian Baars c238d8d4d1
several updates (#19893) 2023-11-01 17:30:22 +01:00
stefanbode 2e95f45458
continuous improvement (#19897)
- servo fix on movement during operation. position did not behave as expected if position change before stop
- enhanced minimum change on stepper shutter depending on motordelay
2023-11-01 14:15:52 +01:00
Barbudor f9717ceb7f
fix compile USE_PID (#19890) 2023-10-31 20:42:42 +01:00
stefanbode 24927f17c9
enhancement servo shutter (#19888)
allow on servo also very small changes of position. need to do similar with steppers later
2023-10-31 20:41:41 +01:00
Theo Arends 6410e72b6c Add max size 2023-10-30 21:52:58 +01:00
Theo Arends 09f473b734 A future proof solution ;-) 2023-10-30 21:47:49 +01:00
Jason2866 b0d5cffe16
Add flash mode `OPI` to Tasmota info page (#19881)
* add OPI mode to info page
2023-10-30 18:27:25 +01:00
Theo Arends 444f4fcd62 Fix ESP32 32MB program flash size 2023-10-30 15:29:01 +01:00
stefanbode 8540ee37fc
fix on servo and ESp32 (#19878)
servo did not react same on ESP32 than ESP8266. Changed to TASMOTA pwmapply  capabilities
2023-10-30 14:48:32 +01:00
anishsane be94a6cac8
Fix for CmndHDMIAddr function. (#19866)
* Fix for CmndHDMIAddr function.
1. Typical values for XdrvMailbox.payload are 0x1000...0x4000. Hence the
   check should be (value > 0).
2. Don't overwrite the user supplied value with value read from the hardware.

* Correct the condition in CEC_Device::OnReady.
We should check for _on_ready_cb before calling _on_ready_cb.
2023-10-29 17:14:44 +01:00
Alexander Nagy b3b0ffd6b0
Adding display.ini for 1.44 inch 128x128 red SPI display (#19862) 2023-10-29 13:16:32 +01:00
Theo Arends 26f14caee9 Fix S2 core3 compiles 2023-10-28 16:20:44 +02:00
Norbert Richter b65f32c5f3
Neopool enhancements for HA (#19857)
* Add NeoPool hydrolysis setpoint and max

* Add NeoPool command ``NPFiltrationSpeed``

* Change NeoPool topic ``Power`` to ``Powerunit``

* Add ``SO157`` for NeoPool output sensitive data
2023-10-28 14:07:49 +02:00
Jason2866 75ec9da8a2
Refactoring of storing safeboot bin (#19858)
* Folder for storing safeboot is now configurable
* Platform 2023.10.06
* Platform 2023.10.12
2023-10-28 13:15:31 +02:00
FransOv 0130ce972a
Support of Winsum ZH03B sensor Dust particle sensor in xsns_18_pms5003.ino (#19850)
* Update xsns_18_pms5003.ino

The Winsum ZH03B sensor is quite similar to the Plantower PMS3003 sensor. The main difference is the response in passive mode. With these changes xsns_18_pms5003.ino can support the ZH03B sensor when PMS_MODEL_ZH03X is defined in the configuration file.

* Update xsns_18_pms5003.ino
2023-10-27 17:34:49 +02:00
Theo Arends 84eaae572c Fix core 3 S2 USB 2023-10-24 17:00:11 +02:00
Theo Arends 5c395ffc06 Fix core 3 S2 USB 2023-10-24 16:41:36 +02:00
Theo Arends 84ced0fcab Add ESP32 core v3 auto TasConsole USB or Serial connection by @staars 2023-10-24 16:32:39 +02:00
Barbudor 1d5f55d374
increase MAX_HUE_DEVICES to 32 (#19820) 2023-10-23 09:36:39 +02:00
s-hadinger 4f9c7ada04
Fix audio Arduino 3 (#19819) 2023-10-22 21:30:36 +02:00
Theo Arends 0ae793a8d4 Save some bytes 2023-10-21 17:37:31 +02:00
Theo Arends 57860b692d Fix GpioRead (#19810) 2023-10-21 17:20:55 +02:00
s-hadinger 356de1a16a
Add command ``GpioRead`` (#19814)
* Add command ``GpioRead``

