4899178362
6.3.0.10 Add command SetOption36
...
6.3.0.10 20181118
* Add command SetOption36 0..255 milliseconds (10 default) to tune main loop dynamic delay
2018-11-18 16:49:02 +01:00
18997e841f
6.3.0.9 Add dynamic delay in loop
...
6.3.0.9 20181118
* Moved command SetSensorXX to debugging driver freeing user code space
* Add dynamic delay to main loop providing time for wifi background tasks
* Remove delays introduced in 6.3.0.1 (#4233 )
2018-11-18 15:02:52 +01:00
877771c90a
6.3.0.8 Stop enforcing dout
...
6.3.0.8 20181115
* Stop enforcing flashmode dout. Still mandatory but this a chk for possible future flash corruption
2018-11-15 14:55:45 +01:00
a55ec91a10
6.3.0.7 Use ESP.reset
...
6.3.0.7 20181111
* Fix wifi connection errors using ESP.reset instead of ESP.restart
2018-11-11 14:28:46 +01:00
9872f942ae
6.3.0.6 Change GUI page load
...
6.3.0.6 20181110
* Change GUI Configure Module by using AJAX for data fetch to cut page size (and memory use) by 40%
2018-11-10 15:10:58 +01:00
c75ae78d88
6.3.0.5 Add code image
...
6.3.0.5 20181107
* Add code image and optional commit number to version
2018-11-07 15:03:41 +01:00
15148f290d
6.3.0.4 Add SetSensorXX
...
6.3.0.4 20181106
* Add command SetSensorXX 0/1 to disable/re-enable compiled xsns_XX_sensor.ino driver
2018-11-06 17:33:51 +01:00
7418bb9b3d
6.3.0.3 Swap Tx/Rx hardware serial
...
6.3.0.3 20181105
* Fix hardware serial pin configuration. To keep using hardware serial swap current Rx/Tx pin configuration only (#4280 )
2018-11-05 10:26:06 +01:00
eb4f1173d3
6.3.0.2 Add Timezone minutes
...
6.3.0.2 20181101
* Add minutes to commands Timezone to allow all possible world timezones
2018-11-01 14:24:10 +01:00
cb4c2764fd
6.3.0.1 Tuya and sonoff-basic changes
...
6.3.0.1 20181031
* Add wifi status to Tuya (#4221 )
* Add default sleep 1 to sonoff-basic to lower enrgy consumption (#4217 )
2018-10-31 11:22:18 +01:00
332b657e77
6.3.0 Released
...
6.3.0 Released
2018-10-30 18:15:31 +01:00
5c78561b07
6.2.1.20 Add mDNS delay option
...
6.2.1.20 20181028
* Add command SetOption35 0..255 (seconds) to delay mDNS initialization to control possible Wifi connect problems
2018-10-28 17:57:25 +01:00
6119c43610
Fix version
2018-10-28 16:16:18 +01:00
613ffde5c0
6.2.1.18 Add API.md
...
6.2.1.18 20181019
* Add more API callbacks and document API.md
2018-10-19 12:53:22 +02:00
0ab43909c3
6.2.1.17 Changes and Adds
...
6.2.1.17 20181017
* Enable updated non-blocking PubSubClient as default MQTT client
* Update TasmotaModbus and TasmotaSerial libraries for support of serial 8N2 communication
* Add support for Pzem-003/017 DC Energy monitoring module (#3694 )
* Change support for Pzem-014/016 AC Energy monitoring module (#3694 )
2018-10-17 12:27:05 +02:00
fb6cc194a9
6.2.1.16 Add TasmotaModbus lib
...
6.2.1.16 20181015
* Add TasmotaModbus library for very basic modbus wrapper for TasmotaSerial
* Change xsns_17_senseair.ino to use TasmotaModbus library
* Fix xnrg_05_pzem2.ino for PZEM-014/016 support using TasmotaModbus library (#3694 )
2018-10-15 17:18:30 +02:00
fe26768103
6.2.1.15 Fix Color Temperature slider
...
