Commit Graph

527 Commits

Author SHA1 Message Date
Theo Arends 54aaaf50c9 6.4.1.14 Add diag info to status 3
6.4.1.14 20190203
 * Add SetOption32 until SetOption49 diagnostic information to Status 3 report as replacement for second property value in SetOption property name
 * Add Resolution property to Status 3 report providing previous SetOption second value property
2019-02-03 12:38:41 +01:00
Colin Kuebler d7b8a6453d Added preprocessor constant for LT_SM16716 for improved code readability
Note that this differs from other LT_* in that it's not an enum
Ensure the SM16716 codepath is only taken when the top half of light_type is LT_SM16716
2019-02-01 19:41:12 -05:00
Gabor Simon bbce19a74e
Merge branch 'development' into sm16716 2019-02-01 08:27:35 +04:00
Colin Kuebler 3a43050d93 Integrated Gabor's SM16716 code into the light driver code
Removed redundant processing and variables
Added new light type to distinguish SM16716 devices
2019-01-30 17:19:40 -05:00
Theo Arends 2c164a8b4b 6.4.1.13 Add boot loop offset
6.4.1.13 20190130
 * Add command SetOption36 to control boot loop default restoration (#4645, #5063)
2019-01-30 14:34:31 +01:00
Theo Arends 304ac6fe44 6.4.1.12 code changes (byte/boolean)
6.4.1.12 20190128
 * Change code use of boolean to bool and byte to uint8_t
 * Change code uint8_t flags to bool flags
2019-01-28 14:08:33 +01:00
Theo Arends dc75b473cf Add support for inverted buttons
* Add core version conditional compile options to provided PWM files (#4917)
 * Add support for inverted buttons and inverted buttons without pullup (#4914)
2019-01-27 14:54:28 +01:00
Theo Arends 1fb7eb646f Add 50 mSec delay
Add 50 mSec delay between interlocked relay switch
2019-01-25 18:30:10 +01:00
Theo Arends 505c4794d1 6.4.1.11 Rewrite interlock
6.4.1.11 20190124
 * Remove command SetOption14 as it has been superseded by command Interlock
 * Remove command SetOption63 as it has been superseded by command Interlock
 * Add command Interlock 0 / 1 / 1,2 3,4 .. to control interlock ON/OFF and add up to 8 relays in 1 to 4 interlock groups (#5014)
2019-01-25 17:46:27 +01:00
Theo Arends 7745e1e779 Fix Hass Software Watchdog
Fix Hass Software Watchdog exception during discovery (#4988)
2019-01-22 12:46:55 +01:00
Theo Arends b5824fc361 Housekeeping 2019-01-18 10:52:18 +01:00
Theo Arends e7e378f463 Add (S)SerialSend features
* Fix mDNS addService (#4938, #4951)
 * Add (S)SerialSend3 escape sequence \x to allow hexadecimal byte value (#3560, #4947)
 * Add SerialBridge command SSerialSend5 <hexdata>
2019-01-17 17:48:34 +01:00
Theo Arends e5fd45c9c8 6.4.1.9 Fix mDNS addService
6.4.1.9 20190115
 * Add support for Mi LED Desk Lamp with rotary switch (#4887)
 * Fix mDNS addService (#4938)
2019-01-15 16:11:42 +01:00
dh.harald 2aac0683be Add support for Mi Desk Lamp 2019-01-14 22:53:15 +00:00
lobocobra 15e4918238 As requested in issue 824# by ascillato2, implement split interlock.
=> Split interlock of SONOFF with more than 2 channel into 2 groups
=> This is needed for shutter and similar utilization
2019-01-13 11:00:02 +01:00
Theo Arends 23fa3c624a Clarify Link/Power LED selection
Clarify Link/Power LED selection
2019-01-08 11:44:45 +01:00
Theo Arends 148fe4aec0 Only restart if module supports it 2019-01-07 16:58:44 +01:00
Theo Arends a23f01080b 6.4.1.8 Add template flags
6.4.1.8 20190107
 * Change sonoff_template.h layout regarding optional module flags like ADC0
 * Add command SetOption62 1 to force no Button/Switch pullup on dedicated modules. Currently only supported on Shelly2 (#4841)
2019-01-07 16:33:18 +01:00
Theo Arends 95f39be2ef Change button driver making it modular
Change button driver making it modular
2019-01-07 12:38:47 +01:00
Theo Arends 3d31dd1457 Disable Button/Switch 4 seconds
Disable both Buttons and Switches 4 seconds after power on to workaround Wemos and Obi startup issues.
