Theo Arends
0b10f48e41
6.4.1.1 Fix most compiler warnings
...
6.4.1.1 20181224
* Fix most compiler warnings
2018-12-24 18:14:25 +01:00
Theo Arends
87ddbd8f38
Release 6.4.1
2018-12-24 16:45:41 +01:00
Theo Arends
0539775cf0
Change MQTT GUI password handling
...
Change MQTT GUI password handling (#4723 )
2018-12-24 14:31:34 +01:00
Theo Arends
77c07a2e00
Change FallbackTopic
...
Change FallbackTopic from cmnd/<mqttclient>/ to cmnd/<mqttclient>_fb/ to discriminate from Topic (#1528 )
2018-12-23 14:48:57 +01:00
Theo Arends
ed6e411f7f
Add optional TLS_CA_CERT
...
Add define USE_MQTT_TLS_CA_CERT for checking MQTT TLS against root ca using Let's Encrypt cert from sonoff_letsencrypt.h - not supported with core 2.3.0 (#4703 )
2018-12-22 18:09:27 +01:00
Theo Arends
e2cd656286
6.4.0.3 Hass and Alexa fixes
...
6.4.0.3 20181222
* Change Hass discovery to short MQTT messages as used by Hass 0.81 and up (#4711 )
* Change FallbackTopic detection (#4706 )
* Add define WIFI_SOFT_AP_CHANNEL in my_user_config.h to set Soft Access Point Channel number between 1 and 13 as used by Wifi Manager web GUI (#4673 )
* Fix Alexa "this value is outside the range of the device". Needs power cycle and Alexa deletion/discovery cycle. (#3159 , #4712 )
2018-12-22 16:13:07 +01:00
Theo Arends
c1102a4863
6.4.0.2 Fix possible dtostrf bos
...
6.4.0.2 20181221
* Fix possible dtostrf buffer overflows by increasing buffers
2018-12-21 16:17:06 +01:00
Theo Arends
a80fcd98d7
Fix wifi strongest signal detection
...
Fix wifi strongest signal detection (#4704 )
2018-12-21 13:53:38 +01:00
Theo Arends
ec931fe5fe
Change RAM usage BMP/BME
...
Change RAM usage BMP/BME I2C sensors
2018-12-21 11:36:55 +01:00
andrethomas2
8a7dd3e06d
Add support for AZ-Instrument 7798 CO2
...
Add support for AZ-Instrument 7798 CO2 meter/datalogger
2018-12-19 00:00:19 +02:00
Theo Arends
8792ea48a9
6.4.0.1 New dev release
2018-12-16 16:26:40 +01:00
Theo Arends
f83bcc2b89
Updates for release 6.4.0
...
Updates for release 6.4.0
2018-12-15 17:15:51 +01:00
Theo Arends
fc7c1ac6b7
Updates for release 6.4.0
...
Updates for release 6.4.0
2018-12-15 15:55:51 +01:00
Theo Arends
6d58580446
Updates for release 6.3.0
...
Updates for release 6.3.0
2018-10-30 17:29:01 +01:00
Theo Arends
184346335d
Updates for release 6.3.0
...
Updates for release 6.3.0
2018-10-28 19:07:01 +01:00
Theo Arends
dffbc2c7c3
Updates for release 6.3.0
...
Updates for release 6.3.0
2018-10-27 17:46:44 +02:00
Theo Arends
0017a6304a
Updates for release 6.3.0
...
Updates for release 6.3.0
2018-10-27 13:33:17 +02:00
Theo Arends
c2f9f5ddbe
Updates for release 6.3.0
...
Update for release 6.3.0
2018-10-26 17:13:17 +02:00
Theo Arends
28e3773113
v6.2.1
...
Version 6.2.1 20180905
* Fix possible ambiguity on command parameters if StateText contains numbers only (#3656 )
* Fix Wemo emulation to select the first relay when more than one relay is present (#3657 )
* Fix possible exception due to buffer overflow (#3659 )
* Fix lost energy today and total energy value after power cycle (#3689 )
2018-09-05 10:58:56 +02:00
Theo Arends
45ffd2cdc3
Prep release
2018-08-31 16:39:58 +02:00
Theo Arends
fb6640e94b
Update display drivers
...
Add features to and provide more stable display drivers
2018-08-31 12:17:09 +02:00
Theo Arends
2212af4860
Clear GPIO on multi boot loop
...
Clear GPIO on multi boot loop
2018-08-30 14:47:48 +02:00
Theo Arends
f7c38f24f3
6.1.1.14 Add boot loop detection
...
Add boot loop detection and try to fix
2018-08-30 14:27:33 +02:00
Theo Arends
3abdaaffb7
Revert "6.1.1.14 Add boot loop detection"
...
This reverts commit b9a875d6fb
.
2018-08-30 13:19:09 +02:00
Theo Arends
b9a875d6fb
6.1.1.14 Add boot loop detection
...
Add boot loop detection and try to fix
2018-08-30 12:22:24 +02:00
Theo Arends
624ee28db3
Revisit naming and features
...
Revisit naming and features in preparation to release
2018-08-28 14:28:36 +02:00
Theo Arends
55b43734d8
6.1.1.13 - Fixes
...
6.1.1.13 20180828
* Fix 6.1.1.12 regression of Mem and Var default handling (#3618 )
* Optimizations
2018-08-28 11:10:32 +02:00
Theo Arends
f8666c0410
Some requested additions
...
