Theo Arends
|
9073fe01c1
|
Add ESP32 support for BMPxxx sensors on two I2C busses
Add ESP32 support for BMPxxx sensors on two I2C busses (#17643)
|
2023-01-08 17:19:08 +01:00 |
Theo Arends
|
2e7496a052
|
Keep webserver enabled on command ``upload``
|
2023-01-07 15:37:52 +01:00 |
Theo Arends
|
0b2a375dee
|
Update changelogs
|
2023-01-06 16:04:04 +01:00 |
s-hadinger
|
33d6dbed3d
|
No IP address shown when in AP moode (#17599) (#17619)
|
2023-01-06 14:03:16 +01:00 |
Theo Arends
|
8275cb776e
|
Fix rule mqtt subscribe payload size
Increase rule event buffer from 100 to 256 characters (#16943)
|
2023-01-05 15:02:55 +01:00 |
s-hadinger
|
d59caa7203
|
Berry ``crypto.AES_CCM`` (required by Matter protocol) (#17586)
|
2023-01-03 20:26:46 +01:00 |
s-hadinger
|
f570dcc913
|
Berry `bytes()` now evaluates to `false` if empty (#17585)
|
2023-01-03 19:43:41 +01:00 |
Theo Arends
|
ea6a5a2d4e
|
Removed delays in TasmotaSerial and TasmotaModbus Tx enable switching
|
2023-01-02 15:08:40 +01:00 |
Theo Arends
|
e375448090
|
Update change logs
|
2023-01-02 12:31:46 +01:00 |
Theo Arends
|
14ee8decf7
|
Update changelogs
Add support for PCA9632 4-channel 8-bit PWM driver as light driver by Pascal Heinrich (#17557)
|
2023-01-01 14:29:41 +01:00 |
Theo Arends
|
c63919d783
|
Change Energy totals max supported value
- Change Energy totals max supported value from +/-21474.83647 to +/-2147483.647 kWh
- Bump version to v12.3.1.3
|
2023-01-01 11:32:30 +01:00 |
Theo Arends
|
20a50ffc2e
|
Revert Tuya rewrite
- Update changelogs
|
2022-12-31 16:08:59 +01:00 |
Theo Arends
|
4ee6aee35e
|
Fix ESP8266 relay power on spikes
Fix ESP8266 set GPIO's to input on power on fixing relay spikes (#17531)
|
2022-12-29 14:46:34 +01:00 |
Theo Arends
|
2e1f8fd756
|
Update changelogs
Change ESP32 Framework (Core) from v2.0.5.4 to v2.0.6 (IPv6 support)
|
2022-12-28 14:31:49 +01:00 |
Theo Arends
|
2fd63ff01f
|
Fix Modbus transmit enable GPIO
Fix Modbus transmit enable GPIO enabled once during write buffer
|
2022-12-28 14:07:30 +01:00 |
s-hadinger
|
ef4138bdaa
|
Support for IPv6 only networks on Ethernet (not yet Wifi) (#17527)
|
2022-12-27 21:59:34 +01:00 |
s-hadinger
|
790b6feae6
|
Change NTP default servers to dual-stack (IPv4/IPv6) (#17525)
|
2022-12-27 20:59:56 +01:00 |
s-hadinger
|
1832c4b2f0
|
Berry crypto add ``SPAKE2P_Matter`` for Matter support (#17497)
|
2022-12-23 19:40:12 +01:00 |
Theo Arends
|
234d6e20e0
|
Extent Generic Energy Modbus Driver
- Add support for up to 3 single phase modbus energy monitoring device using generic Energy Modbus driver
|
2022-12-23 16:56:18 +01:00 |
s-hadinger
|
42e3862970
|
Berry hkdf (#17487)
* Berry crypto add `HKDF_HMAC_SHA256`
* add HKDF option
|
2022-12-22 22:39:06 +01:00 |
s-hadinger
|
970e36f44d
|
Berry crypto add ``random`` to generate series of random bytes (#17482)
|
2022-12-22 18:57:20 +01:00 |
Theo Arends
|
23e0bc27e7
|
Update changelogs
|
2022-12-22 17:54:54 +01:00 |
s-hadinger
|
f06c07996c
|
Berry crypto add ``EC_P256`` and ``PBKDF2_HMAC_SHA256`` algorithms required by Matter protocol (#17473)
|
2022-12-22 10:09:13 +01:00 |
Theo Arends
|
8ffff8b857
|
Change Tasmota OTA scripts
Change Tasmota OTA scripts now support both unzipped and gzipped file uploads (#17378)
|
2022-12-21 17:22:54 +01:00 |
Theo Arends
|
3555d88bee
|
Bump version v12.3.1.2
