Pavel Sheremetev
1edc4b57b7
allow define calibration parametrs for bl09xx ( #22030 )
...
Co-authored-by: PavelSheremetev <spd@aira.life>
2024-09-11 08:55:43 +02:00
Theo Arends
798edc20c2
Version v14.2.0.2
...
- Changed Energy BL09xx command ``CurrentSet`` input changed from Ampere to milliAmpere
2024-08-21 16:27:43 +02:00
Theo Arends
c5b92d3ab1
Add Energy Log level 4 message when (Calculated) Apparent Power is less than Active Power indicating wrong calibration ( #20653 )
2024-08-19 22:31:56 +02:00
Theo Arends
652b9cef87
Fix PZEM continue energy monitoring when one phase fails ( #21968 )
2024-08-15 17:32:11 +02:00
f-reiling
de59b036d0
improved read access for SDM630 ( #21897 )
...
* improved read access for SDM630
read access improved by reading several registers in one cycle -> higher update rate
* fixed compiler warning
* fix review finding
* added SDM630_HIGH_UPDATE_RATE to select new implementation
2024-08-09 09:23:52 +02:00
Fabrizio Amodio
73357b6cfd
prevent spike on power ON on BioPDU ( #21892 )
2024-08-03 10:10:11 +02:00
Theo Arends
23de275dbe
Fix POWCT default calibration
2024-07-11 20:51:53 +02:00
Theo Arends
59fc68026b
Add Support for Sonoff POWCT Ring ( #21131 )
2024-07-03 16:31:43 +02:00
Theo Arends
0e6e4e8949
Prep support Sonoff Pow CT
2024-07-02 11:38:55 +02:00
Theo Arends
65588b8126
Increase upper limits user entry for energy drivers ( #16059 )
2024-06-30 17:26:39 +02:00
Artur Nowak
30dd5e6a55
Fix invalid constant description ( #20796 )
2024-02-24 15:27:58 +01:00
SteWers
76a7ab5131
[Energy] Decoupled `FREQUENCY` and `Energy->type_dc` ( #20549 )
2024-01-21 11:37:04 +01:00
SteWers
47384e7057
[SolaxX1] Improve web presentation ( #20535 )
...
* [SolaxX1] Improve web presentation
* [SolaxX1] delay
2024-01-20 11:10:40 +01:00
SteWers
eac5c69720
[SolaxX1] Adapting to multi column energy design ( #20517 )
...
* [SolaxX1] Adapting to multi column energy design
* [SolaxX1] optimize
2024-01-16 16:25:13 +01:00
Theo Arends
4393327bb9
Add support negative power on BL0942 using index 5..8 ( #20322 )
2023-12-29 22:54:32 +01:00
Theo Arends
d5a4f8441b
Fix Berry claiming UART0 if needed ( #20324 )
2023-12-28 17:25:01 +01:00
Theo Arends
22f50abf22
Fix compile error
2023-11-24 17:20:21 +01:00
s-hadinger
8467b41290
Teleinfo use Apparent Power as Active Power approximation ( #19756 )
2023-10-16 08:20:07 +02:00
Theo Arends
860e12b88a
Add frequency to BL0942
2023-09-13 15:49:14 +02:00
Theo Arends
fffd68ad9c
Fix BL0942 higher baudrates
2023-09-13 15:09:30 +02:00
Theo Arends
088ac1815b
Add BL0942 baudrate selection
2023-09-12 21:48:13 +02:00
Barbudor
5395b8c4bd
fix and improve pzem_dc ( #19402 )
2023-08-27 22:49:24 +02:00
Theo Arends
d4c1315248
Allow ADE7880 user defines ( #19391 )
2023-08-26 14:50:33 +02:00
Charles
87735fb232
Teleinfo power fix ( #19381 )
...
* fix power #19244
* cosmetic display
2023-08-25 09:38:36 +02:00
Theo Arends
dd877972be
Phase 1 support C2/C6
2023-08-21 17:10:06 +02:00
paulusbrand
877d4250bb
Removes software based no load threshold. ( #19302 )
...
Lowers ADE7953 builtin no load detection threshold to be able to measure 5 watt power levels.
