be88e701d9
Add commands to allow setting of timeprop parameters ( #19310 )
...
* add: commands to set timeprop settings
* Update my_user_config.h
* fix: properly generated json response to commands
2023-08-15 09:43:55 +02:00
877d4250bb
Removes software based no load threshold. ( #19302 )
...
Lowers ADE7953 builtin no load detection threshold to be able to measure 5 watt power levels.
2023-08-14 10:08:16 +02:00
f40f4a1947
[DS18x20] Enhance use of aliases ( #19026 )
...
* [DS18x20] Enhance use of aliases
`defineDS18x20_USE_ID_AS_NAME`:
Always show part of the address, even for one sensor
`#define DS18x20_USE_ID_ALIAS`:
The command `DS18Alias` can now be use with alphanumeric aliases, which replace the sensor name
* [DS18x20] change to calloc()
2023-08-12 14:57:58 +02:00
df1a526f02
fix: properly detect device is offline after maximum misses reached ( #19298 )
2023-08-12 11:32:29 +02:00
b5cc48dd64
ESP32: pass flashmode at build time to macro definition ( #19299 )
...
* pass flashmode at build time to macro definition
* fix 8266 builds
2023-08-12 11:31:06 +02:00
9eb184c30e
Improvements to PID controller driver ( #19285 )
...
* add: update DEBUG_THERMOSTAT to only control the virtual switch
Also, debug output is still generated but end user can control this debug level 3
* add: debug output of main controller parameters when thermostat enabled
Also, add units for debug outputs added to make them more intelligible
* Update xdrv_39_thermostat.ino
* add: debug message when sensor is detected as not alive
fix: display thermostat number in debug messages
* add: log message prefix string for thermostat
* Update xdrv_39_thermostat.ino
fix: typos in comments
add: debug messages
* add: debug prefix for thermostat
* add: debug prefix added to output lines
* fix: comment typos and small grammatical changes for clarity
* add: debug prefix 'THE' added to debug output
* add: display PID status and key info on web output
* fix: remove extraneous comments that included unused code fragments
* add: local sensor handling improvements
add: define a local sensor name
add: define the local sensor measurement parameter
add: limit sensor not seen error message to every 60 seconds to avoid flooding the logs
add: include interval since which sensor data was last updated
fix: properly update the maximum interval time so missing sensor data is properly alerted
* Update xdrv_49_pid.ino
2023-08-10 16:20:06 +02:00
7544d2f23c
fix IRAM_ATTR specified both in function declaration and definition ( #19286 )
2023-08-10 12:19:18 +02:00
c3fadde3e8
Improvements to thermostat debug output ( #19279 )
...
* add: update DEBUG_THERMOSTAT to only control the virtual switch
Also, debug output is still generated but end user can control this debug level 3
* add: debug output of main controller parameters when thermostat enabled
Also, add units for debug outputs added to make them more intelligible
* Update xdrv_39_thermostat.ino
* add: debug message when sensor is detected as not alive
fix: display thermostat number in debug messages
* add: log message prefix string for thermostat
* Update xdrv_39_thermostat.ino
fix: typos in comments
add: debug messages
* add: debug prefix for thermostat
* add: debug prefix added to output lines
* fix: comment typos and small grammatical changes for clarity
* add: debug prefix 'THE' added to debug output
2023-08-08 10:55:05 +02:00
76aa6747a5
more idf5.1 preps: Berry SPI ( #19273 )
2023-08-06 21:10:36 +02:00
7488ed03f0
Tasmota based on Arduino 3.0.0 ( #19270 )
2023-08-06 13:44:28 +02:00
0b3d6fd146
Prepare for Arduino v3 / esp-idf v5 2nd batch ( #19265 )
2023-08-05 20:34:24 +02:00
e52c6105c6
Bump version to v13.0.0.4
2023-08-05 15:41:12 +02:00
5c8c7cdfca
Prepare for Arduino v3 / esp-idf v5 ( #19264 )
2023-08-05 15:11:10 +02:00
ab9a519d32
Update ru_RU.h ( #19214 )
2023-08-05 14:52:25 +02:00
959d105413
Change shutterbutton hold behavior with grouptopic ( #19263 )
...
* skip stop on hold if grouptopic
If shutterbutton is defined with a grouptopic send on HOLD, there is no stop on releasing the button. All shutters will move to defined position
* do not stop on hold release if group submitt
If mqtt broadcast is defined on hold then release the hold button will not anymore stop the local shutter. All shutter will move to defined position
2023-08-05 14:51:56 +02:00
7c3c3855c4
Fix console Firefox layout
2023-08-05 12:35:03 +02:00
fc798540b7
Fix console min height
2023-08-05 11:56:06 +02:00
362326f004
Zigbee Berry minor fix and cleaning ( #19257 )
...