* change output
2023-10-21 15:56:40 +02:00
Theo Arends 6efe2ab514 Add I2C bus2 support to LM75AD temperature sensor 2023-10-21 15:42:32 +02:00
Theo Arends bec0c27750 Add I2C bus2 support to SI1145/6/7 Ultra violet index and light sensor 2023-10-21 15:31:54 +02:00
Theo Arends bd90363565 Update changelogs 2023-10-21 14:48:12 +02:00
Theo Arends c91882daeb Add ADS1115 I2C bus2 support 2023-10-20 17:39:00 +02:00
Theo Arends 7238d857e9 Add SHT3x I2C bus2 support 2023-10-20 14:52:21 +02:00
Theo Arends f05470bf81 Add HYT I2c bus2 support 2023-10-20 13:35:24 +02:00
Norbert Richter 1f8cd6a259
Fix NeoPool filtration mode display (#19801) 2023-10-19 18:01:56 +02:00
Theo Arends e3253fea8f Add I2C bus2 support to BH1750 2023-10-19 18:01:12 +02:00
Theo Arends b39adacc41 Fix HTU21 bus number 2023-10-19 17:44:59 +02:00
Theo Arends 49709807c7 Add I2C bus2 support to HTU temperature sensor 2023-10-19 17:37:19 +02:00
Theo Arends b6811b2f4e Prep ESP32 I2C bus2 support 2023-10-19 16:59:53 +02:00
Theo Arends 70287d90ad Bump v13.2.0.1 2023-10-19 11:45:12 +02:00
stefanbode d5f506b1e3
reverted back some function and fix frequency storage (#19791)
* optimize disc write delay during shutter movement

changed to dynamic write delay to ensure no disc write on multiple shutter movement with stepper shutters.

* optimize disc write delay

ensure disc write will be postponed until all shutters stopped

* reverted back to simple version

* removed duplicate obsolete compiler options
2023-10-18 23:41:52 +02:00
Theo Arends 58324da242 Final fix ;-) (#19763) 2023-10-18 16:19:13 +02:00
Theo Arends 1fa036f176 Fix unsorted DS18Alias (#19763) 2023-10-18 16:12:02 +02:00
Theo Arends 13c6bc91cc Fix empty name if no DSAlias defined (#19763) 2023-10-18 15:15:49 +02:00
stefanbode 2daaa367ff
stepper shutter channel fix (#19784) 2023-10-18 11:29:35 +02:00
Christian Baars 17143cea44
remove HomeKit remnants from mi32 legacy driver (#19782) 2023-10-17 21:00:46 +02:00
sfromis ab420b6cc1
DS18x20_USE_ID_AS_NAME in my_user_config.h (#19777)
Add mention of #define DS18x20_USE_ID_AS_NAME
2023-10-17 11:00:39 +02:00
Christian Baars b98ad59d11
Delete xsns_62_esp32_mi_homekit.c (#19778) 2023-10-17 11:00:02 +02:00
s-hadinger 82858616f6
Zigbee fix timezone when device reads LocalTime attribute (#19772) 2023-10-17 09:02:14 +02:00
Barbudor 8e9299ec97
fix mis-order (#19769)
* fix mis-order

* fix mis-order on esp32 too
2023-10-16 21:47:31 +02:00
bovirus 5a9da83997
Update Italian language (#19754) 2023-10-16 16:07:37 +02:00
s-hadinger 367768b00e
Re-enable features for Arduino 3 (#19761) 2023-10-16 12:44:05 +02:00
Norbert a04995a3f4
Update xdrv_63_modbus_bridge.ino, brackets not needed. (#19759) 2023-10-16 09:42:55 +02:00
JeroenSt 91ba05ac3b
ModbusBridge write memleak fix (19733) (#19758)
Co-authored-by: JeroenSt <nospam@nospam.org>
2023-10-16 08:26:26 +02:00
s-hadinger 8467b41290
Teleinfo use Apparent Power as Active Power approximation (#19756) 2023-10-16 08:20:07 +02:00
s-hadinger d3784a26ab
Audio Core3 compilation for ESP32C3 (#19755) 2023-10-15 22:46:01 +02:00
stefanbode 124fbf8dcb
fix shutterfrequency change on mutiple channels (#19737)
* fix shutterfrequency change on mutiple channels

* LEDC channel management for stepper shutter

LEDC channels dynamically assigned to ensure up to 16 shutters can be defined. Number of simultaneous moving shutters is limited by number of LEDC channels.

