Theo Arends
444f4fcd62
Fix ESP32 32MB program flash size
2023-10-30 15:29:01 +01:00
stefanbode
8540ee37fc
fix on servo and ESp32 ( #19878 )
...
servo did not react same on ESP32 than ESP8266. Changed to TASMOTA pwmapply capabilities
2023-10-30 14:48:32 +01:00
anishsane
be94a6cac8
Fix for CmndHDMIAddr function. ( #19866 )
...
* Fix for CmndHDMIAddr function.
1. Typical values for XdrvMailbox.payload are 0x1000...0x4000. Hence the
check should be (value > 0).
2. Don't overwrite the user supplied value with value read from the hardware.
* Correct the condition in CEC_Device::OnReady.
We should check for _on_ready_cb before calling _on_ready_cb.
2023-10-29 17:14:44 +01:00
Alexander Nagy
b3b0ffd6b0
Adding display.ini for 1.44 inch 128x128 red SPI display ( #19862 )
2023-10-29 13:16:32 +01:00
Theo Arends
26f14caee9
Fix S2 core3 compiles
2023-10-28 16:20:44 +02:00
Norbert Richter
b65f32c5f3
Neopool enhancements for HA ( #19857 )
...
* Add NeoPool hydrolysis setpoint and max
* Add NeoPool command ``NPFiltrationSpeed``
* Change NeoPool topic ``Power`` to ``Powerunit``
* Add ``SO157`` for NeoPool output sensitive data
2023-10-28 14:07:49 +02:00
Jason2866
75ec9da8a2
Refactoring of storing safeboot bin ( #19858 )
...
* Folder for storing safeboot is now configurable
* Platform 2023.10.06
* Platform 2023.10.12
2023-10-28 13:15:31 +02:00
FransOv
0130ce972a
Support of Winsum ZH03B sensor Dust particle sensor in xsns_18_pms5003.ino ( #19850 )
...
* Update xsns_18_pms5003.ino
The Winsum ZH03B sensor is quite similar to the Plantower PMS3003 sensor. The main difference is the response in passive mode. With these changes xsns_18_pms5003.ino can support the ZH03B sensor when PMS_MODEL_ZH03X is defined in the configuration file.
* Update xsns_18_pms5003.ino
2023-10-27 17:34:49 +02:00
Theo Arends
84eaae572c
Fix core 3 S2 USB
2023-10-24 17:00:11 +02:00
Theo Arends
5c395ffc06
Fix core 3 S2 USB
2023-10-24 16:41:36 +02:00
Theo Arends
84ced0fcab
Add ESP32 core v3 auto TasConsole USB or Serial connection by @staars
2023-10-24 16:32:39 +02:00
Barbudor
1d5f55d374
increase MAX_HUE_DEVICES to 32 ( #19820 )
2023-10-23 09:36:39 +02:00
s-hadinger
4f9c7ada04
Fix audio Arduino 3 ( #19819 )
2023-10-22 21:30:36 +02:00
Theo Arends
0ae793a8d4
Save some bytes
2023-10-21 17:37:31 +02:00
Theo Arends
57860b692d
Fix GpioRead ( #19810 )
2023-10-21 17:20:55 +02:00
s-hadinger
356de1a16a
Add command ``GpioRead`` ( #19814 )
...
* Add command ``GpioRead``
* change output
2023-10-21 15:56:40 +02:00
Theo Arends
6efe2ab514
Add I2C bus2 support to LM75AD temperature sensor
2023-10-21 15:42:32 +02:00
Theo Arends
bec0c27750
Add I2C bus2 support to SI1145/6/7 Ultra violet index and light sensor
2023-10-21 15:31:54 +02:00
Theo Arends
bd90363565
Update changelogs
2023-10-21 14:48:12 +02:00
Theo Arends
c91882daeb
Add ADS1115 I2C bus2 support
2023-10-20 17:39:00 +02:00
Theo Arends
7238d857e9
Add SHT3x I2C bus2 support
2023-10-20 14:52:21 +02:00
Theo Arends
f05470bf81
Add HYT I2c bus2 support
2023-10-20 13:35:24 +02:00
Norbert Richter
1f8cd6a259
Fix NeoPool filtration mode display ( #19801 )
2023-10-19 18:01:56 +02:00
Theo Arends
e3253fea8f
Add I2C bus2 support to BH1750
2023-10-19 18:01:12 +02:00
Theo Arends
b39adacc41
Fix HTU21 bus number
2023-10-19 17:44:59 +02:00
Theo Arends
49709807c7
Add I2C bus2 support to HTU temperature sensor
2023-10-19 17:37:19 +02:00
Theo Arends
b6811b2f4e
Prep ESP32 I2C bus2 support
2023-10-19 16:59:53 +02:00
Theo Arends
70287d90ad
Bump v13.2.0.1
2023-10-19 11:45:12 +02:00
stefanbode
d5f506b1e3
reverted back some function and fix frequency storage ( #19791 )
...