2023-08-14 10:08:16 +02:00
s-hadinger
2c15cfe4da
Reduced log level for TeleInfo ( #19216 )
2023-07-29 23:09:03 +02:00
Theo Arends
139ac367f0
Add support for energy dummy relays
...
Add support for energy dummy relays using SO48
2023-07-01 14:25:05 +02:00
Theo Arends
ad404dfc0c
Allow disable of frequency
...
Allow disable of frequency in dummy driver
2023-06-30 11:55:48 +02:00
Theo Arends
ca452c5e43
Add Energy->phase_count_virtual
2023-06-30 11:14:37 +02:00
Felix Laevsky
21bb822dec
Fix for ModuleAddress command ( #18490 )
2023-04-23 10:51:00 +02:00
Theo Arends
1e1c536a50
Consolidate Energy Column Gui
2023-03-25 15:16:06 +01:00
Theo Arends
115105bf7c
Consolidate energy messages
2023-03-18 18:26:43 +01:00
Theo Arends
54a2688cbf
Bump v12.4.0.3
...
- Bump v12.4.0.3
- Refactor energy monitoring reducing stack usage and solve inherent exceptions and watchdogs (#18164 )
2023-03-17 21:05:51 +01:00
Pi57
2ce93bdddd
Teleinfo, update energy display (3 phases) ( #18167 )
...
Correct energy display and load bar display in case of 3 phases system
2023-03-13 08:24:10 +01:00
Theo Arends
6f44003cb5
Fix PZEM stabilize period on larger configs
...
Fix PZEM stabilize period on larger configs (#18103 )
2023-03-04 11:56:54 +01:00
Theo Arends
a72bbbe30a
Add interrupt control to MCP23xxx driver
...
- Add interrupt control to MCP23xxx driver
- Enable ADE7880 in tasmota32.bin
2023-03-02 11:24:54 +01:00
Charles
f574273bf9
display teleinfo stats on WEB UI ( #18059 )
2023-02-27 08:20:59 +01:00
Charles
1bfa110e73
fix compilation error with TELEINFO enabled ( #18058 )
2023-02-26 20:52:49 +01:00
Charles
1545f02fb3
Teleinfo, add stats and more checksum controls ( #18052 )
...
* added teleinfo config show_stats parameter
* Added new command and more checksum test
2023-02-25 17:39:33 +01:00
Theo Arends
dca1b5bcff
Refactor ADE7953 for ESP8266
2023-02-22 10:30:47 +01:00
Theo Arends
3ce011c2ce
Attempt to stabilize Shelly Pro 4PM values
2023-02-20 18:02:43 +01:00
Theo Arends
692e9090c8
Attempt to stabilize Shelly Pro 4PM values
2023-02-20 11:31:12 +01:00
Theo Arends
8cbb62d8c9
Simplify virtual buttons/switches
2023-02-09 14:46:54 +01:00
Theo Arends
7a2b5177ac
Fix Shelly Pro 4PM calibration regs
2023-02-08 14:14:49 +01:00
Theo Arends
1c1f6c638f
Add commands PowerCal, VoltageCal and CurrentCall
...
Add commands PowerCal, VoltageCal and CurrentCall to CSE7766/HLW8032 energy driver
2023-02-08 10:50:34 +01:00
SteWers
1d5da9b73b
[SolaxX1] Updated safety descriptions ( #17887 )
...
* [SolaxX1] Updated safety descriptions
Updated safety descriptions
* [Solax X1] disable `#define SOLAXX1_READCONFIG` by default
disable `#define SOLAXX1_READCONFIG` by default
2023-02-06 20:18:38 +01:00
Theo Arends
c699131103
Add Shelly Pro 4PM to lvgl binary
2023-02-05 16:22:18 +01:00
Theo Arends
8bc03bbc06
Bump version v12.3.1.6
...
- Add ESP32 preliminary support for Matter protocol, milestone 1 (commissioning) by Stephan Hadinger
- Add basic support for Shelly Pro 4PM
2023-02-05 14:29:42 +01:00
Theo Arends
cfd34aa02c
Fix Shelly Pro 4PM issues
...
- Fix random ADE7935 measurements
- Fix relay 1 toggle on restart
- Add Shelly Pro 4PM display.ini
2023-02-04 17:48:53 +01:00