* bugfix  >=
2023-10-15 18:40:26 +02:00
Jason2866 56314e5423
Update de_DE.h 2023-10-15 14:51:11 +02:00
Saentist 715b64dc28
RU Translation fix (#19746) 2023-10-15 11:57:53 +02:00
Eduardo Spremolla b63a061aeb
Update xsns_02_analog.ino for calibrated values on ESP32 (#19732)
ESP32  ADC has variables errors, but calibrations values are put in eFuses at factory test.
analogReadMilliVolts() from api correct the ADC reading with tata values.
Since now the value are mV and not ADC numbers, the fast solution is to revert it back to ADC numbers:
divide by Vcc  => ANALOG_V33*1000  and multiply by ANALOG_RANGE
Other way is to modify all sensor cases to account for the different unit.
2023-10-15 11:57:13 +02:00
s-hadinger 16307bc4b8
More audio refactoring for core3 (#19749) 2023-10-15 11:22:20 +02:00
bovirus 67deceeba8
Update Italian language (#19730) 2023-10-13 17:50:06 +02:00
Jason2866 2950de0016
rm WifiClientSecure 2023-10-13 16:57:01 +02:00
Theo Arends 0984c01828 Update changelogs 2023-10-13 14:50:51 +02:00
Theo Arends 5cee525d02 Add Active Power Total
Add Active Power Total if multiple phases AND both positive and negative values (#19141)
2023-10-13 13:56:04 +02:00
chefpro 32cbd330aa
Add Rescan and RetryRead to onewire scan for bulletproove onewire (#19700)
Co-authored-by: Peter Rustler <peter@rustlerit.de>
2023-10-13 11:29:19 +02:00
nusse f245821828
HC8 sensor support (#19714)
* HC8 sensor support

* HC8: fix json

* HC8: missing languages

* HC8: move macros to proper locations

---------

Co-authored-by: Daniel Maier <daniel.maier@tu-berlin.de>
2023-10-13 11:28:41 +02:00
Jason2866 a3dcbc6661
Remove `WiFiClientSecure` (#19725)
* Update HttpClientLight.cpp
* Update HttpClientLight.h
* Update Powerwall.h
* Update xdrv_10_scripter.ino
2023-10-12 20:10:16 +02:00
bovirus 4eefed79ac
Update Italian language (#19712) 2023-10-11 17:12:25 +02:00
stefanbode dade00bf59
Fix shutterfrequency esp32 (#19717) 2023-10-11 17:12:07 +02:00
Paul Blacknell 663e6ab21b
Update xsns_110_max17043.ino (#19709) 2023-10-09 16:52:56 +02:00
Paul Blacknell f41e525f5a
fix: account for MAX17043 alert status on start (#19708) 2023-10-09 16:14:41 +02:00
Theo Arends 39e0cf574d Refactor AP1 information 2023-10-09 11:33:24 +02:00
tyler.li a1cce95c08
MAX31855/MAX6675 sensors driver support up to 6 (#19704)
* Support multiple MAX31855/MAX6675 sensor up to 6

* code format

* revert tasmota_template_legacy.h

* revert original variable names

* revert original variable names

---------

Co-authored-by: arendst <mhtarends@gmail.com>
Co-authored-by: litao07 <litao07@kuaishou.com>
2023-10-09 10:44:24 +02:00
SteWers 6bec09b23f
[WebUI] WiFi Information (#19705)
* [WebUI] WiFi Information

Structured and more infos on WebUI Information page

* [WebUI] WiFi Info multiple lines

Divide one long line into multiple short lines
2023-10-09 08:39:12 +02:00
chefpro 9fbb4a8b0b
Fix modbus receive handling for float types (#19697)
Co-authored-by: Peter Rustler <peter@rustlerit.de>
2023-10-08 13:14:53 +02:00
s-hadinger 8c6788c6bc
Audio exclusive mode (#19698) 2023-10-07 22:11:37 +02:00
s-hadinger bf9c5b86c6
Remove warnings when compiling Audio with Arduino 3 (#19687) 2023-10-06 19:47:10 +02:00
Theo Arends 74bcbd898e Fix compilation when webserver disabled 2023-10-06 12:17:37 +02:00
Theo Arends 21ac018d70 Fix compile error 2023-10-06 11:23:58 +02:00
Matteo Albinola 2302d38eb0
Windmeter: add measure interval setting (#19542)
* Add new setting windmeter_measure_intvl and update speed computation