6.2.1.15 20181012
* Fix Color Temperature slider functionality regression from 20180726 (#4037 )
* Add auto reload of main web page to some web restarts
2018-10-12 11:42:52 +02:00
b3039de1b6
6.2.1.14 Rewrite Webserver
...
6.2.1.14 20181010
* Rewrite Webserver page handler for easier extension (thx to Adrian Scillato)
2018-10-10 22:21:44 +02:00
633a45f964
Revert "6.2.1.14 Webserver rewrite"
...
This reverts commit 077b8a79e1
2018-10-10 19:41:08 +02:00
077b8a79e1
6.2.1.14 Webserver rewrite
...
6.2.1.14 20181010
* Rewrite Webserver page handler for easier extension (thx to Adrian Scillato)
2018-10-10 16:40:54 +02:00
30154e2335
6.2.1.13 Change to ArduinoMqtt
...
6.2.1.13 20181008
* Change default Mqtt client library from PubSubClient to non-blocking ArduinoMqtt by Joel Gaehwiler
2018-10-08 10:30:24 +02:00
5bbec2617f
6.2.1.12 - Fixes Shelly1 and CSL
...
6.2.1.12 20181007
* Fix Shelly1 switchmode 3 and 4 when using pushbutton (#3989 )
* Add support for CSL Aplic WDP 303075 Power Socket with Energy Monitoring (#3991 , #3996 )
2018-10-07 12:37:03 +02:00
0ad250c10b
6.2.1.11 Add MQTT Client
...
6.2.1.11 20191002
* Remove support for MQTT Client based on esp-mqtt-arduino by #define MQTT_LIBRARY_TYPE MQTT_ESPMQTTARDUINO
* Add support for MQTT Client based on lwmqtt to be selected by #define MQTT_LIBRARY_TYPE MQTT_ARDUINOMQTT
2018-10-02 17:07:30 +02:00
87dc6fe20e
Add basic support for color calibration
2018-09-29 16:55:53 +02:00
4b7c797fb7
6.2.1.9 Apparent/Reactive Power
...
6.2.1.9 20180928
* Add Apparent Power and Reactive Power to Energy Monitoring devices (#251 )
2018-09-28 15:48:42 +02:00
bac33345a0
6.2.1.8 Extent status JSON
...
6.2.1.8 20180926
* Change status JSON message providing more switch and retain information
2018-09-26 10:13:44 +02:00
2029440fae
6.2.1.7 Fix NTPserver change
...
6.2.1.7 20180925
* Remove restart after ntpserver change and force NTP re-sync (#3890 )
* Release full Shelly2 support
2018-09-25 11:35:37 +02:00
7a767f104c
6.2.1.6 Remove some commands
...
6.2.1.6 20180922
* Removed commands PowerCal, VoltageCal and CurrentCal as more functionality is provided by commands PowerSet, VoltageSet and CurrentSet
* Allow decimals as input to commands PowerSet, VoltageSet and CurrentSet
* Add support for PCA9685 12bit 16pin hardware PWM driver (#3866 )
2018-09-22 15:09:53 +02:00
415ed97dab
6.2.1.5 Add web authentication
...
Add authentication to HTTP web pages
2018-09-21 11:15:42 +02:00
bf7dcb8eec
6.2.1.3 Add SerialSend5
...
6.2.1.4 20180916
* Add command SerialSend5 to send raw serial data like "A5074100545293"
* Update MCP230xx driver
* Update Czech translation
* Update MP3 driver (#3800 )
* Add userid/password option to decode-status.py (#3796 )
* Fix syslog when emulation is selected (#2109 , #3784 )
* Fix Pzem2 compilation error (#3766 , #3767 )
2018-09-16 16:09:00 +02:00
7cd9224819
6.2.1.3 - Change drop down list
...
6.2.1.3 20180907
* Change web Configure Module GPIO drop down list order for better readability
* Fix showing Period Power in energy threshold messages
* Fix ButtonRetain to not use default topic for clearing retain messages (#3737 )
2018-09-08 17:18:31 +02:00
359877489d
6.2.1.2 - Fix KNX PA exception
...