2019-01-07 10:15:00 +01:00
Theo Arends e1d903eab3 Add no pull-up control to Shelly 2
Add no pull-up control to Shelly 2 module (default is pull-up, change GPIO2 to Switch3n for no pull-up) (#4841)
2019-01-06 18:50:56 +01:00
Theo Arends 0195cabbd6 Add relay status functionality to LED2
Add relay status functionality to LED2 when configured leaving LED1 for (wifi/mqtt) status indication
2019-01-06 18:02:21 +01:00
Theo Arends 67cf1dbbcf 6.4.1.5 Add mDns user control
6.4.1.5 20190103
 * Remove command SetOption35 0-255 for mDNS start-up delay (#4793)
 * Add command SetOption55 0/1 to disable/enable mDNS (#4793)
2019-01-03 17:30:54 +01:00
Theo Arends 447ec6256e 6.4.1.4 Update Copyright (C) 2019
6.4.1.4 20190101
 * Update Copyright (C) 2019
2019-01-01 13:55:01 +01:00
Theo Arends 7ebb7a6067 6.4.1.3 Change sonoff_template.h
6.4.1.3 20181229
 * Change sonoff_template.h module lay-out by removing non-configurable GPIOs
2018-12-29 19:46:28 +01:00
Theo Arends afe83a3460 Prep for template tuning 2018-12-29 17:19:13 +01:00
Theo Arends 5a44b12870 6.4.1.2 Rewrite Switch driver
6.4.1.2 20181228
 * Change switch driver making it modular and introduce input filter (#4665, #4724)
 * Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (#4738)
 * Add variable %timestamp% to rules (#4749)
2018-12-28 16:35:19 +01:00
Theo Arends 9640931345 Change switch debounce
Change switch input detection by optimizing switch debounce (#4724)
2018-12-26 14:21:00 +01:00
Theo Arends 0b10f48e41 6.4.1.1 Fix most compiler warnings
6.4.1.1 20181224
 * Fix most compiler warnings
2018-12-24 18:14:25 +01:00
Theo Arends 77c07a2e00 Change FallbackTopic
Change FallbackTopic from cmnd/<mqttclient>/ to cmnd/<mqttclient>_fb/ to discriminate from Topic (#1528)
2018-12-23 14:48:57 +01:00
Theo Arends e2cd656286 6.4.0.3 Hass and Alexa fixes
6.4.0.3 20181222
 * Change Hass discovery to short MQTT messages as used by Hass 0.81 and up (#4711)
 * Change FallbackTopic detection (#4706)
 * Add define WIFI_SOFT_AP_CHANNEL in my_user_config.h to set Soft Access Point Channel number between 1 and 13 as used by Wifi Manager web GUI (#4673)
 * Fix Alexa "this value is outside the range of the device". Needs power cycle and Alexa deletion/discovery cycle. (#3159, #4712)
2018-12-22 16:13:07 +01:00
Adrian Scillato dcbf5a8c94
Fix ArduinoOTA for Core 2.5.0 (fix is backwards compatible)
https://github.com/arendst/Sonoff-Tasmota/issues/4619
2018-12-13 23:04:48 +00:00
Theo Arends 67ec0678a3 6.3.0.17 Add features
6.3.0.17 20181211
 * Add support for TheoV2 sensors as documented on https://sidweb.nl
 * Add support for SDM220 (#3610)
 * Enhance support for MPU6050 using DMP (#4581)
2018-12-11 14:24:52 +01:00
Erik a65041fee5 Enabled forced local operation when button- or switchtopic is set 2018-12-08 08:44:59 +01:00
Theo Arends 9a3c3895fb Fix Domoticz Fanspeed
Fix Domoticz Fanspeed
2018-12-06 15:03:42 +01:00
Theo Arends 61aa428646 6.3.0.16 - Bump version
6.3.0.16 20181201
 * Add support for iFan02 Fanspeed in Domoticz using a selector (#4517)
 * Add Announce Switches to MQTT Discovery (#4531)
2018-12-06 11:17:25 +01:00
Theo Arends 9471163d86
Merge pull request #4531 from emontnemery/hass_announce_switch
MQTT Discovery - Announce switches
2018-12-06 11:02:40 +01:00
Theo Arends e64c8d61c9
Update sonoff.ino 2018-12-06 11:01:57 +01:00
Theo Arends dfa0d2ef11 Add Domoticz Selector for Fanspeed
Add support for iFan02 Fanspeed in Domoticz using a selector (#4517)
2018-12-06 10:49:49 +01:00
Theo Arends 4b287ab4cb Final fix compile error (#4509)
Final fix soft_spi_flg compile error (#4509)
2018-12-05 12:23:42 +01:00
Erik be19af15e2 Announce switches 2018-12-04 21:32:02 +01:00
andrethomas2 a2e865bb44
Add dummy soft_spi_flg to satisfy compiler
@arendst Just adding this, for now, to satisfy the compiler until you get time to merge the rest of the Software SPI support.
