9a88677122
More AS608 bling bling
...
More AS608 bling bling (#18163 )
2023-05-22 12:42:24 +02:00
80afc8793f
AdafruitFingerprint library from v2.0.4 to v2.1.0
...
AdafruitFingerprint library from v2.0.4 to v2.1.0 (#18163 )
2023-05-22 11:48:03 +02:00
22abc8ad99
Fix ESP32 InfluxDb initial connection delays
...
Fix ESP32 InfluxDb initial connection delays using HTTPClient (#18015 )
2023-05-21 16:21:43 +02:00
ae518424bc
Add IPv4 DNS lookup to influxdb
...
- Add IPv4 DNS lookup to influxdb (#18015 )
- Add response to influxdb send
2023-05-21 15:34:36 +02:00
a76ebaae48
Shutter continuous improvement ( #18701 )
...
* Update xdrv_27_esp32_shutter.ino
* Update xdrv_27_shutter.ino
* Update xdrv_01_9_webserver.ino
* Update xdrv_12_discovery.ino
* shutterinvert
removed slider display to driver
fix wrong invert display
* codereduction+refactor slider
removed webui slider into driver
optimized code
* update slide, fix invert shutters
- refactor sliders into driver
- fix percent calculation on iverted shutters
* fix on realpercent if inverted shutter
* fix ShutterPercentToRealPosition
fix on inverted shutter
* added shutter to bootloop reset
* bugfix integration
* bugfix
2023-05-21 12:25:11 +02:00
d5ad79985b
haas: sync shutter discovery and fix for more than 4 shutter ( #18694 )
...
* discovery: hoist shutter computation out of loop
* haas: sync shutter discovery and fix for more than 4 shutter
2023-05-20 09:06:56 +02:00
63a83c7289
Added quirks file for Tuya_ZG-204ZL ( #18693 )
2023-05-20 07:51:46 +02:00
f5d6578fb5
Fix correct JSON display of WifiPower float
2023-05-19 17:41:18 +02:00
4afcdc11d6
Simplify Berry Mute option
2023-05-19 16:30:48 +02:00
77103baa0a
Add internal support for max log level
2023-05-19 15:20:21 +02:00
043ea2986b
Berry `tasmota.wifi()` would wrongly report wifi as up ( #18687 )
...
* Berry `tasmota.wifi()` would wrongly report wifi as up
* Fix ESP8266 compile
* Fix display of IP in wifiman
* Improve wifiman IP handling for IPv6
2023-05-18 11:23:09 +02:00
2b76e8e668
HASPmota `meta` attribute and improved `berry_run` ( #18685 )
2023-05-17 21:40:05 +02:00
4a7e4f9a17
Refactor dynamic wifi tx power
2023-05-17 11:44:14 +02:00
57f85ae478
Optimize dynamic WiFi power
2023-05-17 10:45:00 +02:00
4d131fd543
zero-cross dimmer cleanup ( #18674 )
...
removed zero cross dimmer initialize
2023-05-17 08:54:22 +02:00
adff41f962
bugfix ( #18673 )
2023-05-16 22:34:07 +02:00
0385204ca7
Add command ``WifiPower 0``
...
Add command ``WifiPower 0`` to enable dynamic wifi power based on RSSI by @TD-er (#15443 )
2023-05-16 18:55:55 +02:00
f8b26a90f6
Add mutex to many camera functions. ( #18655 )
...
* Add mutex to many camera functions.
* Allow stream to continue after wcinit command (and other commands which reconfigure).
* Adust retries on camera init, specifically log success if it retried.
Shorten messages to save rom.
I have seen fail of 0x103 and 0x20002 succeed on second try.
2023-05-16 12:21:25 +02:00
81d7785f66
LED PWM ac_dimmer curve was wrongly applied instead of Gamma ( #18666 )
2023-05-15 22:51:14 +02:00
98bfc172c1
Zigbee support for air sensors ( #18665 )
...
