Theo Arends
15b41881d8
Changed PubSubClient MQTT_SOCKET_TIMEOUT
...
Changed PubSubClient MQTT_SOCKET_TIMEOUT from 15 to 4 seconds
2021-01-20 17:34:47 +01:00
Jason2866
d05a1149bf
M5 core2 added
2021-01-20 17:14:58 +01:00
Theo Arends
5561de02fa
Add support for Sugar Valley NeoPool Controller
...
Add support for Sugar Valley NeoPool Controller by Norbert Richter (#10637 )
2021-01-20 17:03:53 +01:00
Theo Arends
35bc095e00
Add support for SM2135 current selection
...
Add support for SM2135 current selection using GPIO ``SM2135 DAT`` index (#10634 )
2021-01-20 11:20:56 +01:00
Theo Arends
47e23082cc
Update changelog
2021-01-17 17:01:52 +01:00
s-hadinger
f52f26f566
Added ``USE_MQTT_TLS_DROP_OLD_FINGERPRINT`` compile time option to drop old (less secure) TLS fingerprint ( #10584 )
...
Co-authored-by: Stephan Hadinger <stephan.hadinger@gmail.com>
2021-01-16 18:07:01 +01:00
Theo Arends
2dbd1ef973
Add support for 24/26/32/34 bit RFID Wiegand
...
Add support for 24/26/32/34 bit RFID Wiegand interface (D0/D1) by Sigurd Leuther (#3647 , #10565 )
2021-01-16 15:39:33 +01:00
Stephan Hadinger
cc43530639
ESP32 support for TLS MQTT using BearSSL (same as ESP8266)
2021-01-15 18:23:05 +01:00
Theo Arends
fdbd1dcc0a
Changed command ``Sleep 0``
...
Changed command ``Sleep 0`` removes any sleep from wifi modem except when ESP32 BLE is active
2021-01-14 17:03:01 +01:00
Theo Arends
85b2d62225
ESP8266 Support for 2MB and up linker files with 1MB and up LittleFS
...
Breaking Change: ESP8266 until now NOT SUPPORTED linker files 2MB and up. Current settings will be overwritten once LittleFS is enabled
2021-01-11 17:56:18 +01:00
Theo Arends
f6d7c5c578
Update changelog
2021-01-11 14:13:20 +01:00
s-hadinger
6a6454d8ab
Zigbee debounce duplicate commands ( #10477 )
...
* Zigbee debounce duplicate commands received from the same device within ``USE_ZIGBEE_DEBOUNCE_COMMANDS`` milliseconds
* Zigbee debounce duplicate commands received from the same device within ``USE_ZIGBEE_DEBOUNCE_COMMANDS`` milliseconds
Co-authored-by: Stephan Hadinger <stephan.hadinger@gmail.com>
2021-01-09 17:58:57 +01:00
Theo Arends
696c4ca0e8
Add command ``SetOption43 1..100``
...
Add command ``SetOption43 1..100`` to control Rotary step (#10407 )
2021-01-07 18:01:53 +01:00
Theo Arends
d319bc8ecb
Support rotary encoder on Shelly Dimmer
...
Support rotary encoder on Shelly Dimmer (#10407 )
2021-01-07 17:53:48 +01:00
Theo Arends
23cb8ac559
Support for time proportioned relays
...
Support for time proportioned (``#define USE_TIMEPROP``) and optional PID (``#define USE_PID``) relay control (#10412 )
2021-01-07 15:07:14 +01:00
Theo Arends
d6a24c6fe7
Breaking change ESP32 file system
...
Breaking change ESP32 switch from default SPIFFS to default LittleFS file system loosing current (zigbee) files
2021-01-06 15:28:56 +01:00
Theo Arends
f8de9150d0
Add rotary No Pullup GPIO selection
...