2018-12-02 18:53:49 +02:00
Erik 74172f14d3 Further improve Hass auto discovery 2018-12-02 16:39:59 +01:00
Theo Arends eb3c1a327d 6.3.0.15 Update dynamic sleep
6.3.0.15 20181201
 * Removed command SetOption36 (#4497)
 * Add command SetOption60 0/1 to select dynamic sleep (0) or sleep (1) (#4497)
2018-12-01 18:53:42 +01:00
andrethomas 6050cd40f3 Merge sleep command 2018-12-01 18:47:25 +02:00
andrethomas 5f402c8f34 Fix sleep->SetOption36 transition 2018-12-01 00:18:08 +02:00
andrethomas 3613946f18
Prevent sleep and SetOption36 being used concurrently
Prevent sleep and SetOption36 being used concurrently
2018-11-30 20:00:20 +02:00
Theo Arends eb851a9a90
Merge pull request #4450 from emontnemery/hass_send_tele
WIP - Support sending tele/STATUS as state/RESULT
2018-11-26 12:49:43 +01:00
andrethomas acdbd39124
Fix math in LoadAvg
Fix the math in LoadAvg calculation. To keep average we take away one Nth of loops and add one Nth of current cycle ration to the average.

Now the math makes more sense... maximum load average on setoption36 0/1 = 999 (as it should be)
2018-11-26 11:37:15 +02:00
Erik eda60b6124 Support sending tele/STATUS as state/RESULT 2018-11-25 21:27:19 +01:00
Theo Arends 243ec16d80 Fix another calcuation error
Fix another calcuation error
2018-11-25 17:31:53 +01:00
andrethomas 0b14a95082
Remove assumption of 100% to report correctly
Remove the assumption of 100% loop duty cycle as we want an accurate loop load average and not a percentage as such - so if it overshoots the value stored for setoption36 this should be known by looking at the load average and not be distorted by reducing it to 100 basis points on the assumption that my_acitivity took as long as setoption36.
2018-11-25 17:52:07 +02:00
Theo Arends 05be1ee21c Fix exception due to divide by 0
Fix exception due to divide by 0
2018-11-25 16:41:29 +01:00
andrethomas 7c84f892fc Add target loop delay to telemetry 2018-11-25 14:29:53 +02:00
andrethomas c22fcc2a3a
Update CPU average load function
Remove unnecessary manipulations :)
2018-11-24 19:00:42 +02:00
Theo Arends 52eeef95f0 Add CPU average load
Add CPU average load to state message (#4431)
2018-11-24 17:43:18 +01:00
Theo Arends 4700e49d70
Update sonoff.ino 2018-11-24 17:16:27 +01:00
andrethomas 0e56044eb5
Add main loop load average
Add main loop avarage duty cycle measured against setoption36 value to telemetry data as LoadAvg
2018-11-24 18:12:49 +02:00
andrethomas c436ed5d3d
Update boot delay code
Since the driver boot delay has been removed, this is a better strategy for getting a smoother boot cpu cycle vs loop delay.