* Zigbee support for air sensors
* ppm
2023-05-15 22:04:13 +02:00
9b8f3b6b4c
Add command I2CScan0
...
Add command I2CScan0 to scan both busses if available
2023-05-14 15:21:19 +02:00
f1a9a0b45b
Add support for PCA9557
...
Add support for PCA9557 8-bit I/O expander (#18632 )
2023-05-14 15:08:09 +02:00
26508e55fc
Merge branch 'development' of https://github.com/arendst/Tasmota into development
2023-05-14 14:42:23 +02:00
7cad4f95b6
Enable I2c on webcam
2023-05-14 14:42:11 +02:00
885737a1fd
Add support for PCA9557 8-bit IO expander ( #18632 )
...
* add PCA9557 driver
* text correction
* added switches and buttons
* update max devices to 8
* cleanup
2023-05-14 14:19:39 +02:00
f860722eba
Added Endianess Parameter ( #18650 )
...
https://github.com/arendst/Tasmota/discussions/18244
Co-authored-by: JeroenSt <nospam@nospam.org>
2023-05-14 14:18:45 +02:00
0bf27e70fe
fix logic when init cam was successful ( #18653 )
2023-05-14 14:08:53 +02:00
86979646ff
Energy power delta report delayed
...
Energy power delta report delayed by two seconds allowing hardware to stabilize (#17751 )
2023-05-11 18:10:52 +02:00
79a826a206
Update xdrv_81_esp32_webcam.ino ( #18637 )
2023-05-11 09:28:33 +02:00
3a6cd9b63c
start modus tcp bridge automatically ( #18634 )
...
* added default port for modbus tcp bridge to start automatically
* updated ifdef style
* renamed define for modbus default port
2023-05-10 14:38:52 +02:00
3c951d7751
fix GT911 crash in LVGL firmware ( #18633 )
...
* fix GT911 crash
* remove wrong frag when using GT911
2023-05-10 14:02:51 +02:00
64e844d387
Disable crashing GT911 driver ( #18631 )
2023-05-10 11:28:59 +02:00
632176765d
Added define to adjust calibration precision. ( #18613 )
...
Co-authored-by: JeroenSt <nospam@nospam.org>
2023-05-10 09:38:27 +02:00
bef49b4617
Update polish language ( #18615 )
2023-05-10 09:36:54 +02:00
6a7b2b0c6e
IR: Extended the A/C protocol with Command/iFeel/SensorTemp ( #18612 )
...
* IR: Added support for new A/C protocol fields
New fields introduced in IRremoteESP8266 v2.8.5:
1. Command (one of: [Control | Config | iFeel | Timer], default: Control) - allows to set IR command type (e.g. iFeel for no-beep ambient sensor report)
2. iFeel (boolean, default: false) - configures whether iFeel (ambient sensor temp. is used by the A/C unit)
3. SensorTemp - the ambient sensor temperature reading to send
Note:
- Fan setting via int is now 6-value (breaking change -> 6 is the new max)
* IR A/C: Model now pretty-printed to JSON
Model string is the default (falls back to int if n/a)
* IR A/C: Added separate JSON resp. per command type
* No change for "kControlCommand" (default/legacy).
* SensorReport/Timer/Config commands only contain relevant JSON nodes
Additionally:
Clock has time semantics (input: minutes, output: HH:MM), except for "config" mode,
where state.clock is used as ConfigKey and state.sleep is used as ConfigValue.
---------
Co-authored-by: Mateusz Bronk <2566147+mbronk@users.noreply.github.com>
2023-05-09 21:35:56 +02:00
be27b4c488
Update de_DE.h ( #18621 )
2023-05-09 20:12:24 +02:00
6fe1bbd617
Update changelogs
2023-05-08 15:10:15 +02:00
45eb82bc3f
Fix for not sending changes to mqtt ( #18600 )
...
Co-authored-by: JeroenSt <nospam@nospam.org>
2023-05-08 09:59:28 +02:00
6cb92ffe49
Fix for aligment at displayfloat command ( #18601 )
...
