0e56044eb5
Add main loop load average
...
Add main loop avarage duty cycle measured against setoption36 value to telemetry data as LoadAvg
2018-11-24 18:12:49 +02:00
c436ed5d3d
Update boot delay code
...
Since the driver boot delay has been removed, this is a better strategy for getting a smoother boot cpu cycle vs loop delay.
2018-11-22 17:13:55 +02:00
d71ae77900
6.3.0.12 Change boot delays
...
6.3.0.12 20181122
* Remove delays introduced in 6.3.0.11 (#4233 )
* Add additional start-up delay during initial wifi connection
* Add support for I2C MGC3130 Electric Field Effect sensor by Christian Baars (#3774 , #4404 )
* Add initial support for Hass sensor discovery (#4380 )
2018-11-22 12:25:18 +01:00
23c16e58a9
Housekeeping
...
Housekeeping
2018-11-20 15:00:24 +01:00
e34a1f0719
Add wifi network scan
...
* Add command SetOption56 0/1 to enable wifi network scan and select highest RSSI (#3173 )
2018-11-19 18:07:25 +01:00
4899178362
6.3.0.10 Add command SetOption36
...
6.3.0.10 20181118
* Add command SetOption36 0..255 milliseconds (10 default) to tune main loop dynamic delay
2018-11-18 16:49:02 +01:00
18997e841f
6.3.0.9 Add dynamic delay in loop
...
6.3.0.9 20181118
* Moved command SetSensorXX to debugging driver freeing user code space
* Add dynamic delay to main loop providing time for wifi background tasks
* Remove delays introduced in 6.3.0.1 (#4233 )
2018-11-18 15:02:52 +01:00
9eacabc4f0
Delay initial flash write
...
* Stop enforcing flashmode dout but it is still mandatory
* Moved bootcount update (being first) flash write to 10 seconds after restart
2018-11-16 09:36:41 +01:00
877771c90a
6.3.0.8 Stop enforcing dout
...
6.3.0.8 20181115
* Stop enforcing flashmode dout. Still mandatory but this a chk for possible future flash corruption
2018-11-15 14:55:45 +01:00
4a7e7b0dbb
Change C functions with () to (void)
2018-11-14 15:32:09 +02:00
3ef78e8095
Revert "Moved command SetSensorXX"
...
This reverts commit 830319bc6e
2018-11-12 15:54:18 +01:00
830319bc6e
Moved command SetSensorXX
...
Moved command SetSensorXX to debugging
2018-11-12 15:09:09 +01:00
e2dd11b0bc
Consolidate LTrim into Trim
...
Consolidate LTrim into Trim
2018-11-12 12:33:49 +01:00
7a235cc8ef
Fix shelly2 ghost switching
...
Fix shelly2 ghost switching caused by lack of pull-up inputs (#4255 )
2018-11-10 10:48:28 +01:00
3332ab01a1
Revert "Add RF calibration on next restart"
...
This reverts commit 2a4d82f4b6
2018-11-08 16:33:34 +01:00
2a4d82f4b6
Add RF calibration on next restart
...
Add RF calibration on next restart
2018-11-08 14:21:45 +01:00
f9bddb6c54
Add flashchipid info
...
Add flashchipid info
2018-11-08 10:40:19 +01:00
61985ca16b
Add hex to flash info
2018-11-07 18:43:44 +01:00
c75ae78d88
6.3.0.5 Add code image
...
6.3.0.5 20181107
* Add code image and optional commit number to version
2018-11-07 15:03:41 +01:00
15148f290d
6.3.0.4 Add SetSensorXX
...
6.3.0.4 20181106
* Add command SetSensorXX 0/1 to disable/re-enable compiled xsns_XX_sensor.ino driver
2018-11-06 17:33:51 +01:00
28c1eed302
Fix baudrate when module changed
...
Fix baudrate when module changed
2018-11-06 11:48:04 +01:00
c9cf375c6c
Add checks for GPIO selections
...
Add more strict checks for GPIO selections
2018-11-05 17:27:02 +01:00
99ae0c9cab
Change wifi connection check
...
Change wifi connection check
2018-11-04 18:00:07 +01:00
14a7424e9b
Add command SetOption24
...
