070843200f
Add IR Raw data control
...
* Add command SetOption58 0/1 to enable IR raw data info in JSON message (#2116 )
* Add command IRSend <frequency>|0,<rawdata1>,<rawdata2>,.. to allow raw data transmission (#2116 )
2018-11-21 16:36:10 +01:00
23c16e58a9
Housekeeping
...
Housekeeping
2018-11-20 15:00:24 +01:00
76829d4ced
6.3.0.11 Add delays
...
6.3.0.11 20181120
* Add delays removed in 6.3.0.9 (#4233 )
* Allow user definition of defines WIFI_RSSI_THRESHOLD (default 10) and WIFI_RESCAN_MINUTES (default 44)
* Add support for Fujitsu HVac and IrRemote (#4387 )
2018-11-20 14:10:32 +01:00
5ee6922da9
Fix wifi re-scan connection baseline
...
Fix wifi re-scan connection baseline
2018-11-20 12:03:42 +01:00
c502f0934f
Add command SetOption57
...
* Add command SetOption57 0/1 to enable wifi network re-scan every 44 minutes with a rssi threshold of 10 to select highest RSSI (#3173 )
* Fix MQTT connection error after restart
2018-11-19 23:06:42 +01:00
e34a1f0719
Add wifi network scan
...
* Add command SetOption56 0/1 to enable wifi network scan and select highest RSSI (#3173 )
2018-11-19 18:07:25 +01:00
809ae966df
Update _changelog.ino
2018-11-18 20:03:59 +02:00
4899178362
6.3.0.10 Add command SetOption36
...
6.3.0.10 20181118
* Add command SetOption36 0..255 milliseconds (10 default) to tune main loop dynamic delay
2018-11-18 16:49:02 +01:00
18997e841f
6.3.0.9 Add dynamic delay in loop
...
6.3.0.9 20181118
* Moved command SetSensorXX to debugging driver freeing user code space
* Add dynamic delay to main loop providing time for wifi background tasks
* Remove delays introduced in 6.3.0.1 (#4233 )
2018-11-18 15:02:52 +01:00
e284e78b4d
Add support for Armtronix dimmers
...
Add support for Armtronix dimmers. See wiki for info (#4321 )
2018-11-16 12:22:15 +01:00
9eacabc4f0
Delay initial flash write
...
* Stop enforcing flashmode dout but it is still mandatory
* Moved bootcount update (being first) flash write to 10 seconds after restart
2018-11-16 09:36:41 +01:00
877771c90a
6.3.0.8 Stop enforcing dout
...
6.3.0.8 20181115
* Stop enforcing flashmode dout. Still mandatory but this a chk for possible future flash corruption
2018-11-15 14:55:45 +01:00
3ef78e8095
Revert "Moved command SetSensorXX"
...
This reverts commit 830319bc6e
2018-11-12 15:54:18 +01:00
830319bc6e
Moved command SetSensorXX
...
Moved command SetSensorXX to debugging
2018-11-12 15:09:09 +01:00
e2dd11b0bc
Consolidate LTrim into Trim
...
Consolidate LTrim into Trim
2018-11-12 12:33:49 +01:00
d3f5c8978b
Update command WebSend
...
* Change command WebSend Host header field from IP address to hostname (#4331 )
* Add to command WebSend option to send a direct path when command starts with a slash (#4329 )
2018-11-12 11:13:05 +01:00
406907cbe2
Revert "Update command WebSend"
...
This reverts commit 59c5817214
2018-11-12 11:11:22 +01:00
59c5817214
Update command WebSend
...
* Change command WebSend Host header field from IP address to hostname (#4331 )
* Add to command WebSend option to send a direct path when command starts with a slash (#4329 )
2018-11-12 11:10:55 +01:00
41aafe05ae
Change command WebSend
...
Change command WebSend Host header field from IP address to hostname (#4331 )
2018-11-12 10:20:30 +01:00
c0cfdde8ac
Fix Sonoff Pow R2 and Sonoff S31
...
Fix Sonoff Pow R2 and Sonoff S31 Serial interface hang caused by Sonoff Basic R2 driver delay implementation (and possibly core bug)
2018-11-11 17:58:18 +01:00
0868c72140
Fix Sonoff Pow R2 and Sonoff S31
...
Fix Sonoff Pow R2 and Sonoff S31 Serial interface hang caused by MP3 driver
2018-11-11 16:52:09 +01:00
a55ec91a10
6.3.0.7 Use ESP.reset
...
6.3.0.7 20181111
* Fix wifi connection errors using ESP.reset instead of ESP.restart
2018-11-11 14:28:46 +01:00
e76f862b8f
Add info
...
Add info
2018-11-11 13:39:24 +01:00
9872f942ae
6.3.0.6 Change GUI page load
...
6.3.0.6 20181110
* Change GUI Configure Module by using AJAX for data fetch to cut page size (and memory use) by 40%
2018-11-10 15:10:58 +01:00
7a235cc8ef
Fix shelly2 ghost switching
...