Add rotary No Pullup GPIO selection ``Rotary A/B_n`` (#10407 )
2021-01-06 12:51:12 +01:00
Theo Arends
204316bf1b
Change force initial default state ``SetOption57 1``
...
Change force initial default state ``SetOption57 1`` to scan wifi network every 44 minutes for strongest signal (#10395 )
2021-01-05 17:14:01 +01:00
Stephan Hadinger
8acb06515c
IRremoteESP8266 library from v2.7.13 to v2.7.14
2021-01-04 18:43:58 +01:00
Theo Arends
fb2c10cb97
Add SPI display driver SSD1331 Color oled
...
Add SPI display driver SSD1331 Color oled by Jeroen Vermeulen (#10376 )
2021-01-04 14:26:27 +01:00
Theo Arends
619e4bbfb5
Add command ``RuleTimer0`` to access all RuleTimers at once
...
Add command ``RuleTimer0`` to access all RuleTimers at once (#10352 )
2021-01-03 17:31:44 +01:00
Theo Arends
d028e5c847
Update changelog
2021-01-03 17:04:14 +01:00
Stephan Hadinger
d0b426b505
Disable `USE_LIGHT`` light support for ZBBridge (saves 17.6kb)
2021-01-02 19:26:24 +01:00
Theo Arends
2b7d605696
Changed maximum chars in AddLog_P logging
...
Changed maximum chars in AddLog_P logging reduced from 700 to 128 (LOGSZ) to enhance stability
2021-01-02 16:20:15 +01:00
Theo Arends
54c1a2d029
Add support for SPI display driver for ST7789 TFT
...
Add support for SPI display driver for ST7789 TFT by Gerhard Mutz (#9037 )
2021-01-01 15:05:58 +01:00
Theo Arends
58e6ec55f1
Breaking change replacing SPI CS and SPI DC
...
Breaking change replacing SPI CS and SPI DC by device specific CS and DC
2020-12-31 16:17:30 +01:00
Theo Arends
9c2b8040f1
Revert "Breaking change replaced NRF24L01 GPIO selection"
...
This reverts commit 01f3a7da19
.
2020-12-30 17:52:05 +01:00
Theo Arends
01f3a7da19
Breaking change replaced NRF24L01 GPIO selection
...
Breaking change replaced NRF24L01 GPIO selection from ``GPIO_SPI_CS`` by ``GPIO_NRF24_CS`` and ``GPIO_SPI_DC`` by ``GPIO_NRF24_DC``
2020-12-30 17:49:52 +01:00
Stephan Hadinger
488712c3f0
Commands `CTRange` and `VirtualCT`
2020-12-29 19:31:27 +01:00
Theo Arends
37bd2a99f6
Add basic support for ESP32 Odroid Go 16MB binary tasmota32-odroidgo.bin
...
Add basic support for ESP32 Odroid Go 16MB binary tasmota32-odroidgo.bin (#8630 )
2020-12-29 18:03:05 +01:00
Theo Arends
f004cfea60
Breaking change regarding MFRC522 and ILI9341
...
- Replaced MFRC522 13.56MHz rfid card reader GPIO selection from ``GPIO_SPI_CS`` by ``GPIO_RC522_CS``
- Replaced ILI9341 GPIO selection from ``GPIO_SPI_CS`` by ``GPIO_ILI9341_CS`` and ``GPIO_SPI_DC`` by ``GPIO_ILI9341_DC``
2020-12-29 17:42:53 +01:00
Theo Arends
c4410a9823
Update changelog
2020-12-29 10:59:36 +01:00
Theo Arends
d161026534
Add support for Afrikaans language translations by Christiaan Heerze
2020-12-28 11:53:02 +01:00
Theo Arends
83b3aa576d
Add BSSID and Signal Strength Indicator to GUI wifi scan result ( #10253 )
...
Add BSSID and Signal Strength Indicator to GUI wifi scan result (#10253 )
2020-12-27 16:25:34 +01:00
Theo Arends
d75beb92f3
Add support character `#` to be replaced by `space`-character
...