* Zigbee Berry minor fix and cleaning
* Fix compilation
2023-08-05 09:50:39 +02:00
732e4106b8
add wifitest3 ( #19259 )
2023-08-04 20:17:36 +02:00
e2c79b45e4
Save some more code bytes
2023-08-04 17:24:05 +02:00
7736ba8af1
Change console height
...
Change console height from default 318 pixels to viewport (#19241 )
2023-08-04 16:11:58 +02:00
6572f0ed39
Fixing SHUTTERINVERT issues ( #19243 )
...
* fix wrong inverted shutter
* fix inverted shutter for esp32
2023-08-03 11:55:20 +02:00
5e591ef7db
Integrate MAX17043 driver mechanisms in xsns_110 ( #19219 )
2023-08-03 11:54:41 +02:00
df50a56c25
Fade would fail when the difference between start and target would be too small ( #19246 )
2023-08-02 17:48:12 +02:00
355b1e3b74
unsigned overflow fixed ( #19221 )
...
fixed overflow on negative value with dimmer 100%
2023-07-30 15:01:21 +02:00
2c15cfe4da
Reduced log level for TeleInfo ( #19216 )
2023-07-29 23:09:03 +02:00
fb45e73384
Four files which used #ifdef EPS8266 instead of #ifdef ESP8266 - which e.g. broke the MFRC522 functionality between 12.5 and 13.x. ( #19209 )
2023-07-29 16:50:27 +02:00
f2ab3b36a9
Zigbee decode Aqara 0000/FF01 attribute 03 as Temperature ( #19210 )
...
* Zigbee decode Aqara 0000/FF01 attribute 03 as Temperature
* Changed to AqaraTemperature
2023-07-29 14:19:15 +02:00
de3b0a4b00
ensure minimum interrupt time ( #19211 )
...
prevent interrupts <30 micro seconds because sometimes see crashes on esp8266.
esp32 stop of interrupt >30microseconds and < 105microseconds
2023-07-29 14:15:00 +02:00
11f056040e
Make TCPStart ip filter more IPv6 friendly ( #19199 )
2023-07-26 22:52:48 +02:00
1a91dc441b
Berry improve tasmota.scale_uint() ( #19197 )
2023-07-26 22:31:22 +02:00
9f16f09f29
Berry `mqtt.publish` now distinguishes between `string` and `bytes` ( #19196 )
2023-07-26 19:54:14 +02:00
978a21240c
Update changelogs
2023-07-24 15:30:48 +02:00
0ddcea9905
Add alternative for PCA9685
...
Add alternative for PCA9685 as define PCA9685_V2 (#18805 )
2023-07-24 15:11:20 +02:00
17cf73595f
Refactor MAX17043 driver
...
Refactor MAX17043 driver optional enable library (default off providing smaller footprint (-250 bytes)
2023-07-24 14:28:57 +02:00
f626539c18
Refactor MAX17043 driver
2023-07-24 12:29:43 +02:00
c5be85f443
Update de_DE.h
2023-07-23 14:13:23 +02:00
994c105bda
fix empty line problem ( #19171 )
2023-07-23 11:55:01 +02:00
547169c57d
changing reference to xsns109 ( #19170 )
2023-07-23 11:30:44 +02:00
31c3555d4d
Update italian language ( #19169 )
2023-07-23 09:39:17 +02:00
6d3aedcafe
Berry SK6812_GRBW crash ( #19166 )
2023-07-22 21:51:37 +02:00
421c95a51b
Update change logs
2023-07-22 14:55:20 +02:00
bc41500d9c
MAX17043 sensor integration ( #18788 )
...
* Restart MAX17043 from the scratch
* revert change
* Changed battery capacity in charge (capacity is the Ah value of the battery, this degrades over time when battery ages)
* merge
* Changing xsns_109 to 110
* fix nr
* removed old xsns109
* Update I2CDEVICES.md
* clean-up usage of Interface
2023-07-22 13:33:47 +02:00
973ce106e7
Fix compilation ( #19134 )
2023-07-22 11:28:23 +02:00
c7a22f175b
Update changelogs
2023-07-21 14:55:06 +02:00
b149443691
Fix default battery level
...
- Fix default battery level (#19160 )
- Bump version to v13.0.0.3
2023-07-21 14:35:22 +02:00
758b0237b4
Matter latency improvement for single attribute reads and single commands ( #19158 )
2023-07-20 21:26:55 +02:00
d1a4296867
New DEEPSLEEP topic for HA + Battery Level % support ( #19134 )
...