- Fix shutter default motorstop set to 0 (#17403)
|
2022-12-21 15:20:33 +01:00 |
s-hadinger
|
d670f476ba
|
Berry add crypto AES_CTR, HDMAC_SHA256, MD5 (#17451)
|
2022-12-19 22:30:54 +01:00 |
Theo Arends
|
b33d2d540f
|
Update changelogs
|
2022-12-18 14:18:14 +01:00 |
Theo Arends
|
a6602249a3
|
Update changelogs
|
2022-12-18 14:05:31 +01:00 |
s-hadinger
|
30ace5a3f3
|
Berry support for `crypto.SHA256` (#17430)
|
2022-12-17 23:38:57 +01:00 |
Jason2866
|
509ce597a0
|
ESP32 Core 2.0.5.4
|
2022-12-17 16:28:16 +01:00 |
s-hadinger
|
9abe7b1af9
|
Support for IPv6 DNS records (AAAA) and IPv6 ``Ping`` for ESP32 and ESP8266 (#17417)
|
2022-12-17 10:08:35 +01:00 |
Theo Arends
|
4e5c1f7a2d
|
Bump version to v12.3.1.1
|
2022-12-16 10:20:51 +01:00 |
s-hadinger
|
f8b56e1058
|
Zigbee fix crash on ESP8266 #17397 (#17405)
|
2022-12-15 22:52:19 +01:00 |
Theo Arends
|
571502114c
|
Bump version v12.3.0.1
|
2022-12-14 14:46:08 +01:00 |
Theo Arends
|
1ad8b7713e
|
Add support for ME007-ULS
Add support for ME007-ULS narrow FoV ultrasonic distance sensor by Mathias Buder (#17376)
|
2022-12-14 12:18:49 +01:00 |
Theo Arends
|
f6d385250e
|
Update changelogs
|
2022-12-14 11:31:25 +01:00 |
Theo Arends
|
ce4197459f
|
Update changelogs
|
2022-12-14 11:25:12 +01:00 |
s-hadinger
|
ce0a0d05a9
|
MQTT now uses Tasmota's DNS resolver instead of LWIP (#17387)
|
2022-12-13 21:46:20 +01:00 |
s-hadinger
|
7e27945e5a
|
ESP32 fix ``Ping`` (#17373)
|
2022-12-12 23:07:14 +01:00 |
Theo Arends
|
630987302a
|
Fix Analog MQ exception
Fix Analog MQ exception (#17271)
|
2022-12-12 10:57:21 +01:00 |
Theo Arends
|
d8d45078fb
|
Update changelogs
|
2022-12-11 12:23:01 +01:00 |
Theo Arends
|
e018b61a9d
|
Update changelogs
|
2022-12-10 17:16:42 +01:00 |
Stephan Hadinger
|
2f1b2ec5fd
|
IPv6 support for Ethernet (ESP32)
|
2022-12-08 19:06:51 +01:00 |
Stephan Hadinger
|
ec17440662
|
Berry crypto module, with AES_GCM by default and EC_CC25519 optional
|
2022-12-04 19:20:11 +01:00 |
Theo Arends
|
e1221b924d
|
Changed removed leading spaces on commands ``(S)SerialSend1 to 6``
Removed leading spaces on commands ``(S)SerialSend1 to 6`` but keep on duplicate commands ``(S)SerialSend11 to 16`` (#16723)
|
2022-12-04 15:09:39 +01:00 |
Theo Arends
|
bbde894628
|
Add serial Modbus transmit enable GPIOs
Add serial Modbus transmit enable GPIOs to all modbus energy drivers and modbus bridge (#17247)
|
2022-12-03 12:33:42 +01:00 |
Stephan Hadinger
|
d3be3dfe8f
|
IPv6 preview for ESP32, also working for ESP8266
|
2022-11-30 19:40:58 +01:00 |
Theo Arends
|
af9f83e7e4
|
Bump version v12.2.0.6
|
2022-11-29 11:11:39 +01:00 |
Stephan Hadinger
|
a0ed383840
|
Berry add module `mdns`
|
2022-11-27 18:08:53 +01:00 |
Theo Arends
|
53563d44d8
|
Add support for HLK-LD2410 24GHz smart wave motion sensor
Add support for HLK-LD2410 24GHz smart wave motion sensor
|
2022-11-26 17:49:25 +01:00 |
Theo Arends
|
a381da3a39
|
Revert GUI file accept
|
2022-11-24 14:47:26 +01:00 |
Theo Arends
|
6e9394984d
|
Update changelogs
|
2022-11-20 15:52:40 +01:00 |
Theo Arends
|
f9138984bf
|
Add accept filename extensions to GUI
Add accept filename extensions to GUI file upload input fields (#16875)
|
2022-11-20 15:07:38 +01:00 |
Theo Arends
|
4f31e7a1b2
|
Add command ``SetOption35 0..255``
Add command ``SetOption35 0..255`` to skip number of received messages in Serial Bridge (default 0) (#17140)
