Commit Graph

70 Commits

Author SHA1 Message Date
Adrian Scillato 5d03cc3a3a
Enable VL53L0X and disable TSL2561 for Tasmota-Sensors and Tasmota32 2021-04-13 13:37:48 -03:00
Theo Arends f50c3f8f62 Admin USE_ENERGY_DUMMY 2021-04-06 12:08:07 +02:00
Theo Arends d2824dd9ba Update BUILDS.md 2021-04-01 18:05:59 +02:00
Theo Arends 0331e47e4c Add support for multiple CCS811 sensors
Add support for multiple CCS811 sensors with baseline control (USE_CCS811_V2) by clanganke (#10858)
2021-03-31 15:04:24 +02:00
Theo Arends be72bde8f5 Add ESP32 support for internal Hall Effect sensor
Add ESP32 support for internal Hall Effect sensor connected to both GPIO36 and GPIO39 only
2021-03-27 15:15:15 +01:00
Jason2866 8bc48d37b2
No Discovery 2021-03-21 14:33:12 +01:00
Jan Bubík c6673d4081 new feature: LCD/DLP Projector Serial Control
- implemented as XDRV53
 - user must configure GPIO pins "DLP Rx" and "DLP Tx" for serial communication
 - emulates an additional RELAY by sending ON/OFF commands to Projector
 - continually polls the Projector's state to update virtual RELAY state
 - blocks RELAY1 in ON state while Projector is running (to protect the lamp)
 - serial codes for NEC and OPTOMA, ready for more manufacturers
 - tested with NEC V300W
2021-02-27 22:28:29 +01:00
Theo Arends 14206e46a1 Add support for TM1637 seven segment display by Ajith Vasudevan (#10889) 2021-02-17 12:32:36 +01:00
Norbert Richter 435be84ff3
Add SDM72 Modbus energy meter 2021-02-09 16:13:40 +01:00
Theo Arends c934a20b4f Add support for TOF10120
Add support for TOF10120 time of flight sensor by Cyril Pawelko (#10190)
2021-01-22 16:48:41 +01:00
Norbert Richter 8387c14dfc
Add NeoPool feature 2021-01-20 15:06:59 +01:00
Theo Arends 7c4770e69c Update BUILDS.md 2021-01-11 14:14:22 +01:00
Theo Arends f6d7c5c578 Update changelog 2021-01-11 14:13:20 +01:00
Theo Arends 54c1a2d029 Add support for SPI display driver for ST7789 TFT
Add support for SPI display driver for ST7789 TFT by Gerhard Mutz (#9037)
2021-01-01 15:05:58 +01:00
Barbudor f1c675e7a1 Also referencing USE_IBEACON_ESP32 2020-12-29 12:08:33 +01:00
Barbudor 46db2f2c99 BUILDs should refer MI_ESP32 in tasmota32 and tasmota32-sensors 2020-12-29 12:06:14 +01:00
Theo Arends 931929c952 Add support for MFRC522
Add support for SPI connected MFRC522 13.56MHz rfid card reader (#9916)
2020-12-06 16:32:07 +01:00
Theo Arends 6fed564ee5
Update BUILDS.md 2020-11-22 14:43:14 +01:00
Julio Gonzalez Gil 2eb70531e4 Document state of USE_PING at BUILDS.md 2020-11-22 14:38:42 +01:00
Theo Arends c02770ce96 Add support for Shelly Dimmer 1 and 2
Add support for Shelly Dimmer 1 and 2 by James Turton (#9854)
2020-11-14 16:43:32 +01:00
Theo Arends 4b6465fd10 Add support for fingerprint sensor
Add support for AS608 optical and R503 capacitive fingerprint sensor
2020-11-11 17:31:48 +01:00
Theo Arends e498b28864 Add support for EZO PMP sensors
Add support for EZO PMP sensors by Christopher Tremblay (#9760)
2020-11-07 11:35:33 +01:00
Theo Arends 54f9532919 Add command ``SetOption114 1``
Add command ``SetOption114 1`` to detach Swiches from Relays and enable MQTT action state for all the SwitchModes
