Commit Graph

54 Commits

Author SHA1 Message Date
Theo Arends aa91caa35e 6.5.0.6 Add WebColor parameters to Settings
6.5.0.6 20190409
 * Add WebColor parameters to Settings making them persistent and remove the need for using a rule
 * Add alternative IRSend command syntax IRSend raw,<freq>,<header mark>,<header space>,<bit mark>,<zero space>,<one space>,<bit stream> (#5610)
2019-04-09 13:56:19 +02:00
Theo Arends 43a61b3e24 6.5.0.5 Add compile time GUI color options
6.5.0.5 20190406
 * Add compile time GUI color options (#5586)
2019-04-06 18:25:26 +02:00
Theo Arends 8ff2759ccc 6.5.0.4 Fix Configure Timer Web GUI
6.5.0.4 20190402
 * Fix Configure Timer Web GUI (#5568)
 * Add validation check when loading settings from flash
2019-04-02 15:47:39 +02:00
Theo Arends f7c30250c1 Change some more defines to const
Change some more defines to const
2019-03-31 11:59:04 +02:00
Theo Arends e8e5d1c03c 6.5.0.3 Add command Sensor20
6.5.0.3 20190328
 * Add command Sensor20 1..255 to change Nova Fitness SDS01 working period in minutes (#5452)
2019-03-28 12:06:48 +01:00
Theo Arends 1c7fb82af8 6.5.0.2 Change UDP initial message handling
6.5.0.2 20190325
 * Change UDP initial message handling from string to char using static memory and add debug info (#5505)
2019-03-25 16:03:28 +01:00
Theo Arends b7f89c0a8c 6.5.0.1 Change GUI data collection
6.5.0.1 20190319
 * Change Web GUI sensor data collection
2019-03-19 17:31:43 +01:00
Theo Arends bcd6cf0e34 Release 6.5.0
Release 6.5.0
2019-03-19 15:37:21 +01:00
Theo Arends ca5c3d1eeb 6.4.2.22 Remove support for MQTT_LIBRARY_TYPE
6.4.2.22 20190315
 * Remove support for MQTT_LIBRARY_TYPE, MQTT_ARDUINOMQTT and MQTT_TASMOTAMQTT (#5474)
2019-03-15 14:29:47 +01:00
Theo Arends ecbe6ac618 6.4.1.21 Fix exception on GUI
6.4.1.21 20190309
 * Fix exception on GUI Configure Logging and Configure Other (#5424)
2019-03-09 14:39:48 +01:00
Theo Arends d790b1cfca 6.4.1.20 Webserver uses chunks
6.4.1.20 20190304
 * Changed webserver content handling from single String to small Chunks increasing RAM
2019-03-04 18:16:07 +01:00
Theo Arends c0f20d31ff 6.4.1.19 Add command SetOption37
6.4.1.19 20190222
 * Add command SetOption37 for RGBCW color mapping (#5326)
2019-02-25 11:14:33 +01:00
Theo Arends 05b0280019 6.4.1.18 - Fix some exceptions and watchdogs
6.4.1.18 20191221
 * Fix some exceptions and watchdogs due to lack of stack space - part 1 (#5215)
2019-02-21 14:31:31 +01:00
Theo Arends 77db7ba0ff 6.4.1.17 Change template stability
6.4.1.17 20190214
 * Change template update by removing possibility to add user module config keeping template as defined (#5222)
2019-02-14 16:48:28 +01:00
Theo Arends 98ae3eaf54 6.4.1.16 Online template change
6.4.1.16 20190211
 * Initial support for online template change using command Template (#5177)
2019-02-11 19:21:49 +01:00
Theo Arends ae277f59cf Change image defines
6.4.1.15 20190208
 * Change image name BE_MINIMAL to FIRMWARE_MINIMAL (#5106)
 * Change image names USE_xyz to FIRMWARE_xyz (#5106)
2019-02-08 14:55:45 +01:00
Theo Arends 54aaaf50c9 6.4.1.14 Add diag info to status 3
6.4.1.14 20190203
