Theo Arends
56615dce4e
Add command AdcParam
...
Add command AdcParam to control ADC0 Temperature and Light formula parameters
2019-05-24 12:28:09 +02:00
Theo Arends
7204f85a3a
Add support for SPS30 Particle sensor thanks to Gerhard Mutz ( #5830 )
...
Add support for SPS30 Particle sensor thanks to Gerhard Mutz (#5830 )
2019-05-21 10:39:54 +02:00
Theo Arends
9c0bd2a665
Add HX711 weight restore after controlled restart or after power restore just before executing command Sensor34 7 ( #5367 , #5786 )
...
Add HX711 weight restore after controlled restart or after power restore just before executing command Sensor34 7 (#5367 , #5786 )
2019-05-19 17:49:00 +02:00
Theo Arends
a777bb6cdf
6.5.0.11 Add command SetOption64 0/1 to switch between "-" or "_" as sensor index separator
...
6.5.0.11 20190517
* Add command SetOption64 0/1 to switch between "-" or "_" as sensor index separator impacting DS18X20, DHT, BMP and SHT3X sensor names (#5689 )
2019-05-17 14:23:21 +02:00
Theo Arends
ad54ece2fb
6.5.0.10 Enable ADC0 by default
...
6.5.0.10 20190513
* Enable ADC0 by default in my_user_config.h (#5671 )
* Add user configurable ADC0 to Module and Template configuration compatible with current FLAG options (#5671 )
2019-05-13 15:56:01 +02:00
Theo Arends
e8e7b25b80
6.5.0.9 Add command SetOption63
...
6.5.0.9 20190418
* Add command SetOption63 0/1 to disable relay state feedback scan at restart (#5594 , #5663 )
* Fix TasmotaSerial at 9600 bps solving DFPlayer comms (#5528 )
* Fix Shelly 2.5 overtemp
2019-04-18 16:24:46 +02:00
Theo Arends
df6645481e
6.5.0.7 Add command LedMask
...
6.5.0.7 20190410
* Add command LedMask to assign which relay has access to power LED (#5602 , #5612 )
2019-04-10 14:26:36 +02:00
Theo Arends
aa91caa35e
6.5.0.6 Add WebColor parameters to Settings
...
6.5.0.6 20190409
* Add WebColor parameters to Settings making them persistent and remove the need for using a rule
* Add alternative IRSend command syntax IRSend raw,<freq>,<header mark>,<header space>,<bit mark>,<zero space>,<one space>,<bit stream> (#5610 )
2019-04-09 13:56:19 +02:00
Theo Arends
be385ecb5c
Add command WebColor
...
* Add rule Http#Initialized
* Add command WebColor to change non-persistent GUI colors on the fly
Use a rule like:
rule3 on http#initialized do webcolor {"webcolor":["#eeeeee","#181818 ","#4f4f4f","#000000 ","#dddddd","#008000 ","#222222 ","#ff0000","#008000 ","#ffffff","#1fa3ec","#0e70a4","#d43535","#931f1f","#47c266","#5aaf6f","#ffffff","#999999 ","#000000 "]} endon
or
rule3 on http#initialized do webcolor {"webcolor":["#eee","#181818 ","#4f4f4f","#000 ","#ddd","#008000 ","#222 "]} endon
to make color changes persistent)
2019-04-08 22:37:39 +02:00
Theo Arends
8ff2759ccc
6.5.0.4 Fix Configure Timer Web GUI
...
6.5.0.4 20190402
* Fix Configure Timer Web GUI (#5568 )
* Add validation check when loading settings from flash
2019-04-02 15:47:39 +02:00
Theo Arends
f7c30250c1
Change some more defines to const
...
Change some more defines to const
2019-03-31 11:59:04 +02:00
Theo Arends
e8e5d1c03c
6.5.0.3 Add command Sensor20
...
6.5.0.3 20190328
* Add command Sensor20 1..255 to change Nova Fitness SDS01 working period in minutes (#5452 )
2019-03-28 12:06:48 +01:00
Theo Arends
2959ec9341
Prep for release with fix some warnings
...
Prep for release with fix some warnings
2019-03-14 16:50:56 +01:00
Theo Arends
9e8ed1ae79
Kudos and houskeeping
...
Kudos and houskeeping
2019-03-01 15:37:22 +01:00
netpok
b3adab4097
Add flag for no hold retain
2019-02-21 21:27:52 +01:00
Theo Arends
a201dd1222
Remove command SetOption62
...
Remove command SetOption62 as it's functionality is replaced by user changing the device template (#5255 )
2019-02-17 16:05:53 +01:00
Theo Arends
98ae3eaf54
6.4.1.16 Online template change
...
6.4.1.16 20190211
* Initial support for online template change using command Template (#5177 )
2019-02-11 19:21:49 +01:00
andrethomas
7e56dc538d
MHZ19: Allow enable and disable of ABC
2019-02-01 18:46:37 +02:00
Theo Arends
304ac6fe44
6.4.1.12 code changes (byte/boolean)
...
6.4.1.12 20190128
* Change code use of boolean to bool and byte to uint8_t
* Change code uint8_t flags to bool flags
2019-01-28 14:08:33 +01:00
Theo Arends
505c4794d1
6.4.1.11 Rewrite interlock
...
6.4.1.11 20190124
* Remove command SetOption14 as it has been superseded by command Interlock
* Remove command SetOption63 as it has been superseded by command Interlock
* Add command Interlock 0 / 1 / 1,2 3,4 .. to control interlock ON/OFF and add up to 8 relays in 1 to 4 interlock groups (#5014 )
2019-01-25 17:46:27 +01:00
Theo Arends
b5824fc361
Housekeeping
2019-01-18 10:52:18 +01:00
lobocobra
15e4918238
As requested in issue 824# by ascillato2, implement split interlock.
