* New LWT on deepsleep
To allow better integration into HA LWT topic will report details of sleep status:
16:54:04.388 MQT: hm/tele/ESP_3284D1/LWT =
{"Sleep":{"Time":"2023-07-17T16:55:03","Sleep":1689612844,"Wakeup":1689612903}}
* Revert LWT back to non JSON
Send DeelSleep on LWT
Send Deepsleep parameters on topic DeepSleep
* Setting default for batteryLevel
* Enable BatteryPercentSet
Changing the battery level e.g. by rule
* Added Battery % to status message
* added battery_level_percent
* Added battery % support in STATE message
* Enable setting battery level
101 is reserved for power-plug. No battery Level reported
* Setting default for battery Level
101 is reserved for power plug
0..100 normal battery values
* Revert back LWT to Offline
Removed "DeepSleep" LWT status until further decision is made. Current implementation is technical sufficient for HA to detect a battery powered device
* Added discovery message after deepsleep change
* Added discovery for battery and deepsleep
* Remove recursion into folders on Manage Files. May be enabled with UFILESYS_RECURSEFOLDERS_GUI. On Edit of a file, Save and Magane btuttons return to the folder containgint the file being edited. On delete file, UI returns to the folder that the deleted file was in.
* Make newfile put in in the current folder, and return to current folder on save of manage button.
* Add folderOnly and FileOnly functions to reduce code duplication.
Enable folder delete.
Enable folder listing to be aborted (x in browser)
Disbale ESP32 Download Task. Needs attention.
Allow folder create from newfile name.
This change will allow mqtt messages simpler by allowing something like
`publish cmnd/ir-bridge/IRHVAC {"Power": "On"}`.
The simpler format is required for working with mqtt clients like
iotMQTTPanel or similar on android.
Limitations:
- Requires full message be sent at-least once. I work around this with
a `system#boot` rule
- Gets messy with multiple devices. I have only one AC per room, and
this doesn't doesn't interfere with other IR devices.
TODO:
- [ ] Change the build flag `INCREMENTAL_IRAC`to a `SetOption`
- [ ] Persist `irac_prev_state` across reboots.
- [ ] Support multiple devices.
This reduces allocation to a single allocaiton, but also theroetically allows the Bytes object to grow if content-length was unset.
(cherry picked from commit 936477f5977dd1a4f899498cc7cc0baf05b34a89)
* remove unused variable
* Relocate SO92 implementation
This way, SO92 does not ignore SO106
* Relocate RGBWWTable implementation
This fixes a bug related to RGBWWTable and SO92.
Also, the code is tidier this way
* Cleanup: Reduce code duplication
* more consistent behaviour for SO92 and free_cw
---------
Co-authored-by: jonschz <jonschz@users.noreply.github.com>
* Add mutex to many camera functions.
* Allow stream to continue after wcinit command (and other commands which reconfigure).
* Adust retries on camera init, specifically log success if it retried.
Shorten messages to save rom.
I have seen fail of 0x103 and 0x20002 succeed on second try.
* IR: Added support for new A/C protocol fields
New fields introduced in IRremoteESP8266 v2.8.5:
1. Command (one of: [Control | Config | iFeel | Timer], default: Control) - allows to set IR command type (e.g. iFeel for no-beep ambient sensor report)
2. iFeel (boolean, default: false) - configures whether iFeel (ambient sensor temp. is used by the A/C unit)
3. SensorTemp - the ambient sensor temperature reading to send
Note:
- Fan setting via int is now 6-value (breaking change -> 6 is the new max)
* IR A/C: Model now pretty-printed to JSON
Model string is the default (falls back to int if n/a)
* IR A/C: Added separate JSON resp. per command type
* No change for "kControlCommand" (default/legacy).
* SensorReport/Timer/Config commands only contain relevant JSON nodes
Additionally:
Clock has time semantics (input: minutes, output: HH:MM), except for "config" mode,
where state.clock is used as ConfigKey and state.sleep is used as ConfigValue.
---------
Co-authored-by: Mateusz Bronk <2566147+mbronk@users.noreply.github.com>
* Update xdrv_68_zerocrossDimmer.ino
* Address IRAM issue report
removed some IRAM from ESP8266. Further improvement to ESP32 as soon as measurement is available.
* Added support for Dingtian Relay Board v3.6.10
* Output OE was never initialized
* Removed white spaces trying to fix language builds
* Fix for https://github.com/arendst/Tasmota/pull/18535#pullrequestreview-1406978097
* Fixed language builds
---------
Co-authored-by: JeroenSt <nospam@nospam.org>
* Enabled ZCDimmerSet for ESP8266
- Increased interrupts time to get stablity. Savedata issue is gone.
- Increased accuracy to trigger an on sinus curve.
- Enabled high resolution trigger ZCDimmerSet for ESP8266
* Update xdrv_68_zerocrossDimmer.ino
* Worked on ESP32 dimmer with Zero cross
Until now the ESP32 does not support zero-cross dimmer. I take a sneak how they did in in ESPhome and adapted the approach to TASMOTA. At the end it works that smooth that likely i will change ESP8266 either so we have a common code. Currently ESP8266 is not touched.
There is a minor issue with savedata == default. When changing the dimmer value the interrupts get stopped during write of the config data to flash.
* ESP8266 Dimmer added
Worked all so well and the code is much smaller. There is no need for reconfiguration on existing users. But there are settings not needed anymore. Will work on the documentation. Anyhow existing installations can upgrade without hickup
* Optimized endpoints at dimmer 0 and 100
* Removed debug stuff
* Fix Issue at dimmer = 0
* Small bugfix
* Final checked Version
* Update xsns_01_counter.ino
* Add missing func
* Update xsns_01_counter.ino
* Moved out of the house of counter and build my own one
* New ZeroCross Driver
* Update xdrv_91_zerocrossDimmer.ino
* evolving
* Delete xdrv_91_zerocrossDimmer.ino
* Add files via upload
* Changed drv number from 1 to 68
* Commit to merge
* fix setting migration issue
* next try to fix migration issue
@arendst: I saw you made also some changes to the xdrv122. I copied this and it looks like setting the crc32 was the root of the issue. You removed it and I do the same now. Looks much better.
* Ensure motorstoptime also on direct relay change
When relay is triggered with button or switches it did not take the motorstoptime into account
* Ensure motorstoptime also on direct relay change
When relay is triggered with button or switches it did not take the motorstoptime into account
* Ensure motorstoptime also on direct relay change
When relay is triggered with button or switches it did not take the motorstoptime into account
* added support to set tilt with the shutterposition
Documentation will be changed.
OLD: shutterposition <position>
NEW: shutterposition <position>(optional)/<tilt>
e.g. shutterposition 50,-90
* refactoring of shutterbuttons completed
moved away from bitmatrix to struct Typedef to enable further development and functionality.
Added support to define tiltposition with shutterbuttons
now it will follow SetOption64 (hyphen vs underscore)
hyphen is the standard - underscore the much safer option in my cases
as many user user underscore the mistake was not detected till now
Co-authored-by: Fabian Steger <git@fabian-steger.de>
s-hadinger
stefanbode
Theo Arends
gemu
btsimonh
xsp1989
Jacek Ziółkowski
jonschz
Paul Blacknell
Norbert
Subhash Chandra
Barbudor
blakadder
Bernhard Urban-Forster
CCTweaker
Jeroen
Jason2866
Christian Baars
f-reiling
Mateusz Bronk
ferix98
stegerfa
SteWers