mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
18,662 Commits 6 Branches 113 Tags 1.2 GiB
Commit Graph

8604 Commits

Author SHA1 Message Date
Theo Arends 03c72501a5 Finally add ESP32-P4 ;-) 2023-08-25 13:11:00 +02:00
Theo Arends d5b12c8718 Consolidate esp32 hardware info 2023-08-25 12:48:35 +02:00
Theo Arends b1fba92e87 Fix idf chip revision 2023-08-25 10:55:20 +02:00
Charles 87735fb232
Teleinfo power fix (#19381) 
* fix power #19244

* cosmetic display
 2023-08-25 09:38:36 +02:00
Theo Arends d340c91cd7 Revert "Fix idf chip revision" 
This reverts commit e5cb367581.
 2023-08-24 20:52:36 +02:00
Theo Arends e5cb367581 Fix idf chip revision 2023-08-24 17:48:41 +02:00
Theo Arends 9b6efc674d Fix compilation 2023-08-24 15:17:04 +02:00
stefanbode d1e85635e3
fix inverted shutter inconsistencies (#19374) 
* inverted shutter fix on overflow

* fix inverted_shutter > 9

fix on inverted shutter at esp32.
fix tilt behavior on inverted shutter

* fix tilt behavior on inverted shutter
 2023-08-24 12:39:42 +02:00
Christian Baars 65a1a4feeb
Neopixel add SPI driver for C2 and some minor updates (#19372) 2023-08-24 10:34:17 +02:00
Theo Arends 0d80e639ef Fix Core 3 compilation 2023-08-23 15:29:42 +02:00
Theo Arends 701d33f645 Phase 2 support C2/C6 2023-08-23 13:02:13 +02:00
stefanbode ca14dc5507
Shutter ESP32 fixes (#19362) 
* fix esp32 shutter

* fix shutterinvert+shutterbutton
 2023-08-22 09:21:30 +02:00
btsimonh c9b5e5ab1f
Add new webcam driver over latest dev. (#19280) 
* Add new webcam driver over latest dev. To use the old one, define USE_WEBCAM_LAGACY

* enable build without RTSP.
check pin_pwdn before using it n 0x105!!!

* more fixes around pwdn.  Make wcresolution -1 set the resoltuion setting to 'disbale cam' value (15).

* fix task stop - wait for debug to leave-> prevents guru. pin task to core 0.

* split motion from other code.  Add USE_WEBCAM_MOTION to control inclusion of motion code (big hit). Change from using USE_WEBCAM_LEGACY to USE_WEBCAM_V2

* logging minimisation - behind WEBCAM_DEV_DEBUG
 2023-08-22 08:24:05 +02:00
Theo Arends dd877972be Phase 1 support C2/C6 2023-08-21 17:10:06 +02:00
Theo Arends 37a527696a Phase 1 support C2/C6 2023-08-21 16:18:21 +02:00
Theo Arends 0c3b559630 Phase 1 support C2/C6 2023-08-21 16:00:20 +02:00
Theo Arends 5b3b2a7a62 Changed display invert setting 
Changed display invert setting after tasmota start in uDisplay driver (#19337)
 2023-08-18 11:34:01 +02:00
stefanbode 7927c989c4
fix shutterinvert (#19341) 
* fix shutterinvert

* fix shutterinvert
 2023-08-18 09:02:17 +02:00
Theo Arends 2eaa0fcb67 Update switch comments 2023-08-17 23:28:27 +02:00
Theo Arends b8804cf2a8 Add variables to rules 
Add variables ``%power<1..28>%`` and  ``%switch<1..28>%`` to rules (#19331)
 2023-08-17 15:34:13 +02:00
Paul Blacknell aa097e9034
add: shutdown command for PID controller (#19318) 2023-08-16 11:17:54 +02:00
Theo Arends d9530f32a6 Sync dev with release v13.1 2023-08-15 10:37:54 +02:00
Paul Blacknell be88e701d9
Add commands to allow setting of timeprop parameters (#19310) 
* add: commands to set timeprop settings

* Update my_user_config.h

* fix: properly generated json response to commands
 2023-08-15 09:43:55 +02:00
paulusbrand 877d4250bb
Removes software based no load threshold. (#19302) 
Lowers ADE7953 builtin no load detection threshold to be able to measure 5 watt power levels.
 2023-08-14 10:08:16 +02:00
SteWers f40f4a1947
[DS18x20] Enhance use of aliases (#19026) 
* [DS18x20] Enhance use of aliases

`defineDS18x20_USE_ID_AS_NAME`:
Always show part of the address, even for one sensor
`#define DS18x20_USE_ID_ALIAS`:
The command `DS18Alias` can now be use with alphanumeric aliases, which replace the sensor name

* [DS18x20] change to calloc()
 2023-08-12 14:57:58 +02:00
Paul Blacknell df1a526f02
fix: properly detect device is offline after maximum misses reached (#19298) 2023-08-12 11:32:29 +02:00
Christian Baars b5cc48dd64
ESP32: pass flashmode at build time to macro definition (#19299) 
* pass flashmode at build time to macro definition

* fix 8266 builds
 2023-08-12 11:31:06 +02:00
Paul Blacknell 9eb184c30e
Improvements to PID controller driver (#19285) 
* add: update DEBUG_THERMOSTAT to only control the virtual switch

Also, debug output is still generated but end user can control this debug level 3

* add: debug output of main controller parameters when thermostat enabled

Also, add units for debug outputs added to make them more intelligible

* Update xdrv_39_thermostat.ino

* add: debug message when sensor is detected as not alive

fix: display thermostat number in debug messages

* add: log message prefix string for thermostat

* Update xdrv_39_thermostat.ino

fix: typos in comments
add: debug messages

* add: debug prefix for thermostat

* add: debug prefix added to output lines

* fix: comment typos and small grammatical changes for clarity

* add: debug prefix 'THE' added to debug output

* add:  display PID status and key info on web output

* fix: remove extraneous comments that included unused code fragments

* add: local sensor handling improvements

add: define a local sensor name
add: define the local sensor measurement parameter
add: limit sensor not seen error message to every 60 seconds to avoid flooding the logs
add: include interval since which sensor data was last updated
fix: properly update the maximum interval time so missing sensor data is properly alerted

* Update xdrv_49_pid.ino
 2023-08-10 16:20:06 +02:00
Christian Baars 7544d2f23c
fix IRAM_ATTR specified both in function declaration and definition (#19286) 2023-08-10 12:19:18 +02:00
Paul Blacknell c3fadde3e8
Improvements to thermostat debug output (#19279) 
* add: update DEBUG_THERMOSTAT to only control the virtual switch

Also, debug output is still generated but end user can control this debug level 3

* add: debug output of main controller parameters when thermostat enabled

Also, add units for debug outputs added to make them more intelligible

* Update xdrv_39_thermostat.ino

* add: debug message when sensor is detected as not alive

fix: display thermostat number in debug messages

* add: log message prefix string for thermostat

* Update xdrv_39_thermostat.ino

fix: typos in comments
add: debug messages

* add: debug prefix for thermostat

* add: debug prefix added to output lines

* fix: comment typos and small grammatical changes for clarity

* add: debug prefix 'THE' added to debug output
 2023-08-08 10:55:05 +02:00
Christian Baars 76aa6747a5
more idf5.1 preps: Berry SPI (#19273) 2023-08-06 21:10:36 +02:00
Jason2866 7488ed03f0
Tasmota based on Arduino 3.0.0 (#19270) 2023-08-06 13:44:28 +02:00
s-hadinger 0b3d6fd146
Prepare for Arduino v3 / esp-idf v5 2nd batch (#19265) 2023-08-05 20:34:24 +02:00
Theo Arends e52c6105c6 Bump version to v13.0.0.4 2023-08-05 15:41:12 +02:00
s-hadinger 5c8c7cdfca
Prepare for Arduino v3 / esp-idf v5 (#19264) 2023-08-05 15:11:10 +02:00
usr44 ab9a519d32
Update ru_RU.h (#19214) 2023-08-05 14:52:25 +02:00
stefanbode 959d105413
Change shutterbutton hold behavior with grouptopic (#19263) 
* skip stop on hold if grouptopic

If shutterbutton is defined with a grouptopic send on HOLD, there is no stop on releasing the button. All shutters will move to defined position

