Commit Graph

503 Commits

Author SHA1 Message Date
s-hadinger 18bdf07903
Reduced safeboot size by 2.9KB (#21322)
* Reduced safeboot size by 2.9KB

* remove leftover
2024-05-02 23:09:56 +02:00
Jason2866 fb78c3a796
Fix PIO Inspect
Solo1 framework does not support PSRAM
2024-05-02 13:31:34 +02:00
sfromis 311a9f18e6
Wrong feature bit for USE_SPL06_007 (#21286)
Obvious "typo" in setting the feature bit for this recently added sensor. Already mentioned in https://github.com/arendst/Tasmota/pull/21185#issuecomment-2071122611
2024-04-27 16:30:57 +02:00
Jason2866 41970f7d62
Disable psram check to avoid "blinking" of GPIO 16/17 at startup (#21282)
* add `DISABLE_PSRAMCHECK`

* remove code before IDF 5

* add no psram env
2024-04-25 20:19:20 +02:00
s-hadinger 466652549a
Fix faulty printing of IPv4 2024-04-25 11:23:27 +02:00
s-hadinger 2a35f325b8
Put back wifi IPv6 workaround (#21274) 2024-04-25 10:28:42 +02:00
s-hadinger c4431eb6fe
Fixed IPv6 support in safeboot (#21233) 2024-04-20 22:15:54 +02:00
Rai 13cbf26b87
Adds support for SPL06_007 Temperature & Pressure I2C (+10k2 code) (#21185)
* Adds support for SPL06_007 (+10k2 code)

* removes not so used methods.

Removes -2kb

* change doubles to floats

* fixes a name

* change sns idx to 25
2024-04-18 11:20:02 +02:00
s-hadinger 87f5fbd5fd
safeboot: don't publish sensor valies (#21193) 2024-04-15 22:20:28 +02:00
s-hadinger d9895a0fcb
SSD1351, ST7789 drivers replaced with uDisplay (#21184) 2024-04-15 19:52:57 +02:00
s-hadinger a006e5fc53
SSH1106 driver replaced with uDisplay (#21183) 2024-04-15 10:57:14 +02:00
s-hadinger 0b4cddff72
SSD1331 driver replaced with uDisplay (#21177) 2024-04-14 18:06:17 +02:00
s-hadinger 05f4011491
SSD1306 driver replaced with uDisplay (#21176) 2024-04-14 16:46:58 +02:00
s-hadinger ff43dc29b2
ILI9341 driver replaced with uDisplay (#21169) 2024-04-14 10:26:37 +02:00
Theo Arends d678666ef0 Fix MQTT heatindex calculation 2024-04-08 14:58:31 +02:00
Theo Arends 9cacf2f609 Fix Power off due to overtemp and/ot overload 2024-04-08 12:03:11 +02:00
s-hadinger 541f3630a1
Wifi provide Mac Address on Core3 (#21117) 2024-04-07 10:55:53 +02:00
stefanbode b9a0ae98df
Bugfix: power0 if power_lock is used (#21102)
* Bug Fix: power_lock with Power0 command

Power0 changed power regardless of the new lock state of power. New implementation respect the LOCK also on global change

* simplify

* readded the all_on filter to power_lock change

readded the all_on to ensure new defined relays always start with power off ass intended.
2024-04-06 17:21:54 +02:00
s-hadinger 2128dfbade
Refactored Wifi for ESP32 to allow for Core3 (#21106)
* Refactored Wifi for ESP32 to allow for Core3

* Fix case in include

* Grrr

* Fix compilation

* Fix Ethernet IPv6

* Fix wrong hostname due to mac address unknown at start
2024-04-05 23:44:21 +02:00
Theo Arends ed7909f23f Removed unused `#define MQTT_DATA_STRING` support 2024-04-04 17:03:08 +02:00
Theo Arends db92a843fc Change Wifi 5 to Wifi 6 2024-04-04 14:59:32 +02:00
Theo Arends 6558414e2b Add PowerLock to status
- Change Power format in status to bitmap
2024-04-03 15:02:11 +02:00
Theo Arends 7c36029ec2 Add command ``Wifi 5`` to enable 11ax on ESP32 Core3 2024-04-03 14:36:52 +02:00
Theo Arends fe89774fe0 Bump version v13.4.0.4
- Add command ``PowerLock`` to disable power control of selected outputs (#21081)
2024-04-03 11:47:38 +02:00
Theo Arends 7774ce5ad8 Update TXPowerBasedOnRssi() 2024-03-29 14:30:31 +01:00
Theo Arends 4b44d2fa32 Change ESP32 WiFi phy modes 11n and 11ax represented as HT20, HT40 and HE20 (#19350) 2024-03-29 13:04:44 +01:00
Marcus Better 1a462c986c
[tuyamcu_v2] Fix suppressed dimmer updates from MQTT (#20950)
The driver tried to avoid loops when state updates from the MCU (eg
from physical button press) could be reflected back by Tasmota and
trigger another MCU command, followed by a state update. It did this
by tracking the source of the command in the last_source and
last_command_source variables, suppressing the command if either of
those was SRC_SWITCH.

