505c4794d1
6.4.1.11 Rewrite interlock
...
6.4.1.11 20190124
* Remove command SetOption14 as it has been superseded by command Interlock
* Remove command SetOption63 as it has been superseded by command Interlock
* Add command Interlock 0 / 1 / 1,2 3,4 .. to control interlock ON/OFF and add up to 8 relays in 1 to 4 interlock groups (#5014 )
2019-01-25 17:46:27 +01:00
7745e1e779
Fix Hass Software Watchdog
...
Fix Hass Software Watchdog exception during discovery (#4988 )
2019-01-22 12:46:55 +01:00
b5824fc361
Housekeeping
2019-01-18 10:52:18 +01:00
e7e378f463
Add (S)SerialSend features
...
* Fix mDNS addService (#4938 , #4951 )
* Add (S)SerialSend3 escape sequence \x to allow hexadecimal byte value (#3560 , #4947 )
* Add SerialBridge command SSerialSend5 <hexdata>
2019-01-17 17:48:34 +01:00
e5fd45c9c8
6.4.1.9 Fix mDNS addService
...
6.4.1.9 20190115
* Add support for Mi LED Desk Lamp with rotary switch (#4887 )
* Fix mDNS addService (#4938 )
2019-01-15 16:11:42 +01:00
2aac0683be
Add support for Mi Desk Lamp
2019-01-14 22:53:15 +00:00
15e4918238
As requested in issue 824# by ascillato2, implement split interlock.
...
=> Split interlock of SONOFF with more than 2 channel into 2 groups
=> This is needed for shutter and similar utilization
2019-01-13 11:00:02 +01:00
23fa3c624a
Clarify Link/Power LED selection
...
Clarify Link/Power LED selection
2019-01-08 11:44:45 +01:00
148fe4aec0
Only restart if module supports it
2019-01-07 16:58:44 +01:00
a23f01080b
6.4.1.8 Add template flags
...
6.4.1.8 20190107
* Change sonoff_template.h layout regarding optional module flags like ADC0
* Add command SetOption62 1 to force no Button/Switch pullup on dedicated modules. Currently only supported on Shelly2 (#4841 )
2019-01-07 16:33:18 +01:00
95f39be2ef
Change button driver making it modular
...
Change button driver making it modular
2019-01-07 12:38:47 +01:00
3d31dd1457
Disable Button/Switch 4 seconds
...
Disable both Buttons and Switches 4 seconds after power on to workaround Wemos and Obi startup issues.
2019-01-07 10:15:00 +01:00
e1d903eab3
Add no pull-up control to Shelly 2
...
Add no pull-up control to Shelly 2 module (default is pull-up, change GPIO2 to Switch3n for no pull-up) (#4841 )
2019-01-06 18:50:56 +01:00
0195cabbd6
Add relay status functionality to LED2
...
Add relay status functionality to LED2 when configured leaving LED1 for (wifi/mqtt) status indication
2019-01-06 18:02:21 +01:00
67cf1dbbcf
6.4.1.5 Add mDns user control
...
6.4.1.5 20190103
* Remove command SetOption35 0-255 for mDNS start-up delay (#4793 )
* Add command SetOption55 0/1 to disable/enable mDNS (#4793 )
2019-01-03 17:30:54 +01:00
447ec6256e
6.4.1.4 Update Copyright (C) 2019
...
6.4.1.4 20190101
* Update Copyright (C) 2019
2019-01-01 13:55:01 +01:00
7ebb7a6067
6.4.1.3 Change sonoff_template.h
...
6.4.1.3 20181229
* Change sonoff_template.h module lay-out by removing non-configurable GPIOs
2018-12-29 19:46:28 +01:00
afe83a3460
Prep for template tuning
2018-12-29 17:19:13 +01:00
5a44b12870
6.4.1.2 Rewrite Switch driver
...
6.4.1.2 20181228
* Change switch driver making it modular and introduce input filter (#4665 , #4724 )
* Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (#4738 )
* Add variable %timestamp% to rules (#4749 )
2018-12-28 16:35:19 +01:00
9640931345
Change switch debounce
...
Change switch input detection by optimizing switch debounce (#4724 )
2018-12-26 14:21:00 +01:00
0b10f48e41
6.4.1.1 Fix most compiler warnings
...
6.4.1.1 20181224
* Fix most compiler warnings
2018-12-24 18:14:25 +01:00
77c07a2e00
Change FallbackTopic
...
Change FallbackTopic from cmnd/<mqttclient>/ to cmnd/<mqttclient>_fb/ to discriminate from Topic (#1528 )
2018-12-23 14:48:57 +01:00
e2cd656286
6.4.0.3 Hass and Alexa fixes
...