...
=> Split interlock of SONOFF with more than 2 channel into 2 groups
=> This is needed for shutter and similar utilization
2019-01-13 11:00:02 +01:00
Theo Arends
70619ed610
Housekeeping
2019-01-07 16:43:03 +01:00
Theo Arends
a23f01080b
6.4.1.8 Add template flags
...
6.4.1.8 20190107
* Change sonoff_template.h layout regarding optional module flags like ADC0
* Add command SetOption62 1 to force no Button/Switch pullup on dedicated modules. Currently only supported on Shelly2 (#4841 )
2019-01-07 16:33:18 +01:00
Theo Arends
67cf1dbbcf
6.4.1.5 Add mDns user control
...
6.4.1.5 20190103
* Remove command SetOption35 0-255 for mDNS start-up delay (#4793 )
* Add command SetOption55 0/1 to disable/enable mDNS (#4793 )
2019-01-03 17:30:54 +01:00
Theo Arends
447ec6256e
6.4.1.4 Update Copyright (C) 2019
...
6.4.1.4 20190101
* Update Copyright (C) 2019
2019-01-01 13:55:01 +01:00
Erik
fd965eba09
Remove SetOption55 (hass_short_discovery_msg)
2018-12-22 13:16:04 +01:00
Erik
a65041fee5
Enabled forced local operation when button- or switchtopic is set
2018-12-08 08:44:59 +01:00
andrethomas
46816f2f07
MCP230xx - Add Interrupt Retain
2018-12-07 00:55:44 +02:00
Erik
74172f14d3
Further improve Hass auto discovery
2018-12-02 16:39:59 +01:00
Theo Arends
eb3c1a327d
6.3.0.15 Update dynamic sleep
...
6.3.0.15 20181201
* Removed command SetOption36 (#4497 )
* Add command SetOption60 0/1 to select dynamic sleep (0) or sleep (1) (#4497 )
2018-12-01 18:53:42 +01:00
andrethomas
6050cd40f3
Merge sleep command
2018-12-01 18:47:25 +02:00
Adrian Scillato
c51e657ed9
Added command CalcRes
2018-11-26 21:16:09 -03:00
Theo Arends
b4e2fe0439
6.3.0.13 Add command SetOption59
...
6.3.0.13 20181126
* Add command SetOption59 0/1 to change state topic from tele/STATE to stat/RESULT (#4450 )
2018-11-26 13:01:42 +01:00
Erik
eda60b6124
Support sending tele/STATUS as state/RESULT
2018-11-25 21:27:19 +01:00
Theo Arends
070843200f
Add IR Raw data control
...
* Add command SetOption58 0/1 to enable IR raw data info in JSON message (#2116 )
* Add command IRSend <frequency>|0,<rawdata1>,<rawdata2>,.. to allow raw data transmission (#2116 )
2018-11-21 16:36:10 +01:00
Theo Arends
c502f0934f
Add command SetOption57
...
* Add command SetOption57 0/1 to enable wifi network re-scan every 44 minutes with a rssi threshold of 10 to select highest RSSI (#3173 )
* Fix MQTT connection error after restart
2018-11-19 23:06:42 +01:00
Theo Arends
e34a1f0719
Add wifi network scan
...
* Add command SetOption56 0/1 to enable wifi network scan and select highest RSSI (#3173 )
2018-11-19 18:07:25 +01:00
Erik
89b58f62af
Add option for new Hass discovery feature
2018-11-15 17:37:53 +01:00
Theo Arends
9fef82736d
Prep drivers for management
...
Prep drivers for management
2018-11-07 10:30:03 +01:00
Theo Arends
f14491afb6
Merge pull request #4296 from chaosmaster/patch-1
...
tuya: fix SetOption20 behavior for Oittm/Moes
2018-11-07 09:02:47 +01:00
Joel Stein
a2b7bdac45
tuya: name flag SetOption54
2018-11-06 23:27:49 +01:00
Theo Arends
15148f290d
6.3.0.4 Add SetSensorXX
...
6.3.0.4 20181106
* Add command SetSensorXX 0/1 to disable/re-enable compiled xsns_XX_sensor.ino driver
2018-11-06 17:33:51 +01:00
Theo Arends
14a7424e9b
Add command SetOption24
...
Add command SetOption24 0/1 to select pressure unit as hPa or mmHg (#4241 )
2018-11-04 16:55:12 +01:00
Theo Arends
46a0a0afba
Add minutes to commands Timezone
...
Add minutes to commands Timezone to allow all possible world timezones
2018-11-01 13:00:05 +01:00
Theo Arends
e6a8b2d30d
Add TotalStartTime to Energy JSON
...
Add TotalStartTime to Energy JSON message (#3971 )
2018-10-30 17:04:19 +01:00
Theo Arends
cc56677ba3
Add Gui Hostname display
...
Add command SetOption53 0/1 to toggle gui display of Hostname and IP address
2018-10-29 12:21:27 +01:00
Theo Arends
a7c912111c
Resize HX711 weight_item field
...
Resize HX711 weight_item field from 16 bit to 32 bit
2018-10-21 17:54:51 +02:00
Theo Arends
f8ab8ef552
Clean settings.h
...
Removed custom fields from settings.h
2018-10-17 15:29:43 +02:00
Theo Arends
6b660026cd
Add cmnds Reset 4 and Reset 5
...
Add commands Reset 4 (reset to defaults but keep wifi params) and Reset 5 (as reset 4 and also erase flash) (#4061 )
2018-10-15 14:43:47 +02:00