* Ensure windmeter_measure_intvl is not below 1

* Keep same settings order in response messages and add better comments
2023-10-06 10:53:38 +02:00
s-hadinger c5c78f45d0
Fix audio_slm.be 2023-10-06 08:11:29 +02:00
s-hadinger 11aad19800
Audio support for Microphone + Berry (#19677) 2023-10-05 21:47:07 +02:00
Theo Arends d96ed15e95 Bump version v3.1.0.4 2023-10-04 13:52:08 +02:00
Theo Arends 99df8edc2d Fix ESP32 chip version number 2023-10-04 12:47:58 +02:00
s-hadinger 473a8ee999
Audio refactoring, filters and I2SConfig (#19662) 2023-10-03 22:39:02 +02:00
s-hadinger e32c39f21d
Fix access to version from Berry 2023-10-03 19:21:47 +02:00
Christian Baars 58d43333f5
conform to API changes (#19654) 2023-10-03 16:20:48 +02:00
s-hadinger 77cba731b9
Partition_Wizard compatible with grow on mount (#19645) 2023-10-02 23:32:55 +02:00
s-hadinger 795a194d65
Audio prepare for Arduino3 (#19637) 2023-10-02 09:18:53 +02:00
Christian Baars f0b7984466
MI32 legacy: add mi32name, small fixes (#19619)
* add mi32name, small fixes

* remove unused variable
2023-09-29 17:47:17 +02:00
stefanbode 540acdc638
smaller fixes (#19621)
* position report during moverment

during moving the teleperiod will now report the actual position

* fix error on inverted shutter
2023-09-29 17:46:41 +02:00
Barbudor 335e18e8cb
Allow webbutton up to 32 (#19580)
* Allow webbutton up to 32

* use named const
2023-09-29 09:56:52 +02:00
gemu 3bcdf9487d
fix compile error with new email lib (#19608) 2023-09-27 18:36:38 +02:00
stefanbode 955d2d86dd
fix JSON Bug (#19607) 2023-09-27 16:05:32 +02:00
s-hadinger 31e56903c5
Audio refactoring and fixes (#19594) 2023-09-25 23:31:32 +02:00
stefanbode 0f6b59f67e
fix #16560 (#19589)
shutter reacted on QUAD press with HOLD event. Fixed
2023-09-25 09:25:45 +02:00
s-hadinger 74900edc96
Audio change of configuration file format (#19585) 2023-09-24 18:59:43 +02:00
Christoph Friese 5d97a73ddf
Add ENS16x (air quality) and ENS210 (temp & RH) sensors (#19479)
* Add files via upload

Added ENS16x library enabling read-out of ENS160 and ENS161 sensor component (follow-up of CCS811 and iAQcore)
Added ENS210 library to read out ENS210 temperature & humidity sensor

* Add files via upload

Add air quality sensor readout for ENS160 and ENS161 checking two possible I2C addresses (follow up sensor for CCS811 and iAQcore)
Add temperature and humidity sensor readout checking two possible I2C addresses

* Update BUILDS.md

Add USE_ENS16x and USE_ENS210

* Update decode-status.py

Add USE_ENS16x and ENS210

* Update I2CDEVICES.md

Add USE_ENS16x and USE_ENS210

* Update my_user_config.h

Add USE_ENS16x and USE_ENS210

* Update support_features.ino

Add USE_ENS16x and USE_ENS210

* Update tasmota_configurations.h

Add USE_ENS16x and ENS210

* Update tasmota_configurations_ESP32.h

Add USE_ENS16x and USE_ENS210

* Update xsns_111_ens16x.ino

Corrected I2X number

* Update xsns_112_ens210.ino

Corrected I2C number

* Disable USE_ENS16x and USE_ENS210 by default

* Added code size information

* cut down in libs

* optimize tasmota side

* fix ens16x web display

* final fix on alternate addresses

* update code & RAM usage

---------

Co-authored-by: Barbudor <barbudor@barbudor.net>
2023-09-24 18:30:15 +02:00
Barbudor 0d7c2dee72
support https URL (#19582) 2023-09-24 15:39:20 +02:00
s-hadinger 81d287a3b0
Berry fix audio MP3 (#19578) 2023-09-23 12:23:51 +02:00
s-hadinger 375c825d32
More cleaning of audio for ESP32 (#19577) 2023-09-23 11:25:58 +02:00
s-hadinger 06da24df83
Update berry scripts for Shelly (#19535) 2023-09-22 17:32:34 +02:00
Andrew Klaus 3061b06f3b
Adding SGP40 support to SGP4X driver (#19560) 2023-09-22 10:15:04 +02:00
stefanbode 7a75eb7021
Improvement in shuttersetup (#19565)
* Improvement in shuttersetup

- reduce call of energy to 10x a sec.
- stop detection more rigid to avoid wrong messages
- more accurate calculation of duration

