mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
19,676 Commits 6 Branches 113 Tags 1.2 GiB
Commit Graph

9234 Commits

Author SHA1 Message Date
Theo Arends 798edc20c2 Version v14.2.0.2 
- Changed Energy BL09xx command ``CurrentSet`` input changed from Ampere to milliAmpere
 2024-08-21 16:27:43 +02:00
Theo Arends ba7161fb00 Fix ESP8266 energy cal range chk 2024-08-20 17:30:18 +02:00
Theo Arends ab2d6c1169 Add Energy command ``PowerSet 60,230`` to calibrate both Current and Power with known resistive load of 60W at 230V using calibrated Voltage 2024-08-20 13:08:56 +02:00
Theo Arends c5b92d3ab1 Add Energy Log level 4 message when (Calculated) Apparent Power is less than Active Power indicating wrong calibration (#20653) 2024-08-19 22:31:56 +02:00
Theo Arends 4f62a0deab Refactor to TimeReacged() 2024-08-18 12:46:23 +02:00
Theo Arends e74142724c Disable 64-bit timing support 2024-08-18 12:13:44 +02:00
Theo Arends 903686f7b5 Add 64-bit timing support 2024-08-16 11:56:07 +02:00
Theo Arends c0eb28dae9 Harden shutter timeouts 2024-08-16 11:53:58 +02:00
Theo Arends 652b9cef87 Fix PZEM continue energy monitoring when one phase fails (#21968) 2024-08-15 17:32:11 +02:00
stefanbode 6d2647fd5f
fix potential overflow on uptime 2nd try (#21966) 
* fix potential overflow

* fix potential overflow

* fix overflow on millis()

* fix overflow on millis()

* Update xdrv_27_shutter.ino

---------

Co-authored-by: Theo Arends <11044339+arendst@users.noreply.github.com>
 2024-08-15 14:28:10 +02:00
Theo Arends 1b24378da5 Free 500 code bytes on ADC/ESP8266 2024-08-15 12:52:12 +02:00
stefanbode 851f11dcdd
fix potential overflow on uptime (#21965) 
* fix potential overflow

* fix potential overflow

* fix potential overflow

* fix potential overflow
 2024-08-15 10:08:54 +02:00
Theo Arends 30cffa1acc Bump version v14.2.0.1 2024-08-14 15:13:00 +02:00
Theo Arends 102428f768 Needed too 2024-08-13 15:13:04 +02:00
Theo Arends b93e6cee7b Change GUI name of Analog<x> to ADC<x> 2024-08-13 15:11:51 +02:00
Theo Arends ff46745252 Fix ADC conversion to v14.1.0.4 2024-08-13 13:57:58 +02:00
Theo Arends 8f75684cd7 Add Rule and Scripter xdrv sensor polling 2024-08-13 12:28:09 +02:00
Theo Arends 5bac2a2331 Revert "Add Rule and Scripter xdrv sensor polling" 
This reverts commit cc2ea328d5.
 2024-08-11 19:29:10 +02:00
Theo Arends cc2ea328d5 Add Rule and Scripter xdrv sensor polling 2024-08-11 17:47:01 +02:00
Theo Arends d3f6d7d844 Sync ESP8266 energydriver with ESP32 2024-08-10 17:15:05 +02:00
Theo Arends 85da678132 Fix ADC bad energy jumps 2024-08-10 17:01:14 +02:00
Theo Arends bcd1a9c986 Fix ADC multiple GPIO parameter storage 2024-08-09 16:11:30 +02:00
f-reiling de59b036d0
improved read access for SDM630 (#21897) 
* improved read access for SDM630

read access improved by reading several registers in one cycle -> higher update rate