* New LWT on deepsleep
To allow better integration into HA LWT topic will report details of sleep status:
16:54:04.388 MQT: hm/tele/ESP_3284D1/LWT =
{"Sleep":{"Time":"2023-07-17T16:55:03","Sleep":1689612844,"Wakeup":1689612903}}
* Revert LWT back to non JSON
Send DeelSleep on LWT
Send Deepsleep parameters on topic DeepSleep
* Setting default for batteryLevel
* Enable BatteryPercentSet
Changing the battery level e.g. by rule
* Added Battery % to status message
* added battery_level_percent
* Added battery % support in STATE message
* Enable setting battery level
101 is reserved for power-plug. No battery Level reported
* Setting default for battery Level
101 is reserved for power plug
0..100 normal battery values
* Revert back LWT to Offline
Removed "DeepSleep" LWT status until further decision is made. Current implementation is technical sufficient for HA to detect a battery powered device
* Added discovery message after deepsleep change
* Added discovery for battery and deepsleep
2023-07-20 09:51:08 +02:00
3da5124348
Berry add AES CCM decrypting in a single call to avoid any object allocation ( #19153 )
2023-07-19 21:15:08 +02:00
2a3690b866
Berry `tasmota.loglevel()` and `tasmota.rtc_utc()` for faster performance ( #19152 )
2023-07-19 20:58:50 +02:00
91f15d228b
Zigbee DIYRuZ_Geiger ( #19151 )
2023-07-19 20:41:49 +02:00
6382c2806c
More user-friendly defaults for DisplayMode and DisplayDimmer ( #19138 )
...
Changing default for DisplayMode from 1 to 0. Users are getting confused by the display doing something they did not ask for (and not being aware of DisplayMode). This got worse with LVGL/HASPmota displays becoming common, with users having much less reason to dive into the old DisplayXxxxx commands. And it may even be hard to see that it is even a display of time/date causing the display to flicker.
Changing default for DisplayDimmer from 10% to 50%. The low brightness of 10% is not always easy to see, especially in daylight. 50% is generally better, while not going "full blast" with 100%.
2023-07-18 08:26:51 +02:00
ada754c582
Berry add `energy.update_total()` to call `EnergyUpdateTotal()` from energy driver ( #19117 )
2023-07-15 17:06:10 +02:00
ebca2f0a07
Zero-Cross Dimmer fixes ( #19109 )
...
* Fix Zero-Cross flickering on Savedata
* Fix reboot on DIMMER usage with Zero-Cross
* Fix Flickering on dimmer 0
2023-07-14 09:10:20 +02:00
9638beacec
Fix possible buffer overflow
2023-07-12 12:45:02 +02:00
5b6a25a7a0
Fix driver config backup and restore
...
Fix driver config backup and restore (#18295 )
2023-07-12 10:52:58 +02:00
889e6ea54d
Fix driver config restore
2023-07-11 16:12:04 +02:00
258976c014
Verify correct functionality
2023-07-10 18:14:23 +02:00
43bc81010f
Configuration file save and restore .xdrvsetXXX
...
Configuration file save and restore now backup and restore ``.xdrvsetXXX`` files too (#18295 )
2023-07-10 16:03:32 +02:00
b1cc87d24f
File UI changes ( #19014 )
...
* Remove recursion into folders on Manage Files. May be enabled with UFILESYS_RECURSEFOLDERS_GUI. On Edit of a file, Save and Magane btuttons return to the folder containgint the file being edited. On delete file, UI returns to the folder that the deleted file was in.
* Make newfile put in in the current folder, and return to current folder on save of manage button.
* Add folderOnly and FileOnly functions to reduce code duplication.
Enable folder delete.
Enable folder listing to be aborted (x in browser)
Disbale ESP32 Download Task. Needs attention.
Allow folder create from newfile name.
2023-07-10 10:27:20 +02:00
05d589f2d7
Set ESP32-C3 max supported ADC channels to 5
2023-07-08 18:04:13 +02:00
ac4c4505a5
Bump version v13.0.0.2
...
Update changelogs
2023-07-08 17:37:12 +02:00
f726c904ab
Enable ESP32 shutter driver
...
Enable ESP32 shutter driver (#18295 )
2023-07-08 17:21:06 +02:00
d9d9ca2651
fix modbus-tcp, add U32,U64 etc ( #19063 )
2023-07-07 19:50:51 +02:00
8ce7cb4ccd
Enhance ZC-Dimmer for falling and leading edge dimmer ( #19054 )
...
* Update tasmota_types.h
* Update xdrv_68_zerocrossDimmer.ino
2023-07-07 19:50:36 +02:00
57c4825ccd
`BrRestart` now supports web handlers to work after Berry restart ( #19057 )
2023-07-06 21:37:46 +02:00
862edddb56
Fix BUG: Zigbee devices cannot be added through routing nodes ( #19036 )
2023-07-06 21:10:57 +02:00
f56307e321
Fix to Partition_Wizard for shelly ( #19056 )
2023-07-06 20:59:50 +02:00
f462fa772d
Create GC9A01_display.ini ( #19043 )
2023-07-06 16:05:38 +02:00
492759567a
Partition Wizard is now able to convert to safeboot from Shelly partition layout ( #19034 )
2023-07-05 09:55:17 +02:00
522e6cf234
Implement deepsleep(0)
...