2018-11-22 17:13:55 +02:00
Theo Arends d71ae77900 6.3.0.12 Change boot delays
6.3.0.12 20181122
 * Remove delays introduced in 6.3.0.11 (#4233)
 * Add additional start-up delay during initial wifi connection
 * Add support for I2C MGC3130 Electric Field Effect sensor by Christian Baars (#3774, #4404)
 * Add initial support for Hass sensor discovery (#4380)
2018-11-22 12:25:18 +01:00
Theo Arends 23c16e58a9 Housekeeping
Housekeeping
2018-11-20 15:00:24 +01:00
Theo Arends e34a1f0719 Add wifi network scan
* Add command SetOption56 0/1 to enable wifi network scan and select highest RSSI (#3173)
2018-11-19 18:07:25 +01:00
Theo Arends 4899178362 6.3.0.10 Add command SetOption36
6.3.0.10 20181118
 * Add command SetOption36 0..255 milliseconds (10 default) to tune main loop dynamic delay
2018-11-18 16:49:02 +01:00
Theo Arends 18997e841f 6.3.0.9 Add dynamic delay in loop
6.3.0.9 20181118
 * Moved command SetSensorXX to debugging driver freeing user code space
 * Add dynamic delay to main loop providing time for wifi background tasks
 * Remove delays introduced in 6.3.0.1 (#4233)
2018-11-18 15:02:52 +01:00
Theo Arends 9eacabc4f0 Delay initial flash write
* Stop enforcing flashmode dout but it is still mandatory
 * Moved bootcount update (being first) flash write to 10 seconds after restart
2018-11-16 09:36:41 +01:00
Theo Arends 877771c90a 6.3.0.8 Stop enforcing dout
6.3.0.8 20181115
 * Stop enforcing flashmode dout. Still mandatory but this a chk for possible future flash corruption
2018-11-15 14:55:45 +01:00
andrethomas 4a7e7b0dbb Change C functions with () to (void) 2018-11-14 15:32:09 +02:00
Theo Arends 3ef78e8095 Revert "Moved command SetSensorXX"
This reverts commit 830319bc6e.
2018-11-12 15:54:18 +01:00
Theo Arends 830319bc6e Moved command SetSensorXX
Moved command SetSensorXX to debugging
2018-11-12 15:09:09 +01:00
Theo Arends e2dd11b0bc Consolidate LTrim into Trim
Consolidate LTrim into Trim
2018-11-12 12:33:49 +01:00
Theo Arends 7a235cc8ef Fix shelly2 ghost switching
Fix shelly2 ghost switching caused by lack of pull-up inputs (#4255)
2018-11-10 10:48:28 +01:00
Theo Arends 3332ab01a1 Revert "Add RF calibration on next restart"
This reverts commit 2a4d82f4b6.
2018-11-08 16:33:34 +01:00
Theo Arends 2a4d82f4b6 Add RF calibration on next restart
Add RF calibration on next restart
2018-11-08 14:21:45 +01:00
Theo Arends f9bddb6c54 Add flashchipid info
Add flashchipid info
2018-11-08 10:40:19 +01:00
Theo Arends 61985ca16b Add hex to flash info 2018-11-07 18:43:44 +01:00
Theo Arends c75ae78d88 6.3.0.5 Add code image
6.3.0.5 20181107
 * Add code image and optional commit number to version
2018-11-07 15:03:41 +01:00
Theo Arends 15148f290d 6.3.0.4 Add SetSensorXX
6.3.0.4 20181106
 * Add command SetSensorXX 0/1 to disable/re-enable compiled xsns_XX_sensor.ino driver
2018-11-06 17:33:51 +01:00
Theo Arends 28c1eed302 Fix baudrate when module changed
Fix baudrate when module changed
2018-11-06 11:48:04 +01:00
Theo Arends c9cf375c6c Add checks for GPIO selections
Add more strict checks for GPIO selections
2018-11-05 17:27:02 +01:00
Theo Arends 99ae0c9cab Change wifi connection check
Change wifi connection check
2018-11-04 18:00:07 +01:00
Theo Arends 14a7424e9b Add command SetOption24
Add command SetOption24 0/1 to select pressure unit as hPa or mmHg (#4241)
2018-11-04 16:55:12 +01:00
Theo Arends 46a0a0afba Add minutes to commands Timezone
Add minutes to commands Timezone to allow all possible world timezones
2018-11-01 13:00:05 +01:00
Joel Stein faab6f1221 tuya: modify WifiState() in support.ino to reflect not-connected-state instead of reimplementing it 2018-10-30 15:34:31 +01:00