However this logic is faulty: Since there are two last_source
variables to check, a command might reset one of them, but the other
would still suppress the update. As it turns out, MQTT commands would
only set last_source but not last_command_source. As a result, any
dimmer changes via MQTT would be dropped by the driver and not applied
to the MCU.

Switch functionality (on/off) was still working because those do not
rely on last_command_source, only last_source.

This change removes the loop detection logic altogether for dimmer
updates. This should be safe, because the driver already has the
latest dimmer value in its shadow state, and will not try to re-apply
a current value, thus breaking the loop.

This patch has been tested with several CE-WF500D dimmers which had
this problem.
2024-03-14 17:42:52 +01:00
Theo Arends ce419cce81 Add LoRa to ESP8266 2024-02-29 17:12:08 +01:00
s-hadinger a2bb0afea2
IR support data larger than 64 bits (#20831) 2024-02-28 22:42:29 +01:00
Theo Arends 77cba87994 Update changelogs 2024-02-27 14:16:13 +01:00
Theo Arends 9a5217bf90 Add heatindex to BMP driver (#4771) 2024-02-19 14:17:40 +01:00
Theo Arends fb003e006e Add Show calculated heat index if temperature and humidity is available with ``#define USE_HEAT_INDEX`` (#4771) 2024-02-18 18:00:41 +01:00
Theo Arends 1abaf146b5 Fix ESP32 PWM activity on unconfigured PWM GPIOs (#20732) 2024-02-17 15:19:12 +01:00
Theo Arends 080cdb4f0d Add core3 ethernet support on SPI for all ESP32 models 2024-02-14 16:19:51 +01:00
Jason2866 2f32e3c2ee
Fix C2 compile error 2024-02-09 13:53:19 +01:00
Theo Arends 715914bdd0 Add internal support for persistent JSON settings using single file 2024-02-07 22:55:39 +01:00
Fulvio Spelta ab8676d865
SetOption158 publish/suppress ModbusReceived MQTT messages (#20678) 2024-02-07 15:57:09 +01:00
Andrey Osin 478bd0ce17
Fix Wi-Fi scan results process when scanning fails. (#20631) 2024-02-03 12:35:13 +01:00
Theo Arends 95b03592dc Add ISR logging failsafe 2024-01-30 16:57:45 +01:00
Theo Arends 886b453e69 Fix ESP8266 eFuseMac result 2024-01-28 17:34:15 +01:00
Theo Arends af9d4cadd8 GPIO Viewer update from 1.0.7 to 1.5.0 2024-01-27 23:58:00 +01:00
Theo Arends 5d06a25915 Add ESP32-C3 support for GPIO11 (#18350) 2024-01-26 12:13:23 +01:00
Theo Arends 10885fe60d Refactored rules ``Subscribe`` using LList allowing full message size and enabled by default 2024-01-22 16:57:59 +01:00
Theo Arends 1ffbbc914d Refactor backlog from LinkedList to TasmotaLList 2024-01-21 22:07:49 +01:00
Theo Arends 95f76d623f Changed command ``TimedPower`` refactored from String to LList 2024-01-21 14:29:44 +01:00
Theo Arends 9608b7513a Refactor backlog by removing some str copies 2024-01-20 22:45:24 +01:00
Theo Arends 05014d48cf Refactor backlog from String to char 2024-01-20 17:18:03 +01:00
Theo Arends c9d0106007 Removed max number of 30 backlog entries 2024-01-18 16:32:28 +01:00
Theo Arends 0f541a963b Fix TimedPower blink off 2024-01-18 10:38:22 +01:00
Theo Arends 2832ed914b Change command ``TimedPower``
Change command ``TimedPower`` from erasing all timers to showing remaining timers
2024-01-17 15:55:25 +01:00
Theo Arends 9d00897cb4 Fix TimedPower using state names 2024-01-16 15:07:23 +01:00
Theo Arends 2c5508ee96 Add TimedPower update before end 2024-01-16 12:40:35 +01:00
Theo Arends 77d54985d0 Tune TimedPower 2024-01-16 11:02:24 +01:00
Theo Arends 789fd1e055 Add command ``TimedPower``
Add command ``TimedPower<index> <milliseconds>[,ON|OFF|TOGGLE|BLINK]`` executes ``Power<index> [ON|OFF|TOGGLE|BLINK] `` and after <millisecond> executes ``Power<index> [OFF|ON|TOGGLE|OFF]``
2024-01-15 23:58:33 +01:00
s-hadinger 9045a7da83
IP stack compatible with new Core3 IPv6 implementation (#20509)
* IP stack compatible with new Core3 IPv6 implementation

