923ed91c9c
optimize env `tasmota32-zbbrdgpro` ( #22323 )
...
* remove IR Remote from zigbee bridgg
* remove shutters support
* add lib ignores to zigbee bridge env
* remove ENERGY_SENSOR from zigbee bridge 32 env
2024-10-19 14:06:42 +02:00
08d75a5fe3
Add Support for BL0906 up to 6 channel energy monitor as used in Athom EM2/EM6 ( #22167 )
2024-09-25 18:11:07 +02:00
0bddfad14e
No Ethernet support for the C2 ( #21691 )
...
* No Ethernet for the C2
* Post process: Disable always Ethernet for C2
* better check for Ethernet available
* typo
* excluse c2 with `ifndef`
2024-06-25 15:13:16 +02:00
7824378755
Update changelogs
2024-05-21 10:22:29 +02:00
b9bd558abe
Enabled watchdog for ESP32 and variants ( #21422 )
...
* Enabled watchdog for ESP32 and variants
* Ensure compilation for sageboot
* Fix compilation
* Fix compilation for RISCV
2024-05-16 21:19:34 +02:00
1d7498d0b8
remove serial bridge from safeboot ( #21334 )
...
* remove serial bridge from safeboot
* Enable SPI in ESP32 safeboot
2024-05-03 15:31:48 +02:00
76970ddca9
restore config as it was before switch to core 3.0.0
2024-04-18 16:53:11 +02:00
1d04c000e2
Re enable Ethernet in safeboot for ESP32 ( #21199 )
...
by using the Arduino Solo1 framework. The framework has a smaller flash usage
2024-04-16 12:08:53 +02:00
87ed42318a
Temp fix for too big ESP32 Safeboot firmwares
2024-04-15 12:24:31 +02:00
951fba99b1
Breaking: ESP32 Core 3.0.0 only support ( #21180 )
...
* Core 3.0.0 only
* rm Arduino30 settings
* rm lib ignore `NimBLE-Arduino`
* rm obsolete or duplicate env entrys
2024-04-15 11:39:48 +02:00
05f4011491
SSD1306 driver replaced with uDisplay ( #21176 )
2024-04-14 16:46:58 +02:00
d3ab3ced1e
remove touch driver ( #21146 )
...
only UTouch is active
2024-04-11 21:16:22 +02:00
8a06984947
Shrink safeboot size for non ESP32 MCU ( #21115 )
...
* Ethernet in safeboot only for ESP32
2024-04-06 18:27:57 +02:00
6ad2c4c945
LVGL simplify configuration ( #21043 )
2024-03-26 23:16:16 +01:00
48aa621975
enable additionally `USE_UNIVERSAL_TOUCH` ( #21038 )
...
dedicated driver are still enabled. To be disabled when transition to UTouch is finished
2024-03-26 16:34:43 +01:00
6cfe979f1b
Enable GPIO viewer on ESP32
2024-02-05 15:09:49 +01:00
d2690ef7c0
enable CST816S touch driver in firmware lvgl ( #20264 )
2023-12-18 14:02:00 +01:00
7c290388d9
Sonoff Basic R4 Magic switch ( #20247 )
...
* magic switch take 1
* good to go
* good to go
* final, including in tasmota32c3
2023-12-16 18:23:51 +01:00
8ee071b8b8
build process: simplify driver selection for BLE ( #20138 )
...
Co-authored-by: Radio Loge <radiologe@MacBook-Pro-von-Radio.local>
2023-12-01 14:59:59 +01:00
7abf8c469b
Align arduino3 firmware build to Tasmota32 ( #20015 )
...
* step1 of phase out Arduino30 firmware variant
* rm duplicate Matter define
2023-11-14 17:02:00 +01:00
3207d542c1
Fix Zero-Cross Dimmer for ESP32 with Core3 ( #19929 )
...
* Fix Zero-Cross Dimmer for ESP32 with Core3
* Remove left-over
* Fix esp8266
2023-11-04 19:19:48 +01:00
6a86576dac
add MI env ( #19902 )
...
* rename odroid ard3 env to tasmota32-psramfix_ard3
* add inbuilt JTAG debugger
* rm Homekit leftovers
* add MI env
2023-11-02 12:03:14 +01:00
3da80e9144
Enable IR Remote ( #19908 )
2023-11-02 11:33:07 +01:00
367768b00e
Re-enable features for Arduino 3 ( #19761 )
2023-10-16 12:44:05 +02:00
5d97a73ddf
Add ENS16x (air quality) and ENS210 (temp & RH) sensors ( #19479 )
...