Add command SetOption24 0/1 to select pressure unit as hPa or mmHg (#4241 )
2018-11-04 16:55:12 +01:00
46a0a0afba
Add minutes to commands Timezone
...
Add minutes to commands Timezone to allow all possible world timezones
2018-11-01 13:00:05 +01:00
faab6f1221
tuya: modify WifiState() in support.ino to reflect not-connected-state instead of reimplementing it
2018-10-30 15:34:31 +01:00
6b86c473d9
Add token %hostname%
...
Add token %hostname% to command FullTopic (#3018 )
2018-10-29 12:38:44 +01:00
5c78561b07
6.2.1.20 Add mDNS delay option
...
6.2.1.20 20181028
* Add command SetOption35 0..255 (seconds) to delay mDNS initialization to control possible Wifi connect problems
2018-10-28 17:57:25 +01:00
2c02532e1c
6.2.1.19 Rename user_config.h
...
6.2.1.19 20181023
* Fix header file execution order by renaming user_config.h to my_user_config.h
* Fix Arduino IDE compilation warning regarding e-paper library
2018-10-23 15:51:51 +02:00
613ffde5c0
6.2.1.18 Add API.md
...
6.2.1.18 20181019
* Add more API callbacks and document API.md
2018-10-19 12:53:22 +02:00
cfdec25bcb
Add reset-button-handler vor tuya-dimmer
2018-10-18 16:02:40 +02:00
d1c807998f
Rewrite Tuya Dimmer code
...
Rewrite Tuya Dimmer code
2018-10-18 13:01:31 +02:00
d47ab92862
Fixxes and Add Tuya Dimmer
...
* Fix RfRaw and SerialSend5 regression from 6.2.1.15 (#4072 )
* Fix Sonoff Bridge RfRaw receive (#4080 )
* Add support for Tuya Dimmer (#469 , #4075 )
2018-10-16 11:21:44 +02:00
cd9987111e
Merge pull request #4075 from digiblur/development
...
Initial Tuya Dimmer Support
2018-10-16 09:46:16 +02:00
adf3ed56bf
Fix Bug for OTA URL if using core STAGE (2.5.0)
2018-10-15 23:27:43 -03:00
5894cd97fc
Initial TuyaDimmer Support
2018-10-15 18:32:14 -05:00
6b660026cd
Add cmnds Reset 4 and Reset 5
...
Add commands Reset 4 (reset to defaults but keep wifi params) and Reset 5 (as reset 4 and also erase flash) (#4061 )
2018-10-15 14:43:47 +02:00
5f9867a22f
Add command Reset 5
2018-10-15 00:10:02 +02:00
f109c36bbd
Add Reset 4 command to reset defaults but keep wifi config
2018-10-14 20:00:41 +02:00
c46ae74067
Add whitespace removal
...
Add whitespace removal from RfRaw and SerialSend5 (#4020 )
2018-10-14 12:53:11 +02:00
a33030b622
Fixed Compiler Warning for Core STAGE SDK 3.0.0
2018-10-11 10:54:34 -03:00
ba16e00e36
Add command WebRefresh
...
Add command WebRefresh 1000..10000 to control web page refresh in milliseconds. Default is 2345
2018-10-08 14:39:36 +02:00
efb328de09
Add PWM Freq Limits Config at Compile time
2018-10-07 14:27:09 -03:00
5bbec2617f
6.2.1.12 - Fixes Shelly1 and CSL
...
6.2.1.12 20181007
* Fix Shelly1 switchmode 3 and 4 when using pushbutton (#3989 )
* Add support for CSL Aplic WDP 303075 Power Socket with Energy Monitoring (#3991 , #3996 )
2018-10-07 12:37:03 +02:00
191df17b13
Add support for EXS Relay V5.0
...
Add support for EXS Relay V5.0 (#3810 )
2018-09-30 16:52:25 +02:00
6939d6eead
Fix Shelly Ghost and Rule sensors
...
* Change pinmode for no-pullup defined switches to pullup when configured as switchmode PUSHBUTTON (=3 and up) (#3896 )
* Add delay after restart before processing rule sensor data (#3811 )
2018-09-26 11:56:58 +02:00
bac33345a0
6.2.1.8 Extent status JSON
...