Add support character `#` to be replaced by `space`-character in command ``Publish`` topic (#10258 )
2020-12-26 12:18:16 +01:00
Theo Arends
fbdb0aae0d
Update changelogs
2020-12-24 13:58:32 +01:00
Theo Arends
59992d1954
Add support for FTC532 8-button touch controller
...
Add support for FTC532 8-button touch controller by Peter Franck (#10222 )
2020-12-22 16:47:24 +01:00
Theo Arends
6ea7359821
Update changelog
2020-12-21 15:23:37 +01:00
Theo Arends
85ed1bebca
Fix compile error when ``#ifdef USE_IR_RECEIVE`` is disabled regression from 9.1.0.2
...
Fix compile error when ``#ifdef USE_IR_RECEIVE`` is disabled regression from 9.1.0.2
2020-12-20 17:22:48 +01:00
Theo Arends
09bb1ecb8e
Fix ESP32 LoadStoreError when using ``#define USER_TEMPLATE``
...
Fix ESP32 LoadStoreError when using ``#define USER_TEMPLATE`` (#9506 )
2020-12-20 16:40:49 +01:00
Theo Arends
7599dab36d
Fix Wyze bulb option
2020-12-20 15:25:13 +01:00
Theo Arends
dcfb74f457
Support for GPIO option selection
...
- Support for GPIO option selection
- Gpio ``Option_a1`` enabling PWM1 high impedance if powered off and no fading as used by Wyze bulbs (#10196 )
2020-12-20 13:22:01 +01:00
Theo Arends
9153746d5d
Update changelog
2020-12-19 12:25:55 +01:00
Theo Arends
9fb2f18169
Update changelog
2020-12-19 12:25:02 +01:00
Theo Arends
b7af08c03b
Redesign syslog and mqttlog using log buffer
...
Redesign syslog and mqttlog using log buffer (#10164 )
2020-12-18 15:37:20 +01:00
Theo Arends
0a7d441e65
Add support for P9813 RGB Led MOSFET controller
...
Add support for P9813 RGB Led MOSFET controller (#10104 )
2020-12-17 16:33:26 +01:00
Theo Arends
078a9a258a
Add milliseconds to console output
...
Add milliseconds to console output (#10152 )
2020-12-17 14:16:53 +01:00
Theo Arends
eaa9da7d11
Bump version to v9.2.0.1
2020-12-17 14:03:02 +01:00
Theo Arends
694a675ddf
Update changelog
2020-12-16 14:39:37 +01:00
Theo Arends
b41248eb23
Update changelog
2020-12-15 16:45:25 +01:00
Stephan Hadinger
a2e41aa61a
Command ``SetOption117 1`` for light fading to be fixed duration instead of fixed slew rate ( #10109 )
2020-12-14 19:47:10 +01:00
Stephan Hadinger
1558f0c731
Zigbee add visual map of network
2020-12-12 19:05:47 +01:00
Theo Arends
80434500da
mDNS has been disabled from all pre-compiled binaries to allow new features
...
mDNS has been disabled from all pre-compiled binaries to allow new features
2020-12-08 11:49:11 +01:00
Theo Arends
821270adc1
Update changelog
2020-12-08 11:06:19 +01:00
Theo Arends
d7ed311587
Update changelog
2020-12-07 12:34:09 +01:00
Theo Arends
931929c952
Add support for MFRC522
...
Add support for SPI connected MFRC522 13.56MHz rfid card reader (#9916 )
2020-12-06 16:32:07 +01:00
Theo Arends
80ab642076
Add command ``RfProtocol`` to control RcSwitch
...
Add command ``RfProtocol`` to control RcSwitch receive protocols by BBBits (#10063 )
2020-12-06 14:58:00 +01:00
Theo Arends
75d35d407e
Removed PN532 define USE_PN532_CAUSE_EVENTS
...