* Fix for wrong aligment at displayfloat command
* Added alignment parameter to prevent regression
---------
Co-authored-by: JeroenSt <nospam@nospam.org>
2023-05-08 09:58:26 +02:00
cdc6ba7c96
Update italian language ( #18605 )
2023-05-08 09:57:13 +02:00
cf60e34578
fix webcam init for some cases ( #18606 )
...
Co-authored-by: Christian Baars <christianbaars@MacBook-Pro-von-Christian.local>
2023-05-08 09:57:00 +02:00
da5396a080
Add filesystem size to esp8266 GUI
2023-05-07 17:25:18 +02:00
91523fd90b
Add GM861 optional heartbeat
2023-05-07 16:01:33 +02:00
eccc1af0a2
disable SHT pig on i2c / add missing GT911 defines ( #18595 )
...
* disable SHT pig on i2c / add missing GT911
* GT911 missing in config
2023-05-07 15:32:15 +02:00
a46b926530
fix i2c touch init ( #18594 )
2023-05-07 14:48:49 +02:00
0287291cd9
Add GM861 optional AIMId decode
2023-05-07 14:11:29 +02:00
e9d1e8c725
Change command FileUpload binary index
2023-05-06 18:09:11 +02:00
b9464a21a8
GM861 add support for AIM
2023-05-06 17:18:52 +02:00
25e55ae073
#18548 fix shuttersetup ( #18586 )
...
- code optimization
- shuttersetup reluctant on relay to energy measure relation
2023-05-06 15:46:29 +02:00
8b2539a35a
Partition_Manager.tapp fixed ( #18588 )
2023-05-06 12:18:12 +02:00
d7b6d72e19
Add support for GM861
...
- Add support for GM861 1D and 2D bar code reader (#18399 )
- Bump version to v12.5.0.2
2023-05-05 16:50:19 +02:00
069278f966
Berry add `tcpclientasync` class for non-blocking TCP client ( #18584 )
2023-05-05 15:13:22 +02:00
687b26ad13
Scripter update ( #18578 )
...
* add ds2480b library
* add onewire support
* reset on error
* call to get esp32 HWS
* DS2480 serial invert option
2023-05-05 09:17:17 +02:00
c26ec44407
Matter POC for remote Relay ( #18575 )
2023-05-03 23:03:01 +02:00
9097f508fd
BugFix Garage + new shutterbuttons options ( #18572 )
...
* Fix GarageMode movements
* BugFix Garage + new shutterbuttons options
- Removed logging
- shutterbuttons support incremental change
- garage mode, fix #18539 and fix #18442
2023-05-03 21:44:09 +02:00
3fa42072b1
Fix HASPmota demo for the new Berry rule engine ( #18570 )
2023-05-03 17:33:21 +02:00
c498995f79
Update xdrv_68_zerocrossDimmer.ino ( #18556 )
...
* Update xdrv_68_zerocrossDimmer.ino
* Address IRAM issue report
removed some IRAM from ESP8266. Further improvement to ESP32 as soon as measurement is available.
2023-05-02 15:53:17 +02:00
cda2bf157d
Add support for TC74
...
Add support for TC74 temperature sensor by Michael Loftis (#18042 )
2023-05-01 16:26:07 +02:00
616652ea22
Added support for Dingtian Relay Board v3.6.10 ( #18535 )
...
* Added support for Dingtian Relay Board v3.6.10
* Output OE was never initialized
* Removed white spaces trying to fix language builds
* Fix for https://github.com/arendst/Tasmota/pull/18535#pullrequestreview-1406978097
* Fixed language builds
---------
Co-authored-by: JeroenSt <nospam@nospam.org>
2023-05-01 14:51:02 +02:00
c5612a50fb
Fix for https://github.com/arendst/Tasmota/discussions/15703#discussioncomment-5713294 ( #18534 )
...