* do not stop on hold release if group submitt

If mqtt broadcast is defined on hold then release the hold button will not anymore stop the local shutter. All shutter will move to defined position
 2023-08-05 14:51:56 +02:00
Theo Arends 7c3c3855c4 Fix console Firefox layout 2023-08-05 12:35:03 +02:00
Theo Arends fc798540b7 Fix console min height 2023-08-05 11:56:06 +02:00
s-hadinger 362326f004
Zigbee Berry minor fix and cleaning (#19257) 
* Zigbee Berry minor fix and cleaning

* Fix compilation
 2023-08-05 09:50:39 +02:00
Christian Baars 732e4106b8
add wifitest3 (#19259) 2023-08-04 20:17:36 +02:00
Theo Arends e2c79b45e4 Save some more code bytes 2023-08-04 17:24:05 +02:00
Theo Arends 7736ba8af1 Change console height 
Change console height from default 318 pixels to viewport (#19241)
 2023-08-04 16:11:58 +02:00
stefanbode 6572f0ed39
Fixing SHUTTERINVERT issues (#19243) 
* fix wrong inverted shutter

* fix inverted shutter for esp32
 2023-08-03 11:55:20 +02:00
Vincent de Groot 5e591ef7db
Integrate MAX17043 driver mechanisms in xsns_110 (#19219) 2023-08-03 11:54:41 +02:00
s-hadinger df50a56c25
Fade would fail when the difference between start and target would be too small (#19246) 2023-08-02 17:48:12 +02:00
stefanbode 355b1e3b74
unsigned overflow fixed (#19221) 
fixed overflow on negative value with dimmer 100%
 2023-07-30 15:01:21 +02:00
s-hadinger 2c15cfe4da
Reduced log level for TeleInfo (#19216) 2023-07-29 23:09:03 +02:00
msedv fb45e73384
Four files which used #ifdef EPS8266 instead of #ifdef ESP8266 - which e.g. broke the MFRC522 functionality between 12.5 and 13.x. (#19209) 2023-07-29 16:50:27 +02:00
s-hadinger f2ab3b36a9
Zigbee decode Aqara 0000/FF01 attribute 03 as Temperature (#19210) 
* Zigbee decode Aqara 0000/FF01 attribute 03 as Temperature

* Changed to AqaraTemperature
 2023-07-29 14:19:15 +02:00
stefanbode de3b0a4b00
ensure minimum interrupt time (#19211) 
prevent interrupts <30 micro seconds because sometimes see crashes on esp8266.
esp32 stop of interrupt >30microseconds and < 105microseconds
 2023-07-29 14:15:00 +02:00
s-hadinger 11f056040e
Make TCPStart ip filter more IPv6 friendly (#19199) 2023-07-26 22:52:48 +02:00
s-hadinger 1a91dc441b
Berry improve tasmota.scale_uint() (#19197) 2023-07-26 22:31:22 +02:00
s-hadinger 9f16f09f29
Berry `mqtt.publish` now distinguishes between `string` and `bytes` (#19196) 2023-07-26 19:54:14 +02:00
Theo Arends 978a21240c Update changelogs 2023-07-24 15:30:48 +02:00
Theo Arends 0ddcea9905 Add alternative for PCA9685 
Add alternative for PCA9685 as define PCA9685_V2 (#18805)
 2023-07-24 15:11:20 +02:00
Theo Arends 17cf73595f Refactor MAX17043 driver 
Refactor MAX17043 driver optional enable library (default off providing smaller footprint (-250 bytes)
 2023-07-24 14:28:57 +02:00
Theo Arends f626539c18 Refactor MAX17043 driver 2023-07-24 12:29:43 +02:00
Jason2866 c5be85f443
Update de_DE.h 2023-07-23 14:13:23 +02:00
gemu 994c105bda
fix empty line problem (#19171) 2023-07-23 11:55:01 +02:00
Vincent de Groot 547169c57d
changing reference to xsns109 (#19170) 2023-07-23 11:30:44 +02:00
bovirus 31c3555d4d
Update italian language (#19169) 2023-07-23 09:39:17 +02:00
s-hadinger 6d3aedcafe
Berry SK6812_GRBW crash (#19166) 2023-07-22 21:51:37 +02:00
Theo Arends 421c95a51b Update change logs 2023-07-22 14:55:20 +02:00
Vincent de Groot bc41500d9c
MAX17043 sensor integration (#18788) 
* Restart MAX17043 from the scratch

* revert change

* Changed battery capacity in charge (capacity is the Ah value of the battery, this degrades over time when battery ages)

* merge

* Changing xsns_109 to 110

* fix nr

* removed old xsns109

* Update I2CDEVICES.md

* clean-up usage of Interface
 2023-07-22 13:33:47 +02:00
Theo Arends 973ce106e7 Fix compilation (#19134) 2023-07-22 11:28:23 +02:00
Theo Arends c7a22f175b Update changelogs 2023-07-21 14:55:06 +02:00
Theo Arends b149443691 Fix default battery level 
- Fix default battery level (#19160)
- Bump version to v13.0.0.3
 2023-07-21 14:35:22 +02:00
s-hadinger 758b0237b4
Matter latency improvement for single attribute reads and single commands (#19158) 2023-07-20 21:26:55 +02:00
stefanbode d1a4296867
New DEEPSLEEP topic for HA + Battery Level % support (#19134) 
* New LWT on deepsleep

To allow better integration into HA LWT topic will report details of sleep status:
16:54:04.388 MQT: hm/tele/ESP_3284D1/LWT =
{"Sleep":{"Time":"2023-07-17T16:55:03","Sleep":1689612844,"Wakeup":1689612903}}

* Revert LWT back to non JSON

Send DeelSleep on LWT
Send Deepsleep parameters on topic DeepSleep

* Setting default for batteryLevel

* Enable BatteryPercentSet

Changing the battery level e.g. by rule

* Added Battery % to status message

* added battery_level_percent

* Added battery % support in STATE message

* Enable setting battery level

101 is reserved for power-plug. No battery Level reported

* Setting default for battery Level

101 is reserved for power plug
0..100 normal battery values

* Revert back LWT to Offline

Removed "DeepSleep" LWT status until further decision is made. Current implementation is technical sufficient for HA to detect a battery powered device

* Added discovery message after deepsleep change

* Added discovery for battery and deepsleep
 2023-07-20 09:51:08 +02:00
s-hadinger 3da5124348
Berry add AES CCM decrypting in a single call to avoid any object allocation (#19153) 2023-07-19 21:15:08 +02:00
s-hadinger 2a3690b866
Berry `tasmota.loglevel()` and `tasmota.rtc_utc()` for faster performance (#19152) 2023-07-19 20:58:50 +02:00
s-hadinger 91f15d228b
Zigbee DIYRuZ_Geiger (#19151) 2023-07-19 20:41:49 +02:00
sfromis 6382c2806c
More user-friendly defaults for DisplayMode and DisplayDimmer (#19138) 
Changing default for DisplayMode from 1 to 0. Users are getting confused by the display doing something they did not ask for (and not being aware of DisplayMode). This got worse with LVGL/HASPmota displays becoming common, with users having much less reason to dive into the old DisplayXxxxx commands. And it may even be hard to see that it is even a display of time/date causing the display to flicker.

Changing default for DisplayDimmer from 10% to 50%. The low brightness of 10% is not always easy to see, especially in daylight. 50% is generally better, while not going "full blast" with 100%.
 2023-07-18 08:26:51 +02:00
s-hadinger ada754c582
Berry add `energy.update_total()` to call `EnergyUpdateTotal()` from energy driver (#19117) 2023-07-15 17:06:10 +02:00
stefanbode ebca2f0a07
Zero-Cross Dimmer fixes (#19109) 
* Fix Zero-Cross flickering on Savedata

* Fix reboot on DIMMER usage with Zero-Cross

* Fix Flickering on dimmer 0
 2023-07-14 09:10:20 +02:00
Theo Arends 9638beacec Fix possible buffer overflow 2023-07-12 12:45:02 +02:00
Theo Arends 5b6a25a7a0 Fix driver config backup and restore 
Fix driver config backup and restore (#18295)
 2023-07-12 10:52:58 +02:00
Theo Arends 889e6ea54d Fix driver config restore 2023-07-11 16:12:04 +02:00
Theo Arends 258976c014 Verify correct functionality 2023-07-10 18:14:23 +02:00
Theo Arends 43bc81010f Configuration file save and restore .xdrvsetXXX 
Configuration file save and restore now backup and restore ``.xdrvsetXXX`` files too (#18295)
 2023-07-10 16:03:32 +02:00
btsimonh b1cc87d24f
File UI changes (#19014) 
* Remove recursion into folders on Manage Files.  May be enabled with UFILESYS_RECURSEFOLDERS_GUI.  On Edit of a file, Save and Magane btuttons return to the folder containgint the file being edited.  On delete file, UI returns to the folder that the deleted file was in.