 * Add SetOption32 until SetOption49 diagnostic information to Status 3 report as replacement for second property value in SetOption property name
 * Add Resolution property to Status 3 report providing previous SetOption second value property
2019-02-03 12:38:41 +01:00
Theo Arends 2c164a8b4b 6.4.1.13 Add boot loop offset
6.4.1.13 20190130
 * Add command SetOption36 to control boot loop default restoration (#4645, #5063)
2019-01-30 14:34:31 +01:00
Theo Arends 304ac6fe44 6.4.1.12 code changes (byte/boolean)
6.4.1.12 20190128
 * Change code use of boolean to bool and byte to uint8_t
 * Change code uint8_t flags to bool flags
2019-01-28 14:08:33 +01:00
Theo Arends 505c4794d1 6.4.1.11 Rewrite interlock
6.4.1.11 20190124
 * Remove command SetOption14 as it has been superseded by command Interlock
 * Remove command SetOption63 as it has been superseded by command Interlock
 * Add command Interlock 0 / 1 / 1,2 3,4 .. to control interlock ON/OFF and add up to 8 relays in 1 to 4 interlock groups (#5014)
2019-01-25 17:46:27 +01:00
Theo Arends dcabb9c6dc 6.4.1.10 Fix Hass discovery of MHZ19(B)
6.4.1.10 20190121
 * Fix Hass discovery of MHZ19(B) sensors (#4992)
2019-01-21 22:18:19 +01:00
Theo Arends e5fd45c9c8 6.4.1.9 Fix mDNS addService
6.4.1.9 20190115
 * Add support for Mi LED Desk Lamp with rotary switch (#4887)
 * Fix mDNS addService (#4938)
2019-01-15 16:11:42 +01:00
Theo Arends a23f01080b 6.4.1.8 Add template flags
6.4.1.8 20190107
 * Change sonoff_template.h layout regarding optional module flags like ADC0
 * Add command SetOption62 1 to force no Button/Switch pullup on dedicated modules. Currently only supported on Shelly2 (#4841)
2019-01-07 16:33:18 +01:00
Theo Arends cb8963a7bf 6.4.1.7 Fix regression energy sensors
6.4.1.7 20190106
 * Fix HLW8012, HJL01 and BL0937 based energy sensors low Power (below 10W) measurement regression from 6.4.1.6
2019-01-06 12:29:38 +01:00
Theo Arends 41351001f5 6.4.1.6 Re-introduce Cal commands
6.4.1.6 20190105
 * Add commands PowerCal, VoltageCal and CurrentCal for HLW8012, HJL01 and BL0937 based energy sensors
2019-01-05 15:39:56 +01:00
Theo Arends 67cf1dbbcf 6.4.1.5 Add mDns user control
6.4.1.5 20190103
 * Remove command SetOption35 0-255 for mDNS start-up delay (#4793)
 * Add command SetOption55 0/1 to disable/enable mDNS (#4793)
2019-01-03 17:30:54 +01:00
Theo Arends 447ec6256e 6.4.1.4 Update Copyright (C) 2019
6.4.1.4 20190101
 * Update Copyright (C) 2019
2019-01-01 13:55:01 +01:00
Theo Arends 7ebb7a6067 6.4.1.3 Change sonoff_template.h
6.4.1.3 20181229
 * Change sonoff_template.h module lay-out by removing non-configurable GPIOs
2018-12-29 19:46:28 +01:00
Theo Arends 5a44b12870 6.4.1.2 Rewrite Switch driver
6.4.1.2 20181228
 * Change switch driver making it modular and introduce input filter (#4665, #4724)
 * Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (#4738)
 * Add variable %timestamp% to rules (#4749)
2018-12-28 16:35:19 +01:00
Theo Arends 0b10f48e41 6.4.1.1 Fix most compiler warnings
6.4.1.1 20181224
 * Fix most compiler warnings
2018-12-24 18:14:25 +01:00
Theo Arends 87ddbd8f38 Release 6.4.1 2018-12-24 16:45:41 +01:00
Erik fd965eba09 Remove SetOption55 (hass_short_discovery_msg) 2018-12-22 13:16:04 +01:00