6.2.1.8 20180926
* Change status JSON message providing more switch and retain information
2018-09-26 10:13:44 +02:00
2029440fae
6.2.1.7 Fix NTPserver change
...
6.2.1.7 20180925
* Remove restart after ntpserver change and force NTP re-sync (#3890 )
* Release full Shelly2 support
2018-09-25 11:35:37 +02:00
ecd3175257
Prevent Command NtpServer to restart Tasmota
...
#3890
2018-09-24 16:16:14 -03:00
f65d8c0cbf
Fix possible array overflow
...
Fix possible array overflow (#3887 )
2018-09-24 11:44:40 +02:00
01ce1b0c91
Fix Shelly2 monitoring
...
Disable serial logging on Shelly2 as serial is being used by energy monitoring (#3878 )
2018-09-23 13:55:42 +02:00
f05fc71d67
Fix rule trigger POWER1#STATE
...
Fix rule trigger POWER1#STATE execution after restart and SetOption0 is 0 (#3856 )
2018-09-22 17:37:49 +02:00
557545cb56
Cleanup Driver
...
Cleanup Driver
2018-09-21 16:19:31 +02:00
846d7a911f
Add driverXX support for FUNC_COMMAND callback
2018-09-20 22:56:07 +02:00
bf7dcb8eec
6.2.1.3 Add SerialSend5
...
6.2.1.4 20180916
* Add command SerialSend5 to send raw serial data like "A5074100545293"
* Update MCP230xx driver
* Update Czech translation
* Update MP3 driver (#3800 )
* Add userid/password option to decode-status.py (#3796 )
* Fix syslog when emulation is selected (#2109 , #3784 )
* Fix Pzem2 compilation error (#3766 , #3767 )
2018-09-16 16:09:00 +02:00
8025f28409
Let syslog to be active when emulation is active too
...
solves issue https://github.com/arendst/Sonoff-Tasmota/issues/2109
2018-09-12 19:00:35 -03:00
4c41ea4461
Houskeeping
2018-09-09 14:31:40 +02:00
7cd9224819
6.2.1.3 - Change drop down list
...
6.2.1.3 20180907
* Change web Configure Module GPIO drop down list order for better readability
* Fix showing Period Power in energy threshold messages
* Fix ButtonRetain to not use default topic for clearing retain messages (#3737 )
2018-09-08 17:18:31 +02:00
f517755303
Prep for frequency display
...
Prep for energy frequency display and update xnrg_05_pzem2.ino with correct register values
2018-09-07 18:15:47 +02:00
3ccf83d1a6
Merge pull request #3711 from rgitzel/append-timezone
...
optionally append timezone to timestamp in JSON messages
2018-09-06 11:38:54 +02:00
359877489d
6.2.1.2 - Fix KNX PA exception
...
6.2.1.2 20180906
* Fix KNX PA exception. Regression from 6.2.1 buffer overflow (#3700 , #3710 )
2018-09-06 10:42:22 +02:00
9413ba9f47
optionally append timezone to timestamp in JSON messages
2018-09-05 14:51:12 -07:00
35d0e502c4
Some additions
...
* Add command Display to show all settings at once
* Add toggle function RGBW lights (#3695 , #3697 )
* Add user configurable GPIO02 and GPIO03 on H801 devices (#3692 )
2018-09-05 18:01:15 +02:00
ed1fd55d7f
Merge pull request #3692 from MadDoct/patch-3
...
Make tx and rx pins user selectable on the H801
2018-09-05 16:02:37 +02:00
36242e0e02
Add network information
...
Add network information to display start screen (#3704 )
2018-09-05 15:38:48 +02:00
e7ae727c65
Update sonoff.ino
2018-09-04 18:53:44 +01:00
07dafe1631
6.2.0.2 - Energy monitoring
...
6.2.0.2 20180904
* Rewrite energy monitoring using energy sensor driver modules
* Fix lost today and total energy value after power cycle (#3689 )
2018-09-04 16:22:34 +02:00
ababc351d7
prepare to allow h801 tx and rx pins to be gpio_user
2018-09-04 09:45:26 +01:00
2210bda2e6
Replace APMac with BSSId
...
