* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Update en_GB.h
* Update xsns_100_ina3221.ino
* Add files via upload
* Add files via upload
I hope I have all details now changed ;-))
* Add files via upload
I still found a little detail to beutify ;-)
* Add support for pipsolar inverter
* Fix CI-Warnings
* Remove unneeded define
* Pipsolar: Fix dat result
* Add support for the rules engine
---------
Co-authored-by: Peter Rustler <peter@rustlerit.de>
* Add new setting windmeter_measure_intvl and update speed computation
* Ensure windmeter_measure_intvl is not below 1
* Keep same settings order in response messages and add better comments
* Add files via upload
Added ENS16x library enabling read-out of ENS160 and ENS161 sensor component (follow-up of CCS811 and iAQcore)
Added ENS210 library to read out ENS210 temperature & humidity sensor
* Add files via upload
Add air quality sensor readout for ENS160 and ENS161 checking two possible I2C addresses (follow up sensor for CCS811 and iAQcore)
Add temperature and humidity sensor readout checking two possible I2C addresses
* Update BUILDS.md
Add USE_ENS16x and USE_ENS210
* Update decode-status.py
Add USE_ENS16x and ENS210
* Update I2CDEVICES.md
Add USE_ENS16x and USE_ENS210
* Update my_user_config.h
Add USE_ENS16x and USE_ENS210
* Update support_features.ino
Add USE_ENS16x and USE_ENS210
* Update tasmota_configurations.h
Add USE_ENS16x and ENS210
* Update tasmota_configurations_ESP32.h
Add USE_ENS16x and USE_ENS210
* Update xsns_111_ens16x.ino
Corrected I2X number
* Update xsns_112_ens210.ino
Corrected I2C number
* Disable USE_ENS16x and USE_ENS210 by default
* Added code size information
* cut down in libs
* optimize tasmota side
* fix ens16x web display
* final fix on alternate addresses
* update code & RAM usage
---------
Co-authored-by: Barbudor <barbudor@barbudor.net>
* fix: don't reset the device when coming out of deep sleep
* fix: move debug log message to inside the device validation
* Update xsns_110_max17043.ino
* add: update global battery percentage when max17043 reports new value
* Added a passive mode in sen5x sensor for parasitic installations. This skips reset & initialization of sensor on startup and reduces the polling to every 10 seconds to not interfere with and confuse the other I2C master on the bus, e.g. Ike* Vindstyrka.
* Removed obsolete updateCount. Cleanup.
* add: update DEBUG_THERMOSTAT to only control the virtual switch
Also, debug output is still generated but end user can control this debug level 3
* add: debug output of main controller parameters when thermostat enabled
Also, add units for debug outputs added to make them more intelligible
* Update xdrv_39_thermostat.ino
* add: debug message when sensor is detected as not alive
fix: display thermostat number in debug messages
* add: log message prefix string for thermostat
* Update xdrv_39_thermostat.ino
fix: typos in comments
add: debug messages
* add: debug prefix for thermostat
* add: debug prefix added to output lines
* fix: comment typos and small grammatical changes for clarity
* add: debug prefix 'THE' added to debug output
* Restart MAX17043 from the scratch
* revert change
* Changed battery capacity in charge (capacity is the Ah value of the battery, this degrades over time when battery ages)
* merge
* Changing xsns_109 to 110
* fix nr
* removed old xsns109
* Update I2CDEVICES.md
* clean-up usage of Interface
* New LWT on deepsleep
To allow better integration into HA LWT topic will report details of sleep status:
16:54:04.388 MQT: hm/tele/ESP_3284D1/LWT =
{"Sleep":{"Time":"2023-07-17T16:55:03","Sleep":1689612844,"Wakeup":1689612903}}
* Revert LWT back to non JSON
Send DeelSleep on LWT
Send Deepsleep parameters on topic DeepSleep
* Setting default for batteryLevel
* Enable BatteryPercentSet
Changing the battery level e.g. by rule
* Added Battery % to status message
* added battery_level_percent
* Added battery % support in STATE message
* Enable setting battery level
101 is reserved for power-plug. No battery Level reported
* Setting default for battery Level
101 is reserved for power plug
0..100 normal battery values
* Revert back LWT to Offline
Removed "DeepSleep" LWT status until further decision is made. Current implementation is technical sufficient for HA to detect a battery powered device
* Added discovery message after deepsleep change
* Added discovery for battery and deepsleep
This change will allow mqtt messages simpler by allowing something like
`publish cmnd/ir-bridge/IRHVAC {"Power": "On"}`.