* fix energy hickup on autosetup
2023-09-22 08:38:01 +02:00
s-hadinger 761ddaa57b
Berry counter 0-base (#19561) 2023-09-21 09:42:28 +02:00
s-hadinger 7de25acac0
Minor refactoring of audio code for Arduino3 (#19559) 2023-09-21 09:00:28 +02:00
s-hadinger fc513af351
Berry counter (#19558)
* Berry read and write Counters

* rename counter
2023-09-20 22:28:40 +02:00
Theo Arends ffd09da89a Fix DS18B20 for ESP32 with over 33 gpios 2023-09-19 15:20:10 +02:00
s-hadinger ddeb380a19
I2S improvements to MP3 play (#19547) 2023-09-18 22:49:49 +02:00
Christian Baars d6a9eaf8aa
Preps for IDF5.1: microphone/input for i2s audio (#19544) 2023-09-18 20:39:15 +02:00
s-hadinger 2d0339e8bf
Fix IR compilation for ESP32 with Arduino3 (#19537) 2023-09-17 21:12:36 +02:00
Paul Blacknell d2aee662fd
fix: add command data to cmnd response (#19524) 2023-09-15 22:16:27 +02:00
Theo Arends d595e64600 Bump version v13.1.0.3 2023-09-14 15:49:31 +02:00
Theo Arends 81fc4e336b Fix Arduino3 compilation 2023-09-14 14:17:51 +02:00
Theo Arends 2682d82628 Fix ESP32C3 relay click on restart 2023-09-13 23:16:38 +02:00
s-hadinger 00bd97fdc7
Matter virtual lights (#19511) 2023-09-13 22:49:46 +02:00
Theo Arends 860e12b88a Add frequency to BL0942 2023-09-13 15:49:14 +02:00
Theo Arends fffd68ad9c Fix BL0942 higher baudrates 2023-09-13 15:09:30 +02:00
gemu cb4671ee88
fix hardware serial port swap on ESP8266 (#19505) 2023-09-13 09:09:01 +02:00
Theo Arends 088ac1815b Add BL0942 baudrate selection 2023-09-12 21:48:13 +02:00
Theo Arends ee43b43add Fix ESP8266 compilation (#19485) 2023-09-12 15:01:30 +02:00
Theo Arends 16aab339e7 Clean up support command code 2023-09-11 11:45:27 +02:00
Theo Arends 597c3655b0 Fix MAX17043 invalid JSON (#19495) 2023-09-11 11:35:26 +02:00
Paul Blacknell 728b1b2d36
Update xdrv_29_deepsleep.ino (#19492) 2023-09-10 22:35:54 +02:00
Paul Blacknell b117164993
Improved parsing of accumulation data from HRG-15 rain sensor (#19485)
* fix: more robust parsing of accumulation data

* fix: further parsing checks
2023-09-10 22:33:54 +02:00
Theo Arends 0e6a012499 Fix possible MQTT disconnect exception 2023-09-09 23:30:55 +02:00
Theo Arends f9fd813842 Fix core 2.0.12 exception 2023-09-09 23:04:08 +02:00
s-hadinger 4c6ff44e42
Zigbee fix warnings with Arduino3 (#19486) 2023-09-09 15:27:16 +02:00
s-hadinger f1bd9446d5
Matter events phase 1 (#19484) 2023-09-09 14:50:40 +02:00
Paul Blacknell 4cc81f0dbc
Don't reset the MAX17043 battery fuel gauge after waking from Deep Sleep (#19412)
* fix: don't reset the device when coming out of deep sleep

* fix: move debug log message to inside the device validation

* Update xsns_110_max17043.ino

* add: update global battery percentage when max17043 reports new value
2023-09-09 09:48:30 +02:00
s-hadinger 4100682297
Fix TLS by removing redundant BearSSL code from libmail (#19472) 2023-09-06 20:12:59 +02:00
stefanbode f7775b5194
cosmetic changes only (#19468)
- reorder functions alphabetically
- reformat equations for better reading following guidelines
- adding comment for understanding
2023-09-06 16:52:40 +02:00
s-hadinger f4bc7c34c6
Support for IPv6 link-local zones for esp-idf 5.1 (#19469) 2023-09-06 14:48:12 +02:00
stefanbode 3cb63bcb67
Enable multipress events on buttons (#19465) 2023-09-06 09:37:29 +02:00
s-hadinger c2f8821b2f
`Sendmail` upgraded to ESP-Mail-Client v3.4.9 from v1.2.0, using BearSSL instead of MbedTLS (#19460)
* `Sendmail` upgraded to ESP-Mail-Client v3.4.9 from v1.2.0, using BearSSL instead of MbedTLS

