Staars
a95c5b4f6a
resolve conflict
2020-02-06 19:06:09 +01:00
Theo Arends
175753fb61
Merge pull request #7680 from effelle/development
...
New HAss Discovery (2/4): MQTT
2020-02-06 17:52:52 +01:00
Federico Leoni
757baf436a
Update xdrv_12_home_assistant.ino
2020-02-06 13:32:54 -03:00
Staars
8d48cf3731
pin configs and renames to prepare PR
2020-02-06 17:05:37 +01:00
Theo Arends
48d70bc7bb
Add Buzzer commands
...
Add command ``Buzzer -1`` for infinite mode and command ``Buzzer -2`` for following led mode (#7623 )
2020-02-06 16:25:37 +01:00
Theo Arends
709fa19eb2
Merge pull request #7623 from to-scho/feature/buzzer_modes
...
Buzzer extensions
2020-02-06 16:05:18 +01:00
Theo Arends
d779a2b9b4
Add switch modes 11 and 12
...
Add switch modes 11 (PUSHHOLDMULTI) and 12 (PUSHHOLDMULTI_INV) (#7603 )
2020-02-06 14:53:35 +01:00
Federico Leoni
f2e1ef4763
Update xdrv_12_home_assistant.ino
2020-02-06 10:23:45 -03:00
Theo Arends
702821b4e1
Merge pull request #7603 from RemiDing/development
...
New switchmodes to control a dimmer with one switch
2020-02-06 14:14:12 +01:00
Theo Arends
12f603cc59
Add support for sensor DHT family using Shelly Add-On
...
- Fix Hass sensor discovery part 1/4 by Federico Leoni (#7582 , #7548 )
- Add support for sensor DHT family on Shelly 1 and Shelly 1PM using Shelly Add-On adapter (#7469 )
2020-02-06 12:42:31 +01:00
Federico Leoni
0c046d7e7c
Update xdrv_12_home_assistant.ino
2020-02-05 23:29:44 -03:00
Staars
a4e613a992
use MAC, small WEB-UI changes
2020-02-05 20:34:38 +01:00
Theo Arends
df35a54824
Add link to issue 7469
...
Add support for sensor DS18x20 on Shelly 1 and Shelly 1PM using Shelly Add-On adapter (#7469 )
2020-02-05 16:57:19 +01:00
Staars
e8f8b48c77
clean ups, hopefully no real code changes
2020-02-05 16:56:41 +01:00
Theo Arends
186d3fcb4d
Add support for Shelly Add-On adapter
...
Add support for sensor DS18x20 on Shelly 1 and Shelly 1PM using Shelly Add-On adapter
2020-02-05 16:28:56 +01:00
Hadinger
fcac1619fd
Extend to Stage
2020-02-04 22:19:29 +01:00
Staars
47ead336cb
adding HM10AT and HM10BAUD, HM10PERIOD now immediately takes effect
2020-02-04 19:30:41 +01:00
Staars
09ba4d15fc
cleanup and refactoring, HM10PERIOD now shows value
2020-02-04 17:55:48 +01:00
Staars
c4d92d6368
add command interface: HM10SCAN and HM10PERIOD
2020-02-04 15:02:47 +01:00
Staars
e1973fbfff
fix regression: no temp/hum-read
2020-02-04 14:12:46 +01:00
Theo Arends
3b5a73429b
Merge pull request #7663 from gemu2015/sml_update
...
