Commit Graph

13373 Commits

Author SHA1 Message Date
arendst 46dd474c6a v4.1.2
4.1.2 20170403
* Rename Unrecognised command to Unknown command
* Remove all command lists
* Remove command SmartConfig (superseded by WifiConfig)
* Fix boot loop when selecting module Sonoff 4CH or Sonoff Touch on non
ESP8285 hardware
* Add optional support for Toshiba and Mitsubishi HVAC IR control (needs
updated IRanother  (#83, #257)
* Add all configured switches to Domoticz Configuration web page (#305)
* Fix compile error when selecting WS2812 DMA (#313)
2017-04-03 16:40:13 +02:00
arendst fcb380ce2c v4.1.2
4.1.2 20170403
* Rename Unrecognised command to Unknown command
* Remove all command lists
* Remove command SmartConfig (superseded by WifiConfig)
* Fix boot loop when selecting module Sonoff 4CH or Sonoff Touch on non
ESP8285 hardware
* Add optional support for Toshiba and Mitsubishi HVAC IR control (needs
updated IRanother  (#257)
* Add all configured switches to Domoticz Configuration web page (#305)
* Fix compile error when selecting WS2812 DMA (#313)
2017-04-03 16:38:15 +02:00
arendst 6824c8ac8a Update library for HVAC 2017-04-03 15:07:49 +02:00
arendst a8f2293a66 v4.1.1
4.1.1 20170329
* Fix default Telemetry for command Prefix3
* Fix webserver Module parameters for disabled select
* Fix sensor status for enabled switches
* Remove Light as alternative for Power (save code space)
* Remove migration option from pre V3 (code cleanup)
* Remove unofficial SPIFFS support (code cleanup)
* Remove command list when unknown command is entered (save code space)
* Rename Status11 json from StatusPWR to unique StatusSTS
* Rename command Gateway to IPAddres2, Subnetmask to IPAddress3 and
DnsServer to IPAddress4 (save code space)
* Add Command MqttResponse to select either command or RESULT topic as
response (#258)
* Add command StateText1 to StateText3 to assign MQTT_STATUS_OFF,
MQTT_STATUS_ON and MQTT_CMND_TOGGLE respectively (#286)
* Remove restart after IPAddress changes (#292)
* Add support for MAX31850 in xsns_ds18x20.ino (#295)
* Fix possible uptime update misses (#302)
2017-03-29 18:42:05 +02:00
arendst 81eb44aa8c Revert "Updated library"
This reverts commit 659fa92610.
2017-03-29 18:24:57 +02:00
arendst 659fa92610 Updated library 2017-03-29 18:14:16 +02:00
arendst ae27ec26a4 v4.1.0
4.1.0 20170325
* Change static IP addresses in user_config.h from list (using commas)
to string (using dots)
* Unify display result of commands Modules, Module and Gpios
* Rewrite Module selection web page to bring size down from 18651 to
4319 bytes (!) (#234, #240)
* Add basic support for (Lixada) H801 RGBWW controller (#252)
* Add command Prefix1 to Prefix3 to assign SUB_PREFIX, PUB_PREFIX and
PUB_PREFIX2 respectively (#255)
* Add static ip addresses to flash (#262)
* Add commands IpAddress, Gateway, Subnetmask and DnsServer to select
static ip addresses (#273)
2017-03-25 17:24:11 +01:00
arendst 99b7474ac4 v4.0.8
4.0.8 20170321
* Fix entering non-numeric webpassword
* Force selection between TLS or Webserver due to memory restraint
(#240)
* Allow entering empty string using "0" for selected commands (#242)
* Fix exception when posting commands to web console containing % (#250)
2017-03-21 16:17:28 +01:00
arendst 742a87df8a v4.0.7
4.0.7 20170319
* Increased Sonoff Led PWM frequency from 432 to 1000
* Fix possible watch dog reboot after changing module type on web page
* Fix reporting of GPIO usage from web page
* Fix Sonoff Led blank during firmware upgrade
* Fix Sonoff Led flicker and possible flash corruption by using latest
Arduino-esp8266 versions
*   of pwm core files included in sonoff library (#211)
* Add PWM output control with commands PWM1 to PWM5 using user
selectable GPIOs (#211)
* Fix exceptions due to low values of commands HlwPCal (10000), HlwUCal
(1000) and HlwICal (2500) (#223)
* Add Switch state to sensor status (#227, #233)
* Add user configuarble GPIO to module Sonoff Touch (#228)
* Add define WEB_PORT to user_config.h to change default web server port
from 80 (#232)
* Fix failed Ota Firmware upgrade started from Web page (#235)
2017-03-19 18:19:08 +01:00
arendst c4cdd4459c v4.0.6