The simpler format is required for working with mqtt clients like
iotMQTTPanel or similar on android.
Limitations:
- Requires full message be sent at-least once. I work around this with
a `system#boot` rule
- Gets messy with multiple devices. I have only one AC per room, and
this doesn't doesn't interfere with other IR devices.
TODO:
- [ ] Change the build flag `INCREMENTAL_IRAC`to a `SetOption`
- [ ] Persist `irac_prev_state` across reboots.
- [ ] Support multiple devices.
* IR: Added support for new A/C protocol fields
New fields introduced in IRremoteESP8266 v2.8.5:
1. Command (one of: [Control | Config | iFeel | Timer], default: Control) - allows to set IR command type (e.g. iFeel for no-beep ambient sensor report)
2. iFeel (boolean, default: false) - configures whether iFeel (ambient sensor temp. is used by the A/C unit)
3. SensorTemp - the ambient sensor temperature reading to send
Note:
- Fan setting via int is now 6-value (breaking change -> 6 is the new max)
* IR A/C: Model now pretty-printed to JSON
Model string is the default (falls back to int if n/a)
* IR A/C: Added separate JSON resp. per command type
* No change for "kControlCommand" (default/legacy).
* SensorReport/Timer/Config commands only contain relevant JSON nodes
Additionally:
Clock has time semantics (input: minutes, output: HH:MM), except for "config" mode,
where state.clock is used as ConfigKey and state.sleep is used as ConfigValue.
---------
Co-authored-by: Mateusz Bronk <2566147+mbronk@users.noreply.github.com>
* Added support for Dingtian Relay Board v3.6.10
* Output OE was never initialized
* Removed white spaces trying to fix language builds
* Fix for https://github.com/arendst/Tasmota/pull/18535#pullrequestreview-1406978097
* Fixed language builds
---------
Co-authored-by: JeroenSt <nospam@nospam.org>
* Worked on ESP32 dimmer with Zero cross
Until now the ESP32 does not support zero-cross dimmer. I take a sneak how they did in in ESPhome and adapted the approach to TASMOTA. At the end it works that smooth that likely i will change ESP8266 either so we have a common code. Currently ESP8266 is not touched.
There is a minor issue with savedata == default. When changing the dimmer value the interrupts get stopped during write of the config data to flash.
* ESP8266 Dimmer added
Worked all so well and the code is much smaller. There is no need for reconfiguration on existing users. But there are settings not needed anymore. Will work on the documentation. Anyhow existing installations can upgrade without hickup
* Optimized endpoints at dimmer 0 and 100
* Removed debug stuff
* Fix Issue at dimmer = 0
* Small bugfix
* Final checked Version
* Update xsns_01_counter.ino
* Add missing func
* Update xsns_01_counter.ino
* Moved out of the house of counter and build my own one
* New ZeroCross Driver
* Update xdrv_91_zerocrossDimmer.ino
* evolving
* Delete xdrv_91_zerocrossDimmer.ino
* Add files via upload
* Changed drv number from 1 to 68
* Commit to merge
* Initial support for PMSA003I air quality sensor.
* Updated pmsa003i support to the latest dev branch
* Fixed typo in esp32 configuration
Removed all global variable and use the PM25_AQI_Data struct from Adafruit library
Fix typo Xsns100 to Xsns104
Fix Typo XI2C_71 to XI2C_78
* Move everything in custom Struct for PMSA003I driver
---------
Co-authored-by: Jean-Pierre Deschamps <info@jpdeschamps.com>
Jason2866
s-hadinger
Christian Baars
Theo Arends
fb-pilot
stefanbode
Fulvio Spelta
chefpro
gemu
Barbudor
Norbert Richter
nusse
Paul Blacknell
tyler.li
Matteo Albinola
Christoph Friese
Andre H. Beckedorf
Vincent de Groot
Andrew Klaus
Subhash Chandra
Mateusz Bronk
Jeroen
Christian Baars
Szewcson
Anton ACE
Jean-Pierre Deschamps