6.2.1.2 20180906
* Fix KNX PA exception. Regression from 6.2.1 buffer overflow (#3700 , #3710 )
2018-09-06 10:42:22 +02:00
eaff296262
v6.2.1.1 - Released v6.2.1
...
Released v6.2.1 to solve important issues
2018-09-05 11:22:58 +02:00
07dafe1631
6.2.0.2 - Energy monitoring
...
6.2.0.2 20180904
* Rewrite energy monitoring using energy sensor driver modules
* Fix lost today and total energy value after power cycle (#3689 )
2018-09-04 16:22:34 +02:00
48b5f9117a
6.2.0.1 - Fix StateText ambiguity
...
Fix possible ambiguity on command parameters if StateText contains numbers only (#3656 )
2018-09-02 11:11:49 +02:00
2e8864effd
6.2.0 - Released
2018-08-31 16:53:40 +02:00
f7c38f24f3
6.1.1.14 Add boot loop detection
...
Add boot loop detection and try to fix
2018-08-30 14:27:33 +02:00
3abdaaffb7
Revert "6.1.1.14 Add boot loop detection"
...
This reverts commit b9a875d6fb
2018-08-30 13:19:09 +02:00
b9a875d6fb
6.1.1.14 Add boot loop detection
...
Add boot loop detection and try to fix
2018-08-30 12:22:24 +02:00
19a8113cf4
Revert "Merge branch 'release-6.2' into development"
...
This reverts commit 433dc8d9d16c61cdead7
2018-08-28 18:13:14 +02:00
06604b7f09
Version update
...
Version update
2018-08-28 16:33:05 +02:00
55b43734d8
6.1.1.13 - Fixes
...
6.1.1.13 20180828
* Fix 6.1.1.12 regression of Mem and Var default handling (#3618 )
* Optimizations
2018-08-28 11:10:32 +02:00
d69e88b50b
6.1.1.12 - Add debounce time
...
6.1.1.12 20180827
* Add commands ButtonDebounce 40..1000 and SwitchDebounce 40..1000 to have more control over debounce timing. Default is 50mS (#3594 )
2018-08-27 12:01:20 +02:00
f090050e69
6.1.1.11 - Sleep fixes part 1
...
6.1.1.11 20180826
* Change scheduler phase 1 - Fixed when sleep is enabled: Uptime, Delay, PulseTime and TelePeriod (#3581 )
2018-08-26 15:42:35 +02:00
48668bce7b
6.1.1.10 - Disable core 2.4.2 sleep
...
Disable wifi sleep for both Esp8266/Arduino core 2.4.1 and 2.4.2 to solve device freeze caused by Espressif SDK bug (#3554 )
2018-08-25 11:59:21 +02:00
6a5c0d29e8
6.1.1.9 - Fixes and Additions
...
6.1.1.9
* Allow user override of define MAX_RULE_TIMERS (#3561 )
* Allow user override of define MAX_RULE_VARS
* Add GPIO options ButtonXn, SwitchXn and CounterXn to select INPUT mode instead of INPUT_PULLUP (#2525 )
* Fix OtaMagic when file path contains a dash (-) (#3563 )
2018-08-23 16:05:51 +02:00
bab6ae5644
6.1.1.8 - Fixes and Additions
...
6.1.1.8
* Fix MQTT reconnection detection when using TasmotaMqtt library (#3558 )
* Add build time setting of ButtonTopic and SwitchTopic (#3414 )
* Add display features and dynamic buffering
2018-08-23 11:49:17 +02:00
b12c8d39d5
Add initial display support
...
Add initial display support for Lcd, Oled, Matrix, Tft and e-paper - Need more docs
2018-08-18 18:11:22 +02:00
bb87f99ee0
Fix version numbering
...
Fix version numbering
2018-08-17 11:10:21 +02:00
8a61c25218
6.1.1.6 Add modulo option to rules
...
Add modulo option to rules like rule1 on Time#Minute|5 do backlog power on;delay 200;power off endon (#3466 )
2018-08-13 13:09:22 +02:00
Theo Arends
Erik