Sml script dynamic baudrate and serial transmit support
2020-02-04 09:24:45 +01:00
Theo Arends
90c84b0c42
Merge branch 'development' into ir_273_dev
2020-02-04 09:23:08 +01:00
Theo Arends
6700f79585
Merge branch 'development' into zigbee_29
2020-02-04 09:21:35 +01:00
Staars
0b8040c3c0
add battery, some fixes
2020-02-04 08:13:09 +01:00
gemu2015
79261c7512
Update xsns_53_sml.ino
2020-02-04 07:09:29 +01:00
gemu2015
fc92896ef5
sml dynamic baud and transmit support
2020-02-04 07:07:56 +01:00
Hadinger
97f4924639
Change update IRRemoteESP8266 v2.7.3
2020-02-03 19:41:35 +01:00
Hadinger
49ebd870ca
Add ``ZbBind`` (experimental) and bug fixes
2020-02-02 20:53:49 +01:00
Staars
46e06a6fcb
error fixes
2020-02-02 19:07:31 +01:00
Hadinger
9ce92d7df8
Fixed comment
2020-02-02 18:38:27 +01:00
Hadinger
02df35b6b5
Safeguard if delay is too high
2020-02-02 18:02:31 +01:00
Staars
b64abc9757
dynamic sensor discovery
2020-02-02 17:44:26 +01:00
Hadinger
ed455df760
Fix PWM flickering at low levels ( #7415 )
2020-02-02 13:13:44 +01:00
Theo Arends
26cee00e2f
Merge pull request #7626 from to-scho/hotfix/shutterbuttons_simultaneous_press
...
simultaneous shutter button press per shutter
2020-02-01 19:07:13 +01:00
Staars
cb067237ad
stabilize readings
2020-02-01 16:17:20 +01:00
Hadinger
3b61d77680
Fix wrong CT channel for Module 48
2020-02-01 14:23:13 +01:00
Staars
f6a93a8d60
unify codebase
2020-01-31 18:50:11 +01:00
Staars
a1d7d2baf8
output working
2020-01-31 15:28:34 +01:00
Staars
b9e3815358
adding stuff
2020-01-31 10:12:48 +01:00
Staars
3e43c4c551
Merge branch 'development' of https://github.com/arendst/Sonoff-Tasmota into hm10
2020-01-31 07:39:35 +01:00
to-scho
c6a2854a6e
simultaneous shutter button press per shutter
...
detect simultaneous press per shutter and not for whole module
2020-01-30 14:33:33 +01:00
Staars
15428f59e9
add some stuff from the mp3-driver
2020-01-30 09:18:21 +01:00
Staars
07df4c1dfb
start hm-10-driver
2020-01-30 08:39:28 +01:00
RemiDing
5278a84252
POWER_INCREMENT added
2020-01-28 15:37:18 +01:00
RemiDing
deb8398d0b
maybe needed
2020-01-28 15:15:49 +01:00
RemiDing
7892bad81b
toggle pressed and not_pressed
2020-01-28 15:10:23 +01:00
to-scho
72935bdcc6
Buzzer extensions
...
Add infinite mode (count==-1), add follow led mode (count==-2), add count>1 for tune playback
2020-01-28 11:22:36 +01:00
Theo Arends
42461aaaf3
Fix command Publish payload handling
2020-01-27 17:38:32 +01:00
to-scho
11b13f73b0
fix shutterposition call w/o arguments after boot
2020-01-27 11:05:11 +01:00
Theo Arends
a2a650102e
Merge pull request #7615 from to-scho/hotfix/shutter_wraparound_endstoptime
...
fix position wrap around when shutterendstoptime is enabled
2020-01-27 10:38:28 +01:00
to-scho
0d03c1682e
fix position wrap around when shutterendstoptime is enabled
2020-01-27 09:46:39 +01:00
Hadinger
fab03d8173
Add ``SetOption84 1`` sends AWS IoT device shadow updates (alternative to retained)
2020-01-26 23:08:52 +01:00
Theo Arends
9efe67127d
Refactor wifi code
2020-01-26 15:52:26 +01:00
Theo Arends
3d00c4f093
Change wifi connectivity stability
...
Change wifi connectivity stability (#7602 )
2020-01-26 14:30:11 +01:00
Theo Arends
7ad63b4760
Merge pull request #7602 from wir3z/development
...
Address multiple WiFI connectivity /stability issues.
