s-hadinger
6842b53425
Berry `FUNC_BUTTON_MULTI_PRESSED` event and make `FUNC_BUTTON_PRESSED` called only on state changes ( #21709 )
2024-06-30 19:14:32 +02:00
Theo Arends
33062dc839
Refactor energy drivers
2024-06-30 16:58:37 +02:00
s-hadinger
8d2d121b6d
Berry `FUNC_ANY_KEY` event calling `any_key()` ( #21708 )
2024-06-29 22:12:34 +02:00
Theo Arends
8a0493b659
Cleanup esp32 energy
2024-06-28 18:04:50 +02:00
Theo Arends
8364eca708
Refactor esp32 energy margins entry
2024-06-28 17:51:05 +02:00
Theo Arends
271446fd66
Remove obsolete SafePower commands
2024-06-28 14:38:08 +02:00
Theo Arends
96a45a6dde
Refactor ESP32 energy
2024-06-28 11:12:28 +02:00
Theo Arends
621f6f59e1
Fix default power windows
2024-06-27 17:07:08 +02:00
Theo Arends
178d42c286
Change ESP32 support for energy margin checks, like ``MaxPower2`` per phase ( #21695 )
...
- Add ESP32 support for power and energy limit checks, like ``MaxEnergy2`` per phase (#21695 )
- Bump version v14.1.0.3
2024-06-27 16:50:45 +02:00
s-hadinger
97017017a4
Matter full support of events ( #21698 )
2024-06-27 00:03:34 +02:00
Theo Arends
af1fa724af
Fix non-webserver compilation
2024-06-25 16:36:28 +02:00
Jason2866
0bddfad14e
No Ethernet support for the C2 ( #21691 )
...
* No Ethernet for the C2
* Post process: Disable always Ethernet for C2
* better check for Ethernet available
* typo
* excluse c2 with `ifndef`
2024-06-25 15:13:16 +02:00
Jason2866
aa39e000f7
add C2 as target for BLE ( #21685 )
2024-06-23 21:44:56 +02:00
gemu
aa380ea190
fix tcp server ( #21660 )
2024-06-21 16:35:20 +02:00
stefanbode
d18925897a
MQTT fix on inverted shutter ( #21663 )
...
* MQTT fix on inverted shutter
* MQTT fix on inverted shutter
2024-06-21 16:35:05 +02:00
Theo Arends
75c47b6948
Extend command ``SetOption147 1`` to disable publish of IRReceived MQTT messages ( #21574 )
2024-06-14 11:23:03 +02:00
Theo Arends
87148ae0c1
Change SerialBridge command ``SSerialSend9`` replaced by ``SSerialMode``
...
- Bump version v14.1.0.2
2024-06-11 17:27:39 +02:00
Theo Arends
4858ec0aef
Allow receive or send using SerialBridge
2024-06-11 12:41:19 +02:00
Theo Arends
ae9d2a2c85
Refactor display modes1 to 4
2024-06-11 11:07:30 +02:00
stefanbode
ae499eb73a
MQTT is not reporting the correct LastChange ( #21605 )
...
I assume this is just missing. I got some side effects on shutters where on MQTT commands the source is still the LAST one before the MQTT
2024-06-10 10:42:02 +02:00
Theo Arends
bdc15960ad
Refactor display show sensors
2024-06-09 16:25:04 +02:00
Theo Arends
ea5c9bc9b6
Fix DisplayMode MQTT (Un)Subscribe without restart
2024-06-09 13:46:54 +02:00
Theo Arends
1e33b45ea8
Add partial DisplayText features to modes1 to 5
2024-06-08 17:22:19 +02:00
Theo Arends
ff961df336
Change display timing splash screen with display modes 1 to 5
2024-06-08 15:33:44 +02:00
Theo Arends
9350f68ac5
Replace optional MQTT_TELE_RETAIN to Energy Margins message by ``SensorRetain``
2024-06-07 11:48:52 +02:00
Christian Baars
7b678ba2c8
forgotten safety check ( #21549 )
2024-06-03 12:09:38 +02:00
Theo Arends
132b98f0c2
Change GPIOViewer from v1.5.3 to v1.5.4 (No functional change)
2024-06-02 12:03:28 +02:00
s-hadinger
0bd5f6b27a
Remove deprecated code from drivers, `USE_TTGO_WATCH` and `USE_M5STACK_CORE2` ( #21533 )
2024-05-31 08:58:11 +02:00
Theo Arends
2771827c15
Changed TCP bridge increased baudrate selection ( #21528 )
...
