Commit Graph

72 Commits

Author SHA1 Message Date
Theo Arends 4e40bbf3b6 Bump version v14.3.0.7 - again
- ESP32 max number of supported switches/buttons/relays from 28 to 32
- ESP32 max number of interlocks from 14 to 16
2024-11-17 14:03:04 +01:00
Theo Arends 6821293819 Revert "Bump version v14.3.0.7"
This reverts commit 14c0a42203.
2024-11-17 11:30:55 +01:00
Theo Arends 14c0a42203 Bump version v14.3.0.7
- ESP32 max number of supported switches/buttons/relays from 28 to 32
- ESP32 max number of interlocks from 14 to 16
2024-11-16 17:47:18 +01:00
Theo Arends 5de16c1cca Add settingsminimum 2024-11-16 15:02:01 +01:00
Theo Arends de45fda781 Add minimum defaults in case of error 2024-11-16 14:44:18 +01:00
Theo Arends cf94ccf59c Bump version v14.3.0.6
- Add command ``WebColor20`` to control color of Button when Off
2024-11-11 22:44:18 +01:00
Theo Arends 0744bf7f2b Save 6k code from ESP32 safeboot 2024-11-11 15:17:22 +01:00
Theo Arends 49d706f54c Add DALI command `DaliGroupSliders 0..16` to show GUI group sliders with feedback disabling `DaliLight` 2024-10-31 17:01:36 +01:00
Theo Arends 2b6acff4f4 Bump version to v14.3.0.2
- DALI command `DaliGear` to set max found gear to speed up scan response
- DALI command `DaliGroup` to add gear to groups
- DALI command `DaliTarget` to set light control broadcast, group number or gear number
- DALI renamed commands `DaliCommission` to `DaliScan` and `DaliWeb` to `DaliLight`
- DALI set Tasmota light control as default
2024-10-22 12:38:56 +02:00
Theo Arends 1bf6a13d7c Bump version v14.2.0.4
- Add HX711 optional calibration precision option on command ``Sensor34 2 <weight in gram> <precision>`` where `<precision>` is 1 to 10 (#13983)
2024-09-08 17:32:35 +02:00
Theo Arends 831597e7d9 Version v14.2.0.3
- Add command ``SetOption69 1`` to enable Serial Bridge inverted Receive (#22000)
2024-08-23 11:22:26 +02:00
Theo Arends e2fdf18625 Fix CalVer to SemVer updates 2024-07-21 12:23:10 +02:00
Theo Arends 33062dc839 Refactor energy drivers 2024-06-30 16:58:37 +02:00
Theo Arends 75c47b6948 Extend command ``SetOption147 1`` to disable publish of IRReceived MQTT messages (#21574) 2024-06-14 11:23:03 +02:00
Theo Arends 87148ae0c1 Change SerialBridge command ``SSerialSend9`` replaced by ``SSerialMode``
- Bump version v14.1.0.2
2024-06-11 17:27:39 +02:00
s-hadinger 01f9097acb
Add default value for `SetOption151` (#21560) 2024-06-03 22:53:13 +02:00
Theo Arends f5ed2e0845 Fix oops 2024-05-30 10:54:32 +02:00
Theo Arends 2771827c15 Changed TCP bridge increased baudrate selection (#21528)
- Bump v14.0.0.4
2024-05-30 10:50:12 +02:00
Theo Arends ac06195907 Remove non IDF5 code 2024-05-15 16:45:42 +02:00
Theo Arends c41f18a9b6 Fix calloc allignment 2024-05-05 18:26:21 +02:00
s-hadinger 041540c80c
Changed internal macro `APP_SLEEP` to `TASMOTA_SLEEP` to specify default sleep in ms (#21324) 2024-05-03 09:03:45 +02:00
s-hadinger 18bdf07903
Reduced safeboot size by 2.9KB (#21322)
* Reduced safeboot size by 2.9KB

* remove leftover
2024-05-02 23:09:56 +02:00
Theo Arends fe89774fe0 Bump version v13.4.0.4
- Add command ``PowerLock`` to disable power control of selected outputs (#21081)
2024-04-03 11:47:38 +02:00
Theo Arends 715914bdd0 Add internal support for persistent JSON settings using single file 2024-02-07 22:55:39 +01:00
Fulvio Spelta ab8676d865
SetOption158 publish/suppress ModbusReceived MQTT messages (#20678) 2024-02-07 15:57:09 +01:00
Theo Arends 728f91b602 Update changelogs 2023-12-05 10:07:02 +01:00
Theo Arends 14793c2594 Shorten code and add more comments 2023-12-04 11:44:59 +01:00
Theo Arends 7a6cca6d20 Add command ``WebCanvas``
Add command ``WebCanvas linear-gradient(#FF0018 7%,#FFA52C,#FFFF41,#008018,#0000F9,#86007D 93%)`` to set GUI canvas
2023-12-03 15:52:44 +01:00
Theo Arends b7819bcfac ESP32 show LHBT background if ``WebColor2`` bit0 is not set. Bit0 is default set using #252525 2023-12-02 16:59:04 +01:00
Theo Arends d96ed15e95 Bump version v3.1.0.4 2023-10-04 13:52:08 +02:00
Barbudor 335e18e8cb
Allow webbutton up to 32 (#19580)
* Allow webbutton up to 32

