2ed602057c
Add SEN5X to I2C devices ( #17736 )
2023-01-29 08:06:25 +01:00
17d68750d9
WIP Tuya MCU Bridge driver alternative to the TuyaMCU driver ( #17626 )
...
* WIP Tuya MCU Bridge driver alternative to the TuyaMCU driver
The main difference is this driver does not try and wire MCU data points
(Dps) into the tasmota power/light/etc controls. Instead each Dp ends up
being relayed directly to MQTT and the rules subsystem. If you want to
change the state of something wired up to the MCU, you send tuyamcu
specific commands to manipulate the Dp.
Each Dp gets a type and id specific topic that is sent to MQTT. eg, Dp
id 1 type bool looks like tele/%topic%/TUYAMCUBOOL1. To change state you
send a TuyaMCUBool1 command (ie, the command index value is used as the
DpId, which is nice and symmetrical) with the new value.
Currently Rules operate on TuyaMCU#TypeDpid things, eg, "rule1 on
TuyaMCU#Bool1 do power %value% endon" toggle the power on the tasmota
device when the state of the thing on the MCU changes too.
The most obviously missing stuff at the moment is:
- better relaying of the wifi/mqtt status to the MCU
- handling wifi reset requests from the MCU
- low power stuff?
- support for sending status updates and device info queries.
- restarting the tuya mcu state machine?
- restarting the rx state machine when no bytes are rxed for a period of
time
- time sync
* shorten the log prefix to TYB (3 chars).
requested by arendst
* use the local definition for the SET_DP command.
reaching back to the existing tuyamcu code isnt reliable.
pointed out by arendst
* put the todo list in the code so it can be tracked
* check the wifi/mqtt state every second and update the mcu if it changes.
* fix rule processing when Dp state is changed from a cmnd.
rule processing was done as part of publishing the state, but publishing
the state when it was updated by a command only happened if So59 was
set. split rule processing out of publish and call them separately as
needed.
publish is now called from teleperiod, status updates from the MCU,
and from cmnds if so59 is set. rules are called from status updates from
the MCU and from cmnds.
Co-authored-by: David Gwynne <dlg@defeat.lan.animata.net>
2023-01-08 17:35:45 +01:00
14ee8decf7
Update changelogs
...
Add support for PCA9632 4-channel 8-bit PWM driver as light driver by Pascal Heinrich (#17557 )
2023-01-01 14:29:41 +01:00
20a50ffc2e
Revert Tuya rewrite
...
- Update changelogs
2022-12-31 16:08:59 +01:00
fc8039d960
Adding support for ME007-ULS narrow FoV ultrasonic distance sensor ( #17376 )
...
* Squashed commit of the following:
commit 1441459a47cff0a43aa61ce47510585ee03649f3
Merge: a9fcbd342 7e27945e5d83119897eee86f01ade408921ee7d40b8d1816fd78fb
2022-12-14 11:52:26 +01:00
53563d44d8
Add support for HLK-LD2410 24GHz smart wave motion sensor
...
Add support for HLK-LD2410 24GHz smart wave motion sensor
2022-11-26 17:49:25 +01:00
5f3d504c30
Add support for HMC5883L
...
Add support for HMC5883L 3-Axis Digital Compass sensor by Andreas Achtzehn (#17069 )
2022-11-15 11:11:32 +01:00
e83882b655
Update changelogs
2022-11-10 13:54:05 +01:00
a469b35f02
Bump version to v12.2.0.3
2022-11-07 11:06:17 +01:00
3427e1bee3
Support for Modbus Energy Monitoring devices
...
Support for Modbus Energy Monitoring devices using a rule file. See ``xnrg_29_modbus.ino`` for more information
2022-10-08 16:14:11 +02:00
da623701d7
Add support for QMC5883L magnetic induction sensor
...
Add support for QMC5883L magnetic induction sensor by Helge Scheunemann (#16714 )
2022-10-05 15:00:03 +02:00
ec964d1c9e
Add can bus sniffer
...
Add can bus sniffer based on MCP2515 (#16684 )
2022-09-29 14:31:40 +02:00
6bfb9d6aa4
Update changelogs
2022-09-24 16:53:11 +02:00
86e45969bd
Support for DFRobot SEN0390 V30B ambient light sensor
...
Add support for DFRobot SEN0390 V30B ambient light sensor (#16105 )
2022-09-02 13:13:47 +02:00
684584a5e5
Command ``SetOption146 1`` to enable display of ESP32 internal temperature
2022-09-02 11:24:47 +02:00
cbfd2e1db7
Put USE_SGP40 at the correct place in decode-status
...
Remove used line from support_features.ino
2022-08-26 10:07:57 -04:00
214f4bbdfd
Add support for SGP40 sensor
2022-08-25 15:51:51 -04:00
103808ce44
Add command ``StatusRetain``
...
Add command ``StatusRetain`` (#11109 )
2022-08-19 14:24:55 +02:00
2cdfcf5345
Update changelog and templates
2022-08-11 14:47:31 +02:00
202ec86453
Update changelogs
2022-08-05 15:52:53 +02:00
d475ccd5c5
Update decode-status.py
2022-07-25 10:00:12 +02:00
722406a461
Add support for Modbus bridge
...
Add support for Modbus bridge adding commands ``ModbusSend``, ``ModbusBaudrate`` and ``ModbusSerialConfig`` (#16013 )
2022-07-20 10:41:02 +02:00
846b217427
Bump version to v12.0.2.4
...