- Bump v14.0.0.4
2024-05-30 10:50:12 +02:00
Theo Arends
2347f37269
Revert "Fix ESP32 slow response when using UDP as in emulation ( #21470 )"
...
This reverts commit f132663dfe
.
2024-05-29 16:45:16 +02:00
Theo Arends
7c98e0d303
Revert "Another few victims of core3 UDP"
...
This reverts commit 27c35befdf
.
2024-05-29 16:45:04 +02:00
Theo Arends
adcc50ac6e
Revert "Fix network flushes"
...
This reverts commit b88ec44d15
.
2024-05-29 16:44:50 +02:00
Theo Arends
b88ec44d15
Fix network flushes
2024-05-29 14:09:54 +02:00
Theo Arends
27c35befdf
Another few victims of core3 UDP
2024-05-29 11:57:29 +02:00
Theo Arends
f132663dfe
Fix ESP32 slow response when using UDP as in emulation ( #21470 )
2024-05-29 11:46:55 +02:00
Theo Arends
bc6faa733c
Refactor Telegram
2024-05-28 17:47:35 +02:00
Christian Baars
a4dbc57448
multiple fixes ( #21511 )
2024-05-28 10:59:57 +02:00
Theo Arends
7b478f718c
Update changelogs
2024-05-27 22:47:08 +02:00
s-hadinger
bb40642225
Fix Telegram TLS fingerprint, remove CA validation ( #21514 )
2024-05-27 22:31:27 +02:00
Theo Arends
0fe893b01d
Fix unsupported %.2f ( #21508 )
2024-05-27 15:37:15 +02:00
Christian Baars
33f491a8e6
scan wifi asynchronously ( #21498 )
2024-05-27 15:17:09 +02:00
btsimonh
a78169b43a
Webcamshutdown - use FUNC_ABOUT_TO_RESTART ( #21462 )
...
* use FUNC_ABOUT_TO_RESTART for webcam shutdown in webcamv2
* fix an annoying compile warning - lengths are pre-checked to fit anyway.
2024-05-25 19:51:46 +02:00
s-hadinger
0d3e888147
Berry change internal storage of parent class for methods ( #21490 )
...
* Berry change internal storage of parent class for methods
* Fix compilation of zigbee
* Patch solidify for berry_custom
2024-05-24 22:32:37 +02:00
btsimonh
3e0b70af10
Ufs serve fix - makes it work better on esp32cam (ai thinker style) ( #21486 )
...
* Add yield() in file listing, so watchdog does not trigger with very large folders
* update UFSServe function to be like download function.
This removes the use of server.streamFile, and provides a much more reliable download.
Make UFSServe always use this function, regardless of auth requirement. (i.e. no use of the original in the original class, as it still uses streaming.)
Note that UFSServe is enab;ed with #define UFILESYS_STATIC_SERVING
2024-05-24 22:02:09 +02:00
Christian Baars
e5521bb763
Build system: allow easy solidification of external Berry ( #21430 )
...
* custom solidification
* solidify-from-url
* forgot folders
---------
Co-authored-by: Radio Loge <radiologe@MacBook-Pro-von-Radio.local>
2024-05-24 20:57:43 +02:00
Christian Baars
1ca91a8170
Berry webserver: allow to content_send bytes ( #21479 )
2024-05-24 20:55:56 +02:00
Christian Baars
01bd6ec52a
apll not supported on all SOCs ( #21483 )
2024-05-24 15:55:24 +02:00
Theo Arends
a9e7426cff
Changed support W5500 SPI ethernet using four SPI GPIOs only without IRQ and RESET
2024-05-23 15:16:05 +02:00
btsimonh
522f6c5e00
fail UFSServe if Webserver is null. ( #21467 )
2024-05-22 16:26:26 +02:00
Theo Arends
a14aad93cb
Revert "Fix `SendMail` watchdog restart during reconnect to SMTP server ( #21454 )"
...