* optimize disc write delay during shutter movement
changed to dynamic write delay to ensure no disc write on multiple shutter movement with stepper shutters.
* optimize disc write delay
ensure disc write will be postponed until all shutters stopped
* reverted back to simple version
* removed duplicate obsolete compiler options
2023-10-18 23:41:52 +02:00
Theo Arends
58324da242
Final fix ;-) ( #19763 )
2023-10-18 16:19:13 +02:00
Theo Arends
1fa036f176
Fix unsorted DS18Alias ( #19763 )
2023-10-18 16:12:02 +02:00
Theo Arends
13c6bc91cc
Fix empty name if no DSAlias defined ( #19763 )
2023-10-18 15:15:49 +02:00
stefanbode
2daaa367ff
stepper shutter channel fix ( #19784 )
2023-10-18 11:29:35 +02:00
Christian Baars
17143cea44
remove HomeKit remnants from mi32 legacy driver ( #19782 )
2023-10-17 21:00:46 +02:00
sfromis
ab420b6cc1
DS18x20_USE_ID_AS_NAME in my_user_config.h ( #19777 )
...
Add mention of #define DS18x20_USE_ID_AS_NAME
2023-10-17 11:00:39 +02:00
Christian Baars
b98ad59d11
Delete xsns_62_esp32_mi_homekit.c ( #19778 )
2023-10-17 11:00:02 +02:00
s-hadinger
82858616f6
Zigbee fix timezone when device reads LocalTime attribute ( #19772 )
2023-10-17 09:02:14 +02:00
Barbudor
8e9299ec97
fix mis-order ( #19769 )
...
* fix mis-order
* fix mis-order on esp32 too
2023-10-16 21:47:31 +02:00
bovirus
5a9da83997
Update Italian language ( #19754 )
2023-10-16 16:07:37 +02:00
s-hadinger
367768b00e
Re-enable features for Arduino 3 ( #19761 )
2023-10-16 12:44:05 +02:00
Norbert
a04995a3f4
Update xdrv_63_modbus_bridge.ino, brackets not needed. ( #19759 )
2023-10-16 09:42:55 +02:00
JeroenSt
91ba05ac3b
ModbusBridge write memleak fix (19733) ( #19758 )
...
Co-authored-by: JeroenSt <nospam@nospam.org>
2023-10-16 08:26:26 +02:00
s-hadinger
8467b41290
Teleinfo use Apparent Power as Active Power approximation ( #19756 )
2023-10-16 08:20:07 +02:00
s-hadinger
d3784a26ab
Audio Core3 compilation for ESP32C3 ( #19755 )
2023-10-15 22:46:01 +02:00
stefanbode
124fbf8dcb
fix shutterfrequency change on mutiple channels ( #19737 )
...
* fix shutterfrequency change on mutiple channels
* LEDC channel management for stepper shutter
LEDC channels dynamically assigned to ensure up to 16 shutters can be defined. Number of simultaneous moving shutters is limited by number of LEDC channels.
* bugfix >=
2023-10-15 18:40:26 +02:00
Jason2866
56314e5423
Update de_DE.h
2023-10-15 14:51:11 +02:00
Saentist
715b64dc28
RU Translation fix ( #19746 )
2023-10-15 11:57:53 +02:00
Eduardo Spremolla
b63a061aeb
Update xsns_02_analog.ino for calibrated values on ESP32 ( #19732 )
...
ESP32 ADC has variables errors, but calibrations values are put in eFuses at factory test.
analogReadMilliVolts() from api correct the ADC reading with tata values.
Since now the value are mV and not ADC numbers, the fast solution is to revert it back to ADC numbers:
divide by Vcc => ANALOG_V33*1000 and multiply by ANALOG_RANGE
Other way is to modify all sensor cases to account for the different unit.
2023-10-15 11:57:13 +02:00
s-hadinger
16307bc4b8
More audio refactoring for core3 ( #19749 )
2023-10-15 11:22:20 +02:00
bovirus
67deceeba8
Update Italian language ( #19730 )
2023-10-13 17:50:06 +02:00