* Add optional MQTT_TELE_RETAIN to Energy Margins message (#3612 , 3614)
* Add Individual HSBColorX commands (#3430 , #3615 )
* Add RuleX debug options 8,9,10 (StopOnError) to control RuleX execution status after an exception restart (#3607 )
2018-08-28 10:26:33 +02:00
Theo Arends
04c81e31d1
Fix Sonoff Bridge data length
...
Fix Sonoff Bridge data reception when using Portisch EFM8 firmware and in data buffer length (#3605 )
2018-08-27 18:16:28 +02:00
Theo Arends
9978381c94
Fix handling deafult names
...
Fix handling use of default names when using names starting with shortcut character (#3392 , #3600 )
2018-08-27 13:06:22 +02:00
Theo Arends
d69e88b50b
6.1.1.12 - Add debounce time
...
6.1.1.12 20180827
* Add commands ButtonDebounce 40..1000 and SwitchDebounce 40..1000 to have more control over debounce timing. Default is 50mS (#3594 )
2018-08-27 12:01:20 +02:00
Theo Arends
bbd2529914
Sleep fixes part 2 and 3 of 3
...
* Change scheduler phase 2/3 - Fixed when sleep is enabled: Blinktime (#3581 )
* Change scheduler phase 3/3 - Some sensor update timings: AdcEvery 200 -> 250, Senseair 300 -> 250, SDM120 300 -> 250, SDM630 300 -> 250
2018-08-26 17:10:18 +02:00
Theo Arends
f090050e69
6.1.1.11 - Sleep fixes part 1
...
6.1.1.11 20180826
* Change scheduler phase 1 - Fixed when sleep is enabled: Uptime, Delay, PulseTime and TelePeriod (#3581 )
2018-08-26 15:42:35 +02:00
Theo Arends
4defda2f1a
Rewrite some GPIO options
...
Rewrite GPIO options ButtonXn, SwitchXn and CounterXn to select INPUT mode instead of INPUT_PULLUP
2018-08-25 13:08:06 +02:00
Theo Arends
48668bce7b
6.1.1.10 - Disable core 2.4.2 sleep
...
Disable wifi sleep for both Esp8266/Arduino core 2.4.1 and 2.4.2 to solve device freeze caused by Espressif SDK bug (#3554 )
2018-08-25 11:59:21 +02:00
Theo Arends
b34874ba45
Add all ruletimer values
...
Add all ruletimer values to command RuleTimer result message (#3571 )
2018-08-24 18:22:04 +02:00
Theo Arends
ae6fcd4d60
Change sleep command
...
Change command sleep from restart after change to not restart after change (#3554 )
2018-08-24 16:38:55 +02:00
Theo Arends
035bc29475
Fix EnergyReset3
...
Fix EnergyReset3 (#2723 )
2018-08-23 17:38:17 +02:00
Theo Arends
6a5c0d29e8
6.1.1.9 - Fixes and Additions
...
6.1.1.9
* Allow user override of define MAX_RULE_TIMERS (#3561 )
* Allow user override of define MAX_RULE_VARS
* Add GPIO options ButtonXn, SwitchXn and CounterXn to select INPUT mode instead of INPUT_PULLUP (#2525 )
* Fix OtaMagic when file path contains a dash (-) (#3563 )
2018-08-23 16:05:51 +02:00
Theo Arends
bab6ae5644
6.1.1.8 - Fixes and Additions
...
6.1.1.8
* Fix MQTT reconnection detection when using TasmotaMqtt library (#3558 )
* Add build time setting of ButtonTopic and SwitchTopic (#3414 )
* Add display features and dynamic buffering
2018-08-23 11:49:17 +02:00
Theo Arends
43dbbd3a98
Add more display functionality
...
* Add display define USE_DISPLAY_MODES1TO5 to select display modes 1 to 5
* Add command DisplayRotate 0..3 to select persistent display rotation
2018-08-20 18:07:19 +02:00
Theo Arends
6d98864a04
Fix iFan02 power on state
...
Fix iFan02 power on state (#3412 , #3530 )
2018-08-20 15:51:46 +02:00
Theo Arends
6d1ce5bd69
Fix SDM120 wrong values
...
Fix SDM120 reporting wrong negative values to Domoticz (#3521 )
2018-08-19 13:00:27 +02:00
Theo Arends
b12c8d39d5
Add initial display support
...
Add initial display support for Lcd, Oled, Matrix, Tft and e-paper - Need more docs
2018-08-18 18:11:22 +02:00
Theo Arends
8a61c25218
6.1.1.6 Add modulo option to rules
...
Add modulo option to rules like rule1 on Time#Minute|5 do backlog power on;delay 200;power off endon (#3466 )
2018-08-13 13:09:22 +02:00
Theo Arends
ee9b26ecfa
6.1.1.5 - Fix Pow R2 and S31
...
Fix some Pow R2 and S31 checksum errors using optimized re-sync
2018-08-12 16:15:03 +02:00
Theo Arends
3efb84fb93
Change version representation
...
Change version representation from 1.1.1a to 1.1.1.1 for better change reference
2018-08-12 14:05:15 +02:00
Theo Arends
87eb6a25cc
Update changelog
...
Update changelog
2018-08-11 16:24:06 +02:00
Theo Arends
25fee28546
Add message when no JavaScript
...
Add message when JavaScript is not enabled in webbrowser (#3388 )
2018-08-02 12:03:33 +02:00
Theo Arends
9e34d16e9a
Fix sonoff-minimal
...
Fix sonoff-minimal from using default settings
2018-07-30 12:29:56 +02:00