|
2022-11-20 12:52:24 +01:00 |
Theo Arends
|
783631903d
|
Add user control over Serial Bridge buffers
- Add optional define ``SERIAL_BRIDGE_BUFFER_SIZE`` to set Serial Bridge internal buffer size (Default ESP8266 = 256, ESP32 = 800)
- Add command ``SSerialBuffer 256..SERIAL_BRIDGE_BUFFER_SIZE`` to change serial bridge rx buffer size (#17120)
|
2022-11-18 16:21:54 +01:00 |
Theo Arends
|
0674f9b0b6
|
Add command ``SSerialBuffer 64..256``
Add command ``SSerialBuffer 64..256`` to change software serial bridge receive buffer size from default (64) to max local buffer size (256) (#17120)
|
2022-11-18 13:00:59 +01:00 |
Theo Arends
|
e578171a16
|
Update changelogs
|
2022-11-17 12:47:09 +01:00 |
Theo Arends
|
d4bfd88256
|
Merge pull request #17112 from curzon01/DS18x20_ESP32_parasite_power
Add DS18x20 parasitic power usage on ESP32
|
2022-11-17 12:42:25 +01:00 |
Norbert Richter
|
b149da46c6
|
Add DS18x20 parasitic power usage on ESP32
|
2022-11-17 12:24:11 +01:00 |
Theo Arends
|
a924e41ff3
|
Bump version v12.2.0.5
- Fixed ModbusBridge baudrates over 76500 baud (#17106)
- Bump version v12.2.0.5
|
2022-11-17 11:44:51 +01:00 |
Theo Arends
|
99378308f7
|
Update changelogs
|
2022-11-16 14:26:49 +01:00 |
Theo Arends
|
229c2cce06
|
Revert Art-Net to ArtNet
|
2022-11-16 10:55:56 +01:00 |
Stephan Hadinger
|
0849b6e5ef
|
Rename to udp.close()
|
2022-11-16 08:33:13 +01:00 |
Stephan Hadinger
|
f7fa09ebbe
|
Berry add ``udp->stop()`` method
|
2022-11-15 23:28:34 +01:00 |
Theo Arends
|
5f3d504c30
|
Add support for HMC5883L
Add support for HMC5883L 3-Axis Digital Compass sensor by Andreas Achtzehn (#17069)
|
2022-11-15 11:11:32 +01:00 |
Theo Arends
|
e88d1682e9
|
Add command ``SwitchMode 16``
Add command ``SwitchMode 16`` sending only MQTT message on inverted switch change (#17028)
|
2022-11-15 10:10:29 +01:00 |
Theo Arends
|
79c1bd2ae8
|
Merge branch 'development' into zigbee_aqara_plug
|
2022-11-15 09:27:40 +01:00 |
Stephan Hadinger
|
d2d384dc72
|
Zigbee improved Aqara plug support and completed cluster 0x0702
|
2022-11-14 22:46:08 +01:00 |
Stephan Hadinger
|
7950800cb2
|
ESP32 LVGL library from v8.3.2 to v8.3.3 (no functional change)
|
2022-11-14 21:15:38 +01:00 |
Theo Arends
|
c92d51f050
|
Rename ArtNet to Art-Net
|
2022-11-14 14:20:41 +01:00 |
Theo Arends
|
bfbdd49aaf
|
Revert change 2.7.4.9
|
2022-11-14 12:52:25 +01:00 |
Theo Arends
|
60ff102807
|
Update changelogs
|
2022-11-14 12:04:36 +01:00 |
Stephan Hadinger
|
2549203c13
|
Added WS2812 and Light ArtNet DMX control over UDP port 6454
|
2022-11-13 18:22:39 +01:00 |
Stephan Hadinger
|
0cfa2aba74
|
WS2812 sends signal to only ``Pixels`` leds instead of sending to 512 leds
|
2022-11-13 18:00:49 +01:00 |
Theo Arends
|
13c27194ec
|
TuyaMcu rewrite by btsimonh (#17051)
|
2022-11-13 12:55:18 +01:00 |
Stephan Hadinger
|
3731894486
|
Added ``FUNC_NETWORK_UP`` and ``FUNC_NETWORK_DOWN`` events
|
2022-11-11 11:15:05 +01:00 |
Theo Arends
|
e83882b655
|
Update changelogs
|
2022-11-10 13:54:05 +01:00 |
Jason2866
|
f16c555f2b
|
Tasmota core v2.0.5.3
|
2022-11-10 12:49:13 +01:00 |
Theo Arends
|
dd1586fbfc
|
Bump version to v12.2.0.4
- Reverted Flash Mode back from ``DIO`` to ``DOUT`` for ESP8266/ESP8285 (#17019)
|
2022-11-09 12:19:33 +01:00 |
Theo Arends
|
64a609eae2
|
Revert "`DIO` as default for ESP82xx"
This reverts commit 5673e11fac .