Removed PN532 define USE_PN532_CAUSE_EVENTS replaced by generic rule trigger `on pn532#uid=`
2020-12-02 18:01:38 +01:00
Theo Arends
c85dba8c1e
Update changelog
2020-12-02 14:26:40 +01:00
Theo Arends
0c95f2ec8e
Update changelog
2020-11-28 16:10:19 +01:00
Theo Arends
bb85fa95b0
Update changelog
2020-11-27 18:26:56 +01:00
Theo Arends
4b5dbe7a86
Fix reset to defaults after 6 hours of DeepSleep
...
Fix reset to defaults after 6 hours of DeepSleep (#9993 )
2020-11-27 16:43:56 +01:00
Stephan Hadinger
9641f8e536
IRremoteESP8266 library from v2.7.12 to v2.7.13
2020-11-25 19:41:51 +01:00
Theo Arends
b5d9157060
Merge pull request #9975 from Jason2866/patch-1
...
added -free -fipa-pta change in changelog
2020-11-25 18:19:29 +01:00
Theo Arends
742171ca5e
Add support for multiple WeMo devices
...
Add support for multiple WeMo devices by Magic73 (#9208 )
2020-11-25 18:17:44 +01:00
Jason2866
9ff72eb343
added -free -fipa-pta change
2020-11-25 18:07:43 +01:00
Theo Arends
3f597001d1
Add support for common anode sevenseg displays
...
Add support for common anode sevenseg displays by adding ``#define USE_DISPLAY_SEVENSEG_COMMON_ANODE`` by Ken Sanislo (#9963 )
2020-11-25 17:30:25 +01:00
Theo Arends
9433b691a4
Fix ESP32 TasmotaClient firmware upgrade
...
Fix ESP32 TasmotaClient firmware upgrade (#9218 )
2020-11-25 14:58:18 +01:00
Theo Arends
547e5d9c5d
Fix command ``gpio``
...
Fix command ``gpio`` using non-indexed functions regression from v9.1.0 (#9962 )
2020-11-24 15:14:22 +01:00
Stephan Hadinger
ebb4c18aae
Zigbee persistence of device/sensir data in EEPROM (only ZBBridge)
2020-11-21 10:31:27 +01:00
Theo Arends
17c94a2b62
Changed MQTT Wifi connection timeout
...
Changed MQTT Wifi connection timeout from 5000 to 200 mSec (#9886 )
2020-11-17 16:44:00 +01:00
Theo Arends
ab886db6b2
Update change log
2020-11-17 13:56:07 +01:00
Theo Arends
92f067af59
Change Shelly Dimmer fw upgrade
...
Change Shelly Dimmer fw upgrade using WebGUI Firmware Upgrade and file from folder `tools/fw_shd_stm32/`
2020-11-17 12:25:48 +01:00
Theo Arends
e1963e98dc
Breaking change KNX DPT9 to DPT14
...
- Version bump to 9.1.0.2
- Breaking change KNX DPT9 (16-bit float) to DPT14 (32-bit float) by Adrian Scillato (#9811 , #9888 )
2020-11-17 10:36:57 +01:00
Stephan Hadinger
8634a7a387
IRremoteESP8266 library from v2.7.11 to v2.7.12
2020-11-14 19:31:50 +01:00
Theo Arends
c02770ce96
Add support for Shelly Dimmer 1 and 2
...
Add support for Shelly Dimmer 1 and 2 by James Turton (#9854 )
2020-11-14 16:43:32 +01:00
Theo Arends
abb56854f5
Update changelog
2020-11-14 13:34:39 +01:00
s-hadinger
dd8bb39a02
Zigbee ``SetOption116 1`` to disable auto-query of light devices (avoids network storms with large groups) ( #9847 )
...