Implement deepsleep(0) as command ``restart 9`` (#19024 )
2023-07-03 21:07:45 +02:00
fc9065d4c8
Fix miel_hvac
...
Fix miel_hvac (#18923 )
2023-07-03 11:55:21 +02:00
d72f3b9978
Command ``BrRestart`` to restart the Berry VM (experimental) ( #19003 )
...
* Command ``BrRestart`` to restart the Berry VM (experimental)
* Add web button for Berry Restart
2023-07-02 21:52:01 +02:00
85aed3a17d
Remove phase_count_virtual
2023-07-01 14:31:03 +02:00
139ac367f0
Add support for energy dummy relays
...
Add support for energy dummy relays using SO48
2023-07-01 14:25:05 +02:00
6dd8aabeef
Cleanup scripter logging
2023-07-01 14:04:27 +02:00
3edb5bb096
Move SD card init up
...
Move SD card init up (#18934 )
2023-07-01 12:48:33 +02:00
2705374160
add Energy.phase_count_virtual to berry energy module ( #19004 )
...
* add Energy.phase_count_virtual to berry energy module
* Update xdrv_52_3_berry_energy.ino
* Update xdrv_52_3_berry_energy.ino
2023-06-30 22:19:59 +02:00
ad404dfc0c
Allow disable of frequency
...
Allow disable of frequency in dummy driver
2023-06-30 11:55:48 +02:00
1e3b41dd2d
Fix PCF8574 mode2 init using scripts
...
Fix PCF8574 mode2 init using scripts (#18934 )
2023-06-30 11:37:20 +02:00
58e13edea0
Change loglevel message
2023-06-30 11:31:59 +02:00
ca452c5e43
Add Energy->phase_count_virtual
2023-06-30 11:14:37 +02:00
465ae023ab
Update change logs
2023-06-29 14:10:49 +02:00
eb655a4a8f
Add support for SGP41 TVOC/NOx Sensor ( #18880 )
...
* Initial support for SGP41
* Removing delay() use from SGP4x driver
* Using i18n for TVOC/NOx raw values as well
2023-06-29 09:04:08 +02:00
504b51a9b4
Add command ``Delay -1``
...
Add command ``Delay -1`` to wait until next second (#18984 )
2023-06-28 11:53:23 +02:00
a51096e400
update light when `VirtualCT` is invoked ( #18972 )
...
Co-authored-by: jonschz <jonschz@users.noreply.github.com>
2023-06-27 14:23:44 +02:00
7892a38795
add HybridControllerPhase to json payload ( #18842 )
2023-06-26 21:56:07 +02:00
6ebd447bf2
Add files via upload ( #18957 )
2023-06-26 20:22:21 +02:00
0930bbddf5
Fix ESP32 Matter support
2023-06-26 12:38:29 +02:00
d9a66547aa
Bump version v13.0.0.1
2023-06-26 11:12:31 +02:00
339c1cedb7
Zigbee firmware for Sonoff-ZB-Pro v20230507 ( #18968 )
2023-06-25 21:24:08 +02:00
99a0f2add1
MI32 legacy: Allow submitting WiFi credentials via BLE using Berry ( #18962 )
2023-06-25 14:31:04 +02:00
3642d8ef37
fixes TS_FLOAT ( #18961 )
2023-06-25 12:08:42 +02:00
b419ae3a92
add matter as a default option in most env ( #18942 )
2023-06-24 11:39:26 +02:00
36de007909
Berry replace `string.format`with `format` ( #18945 )
...
* Berry replace `string.format`with `format`
* remove import.string
2023-06-23 18:33:31 +02:00
04521e5542
Change format of KNX Group address ( #18928 )
...
"%d.%d.%d" -> "%d/%d/%d"
Co-authored-by: Norbert <Noschvie@users.noreply.github.com>
2023-06-22 21:56:55 +02:00
635e240293
Update Tuya_ZG-204ZL.zb ( #18922 )
...
Added in mapping for battery level on ZG-204ZL
2023-06-21 10:33:39 +02:00
1f5c1baeae
Fix NeoPool NPFiltration switch result ( #18871 ) ( #18908 )
2023-06-19 22:53:51 +02:00
5059a11b9f
Add entry for Growatt 12KTL-3S ( #18898 )
2023-06-18 20:26:42 +02:00
28861821a6
Zigbee fixed regression with SetOption101 ( #18884 )
2023-06-14 22:46:18 +02:00
156a3551b0
Repair SHUTTER Shelly 2.5 with manual relay change on switches ( #18877 )
...