* Make newfile put in in the current folder, and return to current folder on save of manage button.

* Add folderOnly and FileOnly functions to reduce code duplication.
Enable folder delete.
Enable folder listing to be aborted (x in browser)
Disbale ESP32 Download Task.  Needs attention.
Allow folder create from newfile name.
 2023-07-10 10:27:20 +02:00
Theo Arends 05d589f2d7 Set ESP32-C3 max supported ADC channels to 5 2023-07-08 18:04:13 +02:00
Theo Arends ac4c4505a5 Bump version v13.0.0.2 
Update changelogs
 2023-07-08 17:37:12 +02:00
Theo Arends f726c904ab Enable ESP32 shutter driver 
Enable ESP32 shutter driver (#18295)
 2023-07-08 17:21:06 +02:00
gemu d9d9ca2651
fix modbus-tcp, add U32,U64 etc (#19063) 2023-07-07 19:50:51 +02:00
stefanbode 8ce7cb4ccd
Enhance ZC-Dimmer for falling and leading edge dimmer (#19054) 
* Update tasmota_types.h

* Update xdrv_68_zerocrossDimmer.ino
 2023-07-07 19:50:36 +02:00
s-hadinger 57c4825ccd
`BrRestart` now supports web handlers to work after Berry restart (#19057) 2023-07-06 21:37:46 +02:00
xsp1989 862edddb56
Fix BUG: Zigbee devices cannot be added through routing nodes (#19036) 2023-07-06 21:10:57 +02:00
s-hadinger f56307e321
Fix to Partition_Wizard for shelly (#19056) 2023-07-06 20:59:50 +02:00
MIzzzzon f462fa772d
Create GC9A01_display.ini (#19043) 2023-07-06 16:05:38 +02:00
s-hadinger 492759567a
Partition Wizard is now able to convert to safeboot from Shelly partition layout (#19034) 2023-07-05 09:55:17 +02:00
Theo Arends 522e6cf234 Implement deepsleep(0) 
Implement deepsleep(0) as command ``restart 9`` (#19024)
 2023-07-03 21:07:45 +02:00
Theo Arends fc9065d4c8 Fix miel_hvac 
Fix miel_hvac (#18923)
 2023-07-03 11:55:21 +02:00
s-hadinger d72f3b9978
Command ``BrRestart`` to restart the Berry VM (experimental) (#19003) 
* Command ``BrRestart`` to restart the Berry VM (experimental)

* Add web button for Berry Restart
 2023-07-02 21:52:01 +02:00
Theo Arends 85aed3a17d Remove phase_count_virtual 2023-07-01 14:31:03 +02:00
Theo Arends 139ac367f0 Add support for energy dummy relays 
Add support for energy dummy relays using SO48
 2023-07-01 14:25:05 +02:00
Theo Arends 6dd8aabeef Cleanup scripter logging 2023-07-01 14:04:27 +02:00
Theo Arends 3edb5bb096 Move SD card init up 
Move SD card init up (#18934)
 2023-07-01 12:48:33 +02:00
Jacek Ziółkowski 2705374160
add Energy.phase_count_virtual to berry energy module (#19004) 
* add Energy.phase_count_virtual to berry energy module

* Update xdrv_52_3_berry_energy.ino

* Update xdrv_52_3_berry_energy.ino
 2023-06-30 22:19:59 +02:00
Theo Arends ad404dfc0c Allow disable of frequency 
Allow disable of frequency in dummy driver
 2023-06-30 11:55:48 +02:00
Theo Arends 1e3b41dd2d Fix PCF8574 mode2 init using scripts 
Fix PCF8574 mode2 init using scripts (#18934)
 2023-06-30 11:37:20 +02:00
Theo Arends 58e13edea0 Change loglevel message 2023-06-30 11:31:59 +02:00
Theo Arends ca452c5e43 Add Energy->phase_count_virtual 2023-06-30 11:14:37 +02:00
Theo Arends 465ae023ab Update change logs 2023-06-29 14:10:49 +02:00
Andrew Klaus eb655a4a8f
Add support for SGP41 TVOC/NOx Sensor (#18880) 
* Initial support for SGP41

* Removing delay() use from SGP4x driver

* Using i18n for TVOC/NOx raw values as well
 2023-06-29 09:04:08 +02:00
Theo Arends 504b51a9b4 Add command ``Delay -1`` 
Add command ``Delay -1`` to wait until next second (#18984)
 2023-06-28 11:53:23 +02:00
jonschz a51096e400
update light when `VirtualCT` is invoked (#18972) 
Co-authored-by: jonschz <jonschz@users.noreply.github.com>
 2023-06-27 14:23:44 +02:00
Paul Blacknell 7892a38795
add HybridControllerPhase to json payload (#18842) 2023-06-26 21:56:07 +02:00
p2122 6ebd447bf2
Add files via upload (#18957) 2023-06-26 20:22:21 +02:00
Theo Arends 0930bbddf5 Fix ESP32 Matter support 2023-06-26 12:38:29 +02:00
Theo Arends d9a66547aa Bump version v13.0.0.1 2023-06-26 11:12:31 +02:00
s-hadinger 339c1cedb7
Zigbee firmware for Sonoff-ZB-Pro v20230507 (#18968) 2023-06-25 21:24:08 +02:00
Christian Baars 99a0f2add1
MI32 legacy: Allow submitting WiFi credentials via BLE using Berry (#18962) 2023-06-25 14:31:04 +02:00
gemu 3642d8ef37
fixes TS_FLOAT (#18961) 2023-06-25 12:08:42 +02:00
Jason2866 b419ae3a92
add matter as a default option in most env (#18942) 2023-06-24 11:39:26 +02:00
s-hadinger 36de007909
Berry replace `string.format`with `format` (#18945) 
* Berry replace `string.format`with `format`

* remove import.string
 2023-06-23 18:33:31 +02:00
Norbert 04521e5542
Change format of KNX Group address (#18928) 
"%d.%d.%d" -> "%d/%d/%d"

Co-authored-by: Norbert <Noschvie@users.noreply.github.com>
 2023-06-22 21:56:55 +02:00
Ian Anderson 635e240293
Update Tuya_ZG-204ZL.zb (#18922) 
Added in mapping for battery level on ZG-204ZL
 2023-06-21 10:33:39 +02:00
Norbert Richter 1f5c1baeae
Fix NeoPool NPFiltration switch result (#18871) (#18908) 2023-06-19 22:53:51 +02:00
Jacek Ziółkowski 5059a11b9f
Add entry for Growatt 12KTL-3S (#18898) 2023-06-18 20:26:42 +02:00
s-hadinger 28861821a6
Zigbee fixed regression with SetOption101 (#18884) 2023-06-14 22:46:18 +02:00
stefanbode 156a3551b0
Repair SHUTTER Shelly 2.5 with manual relay change on switches (#18877) 
* Repair manual relay change

* Repair manual relay change
 2023-06-14 16:14:10 +02:00
s-hadinger 69b2b93d61
Matter UI and logs polishing (#18866) 2023-06-12 19:45:18 +02:00
stefanbode 0e3b32e848
Readded up/down/open/close commands (#18864) 
* Update xdrv_27_shutter.ino

* fix shutterposition with up/down/open/close
 2023-06-12 19:09:19 +02:00
Subhash Chandra 2f616eef2c
make IRHVAC send incremental changes. (#18310) 
This change will allow mqtt messages simpler by allowing something like
`publish cmnd/ir-bridge/IRHVAC {"Power": "On"}`.
The simpler format is required for working with mqtt clients like
iotMQTTPanel or similar on android.

Limitations:
- Requires full message be sent at-least once. I work around this with
   a `system#boot` rule
- Gets messy with multiple devices. I have only one AC per room, and
  this doesn't doesn't interfere with other IR devices.

TODO:
- [ ] Change the build flag `INCREMENTAL_IRAC`to a `SetOption`
- [ ] Persist `irac_prev_state` across reboots.
- [ ] Support multiple devices.
 2023-06-10 14:53:02 +02:00
btsimonh 63cc575c8b
Berry Webclient: Change StreamBytes to StreamBeBytesWriter, and improve wc_getbytes (#18837) 
This reduces allocation to a single allocaiton, but also theroetically allows the Bytes object to grow if content-length was unset.