Co-authored-by: Stephan Hadinger <stephan.hadinger@gmail.com>
2020-11-14 11:15:41 +01:00
Stephan Hadinger
698dd755de
Zigbee command ``ZbLeave`` to unpair a device
2020-11-13 19:23:35 +01:00
Theo Arends
203124d678
Add command ``SetOption115 1`` to enable ESP32 MiBle
...
Add command ``SetOption115 1`` to enable ESP32 MiBle
2020-11-13 17:00:44 +01:00
Theo Arends
846da7b6ca
Fix GUI MqttUser and MqttPassword updates
...
Fix GUI MqttUser and MqttPassword updates when TLS is compiled in (#9825 )
2020-11-13 13:54:51 +01:00
Theo Arends
14034ee9d1
Fix KNX buttons, switches and sensors detection
...
Fix KNX buttons, switches and sensors detection regression from v9.1.0 (#9811 )
2020-11-13 11:21:28 +01:00
Theo Arends
9915c9e731
Fixed Telegram group chatid not supported
...
Fixed Telegram group chatid not supported (#9831 )
2020-11-13 09:54:01 +01:00
Theo Arends
4b6465fd10
Add support for fingerprint sensor
...
Add support for AS608 optical and R503 capacitive fingerprint sensor
2020-11-11 17:31:48 +01:00
Stephan Hadinger
39b0cf4c56
Zigbee command ``ZbInfo`` and prepare support for EEPROM
2020-11-11 12:09:18 +01:00
Theo Arends
371b00823e
Change Sonoff L1 color up scaling and color margin detection
...
Change Sonoff L1 color up scaling and color margin detection (#9545 )
2020-11-09 15:04:22 +01:00
Theo Arends
85612776f6
Add Tuya commands
...
Add commands ``TuyaRGB``, ``TuyaEnum`` and ``TuyaEnumList`` (#9769 )
2020-11-08 12:51:08 +01:00
Theo Arends
138ddfb16e
Removed version compatibility check
...
Removed version compatibility check
2020-11-07 15:43:52 +01:00
Theo Arends
e498b28864
Add support for EZO PMP sensors
...
Add support for EZO PMP sensors by Christopher Tremblay (#9760 )
2020-11-07 11:35:33 +01:00
Theo Arends
780db5271c
Update changelog
2020-11-07 11:09:16 +01:00
Theo Arends
fa7fdbd51a
Consolidate `AddLog_P`
...
Consolidate `AddLog_P` into `AddLog_P2` and rename to `AddLog_P`
2020-11-06 17:09:13 +01:00
Theo Arends
488a360d5b
Fixed NTP fallback server functionality
...
Fixed NTP fallback server functionality (#9739 )
2020-11-06 15:22:03 +01:00
Theo Arends
cc69244a8f
Changed platformio compiler option
...
Changed platformio compiler option `no target align` enabled for stage
2020-11-05 13:55:17 +01:00
Theo Arends
cdf66b6eff
Version bump
2020-11-05 13:33:17 +01:00
Theo Arends
e2a094802b
Update CHANGELOG.md
2020-11-05 10:22:04 +01:00
Theo Arends
4d8fab75a8
Add command ``DimmerStep 1..50``
...
Add command ``DimmerStep 1..50`` to change default dimmer up and down step of 10% by James Turton (#9733 )
2020-11-05 10:01:15 +01:00
Theo Arends
78196f0391
Removed auto output selection
...
Removed auto output selection of decimal or hexadecimal data based on user input. Now only based on ``SetOption17``
2020-11-04 17:42:30 +01:00
Theo Arends
8376dd8982
Fix switches
2020-11-04 16:31:53 +01:00
Theo Arends
7915e82cb0
Prep release 9.1
2020-11-04 15:57:40 +01:00
Theo Arends
9f191d9214
Breaking change when ``SetOption73 1``
...
Breaking change when ``SetOption73 1`` JSON result from `{"ACTION":"SINGLE"}` to `{"Button1":{"Action":"SINGLE"}}`
2020-11-03 15:42:55 +01:00