mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
7,083 Commits 9 Branches 110 Tags 1.2 GiB
Commit Graph

63 Commits

Author SHA1 Message Date
Theo Arends aafa0862ab Refactor LedPwm code 2020-05-23 13:09:16 +02:00
George e21cbfdc5d More sensible behaviour 
* When setting PWM values, updates all the LEDs (instant response). Uses led_power values.
* If LEDLINK not set, but LED1 is, LED1 is the status led. When turning on/off, setledlink uses digitalwrite (which does not respect the new pwm operation). In this case only, we will use the setledpoweridx instead of digitalwrite - costly (every 250ms this runs), but edge case / legacy. Allows more intuitive operation - if we blink an LED with the max and min PWM limits, we'd expect it to respect these. In this case, blink will also now update the led_power status, which keeps this accurate e.g. if ledpower 1 cmnd was sent, then blink occurred, led_state would read a 1 for that bit but the led would be off (but nothing was reading it for status so it didn't cause any trouble). Leaving digitalwrite when LEDLINK is defined as this is more efficient and the use case for pwm leds is to find buttons - link indicator would become more ambiguous for no benefit.
 2020-05-20 13:23:53 +10:00
Theo Arends d7f6c78ed9 Add command ``DeviceName`` 
Add command ``DeviceName`` defaults to FriendlyName1 and replaces FriendlyName1 in GUI
 2020-05-17 17:10:17 +02:00
Theo Arends 4aa1c18d82 Revert uart buffer size increase 
Revert uart buffer size increase but visit uart buffer reads more often to solve possible uart buffer overrun caused by sleep
 2020-05-11 16:45:22 +02:00
Theo Arends 125ee62ff3 Add Serial buffer overrun detection 
Add Serial buffer overrun detection and fix serial corruption by increasing uart serial buffer to 520
 2020-05-11 15:27:29 +02:00
Theo Arends 892be892fa Remove gpio to pin support 2020-05-01 17:37:56 +02:00
Theo Arends 5d18ad1c74 Add experimental basic support for ESP32 
- Add experimental basic support for Tasmota on ESP32 based on work by Jörg Schüler-Maroldt
- Bump version to 8.2.0.6
- This ESP32 upgrade breaks current ESP32 templates
 2020-05-01 17:30:09 +02:00
Theo Arends 7177c7d8e0 Change ESP32 pin allocation part 4 2020-05-01 16:47:41 +02:00
Theo Arends d805803daa Change pin array names 
Change pin array names to block unwanted use of direct access
 2020-04-29 14:01:02 +02:00
Theo Arends c24de18278 Change ESP32 pin allocation part 1 2020-04-28 18:27:07 +02:00
Theo Arends 60e7a73b60 Switch from GPIO array to Pin array 2020-04-28 14:42:47 +02:00
Theo Arends c9149b53c5 Change pin handling part 1 2020-04-26 17:33:27 +02:00
Theo Arends 104e3c4838 Implement ARRAY_SIZE macro 2020-04-25 11:37:36 +02:00
Theo Arends 9ed8e7c254 Fix internal array size checks 2020-04-24 17:39:26 +02:00
Theo Arends 684b7dc3a4 Update ESP32 optional brownout disable 2020-04-18 16:34:29 +02:00
Theo Arends b70ca01231 Add ESP32 optional brownout disable 
Add ESP32 brownout disable for weak onboard LDO's - eventually you'll need to change the LDO to a better one.
 2020-04-17 18:27:31 +02:00
Theo Arends e8f3d1d986 Increase ESP32 compatibility 
Increase ESP32 compatibility (breaks current ESP32 configuration again!)
