Commit Graph

90 Commits

Author SHA1 Message Date
Theo Arends 509420377f Prep release 11.1 2022-04-07 17:26:08 +02:00
Theo Arends e9ec0934d3 Remove support for Internet Explorer
Remove support for Internet Explorer by allowing ECMAScript6 syntax using less JavaScript code bytes (#15280)
2022-04-03 15:01:47 +02:00
Theo Arends c3132594d3 Add support for improv as used by esp-web-tools 2022-04-02 11:43:29 +02:00
Theo Arends 55610efcb2 Support for up to four DS3502
Support for up to four DS3502 digital potentiometers with command ``Wiper<x> 0..127``
2022-03-17 16:03:40 +01:00
Impact 7c2c2d6eed
Add `USE_VL53L1X` 2022-02-22 00:18:02 +01:00
Theo Arends 7aacdf4fbe Add support for BME688
Add support for BME688 with latest Bosch-Sensor-API library (#14513)
2022-01-19 17:05:39 +01:00
Theo Arends 88b296cf83 Support for Eastron SDM230
Add support for Eastron SDM230 modBus energy meter (#13443)
2022-01-15 15:02:45 +01:00
Stephan Hadinger b409377068 MQTT TLS dual mode (CA or fingeprint) in same firmware, ``SetOption132 1`` to force fingerprint 2021-12-01 21:38:28 +01:00
Barbudor e84e4ea8a3 fix typo 2021-11-28 16:40:00 +01:00
Barbudor 86d94e6c0e remove minimal from BUILDS table 2021-11-28 16:25:24 +01:00
Stephan Hadinger f3c235b8e9 Removed ILI9488 driver in favor of Unversal Display Driver 2021-11-17 22:48:48 +01:00
Theo Arends a466c5abf3 Add support for HM330X
Add support for HM330X SeedStudio Grove Particule sensor (#13250)
2021-10-08 13:59:11 +02:00
Theo Arends 16f9e2bd88
Merge branch 'development' into development+SCD40 2021-09-23 14:42:04 +02:00
Barbudor 65989d2552 bl09xx driver for both bl0939 and bl0940 2021-09-21 18:25:52 +02:00
Arnold f66c25ee54
SCD40 disabled by default in sensors image 2021-09-20 21:32:52 +02:00
Arnold-n 7d3df14640 add code size info and enable in ESP32 build 2021-09-16 08:08:50 +02:00
Arnold-n 6148f666ce Not in ESP32 (not tested yet) 2021-09-15 14:05:25 +02:00
Arnold Niessen a260fa85a3 configuration files updated for SCD40/41 2021-09-15 13:26:39 +02:00
Adrian Scillato 9cdeab19d5
Update BUILDS.md 2021-08-28 21:20:00 -03:00
Theo Arends 464ab2cb6b Add support for AM2320 Temperature and Humidity Sensor by Lars Wessels (#12485) 2021-06-27 13:53:19 +02:00
Adrian Scillato 5d03cc3a3a
Enable VL53L0X and disable TSL2561 for Tasmota-Sensors and Tasmota32 2021-04-13 13:37:48 -03:00
Theo Arends f50c3f8f62 Admin USE_ENERGY_DUMMY 2021-04-06 12:08:07 +02:00
Theo Arends d2824dd9ba Update BUILDS.md 2021-04-01 18:05:59 +02:00
Theo Arends 0331e47e4c Add support for multiple CCS811 sensors
Add support for multiple CCS811 sensors with baseline control (USE_CCS811_V2) by clanganke (#10858)
2021-03-31 15:04:24 +02:00
Theo Arends be72bde8f5 Add ESP32 support for internal Hall Effect sensor
Add ESP32 support for internal Hall Effect sensor connected to both GPIO36 and GPIO39 only
2021-03-27 15:15:15 +01:00
Jason2866 8bc48d37b2
No Discovery 2021-03-21 14:33:12 +01:00
Jan Bubík c6673d4081 new feature: LCD/DLP Projector Serial Control
- implemented as XDRV53
 - user must configure GPIO pins "DLP Rx" and "DLP Tx" for serial communication