This reverts commit 784bc3ea5f
.
2024-05-22 15:19:14 +02:00
Theo Arends
784bc3ea5f
Fix `SendMail` watchdog restart during reconnect to SMTP server ( #21454 )
2024-05-22 15:18:38 +02:00
Christian Baars
da4fab66c1
more consistent usage of variables, really use apll rx setting ( #21459 )
2024-05-21 17:43:43 +02:00
Theo Arends
3b4035b3e2
Add FUNC_ABOUT_TO_RESTART ( #21460 )
2024-05-21 17:28:02 +02:00
Theo Arends
73350da88c
Even better fix
2024-05-21 17:14:47 +02:00
Theo Arends
140e4791aa
nicer solution skipping loracommand header
2024-05-21 17:10:19 +02:00
Theo Arends
08afd40823
Remove command header
2024-05-21 16:48:14 +02:00
Theo Arends
00a389bbb2
Add default LoRaCommand disable reception ( #17790 )
2024-05-21 16:18:46 +02:00
Theo Arends
2e51860464
Fix GUI auto-decimal ( #21445 )
2024-05-21 14:27:02 +02:00
btsimonh
2eccc96c62
Ble 32 fixscanning ( #21451 )
...
* restore scanend callback
* fix ble scanning time from 20ms to 20s
* fix connection timeout.
Use ->getLastError() to find out why we did not connect.
* add #define to remove hack if not required in the future.
2024-05-20 20:56:55 +02:00
s-hadinger
7253e83a04
Fixed Zigbee crash when removing `ZbName` ( #21449 )
2024-05-20 16:51:35 +02:00
Christian Baars
e7f69ebc5f
bugfix: webradio crash with invalid url ( #21446 )
2024-05-20 09:12:14 +02:00
Christian Baars
7f7bcd0ab6
small refactoring, more robust handling of commands ( #21439 )
2024-05-19 17:12:54 +02:00
Christian Baars
0e5b2a86b8
i2s audio ,some improvements ( #21433 )
2024-05-18 22:15:59 +02:00
Barbudor
285a6f3532
knx dimmer and colour ( #21434 )
2024-05-18 22:15:46 +02:00
Barbudor
60a42f015e
Add command WebRun (as WebQuery extension) ( #21364 )
...
* tasmota-1m32
* ready
* add code usage
* clean
* remove also that
* remove WebQueryWithFunction in favor of default value
2024-05-18 22:15:16 +02:00
Theo Arends
33b0c1d5c2
Update changelogs
2024-05-18 12:29:51 +02:00
Theo Arends
0d225839da
On universal display remove default backlight power if a PWM channel is used for backlight
2024-05-17 14:08:34 +02:00
Theo Arends
2ddbc7c7fa
Fix watchdog restart or freeze if ``displaytext`` is more than 128 characters ( #21401 )
2024-05-17 12:47:14 +02:00
s-hadinger
b9bd558abe
Enabled watchdog for ESP32 and variants ( #21422 )
...
* Enabled watchdog for ESP32 and variants
* Ensure compilation for sageboot
* Fix compilation
* Fix compilation for RISCV
2024-05-16 21:19:34 +02:00
Theo Arends
6ba59385d4
Fix Domoticz re-subscribe on MQTT reconnect. Regression from v13.4.0.3 ( #21281 )
2024-05-16 14:43:30 +02:00
s-hadinger
4cda2d7dc2
Berry `Leds` uses native WS2812 driver by default ( #21406 )
2024-05-13 22:21:58 +02:00
s-hadinger
2865630309
Prepare for ESP32 WDT ( #21383 )
...
* Prepare for ESP32 WDT
* make `sleep()` reset WDT
2024-05-12 21:12:08 +02:00
s-hadinger
15a5ef30c4
Fixed Berry `gpio.dac_voltage()` ( #21403 )
2024-05-12 21:11:14 +02:00
Barbudor
466dcae840
Quick Fix: KNX loose config on restart ( #21378 )
...
