* Multilingual fixes
Some fixes for a better user experience matching every language.
* Revert frag mem
Solved problem with regional decimal conversion in language file.
As the label of the upload button is concatenated at runtime, this does not match in all languages. To solve this, there is now a full label text for `Start upgrade` and `Start restore`.
* fix shutterposition 0,-45 does not keep tilt
allow , on different config settings
* fix shutterposition 0,-45 does not maintain tilt
allow , on different config settings.
- servo fix on movement during operation. position did not behave as expected if position change before stop
- enhanced minimum change on stepper shutter depending on motordelay
* Fix for CmndHDMIAddr function.
1. Typical values for XdrvMailbox.payload are 0x1000...0x4000. Hence the
check should be (value > 0).
2. Don't overwrite the user supplied value with value read from the hardware.
* Correct the condition in CEC_Device::OnReady.
We should check for _on_ready_cb before calling _on_ready_cb.
* optimize disc write delay during shutter movement
changed to dynamic write delay to ensure no disc write on multiple shutter movement with stepper shutters.
* optimize disc write delay
ensure disc write will be postponed until all shutters stopped
* reverted back to simple version
* removed duplicate obsolete compiler options
* fix shutterfrequency change on mutiple channels
* LEDC channel management for stepper shutter
LEDC channels dynamically assigned to ensure up to 16 shutters can be defined. Number of simultaneous moving shutters is limited by number of LEDC channels.
* bugfix >=
* [WebUI] WiFi Information
Structured and more infos on WebUI Information page
* [WebUI] WiFi Info multiple lines
Divide one long line into multiple short lines
* Improvement in shuttersetup
- reduce call of energy to 10x a sec.
- stop detection more rigid to avoid wrong messages
- more accurate calculation of duration
* fix energy hickup on autosetup
* `Sendmail` upgraded to ESP-Mail-Client v3.4.9 from v1.2.0, using BearSSL instead of MbedTLS
* Fix compilation on ESP8266
* Fix compilation
* fix compilation
* Add new webcam driver over latest dev. To use the old one, define USE_WEBCAM_LAGACY
* enable build without RTSP.
check pin_pwdn before using it n 0x105!!!
* more fixes around pwdn. Make wcresolution -1 set the resoltuion setting to 'disbale cam' value (15).
* fix task stop - wait for debug to leave-> prevents guru. pin task to core 0.
* split motion from other code. Add USE_WEBCAM_MOTION to control inclusion of motion code (big hit). Change from using USE_WEBCAM_LEGACY to USE_WEBCAM_V2
* logging minimisation - behind WEBCAM_DEV_DEBUG
* add: update DEBUG_THERMOSTAT to only control the virtual switch
Also, debug output is still generated but end user can control this debug level 3
* add: debug output of main controller parameters when thermostat enabled
Also, add units for debug outputs added to make them more intelligible
* Update xdrv_39_thermostat.ino
* add: debug message when sensor is detected as not alive
fix: display thermostat number in debug messages
* add: log message prefix string for thermostat
* Update xdrv_39_thermostat.ino
fix: typos in comments
add: debug messages
* add: debug prefix for thermostat
* add: debug prefix added to output lines
* fix: comment typos and small grammatical changes for clarity
* add: debug prefix 'THE' added to debug output
* add: display PID status and key info on web output
* fix: remove extraneous comments that included unused code fragments
* add: local sensor handling improvements
add: define a local sensor name
add: define the local sensor measurement parameter
add: limit sensor not seen error message to every 60 seconds to avoid flooding the logs
add: include interval since which sensor data was last updated
fix: properly update the maximum interval time so missing sensor data is properly alerted
* Update xdrv_49_pid.ino
* add: update DEBUG_THERMOSTAT to only control the virtual switch
Also, debug output is still generated but end user can control this debug level 3
* add: debug output of main controller parameters when thermostat enabled