4.0.6 20170316
* Fix to better find device by Wifi hostname
* Fix compile error when some I2C devices are disabled
* Add (experimental) support for SHT1X emulating I2C (#97)
* Add ADC to ElectroDragon (#203)
* Add support for Sonoff Dev (#206)
2017-03-16 16:23:11 +01:00
Theo Arends 7aebdbbacf Update README.md 2017-03-15 12:46:46 +01:00
Theo Arends 7aa1df1da8 Update README.md 2017-03-15 12:17:11 +01:00
Theo Arends 06ba6b2b20 Update README.md 2017-03-15 12:15:28 +01:00
Theo Arends d9c654a2b1 Update README.md 2017-03-15 12:14:04 +01:00
Theo Arends a68d9aeb6d Update README.md 2017-03-15 12:13:06 +01:00
Theo Arends 29ee113153 Update README.md 2017-03-14 23:06:15 +01:00
Theo Arends 919e861456 Update README.md 2017-03-14 23:05:21 +01:00
Theo Arends 9729a50098 Update README.md 2017-03-14 23:03:13 +01:00
Theo Arends 4952eeb71b Update README.md 2017-03-14 23:02:16 +01:00
Theo Arends 97bc30a25b Update README.md 2017-03-14 23:01:31 +01:00
Theo Arends a566c3fc6c Update README.md 2017-03-14 23:00:18 +01:00
Theo Arends e7ab4b9702 Update README.md 2017-03-14 22:59:21 +01:00
Theo Arends 5d44b1dc31 Update README.md 2017-03-14 22:58:04 +01:00
Theo Arends f9e8359756 update 2017-03-14 22:56:41 +01:00
Theo Arends 00036420c0 Update README.md 2017-03-14 22:54:08 +01:00
Theo Arends eb98a653f5 Update README.md 2017-03-14 22:51:22 +01:00
arendst 67fe118dfe v4.0.5
4.0.5 20170314
* Add command Status 11 to show power status with Vcc if define
USE_ADC_VCC is enabled (default)
* Add ADC input to Sonoff SV and Wemos D1 mini - Needs recompile with
define USE_ADC_VCC disabled (#137)
* Add MQTT host:port to timeout message (#199)
2017-03-14 18:03:25 +01:00
arendst 5e4157ebe4 Revert "v4.0.5"
This reverts commit 18a1f5e5df.
2017-03-14 15:40:24 +01:00
arendst 18a1f5e5df v4.0.5
4.0.5 20170314
* Add command Status 11 to show power status with Vcc if define
USE_ADC_VCC is enabled (default)
* Add ADC input to Sonoff SV and Wemos D1 mini - Needs recompile with
define USE_ADC_VCC disabled (#137)
* Add MQTT host:port to timeout message (#199)
2017-03-14 12:36:06 +01:00
arendst b85fef0479 v4.0.4
4.0.4 20170312
* Add pulse timers for up to 4 relays (#106)
* Fix Sonoff Led power state when dimmer or color is 0 (#176)
* Add command NtpServer<x> to configure up to three NTP servers (#177)
* Delete module User Test as module Wemos D1 mini has same/more user
configurable GPIO (#178)
* Add more user configurable GPIO to module ElectroDragon (#183)
2017-03-12 18:36:33 +01:00
arendst 59bb20d2cb v4.0.3
4.0.3 20170309
* Renamed Module NodeMCU to WeMos D1 mini
* Add GPIO1 as user option to some modules
* Add Buttons, Relays and Leds to user configurable options (#159)
* Add description on Module parameters web page to some well known GPIOs
(#107, #171)
2017-03-09 17:48:04 +01:00
arendst 7786889e90 Updated esp8266/esp8285 selection 2017-03-08 18:08:47 +01:00
arendst ac84010015 v4.0.2
4.0.2 20170308
* Restore correct seriallog level after Serial logging was disabled
* Add simple dimmer slider to Sonoff Led web page
* Reduced root webpage size by 31%
* Expand Status 2 with Build date/time and core version
* Fix webserver redirection when not in WifiManager mode (#156)
* Add command ButtonRestrict On/Off to restrict access to button hold
and button multi press options above 2 (#161)
* Fix DS18S20 negative temperature readings (#165)
* Fix crlf compilation error due to bad syntax (#144, #167)
2017-03-08 16:20:45 +01:00
arendst 4797696b39 Add linefeed normalisation 2017-03-07 09:36:01 +01:00
arendst 47d711b1b2 v4.0.1
4.0.1 20170305
* Fix char default sizes and set MESSZ to 360 (#143)
* Fix SerialLog setting status
* Disable syslog when emulation is active
* Add DS18B20 web page display refresh
2017-03-05 15:07:30 +01:00
arendst acb5252b54 v4.0.0
4.0.0 20170303
* Add define to remove config migration code for versions below 3.0 (See
Wiki-Upgrade-Migration path)
* Free memory by switching from String to char[]
* Raised Sonoff Led PWM frequency from 200Hz to 432Hz in search of
stability (hardware watchdog timeouts) (#122)
* Increase message size and suggested minimum MQTT_MAX_PACKET_SIZE to
512 (#114, #124)