* quick fix
* revert to ascillato test
2024-05-10 10:46:40 +02:00
Theo Arends
3e8ca44681
Attempt to fix TasMesh ( #21395 )
2024-05-10 10:34:58 +02:00
Theo Arends
c7a5cd58f4
Fix a compile error
2024-05-10 10:18:46 +02:00
Christian Baars
08f9b37b99
Berry add gpio.set_freq() ( #21375 )
2024-05-07 09:36:39 +02:00
Theo Arends
21c7f4c81b
Minor changes
2024-05-06 17:36:39 +02:00
Theo Arends
c5e122f922
Add GPIOViewer pin mode support
2024-05-06 17:20:52 +02:00
David Gwynne
cced3d1d93
let berry drivers provide "after_teleperiod" handlers ( #21351 )
...
this is useful if you want to periodically report the state of something
handled separately to the sensors output.
2024-05-05 19:42:27 +02:00
Theo Arends
c41f18a9b6
Fix calloc allignment
2024-05-05 18:26:21 +02:00
s-hadinger
c4e847d288
Fix crash in WebUI
2024-05-05 11:28:28 +02:00
Christian Baars
ca5a2d322d
fix Tensorflow driver for IDF5.x ( #21348 )
2024-05-04 19:59:47 +02:00
Jason2866
1e63c8924e
use "minimal" instead of "safeboot" ( #21346 )
2024-05-04 15:34:11 +02:00
s-hadinger
599526a90c
``Publish3`` to send binary data encoded as Hex, disabled in safeboot ( #21345 )
2024-05-04 15:26:07 +02:00
Marius Bezuidenhout
545cc27ca8
Fixed HexToBytes function. Added Publish3 command. ( #21329 )
2024-05-04 14:42:35 +02:00
Jason2866
9b8cd42e5f
remove crash recorder from safeboot ( #21332 )
...
* remove crash recorder from safeboot
* small refactor
2024-05-03 14:47:14 +02:00
s-hadinger
18bdf07903
Reduced safeboot size by 2.9KB ( #21322 )
...
* Reduced safeboot size by 2.9KB
* remove leftover
2024-05-02 23:09:56 +02:00
s-hadinger
24c8f65cb5
Compilation of Ethernet when SPI drivers are disabled ( #21321 )
2024-05-02 22:07:37 +02:00
s-hadinger
d08bf78e24
Zigbee startup event triggered after plugins are loaded ( #21320 )
2024-05-02 21:54:44 +02:00
s-hadinger
f7e285ab11
Fixed `EthType` for Core3 ( #21317 )
2024-05-02 14:46:28 +02:00
Christian Baars
5b5fdb0afe
WIP: make I2S bridge compile with Core 3, untested on hardware ( #21301 )
...
* make I2S bridge compile with Core 3, untested on hardware
* typo USE_I2S_BRIDGE
* rm Core 2 version
2024-04-28 22:09:09 +02:00
Christian Baars
b3c075c666
I2S changes for Core 3 ( #21291 )
...
* i2s fixes and refactoring
* DMA setting added, more refactoring
2024-04-27 20:50:03 +02:00
s-hadinger
bf01e5bb70
Fix async HMDI CEC ( #21287 )
2024-04-27 18:22:50 +02:00
Jason2866
eef4ff389f
Delete IDF 4.4 based i2s code ( #21188 )
...