- Bump version to v12.0.2.4
- Command ``SetOption45 1..250`` to change default bistable latching relay pulse length of 40 milliseconds (#15856 )
2022-07-16 14:32:18 +02:00
e6b4a77abd
Add ESP32 Sonoff sensor support
...
- Bump version to v12.0.2.3
- Add ESP32 SI7021, THS01 and MS01 support
- Fix THRxxD template
2022-07-06 16:58:27 +02:00
f76400ba03
Initial implementation of SM2335 LED driver.
2022-06-21 00:32:56 -05:00
3a22874124
Increase wifi retry time ( #14394 )
...
- Increase wifi retry time (#14394 )
- Remove 1 second system hang on wifi re-connect (retry)
- Try to limit the number of seconds unresponsiveness due to wifi reconnect
2022-06-10 14:49:35 +02:00
19e8f1a2af
Prep HYT271 sensor support
2022-05-31 14:56:09 +02:00
20e12c2a41
Update changelogs
2022-05-30 11:34:29 +02:00
65a87fd747
Add command ``SetOption141 1``
...
- Add command ``SetOption141 1`` to disable display of module name in GUI header
- Prep SO146-177
2022-05-29 15:49:57 +02:00
cab5cb4753
Update changelogs
2022-05-04 15:34:26 +02:00
d71c1711f2
Add command ``SetOption139 0/1``
...
- Add command ``SetOption139 0/1`` to switch between pressure unit "mmHg" (0) or "inHg" (1) when ``SO24 1`` (#15350 )
- Change double constants to float constants saving 200 bytes
2022-04-19 14:45:26 +02:00
c3132594d3
Add support for improv as used by esp-web-tools
2022-04-02 11:43:29 +02:00
1b04a00488
Add command ``SetOption136 1``
...
Add command ``SetOption136 1`` to disable single sensor reports from Tuya devices while keeping teleperiod reports (#15216 )
2022-03-25 16:27:57 +01:00
55610efcb2
Support for up to four DS3502
...
Support for up to four DS3502 digital potentiometers with command ``Wiper<x> 0..127``
2022-03-17 16:03:40 +01:00
c20bc70d1c
Add support for PCF85363 RTC as used in Shelly 3EM
...
Add support for PCF85363 RTC as used in Shelly 3EM (#13515 )
2022-03-12 17:38:49 +01:00
4069bd1914
Add ADE7880
2022-03-11 16:54:57 +01:00
d45a0426e7
Bind BL6523
2022-02-16 15:41:37 +01:00
bdf46ef989
Fix: add "USE_CM110x" to decode-status.py
...
When the CM110x integration has been added, the decode-status.py
a_features array was not updated accordingly.
Signed-off-by: Roberto Bonacina <roby.bonacina@tutanota.com>
2022-02-05 16:21:30 +01:00
7aacdf4fbe
Add support for BME688
...
Add support for BME688 with latest Bosch-Sensor-API library (#14513 )
2022-01-19 17:05:39 +01:00
88b296cf83
Support for Eastron SDM230
...
Add support for Eastron SDM230 modBus energy meter (#13443 )
2022-01-15 15:02:45 +01:00
4dc210004a
Inconsistencies in decode-status.py feature flags
...
Not all flag names were updated to match updates to Tasmota source in `support_features.ino`. I assume the changes to be uncontroversial, with the possible exception of:
While `USE_TUYA_DIMMER` arguably is a more descriptive name than `USE_TUYA_MCU` the former name is not found anywhere in Tasmota code, which has
```
#if defined(USE_LIGHT) && defined(USE_TUYA_MCU)
feature2 |= 0x00008000; // xdrv_16_tuyadimmer.ino
#endif
```
My assumption is that the actually used names "wins", to avoid user confusion, even if you could say that the name `USE_TUYA_MCU` is too broad for the actual feature. In principle, it would be more logical to create a new "real" `#define` name, but backwards compatibility and all that.... Makes sense?
I'm ok either way....
2022-01-13 21:38:56 +01:00
0cdf6c9653
Refactor Shift595
2021-12-05 14:49:49 +01:00
5d60365dfb
Formalize USE_SONOFF_SPM
2021-12-01 11:21:56 +01:00
3535b7543e
Add support for GPE Multi color smart light
...
Add support for GPE Multi color smart light as sold by Action in the Netherlands
2021-11-30 16:03:57 +01:00
ae275d984f
Add support for HDC2010 temperature/humidity sensor
...
Add support for HDC2010 temperature/humidity sensor by Luc Boudreau (#13633 )
2021-11-11 11:33:08 +01:00
a466c5abf3
Add support for HM330X
...
Add support for HM330X SeedStudio Grove Particule sensor (#13250 )
2021-10-08 13:59:11 +02:00
16f9e2bd88
Merge branch 'development' into development+SCD40
2021-09-23 14:42:04 +02:00
65989d2552
bl09xx driver for both bl0939 and bl0940
2021-09-21 18:25:52 +02:00
a260fa85a3
configuration files updated for SCD40/41
2021-09-15 13:26:39 +02:00
6ddb14bc6a
Add Command ``SetOption2 1``
...
Add Command ``SetOption2 1`` to enable display of global temperature/humidity/pressure info to JSON sensor message
2021-09-01 09:42:10 +02:00
Tyeth Gundry
David Gwynne
Theo Arends
Mathias
Jean-Pierre Deschamps
Cossid
Roberto Bonacina
sfromis
Barbudor
Arnold Niessen