Replace APMac with BSSId in state and status 11
2018-09-02 15:54:26 +02:00
5623924813
Add Wifi channel number
...
Add Wifi channel number to state message (#3664 )
2018-09-02 12:10:22 +02:00
c6a14c5fe7
Fix possible exception
...
Fix possible exception due to buffer overflow (#3659 )
2018-09-02 11:52:24 +02:00
2212af4860
Clear GPIO on multi boot loop
...
Clear GPIO on multi boot loop
2018-08-30 14:47:48 +02:00
f7c38f24f3
6.1.1.14 Add boot loop detection
...
Add boot loop detection and try to fix
2018-08-30 14:27:33 +02:00
3abdaaffb7
Revert "6.1.1.14 Add boot loop detection"
...
This reverts commit b9a875d6fb
2018-08-30 13:19:09 +02:00
b9a875d6fb
6.1.1.14 Add boot loop detection
...
Add boot loop detection and try to fix
2018-08-30 12:22:24 +02:00
55b43734d8
6.1.1.13 - Fixes
...
6.1.1.13 20180828
* Fix 6.1.1.12 regression of Mem and Var default handling (#3618 )
* Optimizations
2018-08-28 11:10:32 +02:00
f8666c0410
Some requested additions
...
* Add optional MQTT_TELE_RETAIN to Energy Margins message (#3612 , 3614)
* Add Individual HSBColorX commands (#3430 , #3615 )
* Add RuleX debug options 8,9,10 (StopOnError) to control RuleX execution status after an exception restart (#3607 )
2018-08-28 10:26:33 +02:00
9b54ab9038
Some optimizations
...
Some optimizations
2018-08-27 16:07:23 +02:00
d4931f7b11
Fix handling default names Pt.2
...
Fix handling default names Pt.2
2018-08-27 14:53:09 +02:00
9978381c94
Fix handling deafult names
...
Fix handling use of default names when using names starting with shortcut character (#3392 , #3600 )
2018-08-27 13:06:22 +02:00
d69e88b50b
6.1.1.12 - Add debounce time
...
6.1.1.12 20180827
* Add commands ButtonDebounce 40..1000 and SwitchDebounce 40..1000 to have more control over debounce timing. Default is 50mS (#3594 )
2018-08-27 12:01:20 +02:00
ea43540b43
Update WS2812 driver
...
Update WS2812 driver for new state time
2018-08-26 17:32:49 +02:00
bbd2529914
Sleep fixes part 2 and 3 of 3
...
* Change scheduler phase 2/3 - Fixed when sleep is enabled: Blinktime (#3581 )
* Change scheduler phase 3/3 - Some sensor update timings: AdcEvery 200 -> 250, Senseair 300 -> 250, SDM120 300 -> 250, SDM630 300 -> 250
2018-08-26 17:10:18 +02:00
f090050e69
6.1.1.11 - Sleep fixes part 1
...
6.1.1.11 20180826
* Change scheduler phase 1 - Fixed when sleep is enabled: Uptime, Delay, PulseTime and TelePeriod (#3581 )
2018-08-26 15:42:35 +02:00
4defda2f1a
Rewrite some GPIO options
...
Rewrite GPIO options ButtonXn, SwitchXn and CounterXn to select INPUT mode instead of INPUT_PULLUP
2018-08-25 13:08:06 +02:00
ae6fcd4d60
Change sleep command
...
Change command sleep from restart after change to not restart after change (#3554 )
2018-08-24 16:38:55 +02:00
ef842daa32
Fix test
...
Fix test
2018-08-23 17:47:45 +02:00
6a5c0d29e8
6.1.1.9 - Fixes and Additions
...
6.1.1.9
* Allow user override of define MAX_RULE_TIMERS (#3561 )
* Allow user override of define MAX_RULE_VARS
* Add GPIO options ButtonXn, SwitchXn and CounterXn to select INPUT mode instead of INPUT_PULLUP (#2525 )
* Fix OtaMagic when file path contains a dash (-) (#3563 )
2018-08-23 16:05:51 +02:00
52413f103e
Fixed OtaMagic handling having minus "-" within OtaUrl
2018-08-23 14:31:50 +02:00
6d98864a04
Fix iFan02 power on state
...