* Repair manual relay change
* Repair manual relay change
2023-06-14 16:14:10 +02:00
69b2b93d61
Matter UI and logs polishing ( #18866 )
2023-06-12 19:45:18 +02:00
0e3b32e848
Readded up/down/open/close commands ( #18864 )
...
* Update xdrv_27_shutter.ino
* fix shutterposition with up/down/open/close
2023-06-12 19:09:19 +02:00
2f616eef2c
make IRHVAC send incremental changes. ( #18310 )
...
This change will allow mqtt messages simpler by allowing something like
`publish cmnd/ir-bridge/IRHVAC {"Power": "On"}`.
The simpler format is required for working with mqtt clients like
iotMQTTPanel or similar on android.
Limitations:
- Requires full message be sent at-least once. I work around this with
a `system#boot` rule
- Gets messy with multiple devices. I have only one AC per room, and
this doesn't doesn't interfere with other IR devices.
TODO:
- [ ] Change the build flag `INCREMENTAL_IRAC`to a `SetOption`
- [ ] Persist `irac_prev_state` across reboots.
- [ ] Support multiple devices.
2023-06-10 14:53:02 +02:00
63cc575c8b
Berry Webclient: Change StreamBytes to StreamBeBytesWriter, and improve wc_getbytes ( #18837 )
...
This reduces allocation to a single allocaiton, but also theroetically allows the Bytes object to grow if content-length was unset.
(cherry picked from commit 936477f5977dd1a4f899498cc7cc0baf05b34a89)
2023-06-10 11:28:31 +02:00
6aed929e17
fix #18817 http response for status with retain ( #18819 )
...
* fix http response for status with retain
* take 2
* add a failsafe when JSONlen reach zero
2023-06-09 07:59:24 +00:00
fc92dc0995
Add wcclient.get_bytes() to Berry ( #18829 )
...
(cherry picked from commit 5903b21448a3f088b12bd47a04996ff84e467a3a)
2023-06-09 08:56:05 +02:00
676165f3f6
better way to support LSBJ ( #18827 )
2023-06-08 20:39:02 +02:00
ae67c6cfa1
Add support for INMP441 MEMS microphone ( #18823 )
...
* Add INMP441 MEMS mic support
* add I2S audio defines as preview
2023-06-08 16:24:44 +02:00
5a8f13d57f
Pdm_mic ( #18807 )
...
* add I2S LSB flag
* add support for PDM microphones
2023-06-07 12:34:44 +02:00
a19079b2ec
Fix spelling. ( #18799 )
2023-06-06 10:21:12 +02:00
24233924c5
add I2S LSB flag ( #18793 )
2023-06-04 23:01:46 +02:00
844caf51f9
Fixed HASPmota event when value is non-integer ( fixes #18229 ) ( #18791 )
2023-06-04 20:06:04 +02:00
61f17221d0
Berry simplify I2S implementation ( #18778 )
2023-06-02 16:36:09 +02:00
f8df9e5f00
Berry `webclient.url_encode()` is now a static class method, no change required to existing code ( #18775 )
2023-06-02 13:29:57 +02:00
4e7475dbd4
Bump version v12.5.0.4
2023-06-02 10:25:02 +02:00
9d57a19be3
Fix interaction of `SO92`, `VirtualCT`, and `RGBWWTable` ( #18768 )
...
* remove unused variable
* Relocate SO92 implementation
This way, SO92 does not ignore SO106
* Relocate RGBWWTable implementation
This fixes a bug related to RGBWWTable and SO92.
Also, the code is tidier this way
* Cleanup: Reduce code duplication
* more consistent behaviour for SO92 and free_cw
---------
Co-authored-by: jonschz <jonschz@users.noreply.github.com>
2023-06-01 22:12:57 +02:00
b9d855ef79
Berry RS256 crypto algorithm (RSASSA-MCKS1_v1-5 with SHA256) used for JWT ( #18763 )
2023-06-01 10:02:23 +02:00
3c75bc92a2
Zigbee Berry mapping fix attributes ( #18747 )
2023-05-29 23:05:45 +02:00
3f094c9be1
Display descriptor for ST7735 128x160 display ( #18741 )
2023-05-29 18:50:03 +02:00
07b7a7ee9a
Fix initial ESP32 Energy kWh total time
2023-05-29 16:19:55 +02:00
bf2982854b
Fix #18737
2023-05-29 14:21:33 +02:00
fe570a1b26
Matter Border Router for ESP8266 (experimental) ( #18734 )
2023-05-29 10:40:24 +02:00
7b55e1aca2
Make `USE_DISPLAY_MODES1TO5` in firmware `LVGL` possible ( #18729 )
...