(cherry picked from commit 936477f5977dd1a4f899498cc7cc0baf05b34a89)
 2023-06-10 11:28:31 +02:00
Barbudor 6aed929e17
fix #18817 http response for status with retain (#18819) 
* fix http response for status with retain

* take 2

* add a failsafe when JSONlen reach zero
 2023-06-09 07:59:24 +00:00
btsimonh fc92dc0995
Add wcclient.get_bytes() to Berry (#18829) 
(cherry picked from commit 5903b21448a3f088b12bd47a04996ff84e467a3a)
 2023-06-09 08:56:05 +02:00
blakadder 676165f3f6
better way to support LSBJ (#18827) 2023-06-08 20:39:02 +02:00
blakadder ae67c6cfa1
Add support for INMP441 MEMS microphone (#18823) 
* Add INMP441 MEMS mic support

* add I2S audio defines as preview
 2023-06-08 16:24:44 +02:00
blakadder 5a8f13d57f
Pdm_mic (#18807) 
* add I2S LSB flag

* add support for PDM microphones
 2023-06-07 12:34:44 +02:00
Norbert a19079b2ec
Fix spelling. (#18799) 2023-06-06 10:21:12 +02:00
blakadder 24233924c5
add I2S LSB flag (#18793) 2023-06-04 23:01:46 +02:00
s-hadinger 844caf51f9
Fixed HASPmota event when value is non-integer (fixes #18229) (#18791) 2023-06-04 20:06:04 +02:00
s-hadinger 61f17221d0
Berry simplify I2S implementation (#18778) 2023-06-02 16:36:09 +02:00
s-hadinger f8df9e5f00
Berry `webclient.url_encode()` is now a static class method, no change required to existing code (#18775) 2023-06-02 13:29:57 +02:00
Theo Arends 4e7475dbd4 Bump version v12.5.0.4 2023-06-02 10:25:02 +02:00
jonschz 9d57a19be3
Fix interaction of `SO92`, `VirtualCT`, and `RGBWWTable` (#18768) 
* remove unused variable

* Relocate SO92 implementation
This way, SO92 does not ignore SO106

* Relocate RGBWWTable implementation
This fixes a bug related to RGBWWTable and SO92.
Also, the code is tidier this way

* Cleanup: Reduce code duplication

* more consistent behaviour for SO92 and free_cw

---------

Co-authored-by: jonschz <jonschz@users.noreply.github.com>
 2023-06-01 22:12:57 +02:00
s-hadinger b9d855ef79
Berry RS256 crypto algorithm (RSASSA-MCKS1_v1-5 with SHA256) used for JWT (#18763) 2023-06-01 10:02:23 +02:00
s-hadinger 3c75bc92a2
Zigbee Berry mapping fix attributes (#18747) 2023-05-29 23:05:45 +02:00
s-hadinger 3f094c9be1
Display descriptor for ST7735 128x160 display (#18741) 2023-05-29 18:50:03 +02:00
Theo Arends 07b7a7ee9a Fix initial ESP32 Energy kWh total time 2023-05-29 16:19:55 +02:00
Theo Arends bf2982854b Fix #18737 2023-05-29 14:21:33 +02:00
s-hadinger fe570a1b26
Matter Border Router for ESP8266 (experimental) (#18734) 2023-05-29 10:40:24 +02:00
Jason2866 7b55e1aca2
Make `USE_DISPLAY_MODES1TO5` in firmware `LVGL` possible (#18729) 
* Make `USE_DISPLAY_MODES1TO5` in firmware `LVGL` possible
 2023-05-27 17:00:14 +02:00
Theo Arends d91e1e8bcc Fix berry scheme select 2023-05-27 12:33:50 +02:00
Theo Arends e87714dbcd Add TODO 2023-05-26 17:51:20 +02:00
Theo Arends fcf3477165 Initial support for WS2812 scheme 14 2023-05-26 17:47:57 +02:00
s-hadinger 6fa22aae6b
adjust neopixel busy time (#18723) 
* adjust neopixel busy time

* Adjust time for Berry
 2023-05-25 19:21:18 +02:00
Theo Arends e05d75248e Add undocumented feature 2023-05-25 17:13:31 +02:00
Barbudor 75f634dc71
freeze readings before deepsleep (#18720) 2023-05-25 12:20:30 +02:00
Theo Arends d0e88c9dae Fix BusyDelay WS2812 2023-05-24 17:24:48 +02:00
Theo Arends fc67cca8b4 Add generic SystemWaitIfBusy() to fix WS2812 led flicker 
Add generic SystemWaitIfBusy() to fix WS2812 led flicker
 2023-05-24 16:21:59 +02:00
Theo Arends 4be618fe7b Fix WS2812 string distortions during analogRead() 
Fix WS2812 string distortions during analogRead()
 2023-05-24 15:09:26 +02:00
Theo Arends 10f9c20078 Fix ESP32 SPI initialization for MFRC522 
Fix ESP32 SPI initialization for MFRC522 (#18711)
 2023-05-23 14:34:47 +02:00
gemu 242eb3074a
fixes and enhancements (#18718) 
* onewire fixes, webui radiobuttons

* fix regression
 2023-05-23 11:30:59 +02:00
gemu e969bf0e0e
optional prefix size and serial invert (#18717) 2023-05-23 08:46:00 +02:00
Theo Arends 44b33281b6 Even more bling bling 2023-05-22 16:21:50 +02:00
Theo Arends 9a88677122 More AS608 bling bling 
More AS608 bling bling (#18163)
 2023-05-22 12:42:24 +02:00
Theo Arends 80afc8793f AdafruitFingerprint library from v2.0.4 to v2.1.0 
AdafruitFingerprint library from v2.0.4 to v2.1.0 (#18163)
 2023-05-22 11:48:03 +02:00
Theo Arends 22abc8ad99 Fix ESP32 InfluxDb initial connection delays 
Fix ESP32 InfluxDb initial connection delays using HTTPClient (#18015)
 2023-05-21 16:21:43 +02:00
Theo Arends ae518424bc Add IPv4 DNS lookup to influxdb 
- Add IPv4 DNS lookup to influxdb (#18015)
- Add response to influxdb send
 2023-05-21 15:34:36 +02:00
stefanbode a76ebaae48
Shutter continuous improvement (#18701) 
* Update xdrv_27_esp32_shutter.ino

* Update xdrv_27_shutter.ino

* Update xdrv_01_9_webserver.ino

* Update xdrv_12_discovery.ino

* shutterinvert

removed slider display to driver
fix wrong invert display

* codereduction+refactor slider

removed webui slider into driver
optimized code

* update slide, fix invert shutters

- refactor sliders into driver
- fix percent calculation on iverted shutters

* fix on realpercent if inverted shutter

* fix ShutterPercentToRealPosition

fix on inverted shutter

* added shutter to bootloop reset

* bugfix integration

* bugfix
 2023-05-21 12:25:11 +02:00
Bernhard Urban-Forster d5ad79985b
haas: sync shutter discovery and fix for more than 4 shutter (#18694) 
* discovery: hoist shutter computation out of loop

* haas: sync shutter discovery and fix for more than 4 shutter
 2023-05-20 09:06:56 +02:00
Ian Anderson 63a83c7289
Added quirks file for Tuya_ZG-204ZL (#18693) 2023-05-20 07:51:46 +02:00
Theo Arends f5d6578fb5 Fix correct JSON display of WifiPower float 2023-05-19 17:41:18 +02:00
Theo Arends 4afcdc11d6 Simplify Berry Mute option 2023-05-19 16:30:48 +02:00
Theo Arends 77103baa0a Add internal support for max log level 2023-05-19 15:20:21 +02:00
s-hadinger 043ea2986b
Berry `tasmota.wifi()` would wrongly report wifi as up (#18687) 
* Berry `tasmota.wifi()` would wrongly report wifi as up

* Fix ESP8266 compile

* Fix display of IP in wifiman

* Improve wifiman IP handling for IPv6
 2023-05-18 11:23:09 +02:00
s-hadinger 2b76e8e668
HASPmota `meta` attribute and improved `berry_run` (#18685) 2023-05-17 21:40:05 +02:00
Theo Arends 4a7e4f9a17 Refactor dynamic wifi tx power 2023-05-17 11:44:14 +02:00
Theo Arends 57f85ae478 Optimize dynamic WiFi power 2023-05-17 10:45:00 +02:00
stefanbode 4d131fd543
zero-cross dimmer cleanup (#18674) 
removed zero cross dimmer initialize
 2023-05-17 08:54:22 +02:00
stefanbode adff41f962
bugfix (#18673) 2023-05-16 22:34:07 +02:00
Theo Arends 0385204ca7 Add command ``WifiPower 0`` 
Add command ``WifiPower 0`` to enable dynamic wifi power based on RSSI by @TD-er (#15443)
 2023-05-16 18:55:55 +02:00
btsimonh f8b26a90f6
Add mutex to many camera functions. (#18655) 
* Add mutex to many camera functions.