* use named const
2023-09-29 09:56:52 +02:00
s-hadinger f7c4c16a9c
Support for HDMI CEC protocol (#19434) 2023-09-01 21:46:18 +02:00
Theo Arends 0c3b559630 Phase 1 support C2/C6 2023-08-21 16:00:20 +02:00
s-hadinger 5c8c7cdfca
Prepare for Arduino v3 / esp-idf v5 (#19264) 2023-08-05 15:11:10 +02:00
Theo Arends b149443691 Fix default battery level
- Fix default battery level (#19160)
- Bump version to v13.0.0.3
2023-07-21 14:35:22 +02:00
stefanbode d1a4296867
New DEEPSLEEP topic for HA + Battery Level % support (#19134)
* New LWT on deepsleep

To allow better integration into HA LWT topic will report details of sleep status:
16:54:04.388 MQT: hm/tele/ESP_3284D1/LWT =
{"Sleep":{"Time":"2023-07-17T16:55:03","Sleep":1689612844,"Wakeup":1689612903}}

* Revert LWT back to non JSON

Send DeelSleep on LWT
Send Deepsleep parameters on topic DeepSleep

* Setting default for batteryLevel

* Enable BatteryPercentSet

Changing the battery level e.g. by rule

* Added Battery % to status message

* added battery_level_percent

* Added battery % support in STATE message

* Enable setting battery level

101 is reserved for power-plug. No battery Level reported

* Setting default for battery Level

101 is reserved for power plug
0..100 normal battery values

* Revert back LWT to Offline

Removed "DeepSleep" LWT status until further decision is made. Current implementation is technical sufficient for HA to detect a battery powered device

* Added discovery message after deepsleep change

* Added discovery for battery and deepsleep
2023-07-20 09:51:08 +02:00
sfromis 6382c2806c
More user-friendly defaults for DisplayMode and DisplayDimmer (#19138)
Changing default for DisplayMode from 1 to 0. Users are getting confused by the display doing something they did not ask for (and not being aware of DisplayMode). This got worse with LVGL/HASPmota displays becoming common, with users having much less reason to dive into the old DisplayXxxxx commands. And it may even be hard to see that it is even a display of time/date causing the display to flicker.

Changing default for DisplayDimmer from 10% to 50%. The low brightness of 10% is not always easy to see, especially in daylight. 50% is generally better, while not going "full blast" with 100%.
2023-07-18 08:26:51 +02:00
Theo Arends 9638beacec Fix possible buffer overflow 2023-07-12 12:45:02 +02:00
Theo Arends 5b6a25a7a0 Fix driver config backup and restore
Fix driver config backup and restore (#18295)
2023-07-12 10:52:58 +02:00
Theo Arends 889e6ea54d Fix driver config restore 2023-07-11 16:12:04 +02:00
Theo Arends 43bc81010f Configuration file save and restore .xdrvsetXXX
Configuration file save and restore now backup and restore ``.xdrvsetXXX`` files too (#18295)
2023-07-10 16:03:32 +02:00
Theo Arends 77103baa0a Add internal support for max log level 2023-05-19 15:20:21 +02:00
Theo Arends 57f85ae478 Optimize dynamic WiFi power 2023-05-17 10:45:00 +02:00
Theo Arends 29ae903f67 Fixed EnergyTotal divided twice
Fixed EnergyTotal divided twice during minimal upgrade step regression from v12.3.1.3 (#18024)
2023-02-24 16:15:02 +01:00
Theo Arends d9cbbaeb2a Fix energy usage and return migrated too small
Fix energy usage and return migrated too small (/10000) regression from v12.3.1.3
2023-01-30 15:36:46 +01:00
Theo Arends c63919d783 Change Energy totals max supported value
- Change Energy totals max supported value from +/-21474.83647 to +/-2147483.647 kWh
- Bump version to v12.3.1.3
2023-01-01 11:32:30 +01:00
Theo Arends 3555d88bee Bump version v12.3.1.2
- Fix shutter default motorstop set to 0 (#17403)
2022-12-21 15:20:33 +01:00
Theo Arends 4f31e7a1b2 Add command ``SetOption35 0..255``
Add command ``SetOption35 0..255`` to skip number of received messages in Serial Bridge (default 0) (#17140)
2022-11-20 12:52:24 +01:00
Theo Arends a924e41ff3 Bump version v12.2.0.5
- Fixed ModbusBridge baudrates over 76500 baud (#17106)
- Bump version v12.2.0.5
2022-11-17 11:44:51 +01:00
Theo Arends 6f00b455e7 Add serial receive poll during sleep
Add serial receive poll during sleep for tuya and serial bridge
2022-11-11 09:57:00 +01:00