6.1.1.9
* Allow user override of define MAX_RULE_TIMERS (#3561)
* Allow user override of define MAX_RULE_VARS
* Add GPIO options ButtonXn, SwitchXn and CounterXn to select INPUT mode instead of INPUT_PULLUP (#2525)
* Fix OtaMagic when file path contains a dash (-) (#3563)
* Added command KNX_GA so as to setup Group Address to Send Data/Commands
Usage:
KNX_GA
(return the amount of GA configured)
KNX_GA 1
(return the configuration of the GA#1
KNX_GAx option, area, line, member
(Set the configuration of the GA#x)
example: KNX_GA3 1, 2,2,4
For the GA#3, the status of Relay 1 is sent to 2.2.4
* Added command KNX_CB so as to setup Group Address to Receive Data/Commands
KNX_CBx option, area, line, member
example: KNX_CB2 1, 2,2,4
For the CB#2, listen to 2.2.4 to set the status of the Relay 1
Posible values of the parameter OPTION:
1 - Relay 1
2 - Relay 2
3 - Relay 3
4 - Relay 4
5 - Relay 5
6 - Relay 6
7 - Relay 7
8 - Relay 8
9 - Button 1
10 - Button 2
11 - Button 3
12 - Button 4
13 - Button 5
14 - Button 6
15 - Button 7
16 - Button 8
17 - TEMPERATURE
18 - HUMIDITY
19 - ENERGY_VOLTAGE
20 - ENERGY_CURRENT
21 - ENERGY_POWER
22 - ENERGY_POWERFACTOR
23 - ENERGY_DAILY
24 - ENERGY_START
25 - ENERGY_TOTAL
26 - KNX_SLOT1
27 - KNX_SLOT2
28 - KNX_SLOT3
29 - KNX_SLOT4
30 - KNX_SLOT5
255 - EMPTY
Added the EVENT KNXRX_VAL1...5 when receiving values from the KNX Network or another Tasmota with KNX
Now, sensor values (for example) can be sent from one device to another.
6.0.0a
* Add support for uploading Sonoff Bridge firmware found in
tools/fw_efm8bb1 folder build by Portisch using Web Gui File Upload
(#2886)
* Add command RfRaw to control Portisch firmware features
* Added Console Commands to send KNX Commands
usage: KnxTx_Cmnd[slot] command
where [slot] is any of the 5 slots on the KNX Menu and command is 0 or 1
example: KnxTx_Cmnd1 0
* Added Console Commands to send KNX Values
usage: KnxTx_Val[slot] value
where [slot] is any of the 5 slots on the KNX Menu and value is a number
example: KnxTx_Val1 35
* Added Slots on the KNX Web Menu to select Group Addess to send data from console commands
* Added Events to trigger rules when received data from KNX
usage on rules as: event#KnxRx_Val[slot]
where [slot] is any of the 5 slots on the KNX Menu
example: rule on event#KnxRx_Val1 do VAR1 %value% endon
* Added Events to trigger rules when received read requests from KNX
usage on rules as: event#KnxRx_Req[slot]
where [slot] is any of the 5 slots on the KNX Menu
example: rule on event#KnxRx_Req1 do KnxTx_Val1 35 endon
* Added Slots on the KNX Web Menu to select Group Addess to receive data to trigger rules
5.14.0a
* Add KNX energy data (#2750)
* Fix display selection of
un-available GPIO options in Module Configuration webpage (#2718)
* Fix
IRSend not accepting data value of 0 (#2751)
Add control by KNX for all Tasmota Outputs
Before this commit, only Relays were able to be controlled by KNX. Now all Outputs can be controlled using KNX.
Adrian Scillato
Theo Arends
andrethomas
Theo Arends
Adrian Scillato