* Delete tasmota/tasmota_xdrv_driver/xdrv_42_2_i2s_mp3stream.ino
* Delete tasmota/tasmota_xdrv_driver/xdrv_42_0_i2s_audio.ino
* Delete tasmota/tasmota_xdrv_driver/xdrv_42_1_i2s_mp3mic.ino
2024-04-25 13:41:47 +02:00
s-hadinger
1e64eaddf3
Berry `webserver.content_close()` ( #21276 )
2024-04-25 12:50:43 +02:00
s-hadinger
469492a41a
Berry `web_add_handler` called before `Webserver` is initialized ( #21272 )
2024-04-25 09:08:24 +02:00
s-hadinger
582ca598f0
HDMI CEC synchronously sends messages ( #21270 )
2024-04-24 20:06:13 +02:00
s-hadinger
91dd120aa9
TCP Tx En GPIO type ( #21269 )
2024-04-24 19:53:01 +02:00
s-hadinger
595b7f750d
LVGL fix memory allocation of flush buffers ( #21256 )
2024-04-23 20:11:01 +02:00
s-hadinger
5ecd45e2da
Berry avoid crash when Berry is disabled after bootloop ( #21235 )
2024-04-21 10:03:55 +02:00
s-hadinger
c4431eb6fe
Fixed IPv6 support in safeboot ( #21233 )
2024-04-20 22:15:54 +02:00
Theo Arends
9b5df76860
Add Domoticz safeguards
2024-04-18 11:21:35 +02:00
s-hadinger
042eecc378
HASPmota `dropdown_list` and fixes ( #21208 )
2024-04-17 21:43:12 +02:00
Theo Arends
e6d9d826ac
Clean up code
2024-04-17 21:40:45 +02:00
Theo Arends
b6b74ecb96
Fix regression on SendKey() ( #21187 )
2024-04-17 17:30:25 +02:00
Theo Arends
0bb1fcbc00
Change comments
2024-04-17 15:58:20 +02:00
Theo Arends
e4936f6c5f
Fix ethernet
2024-04-17 15:34:14 +02:00
Theo Arends
e95c940345
Change ESP32 Ethernet Phy Type number for ETH_PHY_DM9051 from 4 to 10 ( #21204 )
2024-04-17 15:10:45 +02:00
Theo Arends
ecf2504edf
Fix invalid rule handling
2024-04-15 17:25:11 +02:00
Jason2866
6492596a10
Fix BLE compile with core 3.0.0 ( #21182 )
...
* Delete lib/libesp32_div/NimBLE-Arduino directory
* rm obsolete ignores
2024-04-15 10:24:06 +02:00
s-hadinger
5f7584efe4
Fade out on CCT bulb with `SO92 1` ( #21159 )
2024-04-12 19:53:37 +02:00
gemu
7984b7513c
support for centered pictures ( #21140 )
2024-04-11 15:36:37 +02:00
gemu
d5ee89677b
scriptsize cmd ( #21139 )
2024-04-11 15:36:27 +02:00
Theo Arends
1b5fdb5c57
update changelogs
2024-04-11 14:07:25 +02:00
s-hadinger
39ad5a41bb
Core3 ethernet simplify ipv6 ( #21141 )
2024-04-10 23:12:20 +02:00
Theo Arends
54e4aba750
Add LoRaWan MAC response
2024-04-09 14:06:38 +02:00
Theo Arends
d678666ef0
Fix MQTT heatindex calculation
2024-04-08 14:58:31 +02:00
Theo Arends
9cacf2f609
Fix Power off due to overtemp and/ot overload
2024-04-08 12:03:11 +02:00
s-hadinger
541f3630a1
Wifi provide Mac Address on Core3 ( #21117 )
2024-04-07 10:55:53 +02:00
Theo Arends
02f6e05289
Fixed M5Core2 LoRa868 module receive exception
2024-04-06 15:04:05 +02:00
s-hadinger
2128dfbade
Refactored Wifi for ESP32 to allow for Core3 ( #21106 )
...
* Refactored Wifi for ESP32 to allow for Core3
* Fix case in include
* Grrr
* Fix compilation
* Fix Ethernet IPv6
* Fix wrong hostname due to mac address unknown at start
2024-04-05 23:44:21 +02:00
s-hadinger
07a2df1b74
Berry add `flash.current_ota` ( #21097 )
2024-04-04 19:14:33 +02:00
Theo Arends
ed7909f23f
Removed unused `#define MQTT_DATA_STRING` support
2024-04-04 17:03:08 +02:00
gemu
ad3782bed1
google charts memory leak ( #21093 )
2024-04-04 10:18:57 +02:00
Theo Arends
1ebdbfd6a4
Allow Domoticz unsubsctibe using command ``DzIdx0 0`` ( #21019 )
2024-04-01 13:56:40 +02:00
Barbudor
0422b25e31
Change format of KNX Energy to match specifications ( #21074 )
...
