30b821beed
tuyasen
2019-10-27 00:23:13 +02:00
e6f94fe37b
TuyaMcu: Add TuyaSend command to communicate with Tuya MCU
2019-10-25 22:31:12 +01:00
7ecc752c11
Remove command SetOption2
2019-10-22 18:34:41 +02:00
9868033654
Refactor string code
2019-10-22 17:29:21 +02:00
b072791426
Bump version 6.6.0.21
...
* Remove support for WPS and SmartConfig in favour of Web server (!) based WifiManager (#6680 )
* Remove binary sonoff-classic (#6680 )
2019-10-22 16:34:25 +02:00
a567226415
Rules: Add TuyaMcuReceived#Data=<HexBytesReceived> rule and fix SerialReceived and SSerialRecieved rules
2019-10-21 17:24:03 +01:00
833845e602
Add ZigbeeRead command and many improvements ( #6095 )
2019-10-20 16:43:50 +02:00
0b3e41d276
Uppercase USE_A4988_STEPPER
2019-10-15 14:33:37 -04:00
0092bf766c
Add Zigbee additional commands and sending messages to control devices ( #6095 )
2019-10-13 12:56:52 +02:00
01f6df9161
Add DimmerRange command and support longer dimmer ranges. Fixes #6605
...
More and more serial dimmers are coming up with different dimming ranges, implemented DimmerRange command to make this setting generic and bring support for 2 byte dimming ranges which isn't supported by SetOptions.
2019-10-10 15:53:01 +01:00
cccd777967
Add Zigbee tracking of connected devices and auto-probing of Manuf/Model Ids
2019-10-06 12:40:58 +02:00
cbb3f9e0af
Change command PulseTime JSON message
...
Change command PulseTime JSON message format and allow display of all pulsetimer information (#6519 )
2019-10-03 10:02:57 +02:00
d86cd34905
Add Zigbee more support - collect endpoints and clusters, added ZigbeeDump command
2019-09-29 15:38:26 +02:00
b7aa3cd884
Add initial support for MQTT logging
...
Add initial support for MQTT logging using command MqttLog <loglevel> (#6498 )
2019-09-27 18:13:00 +02:00
2798561bda
NRG: Show usage/export stored values when EnergyReset command is sent
2019-09-21 11:31:41 +02:00
f91f99a2e7
Zigbee support phase 3 - support for Xiaomi lumi.weather air quality sensor, Osram mini-switch
2019-09-15 11:10:59 +02:00
1341db1392
Change JSON output format for some commands
...
Change JSON output format for commands Adc, Adcs, Modules, Gpio and Gpios from list to dictionary (#6407 )
2019-09-12 14:19:44 +02:00
3a0fce2503
Add command Gpios 255/All to show all available GPIO components
...
Add command Gpios 255/All to show all available GPIO components (#6407 )
2019-09-12 12:32:33 +02:00
05e9604116
Change rename "Data" to "Hash" and limit to 32 bits when receiving UNKNOWN IR protocol (see DECODE_HASH from IRremoteESP8266)
2019-09-10 20:45:27 +02:00
4e1480d0f0
works fine...
2019-09-08 03:28:19 +02:00
e516262904
..to be tested
2019-09-07 21:37:01 +02:00
179d74ab08
it compiles...
2019-09-07 20:38:06 +02:00
5eac2dd939
Support Stepper-motors connected to A4988-stepper-driver-circuit
2019-09-07 14:03:07 +02:00
ea0fb65845
Refactor Sendmail
...
Refactor Sendmail
2019-09-05 17:19:19 +02:00
efd1870d5e
Tuya: Make Tuya Mcu implementation more configurable.
...
More and more Tuya MCU based devices are coming in the market and people requesting to support them. This patch makes Tuya module more configurable and easier to add new functionalities. Its not just a dimmer or a switch anymore.
After this Patch Tuya MCU module has a list of supported functions and the user would need to map the functionId to dpId of their device. Once mapped correctly the Tuya module will take care for handling proper function for dpId.
Currently functions supported are
1. Relays1 to 8 : FunctionID 11 to 18
2. Dimmer : FunctionID 21
3. Power ( Deca Watt ) : Function ID 31
4. Current ( milli Amps ) : Function ID 32
5. Voltage ( deca Volts ) : Function ID 33
The changes are
- Use a TuyaMCU command to map DPs to Functions instead of many different SetOptions. SetOption41, 44, 45, 46, 65 won't be needed after this patch.
- TuyaMCU command takes argument like `11,1` which means Map Function id 11 (Relay1) to DPID 1
- Migrates old settings flags and options to new TuyaMap command
2019-09-04 17:29:44 +01:00
04debb5305
Fix USE_SDM120_2 issues
...