* Allow stream to continue after wcinit command (and other commands which reconfigure).

* Adust retries on camera init, specifically log success if it retried.
Shorten messages to save rom.
I have seen fail of 0x103 and 0x20002 succeed on second try.
 2023-05-16 12:21:25 +02:00
s-hadinger 81d7785f66
LED PWM ac_dimmer curve was wrongly applied instead of Gamma (#18666) 2023-05-15 22:51:14 +02:00
s-hadinger 98bfc172c1
Zigbee support for air sensors (#18665) 
* Zigbee support for air sensors

* ppm
 2023-05-15 22:04:13 +02:00
Theo Arends 9b8f3b6b4c Add command I2CScan0 
Add command I2CScan0 to scan both busses if available
 2023-05-14 15:21:19 +02:00
Theo Arends f1a9a0b45b Add support for PCA9557 
Add support for PCA9557 8-bit I/O expander (#18632)
 2023-05-14 15:08:09 +02:00
Theo Arends 26508e55fc Merge branch 'development' of https://github.com/arendst/Tasmota into development 2023-05-14 14:42:23 +02:00
Theo Arends 7cad4f95b6 Enable I2c on webcam 2023-05-14 14:42:11 +02:00
CCTweaker 885737a1fd
Add support for PCA9557 8-bit IO expander (#18632) 
* add PCA9557 driver

* text correction

* added switches and buttons

* update max devices to 8

* cleanup
 2023-05-14 14:19:39 +02:00
Jeroen f860722eba
Added Endianess Parameter (#18650) 
https://github.com/arendst/Tasmota/discussions/18244

Co-authored-by: JeroenSt <nospam@nospam.org>
 2023-05-14 14:18:45 +02:00
Jason2866 0bf27e70fe
fix logic when init cam was successful (#18653) 2023-05-14 14:08:53 +02:00
Theo Arends 86979646ff Energy power delta report delayed 
Energy power delta report delayed by two seconds allowing hardware to stabilize (#17751)
 2023-05-11 18:10:52 +02:00
Christian Baars 79a826a206
Update xdrv_81_esp32_webcam.ino (#18637) 2023-05-11 09:28:33 +02:00
f-reiling 3a6cd9b63c
start modus tcp bridge automatically (#18634) 
* added default port for modbus tcp bridge to start automatically

* updated ifdef style

* renamed define for modbus default port
 2023-05-10 14:38:52 +02:00
Jason2866 3c951d7751
fix GT911 crash in LVGL firmware (#18633) 
* fix GT911 crash

* remove wrong frag when using GT911
 2023-05-10 14:02:51 +02:00
Jason2866 64e844d387
Disable crashing GT911 driver (#18631) 2023-05-10 11:28:59 +02:00
Jeroen 632176765d
Added define to adjust calibration precision. (#18613) 
Co-authored-by: JeroenSt <nospam@nospam.org>
 2023-05-10 09:38:27 +02:00
TID bef49b4617
Update polish language (#18615) 2023-05-10 09:36:54 +02:00
Mateusz Bronk 6a7b2b0c6e
IR: Extended the A/C protocol with Command/iFeel/SensorTemp (#18612) 
* IR: Added support for new A/C protocol fields

New fields introduced in IRremoteESP8266 v2.8.5:
1. Command (one of: [Control | Config | iFeel | Timer], default: Control) - allows to set IR command type (e.g. iFeel for no-beep ambient sensor report)
2. iFeel (boolean, default: false) - configures whether iFeel (ambient sensor temp. is used by the A/C unit)
3. SensorTemp - the ambient sensor temperature reading to send

Note:
 - Fan setting via int is now 6-value (breaking change -> 6 is the new max)

* IR A/C: Model now pretty-printed to JSON

Model string is the default (falls back to int if n/a)

* IR A/C: Added separate JSON resp. per command type

* No change for "kControlCommand" (default/legacy).
* SensorReport/Timer/Config commands only contain relevant JSON nodes

Additionally:
 Clock has time semantics (input: minutes, output: HH:MM), except for "config" mode,
 where state.clock is used as ConfigKey and state.sleep is used as ConfigValue.

---------

Co-authored-by: Mateusz Bronk <2566147+mbronk@users.noreply.github.com>
 2023-05-09 21:35:56 +02:00
SteWers be27b4c488
Update de_DE.h (#18621) 2023-05-09 20:12:24 +02:00
Theo Arends 6fe1bbd617 Update changelogs 2023-05-08 15:10:15 +02:00
Jeroen 45eb82bc3f
Fix for not sending changes to mqtt (#18600) 
Co-authored-by: JeroenSt <nospam@nospam.org>
 2023-05-08 09:59:28 +02:00
Jeroen 6cb92ffe49
Fix for aligment at displayfloat command (#18601) 
* Fix for wrong aligment at displayfloat command

* Added alignment parameter to prevent regression

---------

Co-authored-by: JeroenSt <nospam@nospam.org>
 2023-05-08 09:58:26 +02:00
bovirus cdc6ba7c96
Update italian language (#18605) 2023-05-08 09:57:13 +02:00
Christian Baars cf60e34578
fix webcam init for some cases (#18606) 
Co-authored-by: Christian Baars <christianbaars@MacBook-Pro-von-Christian.local>
 2023-05-08 09:57:00 +02:00
Theo Arends da5396a080 Add filesystem size to esp8266 GUI 2023-05-07 17:25:18 +02:00
Theo Arends 91523fd90b Add GM861 optional heartbeat 2023-05-07 16:01:33 +02:00
Jason2866 eccc1af0a2
disable SHT pig on i2c / add missing GT911 defines (#18595) 
* disable SHT pig on i2c / add missing GT911

* GT911 missing in config
 2023-05-07 15:32:15 +02:00
gemu a46b926530
fix i2c touch init (#18594) 2023-05-07 14:48:49 +02:00
Theo Arends 0287291cd9 Add GM861 optional AIMId decode 2023-05-07 14:11:29 +02:00
Theo Arends e9d1e8c725 Change command FileUpload binary index 2023-05-06 18:09:11 +02:00
Theo Arends b9464a21a8 GM861 add support for AIM 2023-05-06 17:18:52 +02:00
stefanbode 25e55ae073
#18548 fix shuttersetup (#18586) 
- code optimization
- shuttersetup reluctant on relay to energy measure relation
 2023-05-06 15:46:29 +02:00
s-hadinger 8b2539a35a
Partition_Manager.tapp fixed (#18588) 2023-05-06 12:18:12 +02:00
Theo Arends d7b6d72e19 Add support for GM861 
- Add support for GM861 1D and 2D bar code reader (#18399)
- Bump version to v12.5.0.2
 2023-05-05 16:50:19 +02:00
s-hadinger 069278f966
Berry add `tcpclientasync` class for non-blocking TCP client (#18584) 2023-05-05 15:13:22 +02:00
gemu 687b26ad13
Scripter update (#18578) 
* add ds2480b library

* add onewire support

* reset on error

* call to get esp32 HWS

* DS2480 serial invert option
 2023-05-05 09:17:17 +02:00
s-hadinger c26ec44407
Matter POC for remote Relay (#18575) 2023-05-03 23:03:01 +02:00
stefanbode 9097f508fd
BugFix Garage + new shutterbuttons options (#18572) 
* Fix GarageMode movements

* BugFix Garage + new shutterbuttons options

- Removed logging
- shutterbuttons support incremental change
- garage mode, fix #18539 and fix #18442
 2023-05-03 21:44:09 +02:00
s-hadinger 3fa42072b1
Fix HASPmota demo for the new Berry rule engine (#18570) 2023-05-03 17:33:21 +02:00
stefanbode c498995f79
Update xdrv_68_zerocrossDimmer.ino (#18556) 
* Update xdrv_68_zerocrossDimmer.ino

* Address IRAM issue report

removed some IRAM from ESP8266. Further improvement to ESP32 as soon as measurement is available.
 2023-05-02 15:53:17 +02:00
Theo Arends cda2bf157d Add support for TC74 
Add support for TC74 temperature sensor by Michael Loftis (#18042)
 2023-05-01 16:26:07 +02:00
Jeroen 616652ea22
Added support for Dingtian Relay Board v3.6.10 (#18535) 
* Added support for Dingtian Relay Board v3.6.10