|
2022-11-09 11:57:34 +01:00 |
Theo Arends
|
381bfbf5bd
|
Redesign distance sensors VL53LXX, TOF10120, HRXL and DYP
Redesign distance sensors VL53LXX, TOF10120, HRXL and DYP to use cm instead of mm (#17021)
|
2022-11-08 16:59:46 +01:00 |
Theo Arends
|
05b43fb143
|
Redesign distance sensors HRXL and DYP
Redesign distance sensors HRXL and DYP to use cm instead of mm (#17021)
|
2022-11-08 15:27:40 +01:00 |
Jason2866
|
5673e11fac
|
`DIO` as default for ESP82xx
|
2022-11-07 16:47:43 +01:00 |
Theo Arends
|
a469b35f02
|
Bump version to v12.2.0.3
|
2022-11-07 11:06:17 +01:00 |
Norbert Richter
|
050f2e7e61
|
Fix ModbusBridge buffer overflow (#16979)
|
2022-11-06 12:32:30 +01:00 |
Stephan Hadinger
|
e910f3071c
|
Berry add ``dyn`` class
|
2022-11-06 10:52:17 +01:00 |
Stephan Hadinger
|
a5e7917704
|
ESP32 DMX ArtNet optimization to avoid any object allocation and avoid garbage collector pauses
|
2022-11-03 21:54:21 +01:00 |
Theo Arends
|
4e9cfc7629
|
Add command ``SetOption47 1..255``
Add command ``SetOption47 1..255`` to delay power on relay state in seconds reducing power surge
|
2022-11-03 17:26:54 +01:00 |
Stephan Hadinger
|
b2e9001ca2
|
Support for DMX ArtNet Led matrix animations
|
2022-11-02 22:37:53 +01:00 |
Theo Arends
|
0632377192
|
Fix serial initialization
Fix serial initialization for baudrate and config (#16970)
|
2022-11-02 11:24:24 +01:00 |
Stephan Hadinger
|
4c896cd8bc
|
Added Berry ``bytes().reverse()`` method
|
2022-11-01 23:07:15 +01:00 |
Theo Arends
|
79536d8714
|
Update changelog
|
2022-10-31 10:59:49 +01:00 |
Theo Arends
|
7167eb2f46
|
Changed ADE7953 monitoring
Changed ADE7953 monitoring from instant power to accumulated energy (#16941)
|
2022-10-30 12:20:56 +01:00 |
Theo Arends
|
41b65fd6b7
|
Add support for two phase power calibration
Add support for two phase power calibration using commands ``PowerSet2``, ``VoltageSet2`` and ``CurrentSet2``
|
2022-10-30 11:15:17 +01:00 |
Theo Arends
|
7fac661b2e
|
Update changelogs
|
2022-10-29 16:00:47 +02:00 |
Jason2866
|
7cd934fd16
|
Tasmota ESP32 Core v2.0.5.2
|
2022-10-28 15:00:34 +02:00 |
Theo Arends
|
cef18060a0
|
Bump version to v12.2.0.2
Prepare for extended calibration and move some persistent data (PowerLow)
|
2022-10-26 17:59:43 +02:00 |
Theo Arends
|
c5f7195d77
|
Add support for Shelly Pro 1/1PM and 2/2PM (#16773)
|
2022-10-26 17:16:36 +02:00 |
Stephan Hadinger
|
2bf7ea1154
|
Prepare for DMX Artnet support on ESP32
|
2022-10-24 23:05:23 +02:00 |
s-hadinger
|
2295806569
|
Fix changelog
|
2022-10-24 13:55:28 +02:00 |