Fix iFan02 power on state (#3412 , #3530 )
2018-08-20 15:51:46 +02:00
bb87f99ee0
Fix version numbering
...
Fix version numbering
2018-08-17 11:10:21 +02:00
3efb84fb93
Change version representation
...
Change version representation from 1.1.1a to 1.1.1.1 for better change reference
2018-08-12 14:05:15 +02:00
9147635d5c
Add ifan02 Fanspeed +/-
...
Add ifan02 Fanspeed +/- as command option to increase or decrease fenspeed (#3415 )
2018-08-11 16:12:10 +02:00
55ef063c0e
Add command SerialSend4
...
Add command SerialSend4 to send binary serial data (#3345 )
2018-07-28 15:43:13 +02:00
76c102c09c
Support send / receive of binary serial data
2018-07-27 12:17:34 +02:00
cb192c5c2d
Update decode-status.py
...
Update decode-status.py
2018-07-25 12:42:53 +02:00
9376b6f7c0
Fix invalid JSON
...
Fix command TimeDst/TimeStd invalid JSON (#3322 )
2018-07-25 10:04:35 +02:00
99e81ba86e
Fix CCS811 env compensation
...
Fix CCS811 temperature and humidity compensation
2018-07-24 18:41:50 +02:00
cdae4f3f46
Add support for CCS811
...
Add support for CCS811 sensor (#3309 )
2018-07-23 17:42:12 +02:00
d21a04e872
ccs811
...
completely new from arends/development
2018-07-23 16:27:15 +02:00
612374cfbf
Revisit Timers off/on
...
6.1.1c
* Add command Timers 0/1 to globally disable or enable armed timers (#3270 )
2018-07-20 16:12:37 +02:00
afdb197a6c
v6.6.1b - Change wifi options
...
6.1.1b
* Add default Wifi Configuration tool as define WIFI_CONFIG_NO_SSID in user_config.h if no SSID is configured (#3224 )
* Add user selection of Wifi Smartconfig as define USE_SMARTCONFIG in user_config.h
* Add user selection of WPS as define USE_WPS in user_config.h in preparation for core v2.4.2 (#3221 )
* Change default Wifi config option from WPS to Wifi Manager if WPS is disabled
* or Wifi Smartconfig if webserver is disabled
* or Wifi Serial input if Smartconfig is disabled
* Remove WPS and SmartConfig from sonoff-minimal saving 56k code space
2018-07-15 15:21:48 +02:00
f75ab4f25f
v6.1.1a - Sync with v6.1.1
...
Sync with v6.1.1
2018-07-14 18:07:25 +02:00
e876b5aa77
v6.1.0b - WPS optional
...
6.1.0b
* Add user selection of WPS as define USE_WPS in user_config.h in preparation for core v2.4.2 (#3221 )
* Change default Wifi config option from WPS to Wifi Manager if WPS is disabled (or Wifi Smartconfig if webserver is disabled)
* Remove WPS from sonoff-minimal saving 33k code space
* Revert wifi changes implemented in v6.0.0a due to possible bad initial wifi connections
2018-07-14 15:35:56 +02:00
bee95c5b56
Add TM1638 switch support
...
Add TM1638 switch support (#2226 )
2018-07-12 14:52:35 +02:00
f9ce86a6e8
Add wifi/mqtt status blinkyblinky
...
6.1.0a
* Add wifi and mqtt status led blinkyblinky to be disabled by SetOption31 1. Does not work when LedPower is On (deliberate) (#871 , #2230 , #3114 , #3155 )
* Remove not needed functionality from Sonoff-minimal to save space
2018-07-07 17:30:58 +02:00
2058b9fa95
Updated to v6.1.0a
...
Updated to v6.1.0a
2018-07-06 18:00:50 +02:00
d08cefb0df
Rewrite BME680 driver
...
Rewrite BME680 driver now using latest Bosch BME680 library (#2969 )
2018-07-04 18:41:00 +02:00
c896437124
v6.0.0c - Add spare SetOptions
...
6.0.0c
* Add support for bitflags SetOption50 .. SetOption81 (#3118 )
2018-07-03 12:48:56 +02:00
c8871ae9e8
Fix iFan02 friendlyname
...