 2020-04-13 17:45:06 +02:00
Theo Arends 93fd5dd618 Add experimental minimal support for ESP32 
Add experimental minimal support for ESP32 (#8110)
 2020-04-10 18:24:08 +02:00
Theo Arends a0b0c32ff4 Update references 2020-04-10 10:52:22 +02:00
Theo Arends d1b1585d1c Prep for easier preconfigurations 2020-04-09 15:32:23 +02:00
Paul C Diem d16f1a7a0f Add Light skip_light_fade flag and Dimmer3 command, Ignore MCU dimmer changes after sending dimmer command 2020-03-05 18:15:58 -06:00
Theo Arends 0ce89e53e3 Fix Arduino IDE compile error 2020-03-02 17:48:19 +01:00
Paul C Diem a550fe3ac7 Use newly allocated settings and flag 2020-02-24 16:34:45 -06:00
Paul C Diem f409d7258e Initial device groups support (power and light) 2020-02-21 09:09:21 -06:00
Theo Arends 8079ee9749 Change MQTT message size 
Change MQTT message size with additional 200 characters
 2020-02-12 18:00:53 +01:00
Theo Arends af63bb363d Add support for FiF LE-01MR energy meter 
Add support for FiF LE-01MR energy meter by saper-2 (#7584)
 2020-02-10 15:18:11 +01:00
Theo Arends ac486f2186 Document my_image 2020-01-23 10:57:29 +01:00
Theo Arends 405da3ee3f
Update tasmota.ino 
Keep hackbox commit insert possibility
 2020-01-23 10:33:08 +01:00
Patrick Domack 2e89370f1e Add ability to define more subversions in user overrides and remove ram/flash usage to store all versions. 2020-01-22 16:49:28 -05:00
Theo Arends 45ed0257b6 Better support for Prefix1 equals Prefix2 2020-01-18 16:57:48 +01:00
Theo Arends 0db458c774 Fix exception 9 restart on log message 
Fix exception 9 restart on log message in Ticker interrupt service routines NTP, Wemos and Hue emulation (#7496)
 2020-01-14 12:47:48 +01:00
Theo Arends e7b061ce5a Fix Tuya PowerOn state 
Fix Tuya PowerOn state (#7412)
 2020-01-11 15:39:56 +01:00
Theo Arends 8c2ff7237e Fix Arduino_OTA compile error 
Fix Arduino_OTA compile error (#7413)
 2020-01-03 16:50:56 +01:00
Theo Arends 8aa9109656 Happy New Year 
Happy New Year
 2019-12-31 14:23:34 +01:00
Theo Arends 1526a59162 Refactor HotPlug 2019-12-30 14:23:37 +01:00
Theo Arends df944ed058 Fix Serial initialization regression 
Fix Serial initialization regression from previous fix
 2019-12-29 13:27:48 +01:00
Theo Arends 5682675ac9 Fix some serial interface initializations 
Fix Sonoff Bridge, Sc, L1, iFan03 and CSE7766 serial interface to forced speed, config and disable logging
 2019-12-27 15:13:40 +01:00
Theo Arends ad4a7e91ac Add support for max 150 characters 
Add support for max 150 characters in most command parameter strings (#3686, #4754)
 2019-12-22 15:23:52 +01:00
Theo Arends 7459a8a424 Add restriction if fallback firmware is incompatible 
Add restriction if fallback firmware is incompatible with settings resulting in unreachable device
 2019-12-20 15:12:44 +01:00
Theo Arends aae86a6718 Add fallback functionality 
Add fallback functionality from next version 7.1.2.7
 2019-12-16 15:13:57 +01:00
Laurent Dong ee37c258e6 Embeded IF statement in backlog did not been processed 
The backlog_mutex blocked the execution of IF statement during call ExecuteCommand(), because all IF statement need to use backlog to perform commands.
 2019-12-06 10:12:13 -05:00
Theo Arends 00fd7f2f7c Bump version to 7.1.2.2 
Add command ``SerialConfig 0..23`` or ``SerialConfig 8N1`` to select Serial Config (#7108)
 2019-12-06 15:02:05 +01:00
Theo Arends 70673b8c74 Add support_tasmota 2019-12-02 10:44:27 +01:00
Theo Arends e150717e95 Restore hardware detection 2019-12-02 10:31:33 +01:00
Theo Arends 7777fa08b0 Sanitize code 2019-11-20 20:53:12 +01:00
Theo Arends 11c5947c23 Fix possible reboot loop regression 2019-11-18 11:02:04 +01:00
Theo Arends f6a7722a3c Refactor RtcReboot counter 2019-11-16 10:42:28 +01:00
Theo Arends 0636113147 Revert "Version bump 7.0.0.5" 
This reverts commit edcc17c41b.
 2019-11-15 21:30:59 +01:00
Theo Arends edcc17c41b Version bump 7.0.0.5 
Add one time flash sdk reset on initial execution solving possible SDK wifi releated issues
 2019-11-15 18:10:46 +01:00
Theo Arends 5c324357e6 Add command SetOption76 0/1 
Add command SetOption76 0/1 to enable incrementing bootcount when deepsleep is enabled (#6930)
 2019-11-15 11:50:41 +01:00