* Output OE was never initialized

* Removed white spaces trying to fix language builds

* Fix for https://github.com/arendst/Tasmota/pull/18535#pullrequestreview-1406978097

* Fixed language builds

---------

Co-authored-by: JeroenSt <nospam@nospam.org>
 2023-05-01 14:51:02 +02:00
Jeroen c5612a50fb
Fix for https://github.com/arendst/Tasmota/discussions/15703#discussioncomment-5713294 (#18534) 
Added and fixed comments

Co-authored-by: JeroenSt <nospam@nospam.org>
 2023-04-29 14:46:38 +02:00
Tim L 1d0c19311d
Add support for WT32_SC01 Plus display (#18538) 2023-04-29 14:45:10 +02:00
stefanbode 17d1d7f5fa
Update xdrv_68_zerocrossDimmer.ino (#18532) 2023-04-28 17:33:12 +02:00
bovirus d206de52f1
Italian language update (#18531) 2023-04-28 08:38:46 +02:00
Theo Arends f86bc7d8ab Prep GM861 2023-04-27 17:44:33 +02:00
Theo Arends 53bd49ddcd Remove USE_ARDUINO_OTA from ESP32 2023-04-27 16:35:47 +02:00
Jason2866 c33472d9b6
ArduinoOTA support only ESP8266 (#18528) 
* ArduinoOTA support only ESP8266

* add comment ArduinoOTA
 2023-04-27 14:19:27 +02:00
stefanbode 60855bf367
Enabled ZCDimmerSet for ESP8266 (#18518) 
* Enabled ZCDimmerSet for ESP8266

- Increased interrupts time to get stablity. Savedata issue is gone. 
- Increased accuracy to trigger an on sinus curve.
- Enabled high resolution trigger ZCDimmerSet for ESP8266

* Update xdrv_68_zerocrossDimmer.ino
 2023-04-27 08:03:00 +02:00
s-hadinger 6702321784
Matter shutter with tilt (#18525) 2023-04-26 22:53:26 +02:00
Jeroen ee9d086aba
Solved: ModbusBridge reading int16 returns uint16 (#18524) 
https://github.com/arendst/Tasmota/issues/18522

Co-authored-by: JeroenSt <nospam@nospam.org>
 2023-04-26 22:27:53 +02:00
stefanbode afbdb3d54f
Added TILTCONFIG to status13 message for MATTER support (#18512) 2023-04-26 11:39:59 +02:00
stefanbode bec24baa75
Changes JSON message to actual position and not outdated (#18502) 
* Report actual position in JSON

* Update xdrv_27_shutter.ino

* Update xdrv_27_esp32_shutter.ino

* copy&paste error
 2023-04-26 08:39:49 +02:00
Christian Baars f6763eb37b
Berry: add BLE server/advertiser (#18494) 2023-04-26 08:39:29 +02:00
stefanbode 39abde2583
Worked on ESP32 dimmer with Zero cross (#18481) 
* Worked on ESP32 dimmer with Zero cross

Until now the ESP32 does not support zero-cross dimmer. I take a sneak how they did in in ESPhome and adapted the approach to TASMOTA. At the end it works that smooth that likely i will change ESP8266 either so we have a common code. Currently ESP8266 is not touched.
There is a minor issue with savedata == default. When changing the dimmer value the interrupts get stopped during write of the config data to flash.

* ESP8266 Dimmer added

Worked all so well and the code is much smaller. There is no need for reconfiguration on existing users. But there are settings not needed anymore. Will work on the documentation. Anyhow existing installations can upgrade without hickup

* Optimized endpoints at dimmer 0 and 100

* Removed debug stuff

* Fix Issue at dimmer = 0

* Small bugfix

* Final checked Version

* Update xsns_01_counter.ino

* Add missing func

* Update xsns_01_counter.ino

* Moved out of the house of counter and build my own one

* New ZeroCross Driver

* Update xdrv_91_zerocrossDimmer.ino

* evolving

* Delete xdrv_91_zerocrossDimmer.ino

* Add files via upload

* Changed drv number from 1 to 68

* Commit to merge
 2023-04-25 13:46:19 +02:00
Jason2866 98cad1a192
Create ST7735S_Air101-LCD_display.ini 2023-04-24 16:53:37 +02:00
Theo Arends c1db67ce37 Refactor GDK101 driver 2023-04-23 18:09:33 +02:00
Felix Laevsky 21bb822dec
Fix for ModuleAddress command (#18490) 2023-04-23 10:51:00 +02:00
gemu 799ba675eb
add xpt2046 option for spi bus 2 (#18480) 
* allow spi bus 2

* xpt spi bus 2

* xpt option bus

* xpt option spi bus 2

* exclude c3

* exclude s2

* fix s3

* typo
 2023-04-23 10:19:31 +02:00
Theo Arends 5a2266289e Update Sievert 2023-04-21 16:55:09 +02:00
Jason2866 11a43ea99b
Tasmota Core 208 (#18460) 
* Tasmota Core 2.0.8
* Fix Linker errors
 2023-04-20 20:01:35 +02:00
s-hadinger b235dffb29
Fix Berry hue_bridge (#18459) 2023-04-19 23:45:05 +02:00
Theo Arends 9f77cfd890 Fix single pin latching relay power on state 
Fix single pin latching relay power on state (#18386)
 2023-04-19 16:17:04 +02:00
InHi66 eb40496e4b
Update xsns_20_novasds.ino (#18444) 2023-04-18 17:20:47 +02:00
Theo Arends 6f6c43a724 Add command ``SetOption152 0/1`` 
Add command ``SetOption152 0/1`` to select two (default) or one pin bistable relay control (#18386)
 2023-04-18 17:16:29 +02:00
Theo Arends 2684141722 Fix ESP8266 Energy Export Active 
Fix ESP8266 Energy Export Active no update regression from v12.3.1.3
 2023-04-18 15:34:19 +02:00
Theo Arends 05f6bcf211 Bump v12.5.0.1 2023-04-17 10:10:55 +02:00
s-hadinger e2e142f289
Zigbee fix compilation for future core (#18432) 
* Zigbee fix compilation for future core

* More fixes for ESP32
 2023-04-16 23:16:28 +02:00
Theo Arends 96f6f69f13 Increase TasmotaClient receive buffer 
Increase TasmotaClient receive buffer from 100 to 250 (#18427)
 2023-04-16 14:39:29 +02:00
Theo Arends e158b181d6 Add SDM72D_M config 2023-04-16 13:52:10 +02:00
ferix98 2a8b859e37
Added I2SRtttl command (#18423) 2023-04-16 12:04:22 +02:00
Theo Arends 1e571e1d14 Update templates 2023-04-15 14:58:21 +02:00
bovirus ae5dd61b8a
Update Italian language (#18415) 2023-04-15 12:16:54 +02:00
Theo Arends c2a6dd81e8 Fix ESP32 energy monitoring set StartTotalTime 
Fix ESP32 energy monitoring set StartTotalTime regression from v12.3.1.5 (#18385)
 2023-04-14 17:42:31 +02:00
Theo Arends e07efd625f Add support for GDK101 gamma radiation sensor by Petr Novacek (#18390) 2023-04-14 16:50:54 +02:00
Szewcson 4fdd1ad94d
Ftlab gdk101 Gamma Radiation Sensor Module support (#18390) 
* Support for GDK101.