* Fix compilation

* Forece CI
2024-01-15 21:05:40 +01:00
Theo Arends c2d6bbf2c1 Code admin 2024-01-10 11:13:19 +01:00
Theo Arends 0d300aebff Update GPIOViewer
- Add ESP8266 PWM state logging
- Add ADC state functions
2024-01-07 15:10:19 +01:00
Theo Arends 13a9c3b5b2 Add delays to wifi init code
Add delays to wifi init code to fix some edge power cases.
2023-12-27 17:29:03 +01:00
Theo Arends e5abd47c86 More syslog explaining 2023-12-21 14:49:37 +01:00
Theo Arends 2f824b1976 Document different syslog layouts 2023-12-21 14:30:49 +01:00
Theo Arends a445c7f23a Fix syslog server warning
Fix syslog server warning caused by lack of <PRI> field and hostname starting with 'z' (#14689)
2023-12-20 16:00:27 +01:00
Theo Arends b81eaf5bc8 Support syslog updates every sleep
Support syslog updates every sleep or every second if `#define SYSLOG_UPDATE_SECOND` (#20260)
2023-12-19 12:45:13 +01:00
budulinek 23b4cd08d4
Realtime syslog (#20260)
* Realtime Syslog

* Update tasmota.ino

---------

Co-authored-by: Theo Arends <11044339+arendst@users.noreply.github.com>
2023-12-19 12:29:39 +01:00
stefanbode f19d15654c
Restart 9 support deepsleep with TIMER based wakeup (#20165)
* Allow restart 9 to use TIMERS for wakeup