2020-01-26 14:21:06 +01:00
Theo Arends
ff01f934e2
Bump version 8.1.0.5
2020-01-26 14:20:40 +01:00
Theo Arends
5b0259e7c3
Keep legacy support
2020-01-26 14:16:44 +01:00
CORP\vdi
81c6355b8f
Address multiple WiFI connectivity /stability issues.
...
1) Reduce the roam threshold to 5dBm to fix issues where a device might connect at -80dBM which is marginal operation, but would not roam to a -72dBm AP
2) Reduce the scan rate from 44 minutes to 5 minutes to accelerate network harmony
3) Arduino SDK was allowed to control re-connections which resulted in a de-authentication attack on teh WiFi AP. Explicitly disable with WiFi.setAutoReconnect(false);
4) Reduce WIFI_CHECK_SEC to 5, and Wifi.retry_init times to accommodate Tasmota dealing with retransmissions.
5) WifiBeginAfterScan: Save the last BSSID a connection attempt was made on. Should that error, pick the next strongest AP for the next attempt. Addresses situations where an AP has a high RSSI, but poor channel health due to it being overloaded.
6) WifiCheckIPAddrStatus: Error cases did not properly alternate between AP's, with some error cases geeting hug up where they did not initiate a reconnection so the device became non-responsive. Device now starts at Wifi.retry_init, tries to connect, does again at Wifi.retry_init/2, and then does a WifiConfig. Should no IP address be received, restart DHCP each second during this time.
Test Environment:
27 Tasmota devices
3 SonicWALL corporate AP's
Highly interfered 801.11n network
2020-01-25 11:22:40 -07:00
Hadinger
e34cc3cbcc
Change Zigbee commands renamed to ``Zb*``
2020-01-25 17:42:53 +01:00
Theo Arends
53e93215df
Fix trigger SYSTEM#BOOT
...
Fix trigger SYSTEM#BOOT when mdns is disabled an no mqqthost is set (#7552 )
2020-01-25 13:45:26 +01:00
Theo Arends
febabec3bb
Fix Gui ADC Range unit
2020-01-25 12:17:35 +01:00
RemiDing
cfbd1cb85d
optimized
2020-01-25 11:22:28 +01:00
Theo Arends
473299ffcd
Refactor rules JSON decoding
...
Refactor rules JSON decoding allowing up to 10 subtypes deep
2020-01-24 17:13:39 +01:00
Theo Arends
ddd1f4c379
Return state information when wakeup is complete
...
Return state information when wakeup is complete (#7583 )
2020-01-24 12:48:50 +01:00
Theo Arends
a4e2b28b86
Merge pull request #7587 from BASM/development
...
ds1624/ds1621: Stabilization and bug fixes
2020-01-24 11:18:54 +01:00
Federico Leoni
26755202c7
New ADC Range
2020-01-23 19:21:49 -03:00
Federico Leoni
6757d9731a
new ADC Range definition
2020-01-23 19:17:15 -03:00
Hadinger
60f5492765
Add Zigbee support for Aqara Cube rotate
2020-01-23 21:55:10 +01:00
Leonid Muravjev
b977c28435
ds1624/ds1621: Stabilization and bug fixes
...
* ds1621 datasheet is wrong for higher resolution, fixed
* ds1621 sometimes reset on bad (long) i2c bus, added autoreconfigure
* hotplug bug fixes
2020-01-23 23:45:24 +03:00
Theo Arends
3b71173a09
Add precision to Moisture sensor
...
Add precision to Moisture sensor (#7402 )
2020-01-23 18:13:32 +01:00
saper-2
e26999f300
Updated lang files with new defines + comments
2020-01-23 17:18:44 +01:00
saper-2
ad083d1675
Some code cleanup and add comments & info
2020-01-23 16:13:25 +01:00
Theo Arends
9afbf854cf
Add rule trigger on one level deeper
...
Add rule trigger on one level deeper using syntax with two ``#`` like ``on zigbeereceived#vibration_sensor#aqaracubeside=0 do ...``
2020-01-23 13:03:05 +01:00
Theo Arends
ac486f2186
Document my_image
2020-01-23 10:57:29 +01:00
Theo Arends
92a5d978de
Merge pull request #7581 from patrickdk77/development
...
make kCodeImage/my_image more customizable
2020-01-23 10:34:04 +01:00
Theo Arends
405da3ee3f
Update tasmota.ino
...