Theo Arends 6b86c473d9 Add token %hostname%
Add token %hostname% to command FullTopic (#3018)
2018-10-29 12:38:44 +01:00
Theo Arends 5c78561b07 6.2.1.20 Add mDNS delay option
6.2.1.20 20181028
 * Add command SetOption35 0..255 (seconds) to delay mDNS initialization to control possible Wifi connect problems
2018-10-28 17:57:25 +01:00
Theo Arends 2c02532e1c 6.2.1.19 Rename user_config.h
6.2.1.19 20181023
* Fix header file execution order by renaming user_config.h to my_user_config.h
* Fix Arduino IDE compilation warning regarding e-paper library
2018-10-23 15:51:51 +02:00
Theo Arends 613ffde5c0 6.2.1.18 Add API.md
6.2.1.18 20181019
 * Add more API callbacks and document API.md
2018-10-19 12:53:22 +02:00
Joel Stein cfdec25bcb Add reset-button-handler vor tuya-dimmer 2018-10-18 16:02:40 +02:00
Theo Arends d1c807998f Rewrite Tuya Dimmer code
Rewrite Tuya Dimmer code
2018-10-18 13:01:31 +02:00
Theo Arends d47ab92862 Fixxes and Add Tuya Dimmer
* Fix RfRaw and SerialSend5 regression from 6.2.1.15 (#4072)
 * Fix Sonoff Bridge RfRaw receive (#4080)
 * Add support for Tuya Dimmer (#469, #4075)
2018-10-16 11:21:44 +02:00
Theo Arends cd9987111e
Merge pull request #4075 from digiblur/development
Initial Tuya Dimmer Support
2018-10-16 09:46:16 +02:00
Adrian Scillato adf3ed56bf
Fix Bug for OTA URL if using core STAGE (2.5.0) 2018-10-15 23:27:43 -03:00
digiblur 5894cd97fc Initial TuyaDimmer Support 2018-10-15 18:32:14 -05:00
Theo Arends 6b660026cd Add cmnds Reset 4 and Reset 5
Add commands Reset 4 (reset to defaults but keep wifi params) and Reset 5 (as reset 4 and also erase flash) (#4061)
2018-10-15 14:43:47 +02:00
andrethomas 5f9867a22f Add command Reset 5 2018-10-15 00:10:02 +02:00
andrethomas f109c36bbd Add Reset 4 command to reset defaults but keep wifi config 2018-10-14 20:00:41 +02:00
Theo Arends c46ae74067 Add whitespace removal
Add whitespace removal from RfRaw and SerialSend5 (#4020)
2018-10-14 12:53:11 +02:00
Adrian Scillato a33030b622
Fixed Compiler Warning for Core STAGE SDK 3.0.0 2018-10-11 10:54:34 -03:00
Theo Arends ba16e00e36 Add command WebRefresh
Add command WebRefresh 1000..10000 to control web page refresh in milliseconds. Default is 2345
2018-10-08 14:39:36 +02:00
Adrian Scillato efb328de09
Add PWM Freq Limits Config at Compile time 2018-10-07 14:27:09 -03:00
Theo Arends 5bbec2617f 6.2.1.12 - Fixes Shelly1 and CSL
6.2.1.12 20181007
 * Fix Shelly1 switchmode 3 and 4 when using pushbutton (#3989)
 * Add support for CSL Aplic WDP 303075 Power Socket with Energy Monitoring (#3991, #3996)
2018-10-07 12:37:03 +02:00
Theo Arends 191df17b13 Add support for EXS Relay V5.0
Add support for EXS Relay V5.0 (#3810)
2018-09-30 16:52:25 +02:00
Theo Arends 6939d6eead Fix Shelly Ghost and Rule sensors
* Change pinmode for no-pullup defined switches to pullup when configured as switchmode PUSHBUTTON (=3 and up) (#3896)
 * Add delay after restart before processing rule sensor data (#3811)
2018-09-26 11:56:58 +02:00
Theo Arends bac33345a0 6.2.1.8 Extent status JSON
6.2.1.8 20180926
 * Change status JSON message providing more switch and retain information
2018-09-26 10:13:44 +02:00
Theo Arends 2029440fae 6.2.1.7 Fix NTPserver change
6.2.1.7 20180925
 * Remove restart after ntpserver change and force NTP re-sync (#3890)
 * Release full Shelly2 support
2018-09-25 11:35:37 +02:00
Adrian Scillato ecd3175257
Prevent Command NtpServer to restart Tasmota
#3890
2018-09-24 16:16:14 -03:00
Theo Arends f65d8c0cbf Fix possible array overflow
Fix possible array overflow (#3887 )
2018-09-24 11:44:40 +02:00
Theo Arends 01ce1b0c91 Fix Shelly2 monitoring