* support for restart 9

allow restart 9 to use any defined TIMER to restart a a specific time.
2023-12-05 13:47:53 +01:00
Theo Arends 728f91b602 Update changelogs 2023-12-05 10:07:02 +01:00
Theo Arends 14793c2594 Shorten code and add more comments 2023-12-04 11:44:59 +01:00
Theo Arends 7a6cca6d20 Add command ``WebCanvas``
Add command ``WebCanvas linear-gradient(#FF0018 7%,#FFA52C,#FFFF41,#008018,#0000F9,#86007D 93%)`` to set GUI canvas
2023-12-03 15:52:44 +01:00
Theo Arends 28c8f8cf47 Fix PowerOnState on ESP32 (#20144) 2023-12-02 17:49:02 +01:00
Theo Arends b7819bcfac ESP32 show LHBT background if ``WebColor2`` bit0 is not set. Bit0 is default set using #252525 2023-12-02 16:59:04 +01:00
Theo Arends ad831418e5 Fix SO51 2023-11-24 11:36:20 +01:00
s-hadinger 1c60527099
Berry `scale_int`, equivalent of `scale_uint` for signed integers (#20090) 2023-11-23 11:31:26 +01:00
s-hadinger 1cd13d7f66
Fixed `changeUIntScale` for linearity when expanding range (#20089) 2023-11-23 10:57:47 +01:00
Theo Arends 74aa056650 Final fix ESP32C3 relay toggle
Final fix ESP32C3 relay toggle on restart (#20030)
2023-11-17 16:17:29 +01:00
Theo Arends 5297bab041 Revert "Final fix ESP32C3 relay toggle"
This reverts commit 4489dba8dd.
2023-11-17 16:06:45 +01:00
Theo Arends 4489dba8dd Final fix ESP32C3 relay toggle
Final fix ESP32C3 relay toggle on restart (#20030)
2023-11-17 15:43:42 +01:00
Theo Arends b02a66a1b6 Fix ESP32C3 relay toggle on restart
Fix ESP32C3 relay toggle on restart (#20030)
2023-11-17 13:02:19 +01:00
Theo Arends f0162377e2 Fix ESP32-C3 gpio hold
Fix ESP32-C3 gpio hold on non-relay gpios (#20030)
2023-11-16 10:26:21 +01:00
Theo Arends c1fa07dd51 Fix ESP32C3 ledlink 2023-11-13 10:54:25 +01:00
Theo Arends 098e29d7e0 Update support_esp32.ino 2023-11-10 12:42:13 +01:00
Theo Arends ede5e398a6 Refactor hardware specific code 2023-11-10 12:24:20 +01:00
Theo Arends 7febc11b8c Fix C2/C6 exception 2023-11-10 11:20:41 +01:00
Theo Arends 211da12342 Update feature list 2023-11-09 15:32:43 +01:00
Theo Arends c6ca0ff10f Squeeze some bytes out of it 2023-11-09 14:59:31 +01:00
Theo Arends 9b5945a117 Add feature10 bitmap 2023-11-09 14:25:24 +01:00
Jason2866 361c15d63b
Delete homekit.c (#19923) 2023-11-04 13:05:48 +01:00
s-hadinger 46df036b51
Cosmetic changes (#19920) 2023-11-04 11:46:25 +01:00
Theo Arends 63297ec5c9 Start using constexpr in featurelist
Saves 128 bytes.
2023-11-02 17:44:29 +01:00
Theo Arends 6410e72b6c Add max size 2023-10-30 21:52:58 +01:00
Theo Arends 09f473b734 A future proof solution ;-) 2023-10-30 21:47:49 +01:00
Theo Arends 444f4fcd62 Fix ESP32 32MB program flash size 2023-10-30 15:29:01 +01:00
Theo Arends 0ae793a8d4 Save some bytes 2023-10-21 17:37:31 +02:00
Theo Arends 57860b692d Fix GpioRead (#19810) 2023-10-21 17:20:55 +02:00
s-hadinger 356de1a16a
Add command ``GpioRead`` (#19814)
* Add command ``GpioRead``

* change output
2023-10-21 15:56:40 +02:00
Theo Arends b6811b2f4e Prep ESP32 I2C bus2 support 2023-10-19 16:59:53 +02:00
Theo Arends 0984c01828 Update changelogs 2023-10-13 14:50:51 +02:00
Theo Arends d96ed15e95 Bump version v3.1.0.4 2023-10-04 13:52:08 +02:00
Theo Arends 99df8edc2d Fix ESP32 chip version number 2023-10-04 12:47:58 +02:00
Barbudor 335e18e8cb
Allow webbutton up to 32 (#19580)
* Allow webbutton up to 32

* use named const
2023-09-29 09:56:52 +02:00
Christoph Friese 5d97a73ddf
Add ENS16x (air quality) and ENS210 (temp & RH) sensors (#19479)
* Add files via upload

Added ENS16x library enabling read-out of ENS160 and ENS161 sensor component (follow-up of CCS811 and iAQcore)
Added ENS210 library to read out ENS210 temperature & humidity sensor

* Add files via upload

Add air quality sensor readout for ENS160 and ENS161 checking two possible I2C addresses (follow up sensor for CCS811 and iAQcore)
Add temperature and humidity sensor readout checking two possible I2C addresses