6.4.0.3 20181222
* Change Hass discovery to short MQTT messages as used by Hass 0.81 and up (#4711 )
* Change FallbackTopic detection (#4706 )
* Add define WIFI_SOFT_AP_CHANNEL in my_user_config.h to set Soft Access Point Channel number between 1 and 13 as used by Wifi Manager web GUI (#4673 )
* Fix Alexa "this value is outside the range of the device". Needs power cycle and Alexa deletion/discovery cycle. (#3159 , #4712 )
2018-12-22 16:13:07 +01:00
dcbf5a8c94
Fix ArduinoOTA for Core 2.5.0 (fix is backwards compatible)
...
https://github.com/arendst/Sonoff-Tasmota/issues/4619
2018-12-13 23:04:48 +00:00
67ec0678a3
6.3.0.17 Add features
...
6.3.0.17 20181211
* Add support for TheoV2 sensors as documented on https://sidweb.nl
* Add support for SDM220 (#3610 )
* Enhance support for MPU6050 using DMP (#4581 )
2018-12-11 14:24:52 +01:00
a65041fee5
Enabled forced local operation when button- or switchtopic is set
2018-12-08 08:44:59 +01:00
9a3c3895fb
Fix Domoticz Fanspeed
...
Fix Domoticz Fanspeed
2018-12-06 15:03:42 +01:00
61aa428646
6.3.0.16 - Bump version
...
6.3.0.16 20181201
* Add support for iFan02 Fanspeed in Domoticz using a selector (#4517 )
* Add Announce Switches to MQTT Discovery (#4531 )
2018-12-06 11:17:25 +01:00
9471163d86
Merge pull request #4531 from emontnemery/hass_announce_switch
...
MQTT Discovery - Announce switches
2018-12-06 11:02:40 +01:00
e64c8d61c9
Update sonoff.ino
2018-12-06 11:01:57 +01:00
dfa0d2ef11
Add Domoticz Selector for Fanspeed
...
Add support for iFan02 Fanspeed in Domoticz using a selector (#4517 )
2018-12-06 10:49:49 +01:00
4b287ab4cb
Final fix compile error ( #4509 )
...
Final fix soft_spi_flg compile error (#4509 )
2018-12-05 12:23:42 +01:00
be19af15e2
Announce switches
2018-12-04 21:32:02 +01:00
a2e865bb44
Add dummy soft_spi_flg to satisfy compiler
...
@arendst Just adding this, for now, to satisfy the compiler until you get time to merge the rest of the Software SPI support.
2018-12-02 18:53:49 +02:00
74172f14d3
Further improve Hass auto discovery
2018-12-02 16:39:59 +01:00
eb3c1a327d
6.3.0.15 Update dynamic sleep
...
6.3.0.15 20181201
* Removed command SetOption36 (#4497 )
* Add command SetOption60 0/1 to select dynamic sleep (0) or sleep (1) (#4497 )
2018-12-01 18:53:42 +01:00
6050cd40f3
Merge sleep command
2018-12-01 18:47:25 +02:00
5f402c8f34
Fix sleep->SetOption36 transition
2018-12-01 00:18:08 +02:00
3613946f18
Prevent sleep and SetOption36 being used concurrently
...
Prevent sleep and SetOption36 being used concurrently
2018-11-30 20:00:20 +02:00
eb851a9a90
Merge pull request #4450 from emontnemery/hass_send_tele
...
WIP - Support sending tele/STATUS as state/RESULT
2018-11-26 12:49:43 +01:00
acdbd39124
Fix math in LoadAvg
...
Fix the math in LoadAvg calculation. To keep average we take away one Nth of loops and add one Nth of current cycle ration to the average.
Now the math makes more sense... maximum load average on setoption36 0/1 = 999 (as it should be)
2018-11-26 11:37:15 +02:00
eda60b6124
Support sending tele/STATUS as state/RESULT
2018-11-25 21:27:19 +01:00
243ec16d80
Fix another calcuation error
...
Fix another calcuation error
2018-11-25 17:31:53 +01:00
0b14a95082
Remove assumption of 100% to report correctly
...
Remove the assumption of 100% loop duty cycle as we want an accurate loop load average and not a percentage as such - so if it overshoots the value stored for setoption36 this should be known by looking at the load average and not be distorted by reducing it to 100 basis points on the assumption that my_acitivity took as long as setoption36.
2018-11-25 17:52:07 +02:00
05be1ee21c
Fix exception due to divide by 0
...
Fix exception due to divide by 0
2018-11-25 16:41:29 +01:00
7c84f892fc
Add target loop delay to telemetry
2018-11-25 14:29:53 +02:00
c22fcc2a3a
Update CPU average load function
...
Remove unnecessary manipulations :)
2018-11-24 19:00:42 +02:00
52eeef95f0
Add CPU average load
...
Add CPU average load to state message (#4431 )
2018-11-24 17:43:18 +01:00
4700e49d70
Update sonoff.ino
2018-11-24 17:16:27 +01:00
0e56044eb5
Add main loop load average
...
Add main loop avarage duty cycle measured against setoption36 value to telemetry data as LoadAvg
2018-11-24 18:12:49 +02:00
Theo Arends
dh.harald
lobocobra
Adrian Scillato
Erik
andrethomas2
andrethomas