* Fix compilation on ESP8266

* Fix compilation

* fix compilation
2023-09-04 23:00:37 +02:00
stefanbode 1ea12583d1
Fix migration error to filesystem settings (#19454) 2023-09-04 21:36:45 +02:00
s-hadinger c6938e2048
Reduce IRAM consumption of HDMI CEC to 1453 bytes (#19452)
* Reduce IRAM consumption of HDMI CEC to 1453 bytes

* Add changelog
2023-09-03 23:15:33 +02:00
s-hadinger bb4d99114a
Berry move mapping from C++ to C (#19450) 2023-09-03 22:50:03 +02:00
s-hadinger fe0423c6cd
Berry cleaned udp class (#19449) 2023-09-03 21:49:35 +02:00
s-hadinger a781ba3fc2
Fix compilation on Arduino 3 (#19447)
* Fix compilation on Arduino 3

* Fix compilation
2023-09-03 19:02:44 +02:00
s-hadinger 4cb8b987a4
Berry move solidified code to C (#19446) 2023-09-03 18:30:22 +02:00
bovirus 262c8b421b
Update italian language (#19442) 2023-09-03 12:23:48 +02:00
Christian Baars 4f6afbf849
all output parts for I2S and IDF5.1 (#19440) 2023-09-02 22:07:20 +02:00
s-hadinger f4b3574ed4
Berry fast_loop is now called every 5ms whatever the Sleep value (#19436) 2023-09-02 11:10:50 +02:00
s-hadinger f7c4c16a9c
Support for HDMI CEC protocol (#19434) 2023-09-01 21:46:18 +02:00
Theo Arends 48cf04db3a Fixed PCF8574 mode 1
- Fixed PCF8574 mode 1 with base relays exception 3/28 regression from v12.4.0.4 (#19408)
- Bump version v13.1.0.2
2023-08-31 15:15:18 +02:00
stefanbode 2bae1f4368
sorry... (#19429) 2023-08-31 10:50:29 +02:00
stefanbode 3301875983
Added compiler option for doubleclick window (#19428) 2023-08-31 08:09:25 +02:00
Theo Arends ff17a377cc Allow display of revision v0.0 2023-08-30 16:03:03 +02:00
Theo Arends 62c36a49b3 Add ESP32-C6 GPIO26/28 in template
Add ESP32-C6 GPIO26/28 in template as Red pins used by flash (QIO) but optionally free if DIO/DOUT
2023-08-30 15:14:46 +02:00
Christian Baars 8e8e019e0f
expected changes for arduino30 (#19421) 2023-08-30 14:17:21 +02:00
Norbert Richter 39083b6add
Fix xdrv_122_file_settings_demo buffer overflow (#19405) 2023-08-29 19:53:40 +02:00
Theo Arends a4cfc414be Final change to GUI twilight 2023-08-29 19:49:20 +02:00
Jason2866 4ebcd89b4f
enable more driver for Arduino 3.0 2023-08-29 19:09:06 +02:00
Barbudor 5395b8c4bd
fix and improve pzem_dc (#19402) 2023-08-27 22:49:24 +02:00
Theo Arends 23d6c0f5d5 Add twilight info to GUI (#19334) 2023-08-27 17:24:33 +02:00
SteWers dd8b85282a
EnergyMargins - always send MQTT telemetry message (#19397) 2023-08-27 10:53:04 +02:00
Theo Arends 3ed1bead44 Update decode-status 2023-08-26 16:20:46 +02:00
Andre H. Beckedorf 8683bc7722
Added passive mode for Sen5x sensor (required for Ike@ Vindstyrka) (#19388)
* Added a passive mode in sen5x sensor for parasitic installations. This skips reset & initialization of sensor on startup and reduces the polling to every 10 seconds to not interfere with and confuse the other I2C master on the bus, e.g. Ike* Vindstyrka.

* Removed obsolete updateCount. Cleanup.
2023-08-26 16:14:30 +02:00
s-hadinger ab94b16d8d
Fix IRHVAC crash v2 2023-08-26 15:04:08 +02:00
Theo Arends d4c1315248 Allow ADE7880 user defines (#19391) 2023-08-26 14:50:33 +02:00
s-hadinger 4ad3070558
Fix crash in IRHVAC (#19389) 2023-08-26 10:17:53 +02:00