Fix iFan02 friendlyname
2018-07-01 15:18:50 +02:00
d3d876f030
Add Sonoff iFan02 support
...
Add support for Sonoff iFan02 as module 44 introducing command FanSpeed
0..3 (#2839 )
2018-07-01 15:06:44 +02:00
8b7645b05d
Quick fix to re-instate iFan02 RC
...
Quick fix to re-instate iFan02 RC
2018-06-30 19:09:48 +02:00
eb42ec6a1c
Add restriction
...
Add restriction
2018-06-30 18:54:22 +02:00
0fc019e418
Initial Sonoff iFan02 support
...
Initial Sonoff iFan02 support (#2839 )
2018-06-30 18:50:10 +02:00
2a62356172
Allow increase in friendlynames
...
Allow increase in friendlynames (#3098 )
2018-06-30 14:17:26 +02:00
1c6f752ba8
Add enforce Hass discovery as light group
...
Add command SetOption30 to enforce Hass discovery as light group (#1784 )
2018-06-29 11:15:27 +02:00
3e96e04690
Add experimental (untested) TM1638 support
...
Add experimental (untested) TM1638 switch support (#2226 )
2018-06-28 17:40:37 +02:00
6e9602418d
v6.0.0b - Support up to 8 switches
...
6.0.0b
* Change number of switches from 4 to 8 (#2885 , #3086 )
2018-06-28 14:28:14 +02:00
20a53950ff
Fix possible wifi connection problem
...
Fix possible wifi connection problem (#1366 )
2018-06-28 12:25:50 +02:00
54ef429fdc
Add increment and decrement counter
...
6.0.0a
* Add increment and decrement value to command Counter (#2838 )
2018-06-26 17:17:23 +02:00
dc1c2abda7
Add heap and stack debug information
...
Add heap and stack debug information
2018-06-26 11:48:09 +02:00
e818f0da55
Fix rules induced LWT message
...
Fix rules induced LWT message
2018-06-25 18:00:20 +02:00
176c39dfe3
Add hex/decimal receive control for RF and IR
...
6.0.0a
* Add command SetOption28 to switch between hex or decimal Sonoff Bridge
RF received data format (#3008 )
* Add command SetOption29 to switch between hex or decimal IR received
data format
2018-06-25 12:33:23 +02:00
d4119fe54d
Add SnfBrdg EFM8BB1 fw tools
...
6.0.0a
* Add support for uploading Sonoff Bridge firmware found in
tools/fw_efm8bb1 folder build by Portisch using Web Gui File Upload
(#2886 )
* Add command RfRaw to control Portisch firmware features
2018-06-04 18:10:38 +02:00
976f167ae3
Minor fixes
...
Minor fixes
2018-06-03 17:09:10 +02:00
d4e414a6d5
v6.0.0a - Add CRC to Settings
...
6.0.0a
* Add CRC to Settings making future upgrades more fail-safe
* Remove version 3, 4 and pre 5.2 settings auto-upgrade. See
https://github.com/arendst/Sonoff-Tasmota/wiki/Upgrade#migration-path
* Change default CFG_HOLDER from 0x20161209 to 4617 (=0x1209) - no
impact on default upgrades
2018-06-02 16:59:09 +02:00
ed56322f12
Add command source information
...
5.14.0b
* Add source information to command execution to be shown with logging
option 3 (#2843 )
2018-05-28 15:52:42 +02:00
41496acdee
File renames and Add command WebSend
...
5.14.0b
* Add command WebSend [<host>(:<port>,<user>:<password>)] <command>
(#2821 )
2018-05-28 11:35:23 +02:00
9f329d5fb0
Add rule support for IrReceive and RfReceive
...
5.14.0b
* Add rule support for IrReceive and RfReceive (#2758 )
2018-05-24 16:23:20 +02:00
ca08b77aad
Add two more rule sets
...
5.14.0b
* Increase rule storage space to 3 rule sets of 512 characters
using commands rule1, rule2 and rule3
2018-05-24 14:25:52 +02:00
4fbc51a874
Add optional token %id% to fulltopic
...