Fix USE_SDM120_2 issues (#6282 )
2019-09-02 16:41:18 +02:00
23c3419509
Add Zigbee support phase 2 - cc2530 initialization and basic ZCL decoding
2019-08-31 21:23:32 +02:00
2d673d78ef
Add 'sonoff-ir' pre-packaged IR-dedicated firmware and 'sonoff-ircustom' to customize firmware with IR Full protocol support
2019-08-30 20:41:01 +02:00
5e962879c1
Align to new behavior for codes >64 bits
2019-08-28 22:24:40 +02:00
ab5af7bf47
Add Full support of all protocols in IRremoteESP8266, to be used on dedicated-IR Tasmota version. Warning: +81k Flash when compiling with USE_IR_REMOTE_FULL
2019-08-28 22:01:01 +02:00
c61f2cc5ec
Refactor WebSensor
...
Refactor WebSensor
2019-08-16 16:54:36 +02:00
2d0143623d
Refactor commands by processing optional prefix
...
Refactor commands by processing optional prefix
2019-08-11 18:12:18 +02:00
c9139514d0
Add ZigBee support phase 1 - low level MQTT ZNP messages for CC2530 devices
2019-08-09 22:52:33 +02:00
e0f08ec764
Add support for Solax X1 inverter by Pablo Zerón
...
Add support for Solax X1 inverter by Pablo Zerón
2019-08-09 16:42:16 +02:00
29497f7ac6
Initial Support Solax X1 Inverters
2019-08-09 12:56:01 +02:00
a50a6eff61
Change Store AWS IoT Private Key and Certificate in SPI Flash avoiding device-specific compilations
2019-08-04 19:42:21 +02:00
475f208cdc
All code moved to new file (xsnx_47_max31865.ino)
...
Code streamlined. Unused code deleted.
New "Resistance" string added to i18n to report PTD reported resistance
USE_SPI enabled in my_user_config.h
2019-07-28 19:36:22 -03:00
0df4a888d5
Support IRSend long press ('repeat' feature from IRRemoteESP8266) ( #6074 )
2019-07-15 09:22:07 +02:00
c3d2937f22
Add command Time to disable NTP and set UTC time as Epoch value if above 1451602800 (=20160101). Time 0 re-enables NTP
...
Add command Time to disable NTP and set UTC time as Epoch value if above 1451602800 (=20160101). Time 0 re-enables NTP (#5279 )
2019-07-11 14:59:28 +02:00
2b5c691041
6.5.0.16 Refactor TLS and Add visibility toggle to GUI password
...
6.5.0.16 20190611
* Refactored TLS based on BearSSL, warning breaking change for fingerprints validation (see doc)
* Add checkbox to GUI password field enabling visibility during password entry only (#5934 )
2019-06-11 14:30:07 +02:00
f9ca25755b
Add experimental light sensor code to ADC0
...
Add experimental light sensor code to ADC0. See xsns_02_analog.ino for information.
2019-05-16 18:43:23 +02:00
ad54ece2fb
6.5.0.10 Enable ADC0 by default
...
6.5.0.10 20190513
* Enable ADC0 by default in my_user_config.h (#5671 )
* Add user configurable ADC0 to Module and Template configuration compatible with current FLAG options (#5671 )
2019-05-13 15:56:01 +02:00
a454ab71de
Update LedMask info
...
- Add hexadecimal info to command LedMask
- Add LedMask to Status
2019-04-10 15:02:38 +02:00
df6645481e
6.5.0.7 Add command LedMask
...
6.5.0.7 20190410
* Add command LedMask to assign which relay has access to power LED (#5602 , #5612 )
2019-04-10 14:26:36 +02:00
be385ecb5c
Add command WebColor
...
* Add rule Http#Initialized
* Add command WebColor to change non-persistent GUI colors on the fly
Use a rule like:
rule3 on http#initialized do webcolor {"webcolor":["#eeeeee","#181818 ","#4f4f4f","#000000 ","#dddddd","#008000 ","#222222 ","#ff0000","#008000 ","#ffffff","#1fa3ec","#0e70a4","#d43535","#931f1f","#47c266","#5aaf6f","#ffffff","#999999 ","#000000 "]} endon
or
rule3 on http#initialized do webcolor {"webcolor":["#eee","#181818 ","#4f4f4f","#000 ","#ddd","#008000 ","#222 "]} endon
to make color changes persistent)
2019-04-08 22:37:39 +02:00
d375d95529
Updating to work with new web/mqtt api
2019-03-27 20:21:25 -05:00
3ad8046166
Adding HRE interface for en-GB
2019-03-27 20:21:25 -05:00
10d32acccc
Free some flash used by hass
...
Free some flash used by hass
2019-03-24 14:23:20 +01:00
dcc69bdff0
Shrink code/flash space pt.2/2
...
Shrink code/flash space pt.2/2
2019-03-23 17:57:31 +01:00
b7f89c0a8c
6.5.0.1 Change GUI data collection
...
6.5.0.1 20190319
* Change Web GUI sensor data collection
2019-03-19 17:31:43 +01:00
blakadder
Shantur Rathore
Theo Arends
Stephan Hadinger
Michael Ingraham
Shantur Rathore
pablozg
Tim Leuschner
Alberto Lopez
Jon Little