* Add files via upload
Added ENS16x library enabling read-out of ENS160 and ENS161 sensor component (follow-up of CCS811 and iAQcore)
Added ENS210 library to read out ENS210 temperature & humidity sensor
* Add files via upload
Add air quality sensor readout for ENS160 and ENS161 checking two possible I2C addresses (follow up sensor for CCS811 and iAQcore)
Add temperature and humidity sensor readout checking two possible I2C addresses
* Update BUILDS.md
Add USE_ENS16x and USE_ENS210
* Update decode-status.py
Add USE_ENS16x and ENS210
* Update I2CDEVICES.md
Add USE_ENS16x and USE_ENS210
* Update my_user_config.h
Add USE_ENS16x and USE_ENS210
* Update support_features.ino
Add USE_ENS16x and USE_ENS210
* Update tasmota_configurations.h
Add USE_ENS16x and ENS210
* Update tasmota_configurations_ESP32.h
Add USE_ENS16x and USE_ENS210
* Update xsns_111_ens16x.ino
Corrected I2X number
* Update xsns_112_ens210.ino
Corrected I2C number
* Disable USE_ENS16x and USE_ENS210 by default
* Added code size information
* cut down in libs
* optimize tasmota side
* fix ens16x web display
* final fix on alternate addresses
* update code & RAM usage
---------
Co-authored-by: Barbudor <barbudor@barbudor.net>
2023-09-24 18:30:15 +02:00
4ebcd89b4f
enable more driver for Arduino 3.0
2023-08-29 19:09:06 +02:00
65a1a4feeb
Neopixel add SPI driver for C2 and some minor updates ( #19372 )
2023-08-24 10:34:17 +02:00
7488ed03f0
Tasmota based on Arduino 3.0.0 ( #19270 )
2023-08-06 13:44:28 +02:00
978a21240c
Update changelogs
2023-07-24 15:30:48 +02:00
465ae023ab
Update change logs
2023-06-29 14:10:49 +02:00
eb655a4a8f
Add support for SGP41 TVOC/NOx Sensor ( #18880 )
...
* Initial support for SGP41
* Removing delay() use from SGP4x driver
* Using i18n for TVOC/NOx raw values as well
2023-06-29 09:04:08 +02:00
0930bbddf5
Fix ESP32 Matter support
2023-06-26 12:38:29 +02:00
b419ae3a92
add matter as a default option in most env ( #18942 )
2023-06-24 11:39:26 +02:00
7b55e1aca2
Make `USE_DISPLAY_MODES1TO5` in firmware `LVGL` possible ( #18729 )
...
* Make `USE_DISPLAY_MODES1TO5` in firmware `LVGL` possible
2023-05-27 17:00:14 +02:00
7cad4f95b6
Enable I2c on webcam
2023-05-14 14:42:11 +02:00
3c951d7751
fix GT911 crash in LVGL firmware ( #18633 )
...
* fix GT911 crash
* remove wrong frag when using GT911
2023-05-10 14:02:51 +02:00
64e844d387
Disable crashing GT911 driver ( #18631 )
2023-05-10 11:28:59 +02:00
eccc1af0a2
disable SHT pig on i2c / add missing GT911 defines ( #18595 )
...
* disable SHT pig on i2c / add missing GT911
* GT911 missing in config
2023-05-07 15:32:15 +02:00
e07efd625f
Add support for GDK101 gamma radiation sensor by Petr Novacek ( #18390 )
2023-04-14 16:50:54 +02:00
d8bdcebc78
xsns_105_lox_o2: LOX-02 Oxygen sensor support ( #18333 )
...
* xsns_105_lox_o2: LOX-02 Oxygen sensor support
* strtof removed, ConvertTemp added
2023-04-06 09:52:15 +02:00
b321fab868
Refactor PCF8574 driver
2023-03-27 15:42:40 +02:00
34ee7c67d8
Update changelogs
...
- Add support for PMSA003I Air Quality Sensor by Jean-Pierre Deschamps (#18214 )
- Add support for DingTian virtual switch/button/relay (#18223 )
2023-03-20 10:21:16 +01:00
5661a6798f
Support for pmsa003i ( #18214 )
...
* Initial support for PMSA003I air quality sensor.
* Updated pmsa003i support to the latest dev branch
* Fixed typo in esp32 configuration
Removed all global variable and use the PM25_AQI_Data struct from Adafruit library
Fix typo Xsns100 to Xsns104
Fix Typo XI2C_71 to XI2C_78
* Move everything in custom Struct for PMSA003I driver
---------
Co-authored-by: Jean-Pierre Deschamps <info@jpdeschamps.com>
2023-03-20 09:52:22 +01:00
a72bbbe30a
Add interrupt control to MCP23xxx driver
...
- Add interrupt control to MCP23xxx driver
- Enable ADE7880 in tasmota32.bin
2023-03-02 11:24:54 +01:00
159d1ae312
Breaking change Shelly Pro 4PM
...
- Add support for multiple MCP23017/MCP23S17 as switch/button/relay
- Breaking change Shelly Pro 4PM using standard MCP23xxx driver
2023-03-01 16:52:34 +01:00
8ea8d34d17
Make setting of `CODE_IMAGE_STR` in Platformio possible ( #18011 )
...
* OTA_URL safeguard
* make override possible
2023-02-22 12:05:04 +01:00
c699131103
Add Shelly Pro 4PM to lvgl binary
2023-02-05 16:22:18 +01:00
2c9f1fef0d
Biopdu-v1.1.0 ( #17857 )
...
* BioPDU language labels
* xnrg_33 BioPDU 625x12 driver
* missing enums
* Rename energy driver from 33 to 24
* Removed driver 33
2023-02-02 19:09:24 +01:00
2ed602057c
Add SEN5X to I2C devices ( #17736 )
2023-01-29 08:06:25 +01:00
404589c860
Enable USE_WE517 in tasmota32.bin
2023-01-02 11:38:08 +01:00
Jason2866
Theo Arends
s-hadinger
Barbudor
Christian Baars
Christoph Friese
Andrew Klaus
Anton ACE
Jean-Pierre Deschamps
Fabrizio Amodio
Tyeth Gundry