Fix shelly2 ghost switching caused by lack of pull-up inputs (#4255 )
2018-11-10 10:48:28 +01:00
b5d38c4eee
Add support for Gosund SP1 v2.3
...
Add support for Gosund SP1 v2.3 Power Socket with Energy Monitoring (#4297 )
2018-11-08 10:24:10 +01:00
c75ae78d88
6.3.0.5 Add code image
...
6.3.0.5 20181107
* Add code image and optional commit number to version
2018-11-07 15:03:41 +01:00
15148f290d
6.3.0.4 Add SetSensorXX
...
6.3.0.4 20181106
* Add command SetSensorXX 0/1 to disable/re-enable compiled xsns_XX_sensor.ino driver
2018-11-06 17:33:51 +01:00
49acf4a7d3
Add optional hardware serial
...
* Add optional hardware serial when GPIO13(Rx) and GPIO15(Tx) are selected removing hardware serial from GPIO01(Tx) and GPIO03(Rx) (#4288 )
* Bump TasmotaSerial version from 2.1.0 to 2.2.0
2018-11-06 11:27:19 +01:00
c9cf375c6c
Add checks for GPIO selections
...
Add more strict checks for GPIO selections
2018-11-05 17:27:02 +01:00
7418bb9b3d
6.3.0.3 Swap Tx/Rx hardware serial
...
6.3.0.3 20181105
* Fix hardware serial pin configuration. To keep using hardware serial swap current Rx/Tx pin configuration only (#4280 )
2018-11-05 10:26:06 +01:00
14a7424e9b
Add command SetOption24
...
Add command SetOption24 0/1 to select pressure unit as hPa or mmHg (#4241 )
2018-11-04 16:55:12 +01:00
eb4f1173d3
6.3.0.2 Add Timezone minutes
...
6.3.0.2 20181101
* Add minutes to commands Timezone to allow all possible world timezones
2018-11-01 14:24:10 +01:00
46a0a0afba
Add minutes to commands Timezone
...
Add minutes to commands Timezone to allow all possible world timezones
2018-11-01 13:00:05 +01:00
7d4312f346
Fix unintended function overload
...
Fix unintended function overload of WifiState
2018-10-31 11:27:40 +01:00
cb4c2764fd
6.3.0.1 Tuya and sonoff-basic changes
...
6.3.0.1 20181031
* Add wifi status to Tuya (#4221 )
* Add default sleep 1 to sonoff-basic to lower enrgy consumption (#4217 )
2018-10-31 11:22:18 +01:00
332b657e77
6.3.0 Released
...
6.3.0 Released
2018-10-30 18:15:31 +01:00
e6a8b2d30d
Add TotalStartTime to Energy JSON
...
Add TotalStartTime to Energy JSON message (#3971 )
2018-10-30 17:04:19 +01:00
9d981d83e4
Add support for two BMP/BME
...
Add support for two BMP/BME sensors (#4195 )
2018-10-29 15:46:03 +01:00
6b86c473d9
Add token %hostname%
...
Add token %hostname% to command FullTopic (#3018 )
2018-10-29 12:38:44 +01:00
cc56677ba3
Add Gui Hostname display
...
Add command SetOption53 0/1 to toggle gui display of Hostname and IP address
2018-10-29 12:21:27 +01:00
5c78561b07
6.2.1.20 Add mDNS delay option
...
6.2.1.20 20181028
* Add command SetOption35 0..255 (seconds) to delay mDNS initialization to control possible Wifi connect problems
2018-10-28 17:57:25 +01:00
4f59d102e7
Add sonoff-basic.bin
...
Add sonoff-basic.bin without most sensors
2018-10-27 17:15:52 +02:00
53e1420961
Change OTA Url
...
* Change default OTA Url to http://thehackbox.org/tasmota/release/sonoff.bin (#4170 )
* Add Tuya Software Serial to support additional Tuya configurations (#4178 )
2018-10-27 11:37:42 +02:00
f2b04092f8
Initial release of RF transceiving
...
Initial release of RF transceiving using library RcSwitch (#2702 )
2018-10-25 18:17:58 +02:00
f58f3c2d31
Fix rule mqtt#connected trigger
...
Fix rule mqtt#connected trigger when mqtt is disabled (#4149 )
2018-10-25 14:16:46 +02:00
eefad54be7
Fix invalid JSON
...
Fix invalid JSON floating point result from nan (Not a Number) and inf (Infinity) into null (#4147 )
2018-10-25 14:03:34 +02:00
51ee22273b
Fix invalid JSON
...
Fix invalid JSON floating point result from nan into null (#4147 )
2018-10-25 10:44:59 +02:00
2c02532e1c
6.2.1.19 Rename user_config.h
...
6.2.1.19 20181023
* Fix header file execution order by renaming user_config.h to my_user_config.h
* Fix Arduino IDE compilation warning regarding e-paper library
2018-10-23 15:51:51 +02:00
a7c912111c
Resize HX711 weight_item field
...
Resize HX711 weight_item field from 16 bit to 32 bit
2018-10-21 17:54:51 +02:00
Theo Arends
andrethomas2