* fixed compiler warning

* fix review finding

* added SDM630_HIGH_UPDATE_RATE to select new implementation
 2024-08-09 09:23:52 +02:00
Norbert Richter 663fc88373
Update NeoPool comments (#21920) 2024-08-07 16:09:53 +02:00
sfromis 77669f7e20
Update my_user_config.h (#21921) 
Adding SetOption references for a few `#define`, to make the relation clear, and in the common searchable format like `[SetOption147]`. Also added that since some time now, this option covers both `SSerialReceived` and `IrReceived`.
 2024-08-07 16:08:52 +02:00
Theo Arends 040ffb33e0 Fix restore ADC energytoday on power cycle 2024-08-06 18:07:26 +02:00
s-hadinger f88a635d5d
Zigbee loads device data early before MCU startup (#21917) 2024-08-06 12:43:15 +02:00
Theo Arends 4f035d18f6 Fix invalid ADC energy reset 2024-08-04 18:06:24 +02:00
Theo Arends 3473c3c1b0 Fix scientific notation for 1234.5 (#21131) 2024-08-04 17:42:15 +02:00
Theo Arends bdec6aed67 Update xsns_02_analog.ino 2024-08-04 16:37:36 +02:00
Theo Arends 469f12abbc Add ADC support for Shelly Plus RGBW PM 2024-08-04 16:35:02 +02:00
Theo Arends 82add09bf9 Fix Core 3.0.4 baudrate detection 2024-08-04 16:11:13 +02:00
Theo Arends f6c3064890 Fix ADC migration 2024-08-03 18:03:41 +02:00
Theo Arends c7faff7ac6 Refactored Analog driver to better support multiple channels 
- Add command ``AdcGpio<gpio> <parameters>`` to better support ADC configuration
 2024-08-03 17:52:47 +02:00
Fabrizio Amodio 73357b6cfd
prevent spike on power ON on BioPDU (#21892) 2024-08-03 10:10:11 +02:00
s-hadinger 3c884118ed
Berry `zigbee.started()` (#21895) 2024-08-02 19:42:11 +02:00
s-hadinger 6b98a320b1
Berry `zigbee.find()` (#21889) 2024-08-02 15:43:31 +02:00
s-hadinger 010ca34622
Berry `energy` module support for 8 phases and move to pseudo-arrays (#21887) 
* Berry `energy` module support for 8 phases and move to pseudo-arrays

* add size()
 2024-08-01 22:37:37 +02:00
s-hadinger a3ed99e549
Change Energy `power_history` arrays to prepare for Berry mapping (#21876) 2024-07-31 14:27:34 +02:00
gemu ba596993a0
fix sd mmc free space display (#21869) 
* fix sd mmc free space display

* Update xdrv_50_filesystem.ino
 2024-07-30 22:24:31 +02:00
Jan-David Förster 4101ad7303
xsns_14_sht3x.ino - data types adjusted, code size reduced (#21868) 
* code size, data type improvements

* Change temp calculation to int
 2024-07-30 22:23:53 +02:00
s-hadinger 0c52b40f49
Adjust Matter code size 2024-07-29 09:43:05 +02:00
Theo Arends a98399367b Fix analog reset adcparam 1 2024-07-28 18:58:06 +02:00
Theo Arends 88293d7414 Analog GPIO changes 
- Analog GPIO ``ADC Input`` with ``AdcParam<x> 1,<start_range>,<end_range>,<margin>,1`` provide direct light control
- Analog GPIO ``ADC Voltage`` with ``AdcParam<x> 11,<start_range>,<end_range>,<lowest_voltage>,<highest_voltage>`` provide energy monitoring with dc voltage
- Analog GPIO ``ADC Current`` with ``AdcParam<x> 12,<start_range>,<end_range>,<lowest_current>,<highest_current>`` provide energy monitoring with dc voltage
 2024-07-28 18:52:38 +02:00
Theo Arends 87ec0cce21 Revert "Analog GPIO extensions" 
This reverts commit 7c1cf6a81f.
 2024-07-28 18:47:13 +02:00
Theo Arends 7c1cf6a81f Analog GPIO extensions 
- Analog GPIO ``ADC Input`` with ``AdcParam<x> 1,<start_range>,<end_range>,1`` provide direct light control
- Analog GPIO ``ADC Voltage`` with ``AdcParam<x> 11,<start_range>,<end_range>,<lowest_voltage>,<highest_voltage>`` provide energy monitoring with dc voltage
- Analog GPIO ``ADC Current`` with ``AdcParam<x> 12,<start_range>,<end_range>,<lowest_current>,<highest_current>`` provide energy monitoring with dc voltage
 2024-07-28 18:33:43 +02:00
SteWers 068e8e6cbe
Update de_DE.h (#21857) 2024-07-28 14:24:47 +02:00
Theo Arends a4e592c776 Refactor analog 
- Change from double to float where possible
- Fix Voltage/Current energy calculation
 2024-07-28 14:15:35 +02:00
bovirus a9651e1bf1
Update Italian language (#21856) 2024-07-28 09:19:21 +02:00
Theo Arends d7c6474104 Add Analog Voltage and Current 2024-07-27 17:11:25 +02:00