23ec00a452
Add command Buzzer
...
Add command Buzzer with optional parameters <number of beeps>,<duration of beep in 100mS steps>,<duration of silence in 100mS steps> enabled when a buzzer is configured (#5988 )
2019-08-12 17:18:08 +02:00
c9139514d0
Add ZigBee support phase 1 - low level MQTT ZNP messages for CC2530 devices
2019-08-09 22:52:33 +02:00
afb39aa680
Add support for CHIRP soil moisture sensor by Christian Baars
...
Add support for CHIRP soil moisture sensor by Christian Baars
2019-08-07 12:08:13 +02:00
81ca44dba2
Add SetOption68 to enable multi-channel PWM instead of a single light ( #6134 )
2019-08-06 10:57:50 +02:00
49022d0320
6.6.0.2 Add support for Sonoff iFan03 as module 71
...
Add support for Sonoff iFan03 as module 71 (#5988 )
2019-07-14 15:23:02 +02:00
0243e2be7e
Add command SetOption42 0..255 to set over temperature in Celsius. Defaults to 90
...
Add command SetOption42 0..255 to set over temperature in Celsius. Defaults to 90 (#6036 )
2019-07-08 14:16:33 +02:00
86314e24e5
Fix ambiguous Tuya set relay option by adding command SetOption41 allowing to control number of virtual relays
...
Fix ambiguous Tuya set relay option by adding command SetOption41 allowing to control number of virtual relays (#6039 )
2019-07-08 12:42:46 +02:00
46210bc9f0
Add command SetOption40 0..250
...
Add command SetOption40 0..250 to disable button functionality if activated for over 0.1 second. Needs SetOption1 1 and SetOption13 0 (#5449 )
2019-06-19 12:37:35 +02:00
5f3be7ca87
Add define USE_DHT to my_user_config.h to save space in sonoff-basic.bin
...
Add define USE_DHT to my_user_config.h to save space in sonoff-basic.bin
2019-06-16 17:03:41 +02:00
12da2fd6f9
Add define USE_COUNTER to my_user_config.h to save space in sonoff-basic.bin and sonoff-minimal.bin
...
Add define USE_COUNTER to my_user_config.h to save space in sonoff-basic.bin and sonoff-minimal.bin
2019-06-16 16:43:23 +02:00
073fd5c2cd
6.5.0.15 Change pubsubclient MQTT_KEEPALIVE from 10 to 30 seconds
...
6.5.0.15 20190606
* Change pubsubclient MQTT_KEEPALIVE from 10 to 30 seconds in preparation of AWS IoT support
2019-06-06 12:14:04 +02:00
164b3aaf11
Add command SetOption39 1..255 to control CSE7766 (Pow R2) or HLW8032 (Blitzwolf SHP5) handling of power loads below 6W
...
Add command SetOption39 1..255 to control CSE7766 (Pow R2) or HLW8032 (Blitzwolf SHP5) handling of power loads below 6W. Default setting is 128 (#5756 )
2019-06-04 17:30:03 +02:00
22663fc10c
6.5.0.13 Add command SetOption38 6..255
...
6.5.0.13 20190527
* Add command SetOption38 6..255 to set IRReceive protocol detection sensitivity mimizing UNKNOWN protocols (#5853 )
2019-05-27 11:56:14 +02:00
4d070bfb15
Change default PowerDelta from 80% to 0% on new installations
...
Change default PowerDelta from 80% to 0% on new installations (#5858 , #5028 , #4813 , #4130 , #4145 , #3795 , #3778 , #3660 , #3648 )
2019-05-24 15:04:48 +02:00
ae3d7e0122
PWM using 10 bits resolution, LST_MAX created
2019-05-02 22:50:19 +02:00
5e810f1ff3
Add Shelly 2.5 overtemp functionality
...
* Add all temperature, humidity and pressure for global access
* Add Shelly 2.5 overtemp functionality
* Fix Shelly 2.5 I2C address priority issue when VEML6070 code is present by disabling VEML6070 for Shelly 2.5 (#5592 )
2019-04-15 18:12:42 +02:00
2aad0567bf
Change some defines to const
...
Change some defines to const
2019-03-30 16:29:27 +01:00
b7f89c0a8c
6.5.0.1 Change GUI data collection
...
6.5.0.1 20190319
* Change Web GUI sensor data collection
2019-03-19 17:31:43 +01:00
37e1b31937
Add support for sensor SCD30
...
* Add support for sensor SCD30 (#5434 )
* Add support for commands in sensor drivers
2019-03-10 13:33:32 +01:00
48f6b09987
Initialisation and updating of color mapping added
2019-02-24 23:48:03 +00:00
945e7000dd
Implement full color remapper
2019-02-24 21:03:33 +01:00
4492a14574
Added SetOption37 for RGB remapping
2019-02-24 12:07:15 +00:00
38b81302e3
sm16716: added config option for custom rgb order
2019-02-24 09:26:10 +04:00
4993d16ecb
Implement WifiConfig 7
2019-02-21 17:49:11 +01:00
cee9fee756
Make pwm scheme 0 sleep optional
...