* Update BUILDS.md

Add USE_ENS16x and USE_ENS210

* Update decode-status.py

Add USE_ENS16x and ENS210

* Update I2CDEVICES.md

Add USE_ENS16x and USE_ENS210

* Update my_user_config.h

Add USE_ENS16x and USE_ENS210

* Update support_features.ino

Add USE_ENS16x and USE_ENS210

* Update tasmota_configurations.h

Add USE_ENS16x and ENS210

* Update tasmota_configurations_ESP32.h

Add USE_ENS16x and USE_ENS210

* Update xsns_111_ens16x.ino

Corrected I2X number

* Update xsns_112_ens210.ino

Corrected I2C number

* Disable USE_ENS16x and USE_ENS210 by default

* Added code size information

* cut down in libs

* optimize tasmota side

* fix ens16x web display

* final fix on alternate addresses

* update code & RAM usage

---------

Co-authored-by: Barbudor <barbudor@barbudor.net>
2023-09-24 18:30:15 +02:00
Theo Arends ffd09da89a Fix DS18B20 for ESP32 with over 33 gpios 2023-09-19 15:20:10 +02:00
Theo Arends 81fc4e336b Fix Arduino3 compilation 2023-09-14 14:17:51 +02:00
Theo Arends 2682d82628 Fix ESP32C3 relay click on restart 2023-09-13 23:16:38 +02:00
Theo Arends 16aab339e7 Clean up support command code 2023-09-11 11:45:27 +02:00
Theo Arends 597c3655b0 Fix MAX17043 invalid JSON (#19495) 2023-09-11 11:35:26 +02:00
s-hadinger f4bc7c34c6
Support for IPv6 link-local zones for esp-idf 5.1 (#19469) 2023-09-06 14:48:12 +02:00
s-hadinger a781ba3fc2
Fix compilation on Arduino 3 (#19447)
* Fix compilation on Arduino 3

* Fix compilation
2023-09-03 19:02:44 +02:00
s-hadinger f7c4c16a9c
Support for HDMI CEC protocol (#19434) 2023-09-01 21:46:18 +02:00
stefanbode 2bae1f4368
sorry... (#19429) 2023-08-31 10:50:29 +02:00
stefanbode 3301875983
Added compiler option for doubleclick window (#19428) 2023-08-31 08:09:25 +02:00
Theo Arends ff17a377cc Allow display of revision v0.0 2023-08-30 16:03:03 +02:00
Theo Arends 62c36a49b3 Add ESP32-C6 GPIO26/28 in template
Add ESP32-C6 GPIO26/28 in template as Red pins used by flash (QIO) but optionally free if DIO/DOUT
2023-08-30 15:14:46 +02:00
Theo Arends 7f24d2027f Fix rotary edge cases (#19164) 2023-08-25 17:06:27 +02:00
Theo Arends 03c72501a5 Finally add ESP32-P4 ;-) 2023-08-25 13:11:00 +02:00
Theo Arends d5b12c8718 Consolidate esp32 hardware info 2023-08-25 12:48:35 +02:00
Theo Arends b1fba92e87 Fix idf chip revision 2023-08-25 10:55:20 +02:00
Theo Arends d340c91cd7 Revert "Fix idf chip revision"
This reverts commit e5cb367581.
2023-08-24 20:52:36 +02:00
Theo Arends e5cb367581 Fix idf chip revision 2023-08-24 17:48:41 +02:00
Theo Arends 701d33f645 Phase 2 support C2/C6 2023-08-23 13:02:13 +02:00
Theo Arends 0c3b559630 Phase 1 support C2/C6 2023-08-21 16:00:20 +02:00
Theo Arends 2eaa0fcb67 Update switch comments 2023-08-17 23:28:27 +02:00
Christian Baars b5cc48dd64
ESP32: pass flashmode at build time to macro definition (#19299)
* pass flashmode at build time to macro definition

* fix 8266 builds
2023-08-12 11:31:06 +02:00
Christian Baars 7544d2f23c
fix IRAM_ATTR specified both in function declaration and definition (#19286) 2023-08-10 12:19:18 +02:00
s-hadinger 0b3d6fd146
Prepare for Arduino v3 / esp-idf v5 2nd batch (#19265) 2023-08-05 20:34:24 +02:00
s-hadinger 5c8c7cdfca
Prepare for Arduino v3 / esp-idf v5 (#19264) 2023-08-05 15:11:10 +02:00
Christian Baars 732e4106b8
add wifitest3 (#19259) 2023-08-04 20:17:36 +02:00
Theo Arends 978a21240c Update changelogs 2023-07-24 15:30:48 +02:00
Theo Arends 421c95a51b Update change logs 2023-07-22 14:55:20 +02:00
Theo Arends b149443691 Fix default battery level
- Fix default battery level (#19160)
- Bump version to v13.0.0.3
2023-07-21 14:35:22 +02:00
stefanbode d1a4296867
New DEEPSLEEP topic for HA + Battery Level % support (#19134)
* New LWT on deepsleep

To allow better integration into HA LWT topic will report details of sleep status:
16:54:04.388 MQT: hm/tele/ESP_3284D1/LWT =
{"Sleep":{"Time":"2023-07-17T16:55:03","Sleep":1689612844,"Wakeup":1689612903}}