* GDK101 driver rework

---------

Co-authored-by: PetrNovacek <39201428+r21m@users.noreply.github.com>
 2023-04-14 15:29:00 +02:00
Theo Arends d88d42341d Fix future compile error 2023-04-14 12:01:47 +02:00
stefanbode 3da96a55d5
Fixes and enhancements autosetup from testbench (#18405) 2023-04-13 21:56:35 +02:00
Barbudor 870874d181
fix display of adcparam param4 for ct (#18397) 2023-04-13 09:04:17 +02:00
stefanbode 6d9beb5d79
autosetup of shutters for shelly devices (#18393) 
* New autocallibration and setup for shelly devices

* setup command
 2023-04-12 09:39:48 +02:00
stefanbode 1c0936c6d5
fix setting migration issue (#18383) 
* fix setting migration issue

* next try to fix migration issue

@arendst: I saw you made also some changes to the xdrv122. I copied this and it looks like setting the crc32 was the root of the issue. You removed it and I do the same now. Looks much better.
 2023-04-11 08:17:55 +02:00
s-hadinger 6007f2d970
Berry `webserver.html_escape()` reusing the internal HTML escaping function (#18381) 2023-04-10 19:16:01 +02:00
s-hadinger 3354e2acbf
Matter log unknown opcodes (#18379) 2023-04-10 16:20:11 +02:00
gemu f06104b0b7
Scripter update (#18374) 
* bug fixes and enhancements

* tcp reconnect
 2023-04-10 10:04:00 +02:00
Barbudor 52060259ce
improve ADC_CT (#18369) 2023-04-08 21:31:50 +02:00
stefanbode 86be6c8a3d
Additional limit check on tilt changes (#18364) 
* limit check on tilt position

* limit check on tilt changes
 2023-04-08 09:40:38 +02:00
Theo Arends 545c6a3511 Refactor saving some bytes 2023-04-07 13:03:20 +02:00
Theo Arends 4f983105f3 Allow compound commands in json command 
Allow compound commands in json command (#18358)
 2023-04-07 12:36:02 +02:00
bovirus 97993934f2
Italian language update (#18352) 2023-04-07 09:13:18 +02:00
Anton ACE d8bdcebc78
xsns_105_lox_o2: LOX-02 Oxygen sensor support (#18333) 
* xsns_105_lox_o2: LOX-02 Oxygen sensor support

* strtof removed, ConvertTemp added
 2023-04-06 09:52:15 +02:00
Paul Blacknell 1be4d15f65
add: include EmergencyState in Thermostat sensor json payload (#18344) 2023-04-06 09:50:37 +02:00
Theo Arends 9c6fdc7027 Sync discoveries 2023-04-05 14:06:43 +02:00
stefanbode afd22b5b42
fix #18331 (Wrong discovery on ESP32_shutter (#18334) 
* fix ESP32_shutter wrong discovery

* fix wrong discovers on ESP32 shutter

* fix wrong discovers on ESP32_shutter

* Update xdrv_12_discovery.ino
 2023-04-05 13:47:12 +02:00
stefanbode b287d05098
Enable motordelay for tilt operations (#18330) 
* implement motordelay also for tilt operations

* enable motordelay for tilt operations

* Update xdrv_27_esp32_shutter.ino
 2023-04-04 17:45:33 +02:00
stefanbode f109d6ff72
Ensure Shuttermotorstop even on direct relay operation (#18329) 
* Ensure motorstoptime also on direct relay change

When relay is triggered with button or switches it did not take the motorstoptime into account

* Ensure motorstoptime also on direct relay change

When relay is triggered with button or switches it did not take the motorstoptime into account

* Ensure motorstoptime also on direct relay change

When relay is triggered with button or switches it did not take the motorstoptime into account
 2023-04-04 16:17:12 +02:00
Zbyněk Kocur b1ea413eae
Update xsns_86_tfminiplus.ino: FIX json output (#18321) 
Fixes JSON measurement output. Output numbers like Distance and SignalStrength were published as a string. Now they have the right data type.
 2023-04-03 16:47:44 +02:00
Theo Arends 542eca3154 Global fix http(s) connect issues 2023-04-03 16:12:29 +02:00
Theo Arends 6b2efa16dc Fix ESP32 WebQuery and WebGetConfig 2023-04-03 14:55:47 +02:00
Theo Arends d9353cf1e3 Fix upload connection error 2023-04-03 14:17:08 +02:00
Theo Arends 96e5f0dd38 Version bump v12.4.0.5 
- Add Matter support for Light and Relays on ESP32 by Stephan Hadinger (#18320)
 2023-04-03 10:06:03 +02:00
Theo Arends 326c605122 Prep support ESP32 enum SerialConfig 2023-04-02 14:20:03 +02:00
stefanbode efa7ae492e
Fix webpage, when ESP32 driver used (#18305) 
* Fix to enable ESP32 shutter

* required changes for dual operation with ESP32 shutter

* fix

* Fix missing information on webpage
 2023-04-01 14:53:01 +02:00
stefanbode d8f9a920ce
refactoring shutterbuttons completed (#18303) 
* added support to set tilt with the shutterposition

Documentation will be changed.
OLD: shutterposition <position>
NEW: shutterposition <position>(optional)/<tilt>

e.g. shutterposition 50,-90

* refactoring of shutterbuttons completed

moved away from bitmatrix to struct Typedef to enable further development and functionality.
Added support to define tiltposition with shutterbuttons
 2023-03-31 09:46:36 +02:00
Anton ACE 736ac74f53
xsns_103_sen5x bugfix (#18297) 2023-03-30 08:49:48 +02:00
Theo Arends 3cbe3dbf8b Create xdrv_27_esp32_shutter.ino 2023-03-29 15:58:46 +02:00
Theo Arends 2630c8e097 Delete xdrv_27_ESP32_shutter.ino 2023-03-29 15:58:26 +02:00
stefanbode 5c14a3169b
Shutter esp32 support up to 16 shutters (#18295) 
* Updates to support ESP32 shutter compiler option

* New ESP32 shutter driver

* Update xdrv_27_ESP32_shutter.ino

* Update xdrv_27_shutter.ino

* Update support_command.ino

* Update xdrv_27_shutter.ino

Fix compile error

* Update xdrv_27_ESP32_shutter.ino

Fix compile error

* Update xdrv_27_shutter.ino

Fix compile error

---------

Co-authored-by: Theo Arends <11044339+arendst@users.noreply.github.com>
 2023-03-29 15:43:19 +02:00
Theo Arends b321fab868 Refactor PCF8574 driver 2023-03-27 15:42:40 +02:00
Theo Arends 61b8e95543 Fix ESP32 change baudrate (#17869) 2023-03-26 16:37:29 +02:00
s-hadinger 2afa863e54
Berry fix `light.set()` (#18268) 2023-03-26 15:59:18 +02:00
Theo Arends 0f08a07658 Fix PCF8574 input mode (#18232) 2023-03-26 15:05:16 +02:00
Theo Arends 215c9cc30f Simplify base modes 2023-03-26 11:39:30 +02:00
Theo Arends ebe308acfc refactor button/switch code 2023-03-25 18:15:24 +01:00
Theo Arends 4645af038c Add BASE 2 for absolute relays 2023-03-25 17:50:23 +01:00
pkkrusty 3daedae2da
Add speed and heading info to GPS driver (#18035) 
* Add speed heading to driver

Added NAV-VELNED messages to driver, allowing speed and heading info on the main web page and JSON messages. Probably could be optimized; mostly another exercise in copy/paste

* wrap velocity code in #define USE_GPS_VELOCITY

Code space increases by 0k4, not sure about RAM (don't know how to measure). But added a struct with 320 bits, so maybe 40 bytes?

* Add documentation up top

---------

Co-authored-by: Theo Arends <11044339+arendst@users.noreply.github.com>
 2023-03-25 15:37:38 +01:00
Theo Arends 1e1c536a50 Consolidate Energy Column Gui 2023-03-25 15:16:06 +01:00
Theo Arends 9ae7b86efc Save some bytes 2023-03-25 11:59:42 +01:00
Theo Arends b32a093c0c Fix multidigit SwitchModes display 
Fix multidigit SwitchModes display
 2023-03-25 11:36:10 +01:00
Theo Arends 5bb624ad09 Add command ``SwitchMode0`` 
Add command ``SwitchMode0`` to show or set all SwitchModes
 2023-03-25 11:29:49 +01:00
pkkrusty b456b97dda
Include fix state in JSON output (#18254) 
Mirror the webpage display, and make fix status available for triggers and rules.
 2023-03-25 10:23:58 +01:00
Theo Arends 56b3fbe917 Add MCP23xxx absolute buttons and switches 2023-03-24 18:00:24 +01:00
Theo Arends 938399e086 Add absolute button/switch support 
Add absolute button/switch support (#18232)
 2023-03-24 17:20:28 +01:00
stegerfa 0081022543
fixes building the sensor names in case of multiple channel thermostat function (#18248) 
now it will follow SetOption64 (hyphen vs underscore)
hyphen is the standard - underscore the much safer option in my cases
as many user user underscore the mistake was not detected till now