* take 1
* refactor knx enhancement
* round on energy + auto show temp/hum sensors
2024-03-31 21:15:53 +02:00
Theo Arends
b15a0e2f1f
Add support for Domoticz non-persistent ``DzIdx5`` to ``DzIdx32`` ( #21019 )
2024-03-31 14:33:27 +02:00
gemu
e336913b32
fix multidisplay mode ( #21067 )
2024-03-31 08:16:15 +02:00
Theo Arends
caed27645e
Consolidate Lora memory usage
2024-03-30 15:02:20 +01:00
Theo Arends
6ccb3ae290
Move Lora variables from fixed to heap
2024-03-29 17:56:06 +01:00
Theo Arends
4b44d2fa32
Change ESP32 WiFi phy modes 11n and 11ax represented as HT20, HT40 and HE20 ( #19350 )
2024-03-29 13:04:44 +01:00
Theo Arends
0814acb8dc
Fix Lora ESP32S3 compile warning
2024-03-28 18:20:13 +01:00
Theo Arends
bd3c7d8ddf
Fix LoRaWan joining
2024-03-28 17:51:09 +01:00
Theo Arends
894e46cb5a
Refactor lorawan
2024-03-28 17:15:45 +01:00
Theo Arends
7c52906a2e
Fix ESP8266 Lora SX1262 exceptions
2024-03-27 23:03:10 +01:00
s-hadinger
6ad2c4c945
LVGL simplify configuration ( #21043 )
2024-03-26 23:16:16 +01:00
Theo Arends
03cf7dc460
Fix ESP32 LoRaWanBridge OTAA
2024-03-26 17:02:44 +01:00
Pabasara Perera
2fff690af3
Azure iothub direct method support ( #21013 )
...
* feature: azure iot hub direct method support
* null terminator
* Remove vulnerability
---------
Co-authored-by: s-hadinger <49731213+s-hadinger@users.noreply.github.com>
2024-03-25 22:11:36 +01:00
s-hadinger
10465ce941
Added GPIO for SPI for Universal Touch Screen ( #21025 )
...
* Added GPIO for SPI for Universal Touch Screen
* Rename GPIOs
* Fix indentation
* Add parsing of I2C Reset and IRQ GPIOs
2024-03-25 22:04:50 +01:00
Theo Arends
f10218a257
Add support for LoRaWanBridge
2024-03-23 15:20:22 +01:00
gemu
31adf74634
fix linker error ( #21017 )
2024-03-23 10:05:56 +01:00
gemu
aad917d060
Email32 more debug ( #21010 )
...
* more debug on esp32 mail
* Update xdrv_01_2_webserver_esp32_mail.ino
2024-03-22 08:09:16 +01:00
s-hadinger
3c70e63af8
LVGL library from v9.0.0 to v9.1.0 ( #21008 )
2024-03-21 18:47:41 +01:00
gemu
a38e88422f
fix google char memory leak ( #20995 )
2024-03-21 15:11:40 +01:00
Theo Arends
c18ed34685
Fix Lora watchdog
...
- Update file JSON settings demo
2024-03-20 18:18:31 +01:00
s-hadinger
9c34707401
Zigbee added for attributes of type `uint48` used by energy monitoring ( #20992 )
2024-03-19 22:21:10 +01:00
Frank Werner
70bce974b2
Add MCP23S08 support ( #20971 )
2024-03-18 10:18:14 +01:00
gemu
ca17be0e0b
fix regression ( #20962 )
2024-03-16 12:11:48 +01:00
Marcus Better
1a462c986c
[tuyamcu_v2] Fix suppressed dimmer updates from MQTT ( #20950 )
...
The driver tried to avoid loops when state updates from the MCU (eg
from physical button press) could be reflected back by Tasmota and
trigger another MCU command, followed by a state update. It did this
by tracking the source of the command in the last_source and
last_command_source variables, suppressing the command if either of
those was SRC_SWITCH.
However this logic is faulty: Since there are two last_source
variables to check, a command might reset one of them, but the other
would still suppress the update. As it turns out, MQTT commands would
only set last_source but not last_command_source. As a result, any
dimmer changes via MQTT would be dropped by the driver and not applied
to the MCU.
Switch functionality (on/off) was still working because those do not
rely on last_command_source, only last_source.
This change removes the loop detection logic altogether for dimmer
updates. This should be safe, because the driver already has the
latest dimmer value in its shadow state, and will not try to re-apply
a current value, thus breaking the loop.
This patch has been tested with several CE-WF500D dimmers which had
this problem.
2024-03-14 17:42:52 +01:00