5.14.0a
* Add optional token %id% substituting the unique MAC address for topic
names by Michael Graf (#2794 )
2018-05-21 17:52:24 +02:00
496b41dfbd
Add compiled feature information
...
5.14.0a
* Add compiled feature information to Status 4
2018-05-17 15:36:45 +02:00
457f438bac
v5.14.0a - Sync with release
2018-05-15 17:13:51 +02:00
12ffefe081
Add more user input validation
...
5.13.1c
* Add more user input validation to commands TimeStd and
TimeDst
2018-05-15 12:32:53 +02:00
d7afc664f5
Add user entry DST/STD
...
5.13.1c
* Add user entry DST/STD using commands TimeStd and TimeDst
with options like 0,0,3,1,2,120 (#2721 )
2018-05-14 23:22:29 +02:00
20eb04b7ef
v5.13.1b - Prep for user entry DST/STD
...
Prep for user entry DST/STD (#2721 )
2018-05-13 19:43:48 +02:00
a6e0156576
Add SetOption16 Power legacy/indexed mode
...
5.13.1a
* Add SetOption26 to enforce use of indexes even when only one relay is
present (#1055 )
2018-05-13 17:38:44 +02:00
0aea9ba572
Add hardware serial option to MHZ-19
...
Add hardware serial option to MHZ-19 (#2659 )
2018-05-09 13:43:22 +02:00
016b1dd029
Optimize command handling
...
Optimize command handling
2018-05-09 10:49:43 +02:00
0c0f2236bd
Lost updates
2018-05-06 16:18:17 +02:00
d935004e4a
Fix rule backlog issue and add On/Off test
...
5.13.1a
* Fix rule power trigger when no backlog command is used (#2613 )
* Add rule state test for On/Off in addition to 0/1 (#2613 )
2018-05-06 16:07:42 +02:00
036b958f76
v5.13.1a - Update otaurl
...
5.13.1a
* Change user_config.h otaurl to
http://sonoff.maddox.co.uk/tasmota/sonoff.bin (#2588 , #2602 )
2018-05-02 10:15:50 +02:00
d629b8ce2a
v5.13.0a - Fix JSON buffer size
...
5.13.0a
* Fix JSON buffers size too small for execution in some
situations (#2580 )
2018-05-01 11:28:36 +02:00
962a50452c
v5.13.0
...
Sync with master
2018-04-30 17:35:42 +02:00
040a7adaf1
v5.12.0o - Fix Energy Today overflow
...
5.12.0o
* Fix Energy Today and Yesterday overflow (#2543 )
2018-04-30 12:07:48 +02:00
67aaa2777c
Revert "Fix Energy Today and Yesterday overflow"
...
This reverts commit c86a9f8e53
2018-04-30 11:10:38 +02:00
c86a9f8e53
Fix Energy Today and Yesterday overflow
...
5.12.0o
* Fix Energy Today and Yesterday overflow (#2543 )
2018-04-29 15:29:43 +02:00
c835235141
v5.12.0n - Change ADS1115 and Counter JSON
...
5.12.0n
* Change ESP8266 Analog JSON message from {"Analog0:123"} to
{"ANALOG":{"A0:123"}} to accomodate rules (#2560 )
* Change Counter JSON
message from {"Counter1":0,"Counter3":0} to {"COUNTER":{"C1":0,"C3":0}}
to accomodate rules
* Change ADS1115 JSON message from
{"ADS1115":{"Analog0":123,"Analog1":123}} to
{"ADS1115":{"A0":123,"A1":123}}
2018-04-28 15:55:38 +02:00
4675dbea1c
Add rules variables and teleperiod trigger
...
5.12.0m
* Add rule variables and teleperiod trigger to accomodate user HA
messages
2018-04-27 18:06:19 +02:00
f9c702f8eb
v5.12.0m - Add MQTT_TELE_RETAIN
...
5.12.0m
* Add define MQTT_TELE_RETAIN compile option default set to 0 (#1071 )
2018-04-25 12:06:53 +02:00
andrethomas
Theo Arends
Joel Stein
Adrian Scillato
digiblur
Rodney Gitzel
MadDoct
Norbert Richter
Theo Arends
Erik
gemu2015