* Make `USE_DISPLAY_MODES1TO5` in firmware `LVGL` possible
2023-05-27 17:00:14 +02:00
d91e1e8bcc
Fix berry scheme select
2023-05-27 12:33:50 +02:00
e87714dbcd
Add TODO
2023-05-26 17:51:20 +02:00
fcf3477165
Initial support for WS2812 scheme 14
2023-05-26 17:47:57 +02:00
6fa22aae6b
adjust neopixel busy time ( #18723 )
...
* adjust neopixel busy time
* Adjust time for Berry
2023-05-25 19:21:18 +02:00
e05d75248e
Add undocumented feature
2023-05-25 17:13:31 +02:00
75f634dc71
freeze readings before deepsleep ( #18720 )
2023-05-25 12:20:30 +02:00
d0e88c9dae
Fix BusyDelay WS2812
2023-05-24 17:24:48 +02:00
fc67cca8b4
Add generic SystemWaitIfBusy() to fix WS2812 led flicker
...
Add generic SystemWaitIfBusy() to fix WS2812 led flicker
2023-05-24 16:21:59 +02:00
4be618fe7b
Fix WS2812 string distortions during analogRead()
...
Fix WS2812 string distortions during analogRead()
2023-05-24 15:09:26 +02:00
10f9c20078
Fix ESP32 SPI initialization for MFRC522
...
Fix ESP32 SPI initialization for MFRC522 (#18711 )
2023-05-23 14:34:47 +02:00
242eb3074a
fixes and enhancements ( #18718 )
...
* onewire fixes, webui radiobuttons
* fix regression
2023-05-23 11:30:59 +02:00
e969bf0e0e
optional prefix size and serial invert ( #18717 )
2023-05-23 08:46:00 +02:00
44b33281b6
Even more bling bling
2023-05-22 16:21:50 +02:00
9a88677122
More AS608 bling bling
...
More AS608 bling bling (#18163 )
2023-05-22 12:42:24 +02:00
80afc8793f
AdafruitFingerprint library from v2.0.4 to v2.1.0
...
AdafruitFingerprint library from v2.0.4 to v2.1.0 (#18163 )
2023-05-22 11:48:03 +02:00
22abc8ad99
Fix ESP32 InfluxDb initial connection delays
...
Fix ESP32 InfluxDb initial connection delays using HTTPClient (#18015 )
2023-05-21 16:21:43 +02:00
ae518424bc
Add IPv4 DNS lookup to influxdb
...
- Add IPv4 DNS lookup to influxdb (#18015 )
- Add response to influxdb send
2023-05-21 15:34:36 +02:00
a76ebaae48
Shutter continuous improvement ( #18701 )
...
* Update xdrv_27_esp32_shutter.ino
* Update xdrv_27_shutter.ino
* Update xdrv_01_9_webserver.ino
* Update xdrv_12_discovery.ino
* shutterinvert
removed slider display to driver
fix wrong invert display
* codereduction+refactor slider
removed webui slider into driver
optimized code
* update slide, fix invert shutters
- refactor sliders into driver
- fix percent calculation on iverted shutters
* fix on realpercent if inverted shutter
* fix ShutterPercentToRealPosition
fix on inverted shutter
* added shutter to bootloop reset
* bugfix integration
* bugfix
2023-05-21 12:25:11 +02:00
d5ad79985b
haas: sync shutter discovery and fix for more than 4 shutter ( #18694 )
...
* discovery: hoist shutter computation out of loop
* haas: sync shutter discovery and fix for more than 4 shutter
2023-05-20 09:06:56 +02:00
63a83c7289
Added quirks file for Tuya_ZG-204ZL ( #18693 )
2023-05-20 07:51:46 +02:00
f5d6578fb5
Fix correct JSON display of WifiPower float
2023-05-19 17:41:18 +02:00
4afcdc11d6
Simplify Berry Mute option
2023-05-19 16:30:48 +02:00
77103baa0a
Add internal support for max log level
2023-05-19 15:20:21 +02:00
043ea2986b
Berry `tasmota.wifi()` would wrongly report wifi as up ( #18687 )
...
* Berry `tasmota.wifi()` would wrongly report wifi as up
* Fix ESP8266 compile
* Fix display of IP in wifiman
* Improve wifiman IP handling for IPv6
2023-05-18 11:23:09 +02:00
2b76e8e668
HASPmota `meta` attribute and improved `berry_run` ( #18685 )
2023-05-17 21:40:05 +02:00
4a7e4f9a17
Refactor dynamic wifi tx power
2023-05-17 11:44:14 +02:00
57f85ae478
Optimize dynamic WiFi power
2023-05-17 10:45:00 +02:00
4d131fd543
zero-cross dimmer cleanup ( #18674 )
...
removed zero cross dimmer initialize
2023-05-17 08:54:22 +02:00
adff41f962
bugfix ( #18673 )
2023-05-16 22:34:07 +02:00
0385204ca7
Add command ``WifiPower 0``
...