* Remove runtime warning message regarding MQTT_MAX_PACKET_SIZE too
small as it is now moved to compile time (#124)
* Fix possible panics with web console and http commands while UDP
syslog is active (#127)
* Add optional static IP address (#129)
* Add define ENERGY_RESOLUTION in user_config.h to allow user control
over precision (#136)
2017-03-03 12:35:23 +01:00
arendst 4a989fb8c6 Updated minimum MQTT_MAX_PACKET_SIZE to 512 2017-03-01 11:33:32 +01:00
arendst fc3b7e22ab v3.9.22
3.9.22 20170228
* Update web console
* Fix Status 4 JSON message
* Add Exception info during restart if available
* Add osWatch service to detect loop hangs that might happen during
(OTA) upgrades
* Add WiOn support for relay and switch only (#82, #102)
* Allow for user specified relay count up to four in sonoff_template.h
(#109)
* Add support for HTU21 compatible I2C sensors SI7013, SI7020 and SI7021
(#118)
* Add NodeMCU or Wemos configuration option (#119)
2017-02-28 16:01:48 +01:00
arendst 3fefb9b931 v3.9.21
3.9.21 20170224
* Add ajax to web root page and web console (#79)
* Add commands SwitchMode1..4 and enable user switches 2, 3 and 4 (#84,
#88)
* Fix MQTT upgrade when webserver is active
2017-02-24 18:17:48 +01:00
arendst 3f73e48bfa v3.9.20
3.9.20 20170221
* Add minimal basic authentication to Web Admin mode (#87)
* Fix Hue and add HSB support (#89)
2017-02-21 18:14:33 +01:00
arendst aaabe37f15 Add correct libraries
Arduino IDE: Place libraries in portable/sketchbook/libraries folder.
PlatformIO: Place libraries in your projects lib folder.
2017-02-21 09:50:32 +01:00
arendst 18aaf05622 v3.9.19
3.9.19 20170219
* Sonoff Led: Made GPIO04, 05 and 15 available for user
* Sonoff Led: Add commands Fade, Speed, WakupDuration, Wakeup and
LedTable
2017-02-19 17:49:17 +01:00
arendst 3997f48809 v3.9.18
3.9.18 20170218
* Fix ledstate 0 to turn off led
* Fix Sonoff Led dimmer range (#16)
* Change Sonoff Led command Dimmer to act on both cold and warm color
* Add Sonoff Led command Color CCWW where CCWW are hexadecimal values
fro 00 - FF
* Reduce Sonoff Led flickering by disabling interrupts during flash save
and disabling
*   Led during OTA upgrade and Web upload (#16)
2017-02-18 18:08:55 +01:00
arendst edca508f57 v3.9.17
3.9.17 20170217
* Fix possible ArduinoJSON related memory fragmentation
* Changed console logging using less memory
* Add GPIO04 as user selectable for Sonoff Dual (#75)
2017-02-17 17:18:41 +01:00
arendst 381bb4b50c v3.9.16
3.9.16 20170214
* Update latching relay handler
* Add support for IR led using IRremoteESP8266 library (#59)
* Add Hue argument passing using ArduinoJSON library (#59)
2017-02-14 14:27:08 +01:00
arendst 533855c210 v3.9.15
3.9.15 20170213
* Change JSON float values from string to number according to
http://json.org (#56)
* Add support for exs latched relay module
https://ex-store.de/ESP8266-WiFi-Relay-V31 (#58)
* Add support for inverted relays
* Changed MAX_LOG_LINES from 70 to 60 to preserve memory
2017-02-13 17:25:46 +01:00
arendst bb5251c2c8 v3.9.14
3.9.14 20170211
* Add False and True as alternatives for 0/Off and 1/On (#49)
* Fix Status10 JSON format (#52)
* Fix DS18x20 using OneWire library (#53)
2017-02-11 15:06:23 +01:00
arendst 3a07c9bf6a v3.9.13
3.9.13 20170210
* Add FlashChipSize to Status 4
* Removed redundant DHT2 option and code
* Add Sonoff SV GPIO pin 05 configuration (#40)
* Add configuration file backup and restore via web page
* Fix latency due to light_sleep mode even if sleep was set to zero
(#50)
2017-02-10 17:22:06 +01:00
arendst cbd1904b42 v3.9.13
3.9.13 20170210
* Add FlashChipSize to Status 4
* Removed redundant DHT2 option and code
* Add Sonoff SV GPIO pin 05 configuration (#40)
* Add configuration file backup and restore via web page
* Fix latency due to light_sleep mode even if sleep was set to zero
(#50)
2017-02-10 17:03:34 +01:00
arendst 971ffef4a9 v3.9.12
3.9.12 20170208
* Fix compile error when webserver is disabled (#30)
* Fix possible ESP8285 flash problem by updating Flash Chip Mode to DOUT
during OTA upload
* Fix hostname issues by not allowing user entry of string formatting
and removing from user_config.h (#36)
2017-02-08 12:56:51 +01:00