Also, add units for debug outputs added to make them more intelligible
* Update xdrv_39_thermostat.ino
* add: debug message when sensor is detected as not alive
fix: display thermostat number in debug messages
* add: log message prefix string for thermostat
* Update xdrv_39_thermostat.ino
fix: typos in comments
add: debug messages
* add: debug prefix for thermostat
* add: debug prefix added to output lines
* fix: comment typos and small grammatical changes for clarity
* add: debug prefix 'THE' added to debug output
* skip stop on hold if grouptopic
If shutterbutton is defined with a grouptopic send on HOLD, there is no stop on releasing the button. All shutters will move to defined position
* do not stop on hold release if group submitt
If mqtt broadcast is defined on hold then release the hold button will not anymore stop the local shutter. All shutter will move to defined position
* New LWT on deepsleep
To allow better integration into HA LWT topic will report details of sleep status:
16:54:04.388 MQT: hm/tele/ESP_3284D1/LWT =
{"Sleep":{"Time":"2023-07-17T16:55:03","Sleep":1689612844,"Wakeup":1689612903}}
* Revert LWT back to non JSON
Send DeelSleep on LWT
Send Deepsleep parameters on topic DeepSleep
* Setting default for batteryLevel
* Enable BatteryPercentSet
Changing the battery level e.g. by rule
* Added Battery % to status message
* added battery_level_percent
* Added battery % support in STATE message
* Enable setting battery level
101 is reserved for power-plug. No battery Level reported
* Setting default for battery Level
101 is reserved for power plug
0..100 normal battery values
* Revert back LWT to Offline
Removed "DeepSleep" LWT status until further decision is made. Current implementation is technical sufficient for HA to detect a battery powered device
* Added discovery message after deepsleep change
* Added discovery for battery and deepsleep
* Remove recursion into folders on Manage Files. May be enabled with UFILESYS_RECURSEFOLDERS_GUI. On Edit of a file, Save and Magane btuttons return to the folder containgint the file being edited. On delete file, UI returns to the folder that the deleted file was in.
* Make newfile put in in the current folder, and return to current folder on save of manage button.
* Add folderOnly and FileOnly functions to reduce code duplication.
Enable folder delete.
Enable folder listing to be aborted (x in browser)
Disbale ESP32 Download Task. Needs attention.
Allow folder create from newfile name.
This change will allow mqtt messages simpler by allowing something like
`publish cmnd/ir-bridge/IRHVAC {"Power": "On"}`.
The simpler format is required for working with mqtt clients like
iotMQTTPanel or similar on android.
Limitations:
- Requires full message be sent at-least once. I work around this with
a `system#boot` rule
- Gets messy with multiple devices. I have only one AC per room, and
this doesn't doesn't interfere with other IR devices.
TODO:
- [ ] Change the build flag `INCREMENTAL_IRAC`to a `SetOption`
- [ ] Persist `irac_prev_state` across reboots.
- [ ] Support multiple devices.
This reduces allocation to a single allocaiton, but also theroetically allows the Bytes object to grow if content-length was unset.
(cherry picked from commit 936477f5977dd1a4f899498cc7cc0baf05b34a89)
* remove unused variable
* Relocate SO92 implementation
This way, SO92 does not ignore SO106
* Relocate RGBWWTable implementation
This fixes a bug related to RGBWWTable and SO92.
Also, the code is tidier this way
* Cleanup: Reduce code duplication
* more consistent behaviour for SO92 and free_cw
---------
Co-authored-by: jonschz <jonschz@users.noreply.github.com>
* Add mutex to many camera functions.
* Allow stream to continue after wcinit command (and other commands which reconfigure).
* Adust retries on camera init, specifically log success if it retried.
Shorten messages to save rom.
I have seen fail of 0x103 and 0x20002 succeed on second try.
SteWers
s-hadinger
stefanbode
Christian Baars
Theo Arends
Jason2866
protectivedad
gemu
Barbudor
anishsane
Norbert
JeroenSt
chefpro
Paul Blacknell
Norbert Richter
btsimonh
msedv
xsp1989
Jacek Ziółkowski
jonschz
Subhash Chandra
blakadder
Bernhard Urban-Forster