 - emulates an additional RELAY by sending ON/OFF commands to Projector
 - continually polls the Projector's state to update virtual RELAY state
 - blocks RELAY1 in ON state while Projector is running (to protect the lamp)
 - serial codes for NEC and OPTOMA, ready for more manufacturers
 - tested with NEC V300W
2021-02-27 22:28:29 +01:00
Theo Arends 14206e46a1 Add support for TM1637 seven segment display by Ajith Vasudevan (#10889) 2021-02-17 12:32:36 +01:00
Norbert Richter 435be84ff3
Add SDM72 Modbus energy meter 2021-02-09 16:13:40 +01:00
Theo Arends c934a20b4f Add support for TOF10120
Add support for TOF10120 time of flight sensor by Cyril Pawelko (#10190)
2021-01-22 16:48:41 +01:00
Norbert Richter 8387c14dfc
Add NeoPool feature 2021-01-20 15:06:59 +01:00
Theo Arends 7c4770e69c Update BUILDS.md 2021-01-11 14:14:22 +01:00
Theo Arends f6d7c5c578 Update changelog 2021-01-11 14:13:20 +01:00
Theo Arends 54c1a2d029 Add support for SPI display driver for ST7789 TFT
Add support for SPI display driver for ST7789 TFT by Gerhard Mutz (#9037)
2021-01-01 15:05:58 +01:00
Barbudor f1c675e7a1 Also referencing USE_IBEACON_ESP32 2020-12-29 12:08:33 +01:00
Barbudor 46db2f2c99 BUILDs should refer MI_ESP32 in tasmota32 and tasmota32-sensors 2020-12-29 12:06:14 +01:00
Theo Arends 931929c952 Add support for MFRC522
Add support for SPI connected MFRC522 13.56MHz rfid card reader (#9916)
2020-12-06 16:32:07 +01:00
Theo Arends 6fed564ee5
Update BUILDS.md 2020-11-22 14:43:14 +01:00
Julio Gonzalez Gil 2eb70531e4 Document state of USE_PING at BUILDS.md 2020-11-22 14:38:42 +01:00
Theo Arends c02770ce96 Add support for Shelly Dimmer 1 and 2
Add support for Shelly Dimmer 1 and 2 by James Turton (#9854)
2020-11-14 16:43:32 +01:00
Theo Arends 4b6465fd10 Add support for fingerprint sensor
Add support for AS608 optical and R503 capacitive fingerprint sensor
2020-11-11 17:31:48 +01:00
Theo Arends e498b28864 Add support for EZO PMP sensors
Add support for EZO PMP sensors by Christopher Tremblay (#9760)
2020-11-07 11:35:33 +01:00
Theo Arends 54f9532919 Add command ``SetOption114 1``
Add command ``SetOption114 1`` to detach Swiches from Relays and enable MQTT action state for all the SwitchModes
2020-11-03 14:34:02 +01:00
Theo Arends 67bd5daf45 Update changelog 2020-11-02 11:58:23 +01:00
Theo Arends db863c4589 Add support for EZO FLO
Add support for EZO FLO sensors by Christopher Tremblay (#9697)
2020-11-01 15:15:10 +01:00
Theo Arends 6f7a20e2ec Add support for EZO PRS sensors
Add support for EZO PRS sensors by Christopher Tremblay (#9659)
2020-10-29 11:53:25 +01:00
Theo Arends 85d2626e84 Refactor feature list build 2020-10-28 11:37:59 +01:00
Theo Arends a96218fc1c v9.0.0.3
- Add TLS in binary tasmota-zbbridge (#9620)
- Add support for EZO CO2 sensors by Christopher Tremblay (#9619)
2020-10-25 14:46:13 +01:00
Theo Arends 582c32f5b9 Add support for EZO EC sensor
Add support for EZO EC sensors by Christopher Tremblay (#9613)
2020-10-24 12:41:08 +02:00
Theo Arends 1021cf3ca5 Update changelog and releasenotes 2020-10-23 16:56:03 +02:00