Add command ``WifiPower 0`` to enable dynamic wifi power based on RSSI by @TD-er (#15443 )
2023-05-16 18:55:55 +02:00
f8b26a90f6
Add mutex to many camera functions. ( #18655 )
...
* Add mutex to many camera functions.
* Allow stream to continue after wcinit command (and other commands which reconfigure).
* Adust retries on camera init, specifically log success if it retried.
Shorten messages to save rom.
I have seen fail of 0x103 and 0x20002 succeed on second try.
2023-05-16 12:21:25 +02:00
81d7785f66
LED PWM ac_dimmer curve was wrongly applied instead of Gamma ( #18666 )
2023-05-15 22:51:14 +02:00
98bfc172c1
Zigbee support for air sensors ( #18665 )
...
* Zigbee support for air sensors
* ppm
2023-05-15 22:04:13 +02:00
9b8f3b6b4c
Add command I2CScan0
...
Add command I2CScan0 to scan both busses if available
2023-05-14 15:21:19 +02:00
f1a9a0b45b
Add support for PCA9557
...
Add support for PCA9557 8-bit I/O expander (#18632 )
2023-05-14 15:08:09 +02:00
26508e55fc
Merge branch 'development' of https://github.com/arendst/Tasmota into development
2023-05-14 14:42:23 +02:00
7cad4f95b6
Enable I2c on webcam
2023-05-14 14:42:11 +02:00
885737a1fd
Add support for PCA9557 8-bit IO expander ( #18632 )
...
* add PCA9557 driver
* text correction
* added switches and buttons
* update max devices to 8
* cleanup
2023-05-14 14:19:39 +02:00
f860722eba
Added Endianess Parameter ( #18650 )
...
https://github.com/arendst/Tasmota/discussions/18244
Co-authored-by: JeroenSt <nospam@nospam.org>
2023-05-14 14:18:45 +02:00
0bf27e70fe
fix logic when init cam was successful ( #18653 )
2023-05-14 14:08:53 +02:00
86979646ff
Energy power delta report delayed
...
Energy power delta report delayed by two seconds allowing hardware to stabilize (#17751 )
2023-05-11 18:10:52 +02:00
79a826a206
Update xdrv_81_esp32_webcam.ino ( #18637 )
2023-05-11 09:28:33 +02:00
3a6cd9b63c
start modus tcp bridge automatically ( #18634 )
...
* added default port for modbus tcp bridge to start automatically
* updated ifdef style
* renamed define for modbus default port
2023-05-10 14:38:52 +02:00
3c951d7751
fix GT911 crash in LVGL firmware ( #18633 )
...
* fix GT911 crash
* remove wrong frag when using GT911
2023-05-10 14:02:51 +02:00
64e844d387
Disable crashing GT911 driver ( #18631 )
2023-05-10 11:28:59 +02:00
632176765d
Added define to adjust calibration precision. ( #18613 )
...
Co-authored-by: JeroenSt <nospam@nospam.org>
2023-05-10 09:38:27 +02:00
bef49b4617
Update polish language ( #18615 )
2023-05-10 09:36:54 +02:00
6a7b2b0c6e
IR: Extended the A/C protocol with Command/iFeel/SensorTemp ( #18612 )
...
* IR: Added support for new A/C protocol fields
New fields introduced in IRremoteESP8266 v2.8.5:
1. Command (one of: [Control | Config | iFeel | Timer], default: Control) - allows to set IR command type (e.g. iFeel for no-beep ambient sensor report)
2. iFeel (boolean, default: false) - configures whether iFeel (ambient sensor temp. is used by the A/C unit)
3. SensorTemp - the ambient sensor temperature reading to send
Note:
- Fan setting via int is now 6-value (breaking change -> 6 is the new max)
* IR A/C: Model now pretty-printed to JSON
Model string is the default (falls back to int if n/a)
* IR A/C: Added separate JSON resp. per command type
* No change for "kControlCommand" (default/legacy).
* SensorReport/Timer/Config commands only contain relevant JSON nodes
Additionally:
Clock has time semantics (input: minutes, output: HH:MM), except for "config" mode,
where state.clock is used as ConfigKey and state.sleep is used as ConfigValue.
---------
Co-authored-by: Mateusz Bronk <2566147+mbronk@users.noreply.github.com>
2023-05-09 21:35:56 +02:00
be27b4c488
Update de_DE.h ( #18621 )
2023-05-09 20:12:24 +02:00
6fe1bbd617
Update changelogs
2023-05-08 15:10:15 +02:00
45eb82bc3f
Fix for not sending changes to mqtt ( #18600 )
...
Co-authored-by: JeroenSt <nospam@nospam.org>
2023-05-08 09:59:28 +02:00
6cb92ffe49
Fix for aligment at displayfloat command ( #18601 )
...