Co-authored-by: Fabian Steger <git@fabian-steger.de>
 2023-03-24 14:54:23 +01:00
bovirus d7370e7211
Update italian language (#18240) 2023-03-22 20:11:00 +01:00
Theo Arends 00c60450c6 Consolidate messages 
- Consolidate messages
- Fix sen5x
 2023-03-22 13:25:55 +01:00
SteWers ab03654e02
[Thermostat] Enhancement publishing of control method (#18235) 
Enhancement publishing of control method. Independent, if hybrid mode is used or not.
 2023-03-22 10:41:53 +01:00
Theo Arends 6aab3d4c5e Bump version v12.4.0.4 
- Add Matter support simple Relay on Apple Homekit by Stephan Hadinger (#18239)
- Bump version v12.4.0.4
 2023-03-22 10:39:59 +01:00
s-hadinger a36edadc0f
Berry fix `tasmota.get_power(index)` (#18237) 2023-03-21 22:30:50 +01:00
Jeroen a68bc49cab
Added option to output TCP requested modbus data to MQTT (#18231) 
https://github.com/arendst/Tasmota/discussions/17369

Co-authored-by: JeroenSt <nospam@nospam.org>
 2023-03-21 09:39:32 +01:00
Jeroen fbbb4eaf84
Fix for issue: https://github.com/arendst/Tasmota/issues/18088 (#18228) 
Co-authored-by: JeroenSt <nospam@nospam.org>
 2023-03-20 21:26:38 +01:00
Theo Arends 59677d7e4a Consolidate sensor parameters 2023-03-20 17:11:05 +01:00
gemu daa64f098c
Scripter update (#18226) 
* fix failure with negative values in >D

* Create Powerwall.h
 2023-03-20 12:13:36 +01:00
Theo Arends 34ee7c67d8 Update changelogs 
- Add support for PMSA003I Air Quality Sensor by Jean-Pierre Deschamps (#18214)
- Add support for DingTian virtual switch/button/relay (#18223)
 2023-03-20 10:21:16 +01:00
Jean-Pierre Deschamps 5661a6798f
Support for pmsa003i (#18214) 
* Initial support for PMSA003I air quality sensor.

* Updated pmsa003i support to the latest dev branch

* Fixed typo in esp32 configuration

Removed all global variable and use the PM25_AQI_Data struct from Adafruit library
Fix typo Xsns100 to Xsns104
Fix Typo XI2C_71 to XI2C_78

* Move everything in custom Struct for PMSA003I driver

---------

Co-authored-by: Jean-Pierre Deschamps <info@jpdeschamps.com>
 2023-03-20 09:52:22 +01:00
Barbudor 948a82d75e
Add virtual Buttons & Switches in Digtian driver (#18223) 
* add support for virtual buttons or switches

* remove DINGTIAN key from SENSOR when using buttons-switches
 2023-03-19 20:19:48 +01:00
Theo Arends 115105bf7c Consolidate energy messages 2023-03-18 18:26:43 +01:00
Theo Arends 9a3a479c4f Reduce heap fragmentation 2023-03-17 21:17:53 +01:00
Theo Arends 54a2688cbf Bump v12.4.0.3 
- Bump v12.4.0.3
- Refactor energy monitoring reducing stack usage and solve inherent exceptions and watchdogs (#18164)
 2023-03-17 21:05:51 +01:00
stefanbode d0f4637611
Fix #18198 (#18204) 
* Fix #18198

Fix wrong movement with tilt if additional endstop defined

* simplify
 2023-03-16 14:38:04 +01:00
Theo Arends cc09ff21e1 Refactor RFSensor 2023-03-15 12:05:40 +01:00
Paul Blacknell 52227b0294
add: controller control method added to MQTT and Web UI (#18189) 2023-03-14 12:32:36 +01:00
Theo Arends bda32739a8 Support for reset settings on filesystem 2023-03-13 15:41:21 +01:00
Pi57 2ce93bdddd
Teleinfo, update energy display (3 phases) (#18167) 
Correct energy display and load bar display in case of 3 phases system
 2023-03-13 08:24:10 +01:00
s-hadinger 0bc48d16c2
Berry add `web_get_arg` event to drivers when `FUNC_WEB_GET_ARG` event is processed (#18175) 2023-03-12 19:01:08 +01:00
Theo Arends 76cea0c002 Fix Sonoff SC regression from yesterday 
Update changelogs.
 2023-03-12 11:11:57 +01:00
Gabriele Lauricella 7f64b6e04b
Enhanced TM1650 with 7-Segment commands like TM1637 (#18109) 
* Enhanced TM1650 with 7-Segment commands like TM1637

* Fix point for display type 2
 2023-03-12 09:22:40 +01:00
s-hadinger 34bf941cd2
Berry add `webclient` `collect_headers()` and `set_headers` (#18166) 2023-03-11 21:46:08 +01:00
s-hadinger 4aa9aebae3
Berry add `wc.set_follow_redirects(bool)` (#18165) 2023-03-11 19:48:39 +01:00
Theo Arends c74c92baed Add wifi current channel to GUI info screen (#18153) 2023-03-11 17:20:56 +01:00
Theo Arends 8a3546e5c4 Fix ESP32 energy period 
Fix ESP32 energy period shows kWh value instead of Wh regression from v12.3.1.5 (#15856)
 2023-03-11 17:01:43 +01:00
Theo Arends 2b89b7a134 Fix init order of device drivers (#18124) 2023-03-11 15:52:02 +01:00
Christian Baars 52d341f87c
TFL: bugfix uninitialized pointer, some cleanups (#18161) 
Co-authored-by: Christian Baars <christianbaars@MacBook-Pro-von-Christian.local>
 2023-03-11 10:55:57 +01:00
benderl d25ef165b9
remove absolute url (#18148) 
Co-authored-by: Lutz Bender <lutz@lutz-bender.de>
 2023-03-10 15:04:13 +01:00
s-hadinger d7d23c7b9a
Zigbee send Tuya 'magic spell' to unlock devices when pairing (#18144) 2023-03-09 21:34:32 +01:00
s-hadinger 513b0fece1
Berry tasmota.cmd() can mute logs (#18143) 2023-03-09 21:29:18 +01:00
s-hadinger ba1475f8cd
Berry refactor rule matcher (#18138) 2023-03-09 08:48:41 +01:00
s-hadinger 7167884f06
Haspmota change secondary colors for switch (#18133) 2023-03-07 19:16:59 +01:00
s-hadinger be56618ace
Add I2C example for M5Stack DigiClock (#18132) 2023-03-07 19:04:35 +01:00
s-hadinger 77c654fcdc
Fix parameter for `wire.endtransmission()` (#18131) 2023-03-07 19:01:42 +01:00
s-hadinger eab1abadc0
Zigbee add Human presence sensor Zigbee (#18122) 2023-03-05 22:21:48 +01:00
s-hadinger 6bd73fc883
Refactored Berry rule engine and support for arrays (#18121) 2023-03-05 21:50:32 +01:00
Christian Baars 83f039cdf7
Berry: add tensorflow lite for microcontrollers (#18119) 
Co-authored-by: Christian Baars <christianbaars@MacBook-Pro-von-Christian.local>
 2023-03-05 16:46:18 +01:00
Barbudor 0f9bece011
fix topic comparison (#18114) 2023-03-05 07:52:30 +01:00
Barbudor 0dc39e0470
Tariff command variant to force tariff - take 2 (#18112) 
* tariff command variant to force tariff

* move to Settings + add esp8266

* added tariff-forced to changelog
 2023-03-04 21:58:03 +01:00
Theo Arends ccdab295e7 Refactor PCF8574 driver 2023-03-04 15:06:52 +01:00
Theo Arends 6f44003cb5 Fix PZEM stabilize period on larger configs 
Fix PZEM stabilize period on larger configs (#18103)
 2023-03-04 11:56:54 +01:00
Barbudor 6b016eb860
tariff command variant to force tariff (#18102) 2023-03-03 18:43:26 +01:00
Theo Arends 747ebae670 Add support for multiple PCF8574 as switch/button/relay 2023-03-03 17:40:27 +01:00
Theo Arends cb988edba8 Prep PCF8574 virtual switch/button/relay 2023-03-03 16:54:57 +01:00
Jason2866 881c4f4a85
fix `OTA_URL` Safe Guard 2023-03-03 12:34:20 +01:00
Theo Arends 2e5501e9ab Add support for multiple MCP23008 as switch/button/relay 2023-03-03 10:44:35 +01:00
Theo Arends 453f0abad1 Revert "Update changelogs" 
This reverts commit d07d4b06c9.
 2023-03-03 10:31:31 +01:00
Theo Arends d07d4b06c9 Update changelogs 
- Add MCP23008 virtual switch/button/relay support
 2023-03-03 10:28:22 +01:00