* Add command DisplayWidth to set pixel width on supported devices
* Add command DisplayHeight to set pixel height on supported devices
* Add Oled reset GPIO option "OLED reset"
- changed <br/> to <br>
- "name" attributes of input, select, textarea, button items are removed and set by their id (only if ID is set and no name tag given)
6.5.0.12 20190521
* Add AriLux RF control GPIO option "ALux IrSel" (159) replacing "Led4i" (59) for full LED control (#5709)
* Add LED GPIO option "LedLink" (157) and "LedLinki" (158) to select dedicated link status LED (#5709)
* Add support for up to four LEDs related to four power outputs. Enabled when "LedLink(i)" is configured too (#5709)
* Add extended LED power control using command LedPowerX where X is 1 to 4. Enabled when "LedLink(i)" is configured too (#5709)
6.5.0.10 20190513
* Enable ADC0 by default in my_user_config.h (#5671)
* Add user configurable ADC0 to Module and Template configuration compatible with current FLAG options (#5671)
Support subscribe/unsubscribe MQTT topics and trigger specified event with the subscribed MQTT topic.
You can subscribe a MQTT topic and assign an event name. Once we received subscribed MQTT message, an event will be automatically triggered. So you can set up a rule with "ON EVENT#<event_name> DO ..." to do whatever you want based on this MQTT message. The payload is passed as a parameter once the event been triggered. If the payload is in JSON format, you are able to get the value of specified key as parameter.
For example, if you have a Tasmota based thermostat and multiple temperature sensors in different place, usually you have to set up a centre home automation system like Domoticz to control the thermostat. Right now, with this new feature, you can write a rule to do this.
Two new commands in Rules:
1. Subscribe
Subscribe a MQTT topic (with or without key) and assign an event name to it.
Command format:
Subscribe [<event_name>, <topic> [, <key>]]
This command will subscribe a <topic> and give it an event name <event_name>.
The optional parameter <key> is for parse the specified key/value from MQTT message
payload with JSON format.
In order to parse value from two level JSON data, you can use one dot (".") to split the key into two section.
Subscribe command without any parameter will list all topics currently subscribed.
2. Unsubscribe
Unsubscribe specified MQTT event.
Command format:
Unsubscribe [<event_name>]
Unsubscribe a topic subscribed by specify the event name.
If no event specified, Unsubscribe all topics subscribed.
Examples:
1.
Subscribe BkLight, Tasmota/BackyardLight/stat/POWER
And define a rule like:
Rule1 on event#BkLight=ON do ruletimer4 60 endon
2.
Subscribe DnTemp, Tasmota/RoomSensor1/stat/SENSOR, DS18B20.Temperature
Define a rule to deal with the MQTT message like {"Time":"2017-02-16T10:13:52", "DS18B20":{"Temperature":20.6}}
Rule1 ON EVENT#DnTemp>=21 DO ... ENDON
6.4.1.8 20190107
* Change sonoff_template.h layout regarding optional module flags like ADC0
* Add command SetOption62 1 to force no Button/Switch pullup on dedicated modules. Currently only supported on Shelly2 (#4841)
* Add support for decoding Theo V2 sensors as documented on https://sidweb.nl using 434MHz RF sensor receiver
* Add support for decoding Alecto V2 sensors like ACH2010, WS3000 and DKW2012 using 868MHz RF sensor receiver
* Add support for Manzoku Power Strip (#4590)
6.3.0.17 20181211
* Add support for TheoV2 sensors as documented on https://sidweb.nl
* Add support for SDM220 (#3610)
* Enhance support for MPU6050 using DMP (#4581)
Theo Arends
gemu2015
Stephan Hadinger
pablozg
tammo0
Jon Little
Laurent
Colin Kuebler
Gabor Simon
andrethomas
Markus Past
Arthur de Beun
Dees7
Staars
Denis Taranushin
Andrei eeak
eeak
Jason2866
Joel Stein