2020-11-03 14:34:02 +01:00
Theo Arends 67bd5daf45 Update changelog 2020-11-02 11:58:23 +01:00
Theo Arends db863c4589 Add support for EZO FLO
Add support for EZO FLO sensors by Christopher Tremblay (#9697)
2020-11-01 15:15:10 +01:00
Theo Arends 6f7a20e2ec Add support for EZO PRS sensors
Add support for EZO PRS sensors by Christopher Tremblay (#9659)
2020-10-29 11:53:25 +01:00
Theo Arends 85d2626e84 Refactor feature list build 2020-10-28 11:37:59 +01:00
Theo Arends a96218fc1c v9.0.0.3
- Add TLS in binary tasmota-zbbridge (#9620)
- Add support for EZO CO2 sensors by Christopher Tremblay (#9619)
2020-10-25 14:46:13 +01:00
Theo Arends 582c32f5b9 Add support for EZO EC sensor
Add support for EZO EC sensors by Christopher Tremblay (#9613)
2020-10-24 12:41:08 +02:00
Theo Arends 1021cf3ca5 Update changelog and releasenotes 2020-10-23 16:56:03 +02:00
Theo Arends 500fb147c4 Add Breaking Changed to Release Notes
- Support for EZO RTD sensors by Christopher Tremblay (#9585)
- On ZigbeeBridge support for glowing led when permit join is active (#9581)
- Support for PWM Dimmer multi-press and ledmask (#9584)
2020-10-20 14:04:29 +02:00
Theo Arends 38e2638f07 Add support for EZO Ph and ORP sensors
Add support for EZO Ph and ORP sensors by Christopher Tremblay (#9567)
2020-10-18 15:36:17 +02:00
Christopher Tremblay d8b8636a44 EZOpH & EZOORP support
This commits adds support for EZOpH and EZOORP to Tasmota
2020-10-18 05:10:12 -07:00
Theo Arends 330109d67c Add optional support for Orno WE517
Add optional support for Orno WE517-Modbus energy meter by Maxime Vincent (#9353)
2020-10-02 16:37:43 +02:00
Theo Arends 760d702fd0 Add optional support for Mitsubishi Electric HVAC
Add optional support for Mitsubishi Electric HVAC by David Gwynne (#9237)
2020-10-02 15:10:21 +02:00
Theo Arends 201bad3eb0 Prep release 8.5 2020-09-06 18:41:39 +02:00
Morris Jobke 2ba87c9667
Add USE_PROMETHEUS flag to build list 2020-09-01 12:34:01 +02:00
Theo Arends 25a187499b Prep release 8.4.0 2020-07-29 10:44:09 +02:00
Theo Arends 0cc1dd957b Add SO98 to control user rotary support 2020-07-02 18:13:14 +02:00
Jason2866 9ecef62e8b
Update BUILDS.md 2020-06-25 15:43:17 +02:00
Theo Arends 934526244f Add support for single wire LMT01
Add support for single wire LMT01 temperature Sensor by justifiably (#8713)
2020-06-17 17:22:41 +02:00
Theo Arends 1181a701ce Update BUILDS.md 2020-06-17 15:03:09 +02:00
Charles 6cbae1fafe Added French Metering Teleinfo 2020-06-12 21:53:12 +02:00
device111 05a2c3c164 correction of BUILS.md and mcp9808 Domoticz index 2020-06-02 11:34:25 +02:00
device111 8c29ead09d Add support for up to eight MCP9808 temperature sensors 2020-06-02 08:35:49 +02:00
Theo Arends 79083a9882 Update BUILDS.md 2020-05-16 11:30:16 +02:00
Theo Arends b37092adb8 Update BUILDS.md 2020-05-13 14:49:13 +02:00
Theo Arends 05c7661e04 Update BUILDS.md 2020-05-13 14:47:31 +02:00
Theo Arends 2fbad7b389 Change webcam driver number
Change webcam driver number as ESP32 driver only starting now from 81.
2020-05-07 16:53:56 +02:00
Theo Arends d78ca09c30 Integrate OpenTherm and WindMeter 2020-05-07 16:03:27 +02:00