Commit Graph

212 Commits

Author SHA1 Message Date
Theo Arends fc8b4dcc71 Add Shelly3EM Neutral Current information 2022-03-26 16:02:50 +01:00
rice103 e72248899e Supports for MQ analog sensor for air quality
It's support the analog sensor for quality air (also for esp-32)
-added on list of assignable pins in module
-with adcparams can choose wich mqx you have with seconds param ex: adcparam 10 4 (you have the mq-04)
2022-01-23 17:10:35 +01:00
Theo Arends 33ff4fa056 Add undocumented JSON command 2022-01-23 12:29:06 +01:00
Theo Arends 4df42a28f5 Add command ``WebTime <start_pos>,<end_pos>``
- Add command ``WebTime <start_pos>,<end_pos>`` to show part of date and/or time in web gui based on "2017-03-07T11:08:02-07:00"
- Bump version to v2022.01.3
2022-01-16 16:19:28 +01:00
Marcus 8bc06238f3 changed: tasmota/i18n.h
missed this change. Now tasmota-sensors compiles with success!
2022-01-15 14:14:32 +01:00
Stephan Hadinger 5f002dc467 Set ESP32 stack size with ``#define SET_ESP32_STACK_SIZE``, added ``StackLowMark`` metrics 2022-01-03 18:52:30 +01:00
Theo Arends 4962fd229e Add command ``SSerialConfig <serialconfig>`` to change Serial Bridge configuration
Add command ``SSerialConfig <serialconfig>`` to change Serial Bridge configuration
2021-12-25 12:58:24 +01:00
jziolkowski 63ff462f53 using pointer for Shift595, refactored pin init 2021-12-05 13:40:01 +01:00
jziolkowski 8c12424d78 WIP 2021-12-04 15:39:00 +01:00
Stephan Hadinger b409377068 MQTT TLS dual mode (CA or fingeprint) in same firmware, ``SetOption132 1`` to force fingerprint 2021-12-01 21:38:28 +01:00
Theo Arends dbec7712ad
Merge pull request #13595 from kruzer/stairs-pixels
Add simple stairs effects to ws2812 driver
2021-11-18 09:13:13 +01:00
stefanbode 65be8e6b59
Introduced: shuttertiltchange
shuttertiltchange allows a change of the tilt. Most likely used with buttons
2021-11-16 13:04:02 +01:00
stefanbode 3f3f095962
Shutter Tilt commands 2021-11-07 14:13:12 +01:00
kruzer bf8a8c621e added config variable StepPixels 2021-11-01 12:31:08 +01:00
Theo Arends c4bb190e82 Add split total energy 2021-10-02 18:29:05 +02:00
Theo Arends b47e91c8ab Add energy total spilt 2021-09-29 15:33:58 +02:00
Theo Arends 9b35c54ed1 Revert "Add support for split energy totals"
This reverts commit d3fc03d398.
2021-09-29 14:53:23 +02:00
Theo Arends d3fc03d398 Add support for split energy totals
Add command ``SetOption129 1`` to enable split total energy results (#13030)
2021-09-29 12:08:03 +02:00
Theo Arends 7c71c3bdd8 Add command ``WebQuery <url> GET|POST|PUT|PATCH [<headers>] <body>``
Add command ``WebQuery <url> GET|POST|PUT|PATCH [<headers>] <body>`` to extent HTTP requests (#13209)
2021-09-24 11:34:44 +02:00
Barbudor cc51a37738 add command webgetconfig 2021-09-01 21:30:54 +02:00
Theo Arends de2e86f022
Merge pull request #12651 from mbezuidenhout/feature/can-bus
Feature/can bus
2021-07-17 14:52:12 +02:00
Theo Arends 6cd9a7d899 Add command ``SetSensor1..127 0|1`` to globally disable individual sensor driver 2021-07-14 14:20:50 +02:00
Marius Bezuidenhout 024cc0b9b6 Added MCP2515 library and Freedom Won BMS sensor 2021-07-12 12:32:27 +02:00
Stephan Hadinger 1c15552210 Command ``SetOption127 1`` to force Wifi in no-sleep mode even if ``Sleep 0`` is not enabled 2021-07-05 13:43:41 +02:00
Theo Arends bd87afeabf Add command ``MqttWifiTimeout 100..20000``
Add command ``MqttWifiTimeout 100..20000`` to control MQTT Wi-Fi connection timeout default set to 200 mS (#12222)
2021-06-15 10:15:36 +02:00
Adrian Scillato f0d9605b4b
Add actual Wi-Fi mode (b/g/n) to STATUS 11 2021-06-04 09:52:25 -03:00
Stephan Hadinger 6d54949273 LVGL prepare M5StickC 2021-05-25 18:53:10 +02:00
Theo Arends fb44348a8c Add support for MQTT Settings save/restore 2021-05-08 17:40:13 +02:00
Theo Arends 17996ce87c Prep for MQTT Settings save 2021-05-08 15:26:23 +02:00
Theo Arends 1ace2d2292 Add initial support for optional for template specific commands
Add initial support for optional ``Template`` JSON fieldpair ``"CMND":"<any template related command>;<any template related command>;..."`` (#11788)
2021-04-25 17:22:38 +02:00
Theo Arends 2bf681dbe2 Revert "Add initial support for optional for template specific commands"
This reverts commit b44c16d861.
2021-04-25 17:03:11 +02:00
Theo Arends b44c16d861 Add initial support for optional for template specific commands
Add initial support for optional ``Template`` JSON fieldpair ``"CMND":"<any template related command>;<any template related command>;..."`` (#11788)
2021-04-25 16:51:18 +02:00
Stephan Hadinger bd60b9b602 Add LVGL 7.11 support with Berry binding (ESP32 only) 2021-04-19 08:40:11 +02:00
Theo Arends 571649a082 Tasmotize M5Core2 support 2021-04-15 17:21:18 +02:00
Theo Arends 5cdf225fe0 Refactor ESP32 sensors 2021-04-12 16:50:04 +02:00
Theo Arends 740e4392ef Add command EnergyConfig for future use 2021-04-09 09:49:33 +02:00
Theo Arends 1a2addfc16 Refactor GUI save settings (prt2) 2021-04-08 17:57:37 +02:00
Theo Arends 75bbe5d3fa Change ADC range result from int to float
Change ADC range result from int to float using command ``FreqRes`` for decimal resolution selection (#11545)
2021-04-02 15:50:59 +02:00
Theo Arends 2710dc8dd0 Add command ``SerialBuffer 256..520``
Add command ``SerialBuffer 256..520`` to change hardware serial receive buffer size from default (256) to max local buffer size (520) (#11448)
2021-04-01 15:53:47 +02:00
blakadder 3768d5ab9f add gas sensor with %LEL units 2021-03-29 20:32:59 +02:00
Theo Arends be72bde8f5 Add ESP32 support for internal Hall Effect sensor
Add ESP32 support for internal Hall Effect sensor connected to both GPIO36 and GPIO39 only
2021-03-27 15:15:15 +01:00
Theo Arends dd4f16526e Fix sensor coexistence 2021-03-23 12:57:56 +01:00
RaphDaMan d8e892a0de Changes proposed by Theo on PR. 2021-03-23 08:50:49 +01:00
RaphDaMan 587ad9a733 Squashed commit of the following:
commit 6c9c4a83d0076bb9303d65d5435f0d0bf2e81a6b
Author: RaphDaMan <raphael@my107.de>
Date:   Sat Mar 20 13:49:36 2021 +0100