* Revert LWT back to non JSON

Send DeelSleep on LWT
Send Deepsleep parameters on topic DeepSleep

* Setting default for batteryLevel

* Enable BatteryPercentSet

Changing the battery level e.g. by rule

* Added Battery % to status message

* added battery_level_percent

* Added battery % support in STATE message

* Enable setting battery level

101 is reserved for power-plug. No battery Level reported

* Setting default for battery Level

101 is reserved for power plug
0..100 normal battery values

* Revert back LWT to Offline

Removed "DeepSleep" LWT status until further decision is made. Current implementation is technical sufficient for HA to detect a battery powered device

* Added discovery message after deepsleep change

* Added discovery for battery and deepsleep
2023-07-20 09:51:08 +02:00
s-hadinger 2a3690b866
Berry `tasmota.loglevel()` and `tasmota.rtc_utc()` for faster performance (#19152) 2023-07-19 20:58:50 +02:00
sfromis 6382c2806c
More user-friendly defaults for DisplayMode and DisplayDimmer (#19138)
Changing default for DisplayMode from 1 to 0. Users are getting confused by the display doing something they did not ask for (and not being aware of DisplayMode). This got worse with LVGL/HASPmota displays becoming common, with users having much less reason to dive into the old DisplayXxxxx commands. And it may even be hard to see that it is even a display of time/date causing the display to flicker.

Changing default for DisplayDimmer from 10% to 50%. The low brightness of 10% is not always easy to see, especially in daylight. 50% is generally better, while not going "full blast" with 100%.
2023-07-18 08:26:51 +02:00
Theo Arends 9638beacec Fix possible buffer overflow 2023-07-12 12:45:02 +02:00
Theo Arends 5b6a25a7a0 Fix driver config backup and restore
Fix driver config backup and restore (#18295)
2023-07-12 10:52:58 +02:00
Theo Arends 889e6ea54d Fix driver config restore 2023-07-11 16:12:04 +02:00
Theo Arends 43bc81010f Configuration file save and restore .xdrvsetXXX
Configuration file save and restore now backup and restore ``.xdrvsetXXX`` files too (#18295)
2023-07-10 16:03:32 +02:00
Theo Arends 522e6cf234 Implement deepsleep(0)
Implement deepsleep(0) as command ``restart 9`` (#19024)
2023-07-03 21:07:45 +02:00
Theo Arends 3edb5bb096 Move SD card init up
Move SD card init up (#18934)
2023-07-01 12:48:33 +02:00
Andrew Klaus eb655a4a8f
Add support for SGP41 TVOC/NOx Sensor (#18880)
* Initial support for SGP41

* Removing delay() use from SGP4x driver

* Using i18n for TVOC/NOx raw values as well
2023-06-29 09:04:08 +02:00
Theo Arends 504b51a9b4 Add command ``Delay -1``
Add command ``Delay -1`` to wait until next second (#18984)
2023-06-28 11:53:23 +02:00
s-hadinger 69b2b93d61
Matter UI and logs polishing (#18866) 2023-06-12 19:45:18 +02:00
Theo Arends 07b7a7ee9a Fix initial ESP32 Energy kWh total time 2023-05-29 16:19:55 +02:00
Theo Arends e05d75248e Add undocumented feature 2023-05-25 17:13:31 +02:00
Theo Arends d0e88c9dae Fix BusyDelay WS2812 2023-05-24 17:24:48 +02:00
Theo Arends fc67cca8b4 Add generic SystemWaitIfBusy() to fix WS2812 led flicker
Add generic SystemWaitIfBusy() to fix WS2812 led flicker
2023-05-24 16:21:59 +02:00
Theo Arends ae518424bc Add IPv4 DNS lookup to influxdb
- Add IPv4 DNS lookup to influxdb (#18015)
- Add response to influxdb send
2023-05-21 15:34:36 +02:00
Theo Arends f5d6578fb5 Fix correct JSON display of WifiPower float 2023-05-19 17:41:18 +02:00
Theo Arends 77103baa0a Add internal support for max log level 2023-05-19 15:20:21 +02:00
s-hadinger 043ea2986b
Berry `tasmota.wifi()` would wrongly report wifi as up (#18687)
* Berry `tasmota.wifi()` would wrongly report wifi as up

* Fix ESP8266 compile

* Fix display of IP in wifiman

* Improve wifiman IP handling for IPv6
2023-05-18 11:23:09 +02:00
Theo Arends 4a7e4f9a17 Refactor dynamic wifi tx power 2023-05-17 11:44:14 +02:00
Theo Arends 57f85ae478 Optimize dynamic WiFi power 2023-05-17 10:45:00 +02:00