Disable serial logging on Shelly2 as serial is being used by energy monitoring (#3878)
2018-09-23 13:55:42 +02:00
Theo Arends f05fc71d67 Fix rule trigger POWER1#STATE
Fix rule trigger POWER1#STATE execution after restart and SetOption0 is 0 (#3856)
2018-09-22 17:37:49 +02:00
Theo Arends 557545cb56 Cleanup Driver
Cleanup Driver
2018-09-21 16:19:31 +02:00
andrethomas 846d7a911f Add driverXX support for FUNC_COMMAND callback 2018-09-20 22:56:07 +02:00
Theo Arends bf7dcb8eec 6.2.1.3 Add SerialSend5
6.2.1.4 20180916
 * Add command SerialSend5 to send raw serial data like "A5074100545293"
 * Update MCP230xx driver
 * Update Czech translation
 * Update MP3 driver (#3800)
 * Add userid/password option to decode-status.py (#3796)
 * Fix syslog when emulation is selected (#2109, #3784)
 * Fix Pzem2 compilation error (#3766, #3767)
2018-09-16 16:09:00 +02:00
Adrian Scillato 8025f28409
Let syslog to be active when emulation is active too
solves issue https://github.com/arendst/Sonoff-Tasmota/issues/2109
2018-09-12 19:00:35 -03:00
Theo Arends 4c41ea4461 Houskeeping 2018-09-09 14:31:40 +02:00
Theo Arends 7cd9224819 6.2.1.3 - Change drop down list
6.2.1.3 20180907
 * Change web Configure Module GPIO drop down list order for better readability
 * Fix showing Period Power in energy threshold messages
 * Fix ButtonRetain to not use default topic for clearing retain messages (#3737)
2018-09-08 17:18:31 +02:00
Theo Arends f517755303 Prep for frequency display
Prep for energy frequency display and update xnrg_05_pzem2.ino with correct register values
2018-09-07 18:15:47 +02:00
Theo Arends 3ccf83d1a6
Merge pull request #3711 from rgitzel/append-timezone
optionally append timezone to timestamp in JSON messages
2018-09-06 11:38:54 +02:00
Theo Arends 359877489d 6.2.1.2 - Fix KNX PA exception
6.2.1.2 20180906
 * Fix KNX PA exception. Regression from 6.2.1 buffer overflow (#3700, #3710)
2018-09-06 10:42:22 +02:00
Rodney Gitzel 9413ba9f47 optionally append timezone to timestamp in JSON messages 2018-09-05 14:51:12 -07:00
Theo Arends 35d0e502c4 Some additions
* Add command Display to show all settings at once
 * Add toggle function RGBW lights (#3695, #3697)
 * Add user configurable GPIO02 and GPIO03 on H801 devices (#3692)
2018-09-05 18:01:15 +02:00
Theo Arends ed1fd55d7f
Merge pull request #3692 from MadDoct/patch-3
Make tx and rx pins user selectable on the H801
2018-09-05 16:02:37 +02:00
Theo Arends 36242e0e02 Add network information
Add network information to display start screen (#3704)
2018-09-05 15:38:48 +02:00
MadDoct e7ae727c65
Update sonoff.ino 2018-09-04 18:53:44 +01:00
Theo Arends 07dafe1631 6.2.0.2 - Energy monitoring
6.2.0.2 20180904
 * Rewrite energy monitoring using energy sensor driver modules
 * Fix lost today and total energy value after power cycle (#3689)
2018-09-04 16:22:34 +02:00
MadDoct ababc351d7
prepare to allow h801 tx and rx pins to be gpio_user 2018-09-04 09:45:26 +01:00
Theo Arends 2210bda2e6 Replace APMac with BSSId
Replace APMac with BSSId in state and status 11
2018-09-02 15:54:26 +02:00
Theo Arends 5623924813 Add Wifi channel number
Add Wifi channel number to state message (#3664)
2018-09-02 12:10:22 +02:00
Theo Arends c6a14c5fe7 Fix possible exception
Fix possible exception due to buffer overflow (#3659)
2018-09-02 11:52:24 +02:00
Theo Arends 2212af4860 Clear GPIO on multi boot loop
Clear GPIO on multi boot loop
2018-08-30 14:47:48 +02:00
Theo Arends f7c38f24f3 6.1.1.14 Add boot loop detection
Add boot loop detection and try to fix
2018-08-30 14:27:33 +02:00
Theo Arends 3abdaaffb7 Revert "6.1.1.14 Add boot loop detection"
This reverts commit b9a875d6fb.