Added and fixed comments
Co-authored-by: JeroenSt <nospam@nospam.org>
2023-04-29 14:46:38 +02:00
1d0c19311d
Add support for WT32_SC01 Plus display ( #18538 )
2023-04-29 14:45:10 +02:00
17d1d7f5fa
Update xdrv_68_zerocrossDimmer.ino ( #18532 )
2023-04-28 17:33:12 +02:00
d206de52f1
Italian language update ( #18531 )
2023-04-28 08:38:46 +02:00
f86bc7d8ab
Prep GM861
2023-04-27 17:44:33 +02:00
53bd49ddcd
Remove USE_ARDUINO_OTA from ESP32
2023-04-27 16:35:47 +02:00
c33472d9b6
ArduinoOTA support only ESP8266 ( #18528 )
...
* ArduinoOTA support only ESP8266
* add comment ArduinoOTA
2023-04-27 14:19:27 +02:00
60855bf367
Enabled ZCDimmerSet for ESP8266 ( #18518 )
...
* Enabled ZCDimmerSet for ESP8266
- Increased interrupts time to get stablity. Savedata issue is gone.
- Increased accuracy to trigger an on sinus curve.
- Enabled high resolution trigger ZCDimmerSet for ESP8266
* Update xdrv_68_zerocrossDimmer.ino
2023-04-27 08:03:00 +02:00
6702321784
Matter shutter with tilt ( #18525 )
2023-04-26 22:53:26 +02:00
ee9d086aba
Solved: ModbusBridge reading int16 returns uint16 ( #18524 )
...
https://github.com/arendst/Tasmota/issues/18522
Co-authored-by: JeroenSt <nospam@nospam.org>
2023-04-26 22:27:53 +02:00
afbdb3d54f
Added TILTCONFIG to status13 message for MATTER support ( #18512 )
2023-04-26 11:39:59 +02:00
bec24baa75
Changes JSON message to actual position and not outdated ( #18502 )
...
* Report actual position in JSON
* Update xdrv_27_shutter.ino
* Update xdrv_27_esp32_shutter.ino
* copy&paste error
2023-04-26 08:39:49 +02:00
f6763eb37b
Berry: add BLE server/advertiser ( #18494 )
2023-04-26 08:39:29 +02:00
39abde2583
Worked on ESP32 dimmer with Zero cross ( #18481 )
...
* Worked on ESP32 dimmer with Zero cross
Until now the ESP32 does not support zero-cross dimmer. I take a sneak how they did in in ESPhome and adapted the approach to TASMOTA. At the end it works that smooth that likely i will change ESP8266 either so we have a common code. Currently ESP8266 is not touched.
There is a minor issue with savedata == default. When changing the dimmer value the interrupts get stopped during write of the config data to flash.
* ESP8266 Dimmer added
Worked all so well and the code is much smaller. There is no need for reconfiguration on existing users. But there are settings not needed anymore. Will work on the documentation. Anyhow existing installations can upgrade without hickup
* Optimized endpoints at dimmer 0 and 100
* Removed debug stuff
* Fix Issue at dimmer = 0
* Small bugfix
* Final checked Version
* Update xsns_01_counter.ino
* Add missing func
* Update xsns_01_counter.ino
* Moved out of the house of counter and build my own one
* New ZeroCross Driver
* Update xdrv_91_zerocrossDimmer.ino
* evolving
* Delete xdrv_91_zerocrossDimmer.ino
* Add files via upload
* Changed drv number from 1 to 68
* Commit to merge
2023-04-25 13:46:19 +02:00
98cad1a192
Create ST7735S_Air101-LCD_display.ini
2023-04-24 16:53:37 +02:00
c1db67ce37
Refactor GDK101 driver
2023-04-23 18:09:33 +02:00
21bb822dec
Fix for ModuleAddress command ( #18490 )
2023-04-23 10:51:00 +02:00
799ba675eb
add xpt2046 option for spi bus 2 ( #18480 )
...