Keep hackbox commit insert possibility
2020-01-23 10:33:08 +01:00
Patrick Domack
2e89370f1e
Add ability to define more subversions in user overrides and remove ram/flash usage to store all versions.
2020-01-22 16:49:28 -05:00
Hadinger
b2c0a34979
Minor Zigbee improvements
2020-01-22 22:40:28 +01:00
Hadinger
514f3e7357
Fix ``RGBWWTable`` ignored ( #7572 )
2020-01-22 21:37:23 +01:00
Theo Arends
2f00aad103
Merge pull request #7573 from to-scho/feature/shutterbuttons_mqqt_rules
...
Shutterbutton to MQTT and rules
2020-01-22 16:15:33 +01:00
Theo Arends
7ea60116cf
Document Light commands
2020-01-22 16:14:03 +01:00
to-scho
6e81262709
Shutterbutton to MQTT and rules
2020-01-22 13:23:59 +01:00
Theo Arends
fb485dabd3
Add optional parameter <startcolor> to command ``Scheme``
...
Add optional parameter <startcolor> to command ``Scheme <scheme>, <startcolor>`` to control initial start color
2020-01-22 11:55:48 +01:00
Theo Arends
38b344fcea
Remove the need for GPIO_CSE7766_TX
2020-01-21 17:10:08 +01:00
Theo Arends
a61c028b66
Add SoftwareSerial to CSE7766 driver
...
Add SoftwareSerial to CSE7766 driver allowing different GPIOs (#7563 )
2020-01-21 16:38:55 +01:00
Theo Arends
760f4e49ac
Add compile time control over settings
2020-01-21 12:36:44 +01:00
Theo Arends
c1a86af6a8
Merge pull request #7564 from Staars/development
...
add support for LYWSD02
2020-01-21 09:17:36 +01:00
Staars
6d36f36659
add support for LYWSD02
2020-01-20 19:44:55 +01:00
Theo Arends
e01c1b8c45
Add compile time control over SetOptions
2020-01-20 18:49:57 +01:00
Theo Arends
58a50cec8c
Fix Zigbee compile error
2020-01-20 10:05:12 +01:00
Hadinger
79fdc265b7
Minor fixes to Zigbee friendly names
2020-01-19 22:59:02 +01:00
Theo Arends
588f3ca0b2
Merge pull request #7557 from BASM/7556_i2csetdevice
...
i2c: I2cSetDevice wrong behavior
2020-01-19 15:31:56 +01:00
Leonid Muravjev
e03a14ce21
i2c: I2cSetDevice wrong behavior
...
Most drivers do not expect address blocking after calling i2cSetDevice.
I2cSetActive removed from I2cSetDevice. All drivers waiting for this call are fixed.
refs #7556
2020-01-19 16:15:18 +03:00
Theo Arends
6d5b0ed622
Remove redundant code
2020-01-19 14:12:25 +01:00
Theo Arends
6c83787210
Lower mqttlog stack usage
2020-01-19 12:22:40 +01:00
Theo Arends
45ed0257b6
Better support for Prefix1 equals Prefix2
2020-01-18 16:57:48 +01:00
Theo Arends
5716d08de9
Refactor MQTT Logging and publish
2020-01-18 15:34:01 +01:00
Hadinger
18ce64f813
Add Zigbee persistence and friendly names
2020-01-18 00:02:01 +01:00
Theo Arends
50a25aeb7c
Experimental DS18x20 for Shelly
...
Experimental DS18x20 for Shelly (#7469 )
2020-01-17 17:51:27 +01:00
Theo Arends
60c5a1a83a
Merge pull request #7539 from Staars/development
...
add virtual serial port via TCP for ublox-GPS-modules
2020-01-17 17:15:33 +01:00