* Fix for wrong aligment at displayfloat command
* Added alignment parameter to prevent regression
---------
Co-authored-by: JeroenSt <nospam@nospam.org>
2023-05-08 09:58:26 +02:00
cdc6ba7c96
Update italian language ( #18605 )
2023-05-08 09:57:13 +02:00
cf60e34578
fix webcam init for some cases ( #18606 )
...
Co-authored-by: Christian Baars <christianbaars@MacBook-Pro-von-Christian.local>
2023-05-08 09:57:00 +02:00
da5396a080
Add filesystem size to esp8266 GUI
2023-05-07 17:25:18 +02:00
91523fd90b
Add GM861 optional heartbeat
2023-05-07 16:01:33 +02:00
eccc1af0a2
disable SHT pig on i2c / add missing GT911 defines ( #18595 )
...
* disable SHT pig on i2c / add missing GT911
* GT911 missing in config
2023-05-07 15:32:15 +02:00
a46b926530
fix i2c touch init ( #18594 )
2023-05-07 14:48:49 +02:00
0287291cd9
Add GM861 optional AIMId decode
2023-05-07 14:11:29 +02:00
e9d1e8c725
Change command FileUpload binary index
2023-05-06 18:09:11 +02:00
b9464a21a8
GM861 add support for AIM
2023-05-06 17:18:52 +02:00
25e55ae073
#18548 fix shuttersetup ( #18586 )
...
- code optimization
- shuttersetup reluctant on relay to energy measure relation
2023-05-06 15:46:29 +02:00
8b2539a35a
Partition_Manager.tapp fixed ( #18588 )
2023-05-06 12:18:12 +02:00
d7b6d72e19
Add support for GM861
...
- Add support for GM861 1D and 2D bar code reader (#18399 )
- Bump version to v12.5.0.2
2023-05-05 16:50:19 +02:00
069278f966
Berry add `tcpclientasync` class for non-blocking TCP client ( #18584 )
2023-05-05 15:13:22 +02:00
687b26ad13
Scripter update ( #18578 )
...
* add ds2480b library
* add onewire support
* reset on error
* call to get esp32 HWS
* DS2480 serial invert option
2023-05-05 09:17:17 +02:00
c26ec44407
Matter POC for remote Relay ( #18575 )
2023-05-03 23:03:01 +02:00
9097f508fd
BugFix Garage + new shutterbuttons options ( #18572 )
...
* Fix GarageMode movements
* BugFix Garage + new shutterbuttons options
- Removed logging
- shutterbuttons support incremental change
- garage mode, fix #18539 and fix #18442
2023-05-03 21:44:09 +02:00
3fa42072b1
Fix HASPmota demo for the new Berry rule engine ( #18570 )
2023-05-03 17:33:21 +02:00
c498995f79
Update xdrv_68_zerocrossDimmer.ino ( #18556 )
...
* Update xdrv_68_zerocrossDimmer.ino
* Address IRAM issue report
removed some IRAM from ESP8266. Further improvement to ESP32 as soon as measurement is available.
2023-05-02 15:53:17 +02:00
cda2bf157d
Add support for TC74
...
Add support for TC74 temperature sensor by Michael Loftis (#18042 )
2023-05-01 16:26:07 +02:00
616652ea22
Added support for Dingtian Relay Board v3.6.10 ( #18535 )
...
* Added support for Dingtian Relay Board v3.6.10
* Output OE was never initialized
* Removed white spaces trying to fix language builds
* Fix for https://github.com/arendst/Tasmota/pull/18535#pullrequestreview-1406978097
* Fixed language builds
---------
Co-authored-by: JeroenSt <nospam@nospam.org>
2023-05-01 14:51:02 +02:00
c5612a50fb
Fix for https://github.com/arendst/Tasmota/discussions/15703#discussioncomment-5713294 ( #18534 )
...
Added and fixed comments
Co-authored-by: JeroenSt <nospam@nospam.org>
2023-04-29 14:46:38 +02:00
1d0c19311d
Add support for WT32_SC01 Plus display ( #18538 )
2023-04-29 14:45:10 +02:00
17d1d7f5fa
Update xdrv_68_zerocrossDimmer.ino ( #18532 )
2023-04-28 17:33:12 +02:00
d206de52f1
Italian language update ( #18531 )
2023-04-28 08:38:46 +02:00
Paul Blacknell
paulusbrand
SteWers
Christian Baars
Jason2866
s-hadinger
Theo Arends
usr44
stefanbode
Vincent de Groot
msedv
gemu
bovirus
sfromis
btsimonh
xsp1989
MIzzzzon
Jacek Ziółkowski
Andrew Klaus
jonschz
p2122
Christian Baars
Norbert
Ian Anderson
Norbert Richter
Subhash Chandra
Barbudor
blakadder
Bernhard Urban-Forster
CCTweaker
Jeroen
f-reiling
TID
Mateusz Bronk
Tim L