Make pwm scheme 0 sleep optional (enabled by default)
2019-02-18 08:19:17 +02:00
d7b8a6453d
Added preprocessor constant for LT_SM16716 for improved code readability
...
Note that this differs from other LT_* in that it's not an enum
Ensure the SM16716 codepath is only taken when the top half of light_type is LT_SM16716
2019-02-01 19:41:12 -05:00
2c164a8b4b
6.4.1.13 Add boot loop offset
...
6.4.1.13 20190130
* Add command SetOption36 to control boot loop default restoration (#4645 , #5063 )
2019-01-30 14:34:31 +01:00
505c4794d1
6.4.1.11 Rewrite interlock
...
6.4.1.11 20190124
* Remove command SetOption14 as it has been superseded by command Interlock
* Remove command SetOption63 as it has been superseded by command Interlock
* Add command Interlock 0 / 1 / 1,2 3,4 .. to control interlock ON/OFF and add up to 8 relays in 1 to 4 interlock groups (#5014 )
2019-01-25 17:46:27 +01:00
9f030ae431
Change color temp with rotary when Button1 pressed
2019-01-15 00:45:19 +00:00
2aac0683be
Add support for Mi Desk Lamp
2019-01-14 22:53:15 +00:00
447ec6256e
6.4.1.4 Update Copyright (C) 2019
...
6.4.1.4 20190101
* Update Copyright (C) 2019
2019-01-01 13:55:01 +01:00
b2005fba40
introduce new api-call for dimmer-devices
2018-12-17 18:29:42 +01:00
dfa0d2ef11
Add Domoticz Selector for Fanspeed
...
Add support for iFan02 Fanspeed in Domoticz using a selector (#4517 )
2018-12-06 10:49:49 +01:00
24ef9ab6b8
Fix Compilation issue with STAGE Core
...
Now the Stage core has the the same STR macro defined in sonoff.h.
2018-12-03 17:38:31 -03:00
6050cd40f3
Merge sleep command
2018-12-01 18:47:25 +02:00
76829d4ced
6.3.0.11 Add delays
...
6.3.0.11 20181120
* Add delays removed in 6.3.0.9 (#4233 )
* Allow user definition of defines WIFI_RSSI_THRESHOLD (default 10) and WIFI_RESCAN_MINUTES (default 44)
* Add support for Fujitsu HVac and IrRemote (#4387 )
2018-11-20 14:10:32 +01:00
50f4f0300b
Update sonoff.h
...
Update default loop sleep delay from 10 to 50
2018-11-18 17:25:39 +01:00
4899178362
6.3.0.10 Add command SetOption36
...
6.3.0.10 20181118
* Add command SetOption36 0..255 milliseconds (10 default) to tune main loop dynamic delay
2018-11-18 16:49:02 +01:00
18997e841f
6.3.0.9 Add dynamic delay in loop
...
6.3.0.9 20181118
* Moved command SetSensorXX to debugging driver freeing user code space
* Add dynamic delay to main loop providing time for wifi background tasks
* Remove delays introduced in 6.3.0.1 (#4233 )
2018-11-18 15:02:52 +01:00
e284e78b4d
Add support for Armtronix dimmers
...
Add support for Armtronix dimmers. See wiki for info (#4321 )
2018-11-16 12:22:15 +01:00
04cc11b46d
Use correct index
2018-11-16 10:36:43 +01:00
7b6553d116
Merge remote-tracking branch 'origin/development' into armtronix
2018-11-16 09:31:58 +01:00
d5f3b8483c
Extent log buffer to 520 characters
...
* Extent log buffer to accomodate up to 8 DS18B20 sensors http JSON data (#4354 )
* Fix APDS9960 sensor use of log buffer
2018-11-15 14:24:19 +01:00
a3ee9e7492
Cleaned up code and settings
2018-11-11 16:58:21 +01:00
410e49a3c7
Added Armtronix dimmer support
2018-11-10 16:30:29 +01:00
c75ae78d88
6.3.0.5 Add code image
...
6.3.0.5 20181107
* Add code image and optional commit number to version
2018-11-07 15:03:41 +01:00
44d6714b69
Moved all func ptr tables to RAM
...
Moved all function pointer tables to RAM to check performance issues
2018-11-07 11:57:28 +01:00
9fef82736d
Prep drivers for management
...
Prep drivers for management
2018-11-07 10:30:03 +01:00
15148f290d
6.3.0.4 Add SetSensorXX
...
6.3.0.4 20181106
* Add command SetSensorXX 0/1 to disable/re-enable compiled xsns_XX_sensor.ino driver
2018-11-06 17:33:51 +01:00
2e1ba0194c
Move #define DRIVER_BOOT_DELAY to sonoff.h
2018-11-01 19:36:10 +02:00
Theo Arends
Stephan Hadinger
Gabor Simon
netpok
Andre Thomas
Colin Kuebler
dh.harald
Joel Stein
Adrian Scillato
wvdv2002