* allow spi bus 2
* xpt spi bus 2
* xpt option bus
* xpt option spi bus 2
* exclude c3
* exclude s2
* fix s3
* typo
2023-04-23 10:19:31 +02:00
5a2266289e
Update Sievert
2023-04-21 16:55:09 +02:00
11a43ea99b
Tasmota Core 208 ( #18460 )
...
* Tasmota Core 2.0.8
* Fix Linker errors
2023-04-20 20:01:35 +02:00
b235dffb29
Fix Berry hue_bridge ( #18459 )
2023-04-19 23:45:05 +02:00
9f77cfd890
Fix single pin latching relay power on state
...
Fix single pin latching relay power on state (#18386 )
2023-04-19 16:17:04 +02:00
eb40496e4b
Update xsns_20_novasds.ino ( #18444 )
2023-04-18 17:20:47 +02:00
6f6c43a724
Add command ``SetOption152 0/1``
...
Add command ``SetOption152 0/1`` to select two (default) or one pin bistable relay control (#18386 )
2023-04-18 17:16:29 +02:00
2684141722
Fix ESP8266 Energy Export Active
...
Fix ESP8266 Energy Export Active no update regression from v12.3.1.3
2023-04-18 15:34:19 +02:00
05f6bcf211
Bump v12.5.0.1
2023-04-17 10:10:55 +02:00
e2e142f289
Zigbee fix compilation for future core ( #18432 )
...
* Zigbee fix compilation for future core
* More fixes for ESP32
2023-04-16 23:16:28 +02:00
96f6f69f13
Increase TasmotaClient receive buffer
...
Increase TasmotaClient receive buffer from 100 to 250 (#18427 )
2023-04-16 14:39:29 +02:00
e158b181d6
Add SDM72D_M config
2023-04-16 13:52:10 +02:00
2a8b859e37
Added I2SRtttl command ( #18423 )
2023-04-16 12:04:22 +02:00
1e571e1d14
Update templates
2023-04-15 14:58:21 +02:00
ae5dd61b8a
Update Italian language ( #18415 )
2023-04-15 12:16:54 +02:00
c2a6dd81e8
Fix ESP32 energy monitoring set StartTotalTime
...
Fix ESP32 energy monitoring set StartTotalTime regression from v12.3.1.5 (#18385 )
2023-04-14 17:42:31 +02:00
e07efd625f
Add support for GDK101 gamma radiation sensor by Petr Novacek ( #18390 )
2023-04-14 16:50:54 +02:00
4fdd1ad94d
Ftlab gdk101 Gamma Radiation Sensor Module support ( #18390 )
...
* Support for GDK101.
* GDK101 driver rework
---------
Co-authored-by: PetrNovacek <39201428+r21m@users.noreply.github.com>
2023-04-14 15:29:00 +02:00
d88d42341d
Fix future compile error
2023-04-14 12:01:47 +02:00
3da96a55d5
Fixes and enhancements autosetup from testbench ( #18405 )
2023-04-13 21:56:35 +02:00
870874d181
fix display of adcparam param4 for ct ( #18397 )
2023-04-13 09:04:17 +02:00
6d9beb5d79
autosetup of shutters for shelly devices ( #18393 )
...
* New autocallibration and setup for shelly devices
* setup command
2023-04-12 09:39:48 +02:00
1c0936c6d5
fix setting migration issue ( #18383 )
...
* fix setting migration issue
* next try to fix migration issue
@arendst: I saw you made also some changes to the xdrv122. I copied this and it looks like setting the crc32 was the root of the issue. You removed it and I do the same now. Looks much better.
2023-04-11 08:17:55 +02:00
6007f2d970
Berry `webserver.html_escape()` reusing the internal HTML escaping function ( #18381 )
2023-04-10 19:16:01 +02:00
Theo Arends
stefanbode
Bernhard Urban-Forster
Ian Anderson
s-hadinger
btsimonh
CCTweaker
Jeroen
Jason2866
Christian Baars
f-reiling
TID
Mateusz Bronk
SteWers
bovirus
gemu
Tim L
Felix Laevsky
InHi66
ferix98
Szewcson
Barbudor