2018-08-30 13:19:09 +02:00
Theo Arends b9a875d6fb 6.1.1.14 Add boot loop detection
Add boot loop detection and try to fix
2018-08-30 12:22:24 +02:00
Theo Arends 55b43734d8 6.1.1.13 - Fixes
6.1.1.13 20180828
 * Fix 6.1.1.12 regression of Mem and Var default handling (#3618)
 * Optimizations
2018-08-28 11:10:32 +02:00
Theo Arends f8666c0410 Some requested additions
* Add optional MQTT_TELE_RETAIN to Energy Margins message (#3612, 3614)
 * Add Individual HSBColorX commands (#3430, #3615)
 * Add RuleX debug options 8,9,10 (StopOnError) to control RuleX execution status after an exception restart (#3607)
2018-08-28 10:26:33 +02:00
Theo Arends 9b54ab9038 Some optimizations
Some optimizations
2018-08-27 16:07:23 +02:00
Theo Arends d4931f7b11 Fix handling default names Pt.2
Fix handling default names Pt.2
2018-08-27 14:53:09 +02:00
Theo Arends 9978381c94 Fix handling deafult names
Fix handling use of default names when using names starting with shortcut character (#3392, #3600)
2018-08-27 13:06:22 +02:00
Theo Arends d69e88b50b 6.1.1.12 - Add debounce time
6.1.1.12 20180827
 * Add commands ButtonDebounce 40..1000 and SwitchDebounce 40..1000 to have more control over debounce timing. Default is 50mS (#3594)
2018-08-27 12:01:20 +02:00
Theo Arends ea43540b43 Update WS2812 driver
Update WS2812 driver for new state time
2018-08-26 17:32:49 +02:00
Theo Arends bbd2529914 Sleep fixes part 2 and 3 of 3
* Change scheduler phase 2/3 - Fixed when sleep is enabled: Blinktime (#3581)
 * Change scheduler phase 3/3 - Some sensor update timings: AdcEvery 200 -> 250, Senseair 300 -> 250, SDM120 300 -> 250, SDM630 300 -> 250
2018-08-26 17:10:18 +02:00
Theo Arends f090050e69 6.1.1.11 - Sleep fixes part 1
6.1.1.11 20180826
 * Change scheduler phase 1 - Fixed when sleep is enabled: Uptime, Delay, PulseTime and TelePeriod (#3581)
2018-08-26 15:42:35 +02:00
Theo Arends 4defda2f1a Rewrite some GPIO options
Rewrite GPIO options ButtonXn, SwitchXn and CounterXn to select INPUT mode instead of INPUT_PULLUP
2018-08-25 13:08:06 +02:00
Theo Arends ae6fcd4d60 Change sleep command
Change command sleep from restart after change to not restart after change (#3554)
2018-08-24 16:38:55 +02:00
Theo Arends ef842daa32 Fix test
Fix test
2018-08-23 17:47:45 +02:00
Theo Arends 6a5c0d29e8 6.1.1.9 - Fixes and Additions
6.1.1.9
 * Allow user override of define MAX_RULE_TIMERS (#3561)
 * Allow user override of define MAX_RULE_VARS
 * Add GPIO options ButtonXn, SwitchXn and CounterXn to select INPUT mode instead of INPUT_PULLUP (#2525)
 * Fix OtaMagic when file path contains a dash (-) (#3563)
2018-08-23 16:05:51 +02:00
Norbert Richter 52413f103e Fixed OtaMagic handling having minus "-" within OtaUrl 2018-08-23 14:31:50 +02:00
Theo Arends 6d98864a04 Fix iFan02 power on state
Fix iFan02 power on state (#3412, #3530)
2018-08-20 15:51:46 +02:00
Theo Arends bb87f99ee0 Fix version numbering
Fix version numbering
2018-08-17 11:10:21 +02:00
Theo Arends 3efb84fb93 Change version representation
Change version representation from 1.1.1a to 1.1.1.1 for better change reference
2018-08-12 14:05:15 +02:00
Theo Arends 9147635d5c Add ifan02 Fanspeed +/-
Add ifan02 Fanspeed +/- as command option to increase or decrease fenspeed (#3415)
2018-08-11 16:12:10 +02:00