Theo Arends c1102a4863 6.4.0.2 Fix possible dtostrf bos
6.4.0.2 20181221
 * Fix possible dtostrf buffer overflows by increasing buffers
2018-12-21 16:17:06 +01:00
Theo Arends 8792ea48a9 6.4.0.1 New dev release 2018-12-16 16:26:40 +01:00
Theo Arends fc7c1ac6b7 Updates for release 6.4.0
Updates for release 6.4.0
2018-12-15 15:55:51 +01:00
Theo Arends c2f9f5ddbe Updates for release 6.3.0
Update for release 6.3.0
2018-10-26 17:13:17 +02:00
Theo Arends 28e3773113 v6.2.1
Version 6.2.1 20180905
 * Fix possible ambiguity on command parameters if StateText contains numbers only (#3656)
 * Fix Wemo emulation to select the first relay when more than one relay is present (#3657)
 * Fix possible exception due to buffer overflow (#3659)
 * Fix lost energy today and total energy value after power cycle (#3689)
2018-09-05 10:58:56 +02:00
Theo Arends 84e06a1df9 Prep release 2018-08-31 16:38:34 +02:00
Theo Arends f7c38f24f3 6.1.1.14 Add boot loop detection
Add boot loop detection and try to fix
2018-08-30 14:27:33 +02:00
Theo Arends 3abdaaffb7 Revert "6.1.1.14 Add boot loop detection"
This reverts commit b9a875d6fb.
2018-08-30 13:19:09 +02:00
Theo Arends b9a875d6fb 6.1.1.14 Add boot loop detection
Add boot loop detection and try to fix
2018-08-30 12:22:24 +02:00
Theo Arends 19a8113cf4 Revert "Merge branch 'release-6.2' into development"
This reverts commit 433dc8d9d1, reversing
changes made to 6c61cdead7.
2018-08-28 18:13:14 +02:00
Theo Arends 06604b7f09 Version update
Version update
2018-08-28 16:33:05 +02:00
Theo Arends 55b43734d8 6.1.1.13 - Fixes
6.1.1.13 20180828
 * Fix 6.1.1.12 regression of Mem and Var default handling (#3618)
 * Optimizations
2018-08-28 11:10:32 +02:00
Theo Arends d69e88b50b 6.1.1.12 - Add debounce time
6.1.1.12 20180827
 * Add commands ButtonDebounce 40..1000 and SwitchDebounce 40..1000 to have more control over debounce timing. Default is 50mS (#3594)
2018-08-27 12:01:20 +02:00
Theo Arends f090050e69 6.1.1.11 - Sleep fixes part 1
6.1.1.11 20180826
 * Change scheduler phase 1 - Fixed when sleep is enabled: Uptime, Delay, PulseTime and TelePeriod (#3581)
2018-08-26 15:42:35 +02:00
Theo Arends 48668bce7b 6.1.1.10 - Disable core 2.4.2 sleep
Disable wifi sleep for both Esp8266/Arduino core 2.4.1 and 2.4.2 to solve device freeze caused by Espressif SDK bug (#3554)
2018-08-25 11:59:21 +02:00
Theo Arends 6a5c0d29e8 6.1.1.9 - Fixes and Additions
6.1.1.9
 * Allow user override of define MAX_RULE_TIMERS (#3561)
 * Allow user override of define MAX_RULE_VARS
 * Add GPIO options ButtonXn, SwitchXn and CounterXn to select INPUT mode instead of INPUT_PULLUP (#2525)
 * Fix OtaMagic when file path contains a dash (-) (#3563)
2018-08-23 16:05:51 +02:00
Theo Arends bab6ae5644 6.1.1.8 - Fixes and Additions
6.1.1.8
 * Fix MQTT reconnection detection when using TasmotaMqtt library (#3558)
 * Add build time setting of ButtonTopic and SwitchTopic (#3414)
 * Add display features and dynamic buffering
2018-08-23 11:49:17 +02:00
Theo Arends b12c8d39d5 Add initial display support
Add initial display support for Lcd, Oled, Matrix, Tft and e-paper - Need more docs
2018-08-18 18:11:22 +02:00