    v0.7 Final and ready to PR.
2021-03-20 14:14:07 +01:00
Theo Arends d5ca2994ee Add commands MqttKeepAlive and MqttTimeout
- Add commands ``MqttKeepAlive 1..100`` to set Mqtt Keep Alive timer (default 30) and ``MqttTimeout 1..100`` to set Mqtt Socket Timeout (default 4) (#5341)
- Changed PubSubClient library from EspEasy v2.7.12 to Tasmota v2.8.12
- Bump version to 9.3.1.2
2021-03-18 17:44:10 +01:00
Stephan Hadinger 95e696075e Add support for MPU6686 on primary or secondary I2C bus 2021-03-15 21:06:50 +01:00
Paul C Diem 67d24047fc Add device_group_tie in SettingsDefaultSet2 and show all groups 2021-03-09 13:41:14 -06:00
Stephan Hadinger d0168863a2 Renamed CC2530 to CCxxxx 2021-03-02 22:38:41 +01:00
Theo Arends 14db5ea0dd
Merge pull request #11084 from jeroenst/infoandstateretain
Added options to retain info and state mqtt messages
2021-02-22 13:52:16 +01:00
JeroenSt dde67c5b46 Added options to retain info and state mqtt messages
https://github.com/arendst/Tasmota/discussions/11067

Changed version to current version in comments
https://github.com/arendst/Tasmota/pull/11079#discussion_r580057981
2021-02-22 12:19:32 +01:00