96b66225d2
Reserve `SetOption151` for Matter protocol ( #17860 )
2023-02-02 20:22:59 +01:00
3d39efaf4a
isTuya optionnal arg to validpin ( #17835 )
2023-01-30 22:35:38 +01:00
d9cbbaeb2a
Fix energy usage and return migrated too small
...
Fix energy usage and return migrated too small (/10000) regression from v12.3.1.3
2023-01-30 15:36:46 +01:00
664b60332a
Fix broken I2C priority
...
Fix broken I2C priority regression from v12.3.1.3 (#17810 )
2023-01-29 13:59:09 +01:00
2ed602057c
Add SEN5X to I2C devices ( #17736 )
2023-01-29 08:06:25 +01:00
d70dbe979e
Prep ESP32 energy for four+ phases
2023-01-26 15:26:10 +01:00
4297fa3f3e
Add Shelly Pro 4 input interrupt support
2023-01-23 12:51:02 +01:00
88dd5f7f50
Fix Shelly Pro 4PM auto reset
2023-01-22 16:41:25 +01:00
c85003c67d
Prep Shelly Pro 4PM
2023-01-21 14:30:35 +01:00
aa78ffb733
Prep Shelly Pro 4PM
2023-01-20 14:28:58 +01:00
d904e0aa7f
Tuya - WIFI_STRENGTH + Save check on MCU_CONF ( #17724 )
...
* adding response to command 36 Get Wifi Strength
* more logs
* poperly check and warn if Mode 2 provide bad GPIOs
* final test on gpio
2023-01-17 04:46:00 +01:00
e2c9a71c3b
Prep virtual button handler
2023-01-16 18:29:51 +01:00
7a97fa4a19
Fix BMP support on two busses
...
Fix BMP support on two busses (#17643 )
2023-01-15 17:14:54 +01:00
094f45fe7e
Fix compilation without USE_IPV6
2023-01-13 11:47:58 +01:00
1a9e86a6b3
Fix ESP32 safeboot propagating upload
2023-01-13 11:30:30 +01:00
24105a74b2
Save some RAM on ESP8266
2023-01-08 17:51:17 +01:00
17d68750d9
WIP Tuya MCU Bridge driver alternative to the TuyaMCU driver ( #17626 )
...
* WIP Tuya MCU Bridge driver alternative to the TuyaMCU driver
The main difference is this driver does not try and wire MCU data points
(Dps) into the tasmota power/light/etc controls. Instead each Dp ends up
being relayed directly to MQTT and the rules subsystem. If you want to
change the state of something wired up to the MCU, you send tuyamcu
specific commands to manipulate the Dp.
Each Dp gets a type and id specific topic that is sent to MQTT. eg, Dp
id 1 type bool looks like tele/%topic%/TUYAMCUBOOL1. To change state you
send a TuyaMCUBool1 command (ie, the command index value is used as the
DpId, which is nice and symmetrical) with the new value.
Currently Rules operate on TuyaMCU#TypeDpid things, eg, "rule1 on
TuyaMCU#Bool1 do power %value% endon" toggle the power on the tasmota
device when the state of the thing on the MCU changes too.
The most obviously missing stuff at the moment is:
- better relaying of the wifi/mqtt status to the MCU
- handling wifi reset requests from the MCU
- low power stuff?
- support for sending status updates and device info queries.
- restarting the tuya mcu state machine?
- restarting the rx state machine when no bytes are rxed for a period of
time
- time sync
* shorten the log prefix to TYB (3 chars).
requested by arendst
* use the local definition for the SET_DP command.
reaching back to the existing tuyamcu code isnt reliable.
pointed out by arendst
* put the todo list in the code so it can be tracked
* check the wifi/mqtt state every second and update the mcu if it changes.
* fix rule processing when Dp state is changed from a cmnd.
rule processing was done as part of publishing the state, but publishing
the state when it was updated by a command only happened if So59 was
set. split rule processing out of publish and call them separately as
needed.
publish is now called from teleperiod, status updates from the MCU,
and from cmnds if so59 is set. rules are called from status updates from
the MCU and from cmnds.
Co-authored-by: David Gwynne <dlg@defeat.lan.animata.net>
2023-01-08 17:35:45 +01:00
9073fe01c1
Add ESP32 support for BMPxxx sensors on two I2C busses
...
Add ESP32 support for BMPxxx sensors on two I2C busses (#17643 )
2023-01-08 17:19:08 +01:00
0781192c87
Extract I2C support
...
- Fix BMP compilation on ESP8266
2023-01-08 16:04:58 +01:00
d80b763f97
Enable more than two and up to four BMP/BME sensors on two I2C buses for ESP32 (only two addresses (76, 77) per I2C bus are possible). (enhancement of #10827,#1049, #2707 ) ( #17643 )
2023-01-08 15:57:34 +01:00
95690ab1b9
Add recursive rule MQTT subscribe support ( #16943 )
2023-01-07 17:31:10 +01:00
2e7496a052
Keep webserver enabled on command ``upload``
2023-01-07 15:37:52 +01:00
5e89578403
Extend fix #17619 to non-IPv6 ( #17621 )
2023-01-06 19:03:07 +01:00
33d6dbed3d
No IP address shown when in AP moode ( #17599 ) ( #17619 )
2023-01-06 14:03:16 +01:00
dfc01cd3a4
Fix crash when getting IP address ( #17576 )
2023-01-03 09:33:31 +01:00
14ee8decf7
Update changelogs
...
Add support for PCA9632 4-channel 8-bit PWM driver as light driver by Pascal Heinrich (#17557 )
2023-01-01 14:29:41 +01:00
32a51da43d
Fix PUSH_IGNORE_INV once more
2023-01-01 14:01:18 +01:00
c63919d783
Change Energy totals max supported value
...
- Change Energy totals max supported value from +/-21474.83647 to +/-2147483.647 kWh
- Bump version to v12.3.1.3
2023-01-01 11:32:30 +01:00
e5fd35ba85
Added: Driver xdsp_20_tm1650 for I2C-based seven-segment LED controller TM1650. ( #17549 )
...
Co-authored-by: Stefan Oskamp <stefan@scinax.lan>
2022-12-31 09:19:53 +01:00
d9be488885
Update comments
2022-12-29 16:10:41 +01:00
4ee6aee35e
Fix ESP8266 relay power on spikes
...
Fix ESP8266 set GPIO's to input on power on fixing relay spikes (#17531 )
2022-12-29 14:46:34 +01:00
ff3d90c36d
Fix teleperiod PUSH_IGNORE_INV
...
Fix teleperiod PUSH_IGNORE_INV (#17028 )
2022-12-29 14:02:48 +01:00
ef4138bdaa
Support for IPv6 only networks on Ethernet (not yet Wifi) ( #17527 )
2022-12-27 21:59:34 +01:00
3555d88bee
Bump version v12.3.1.2
...
- Fix shutter default motorstop set to 0 (#17403 )
2022-12-21 15:20:33 +01:00
1cdd5c3f08
Udisplay support for rgb displays ( #17414 )
...
* add gt911
* add rgb display mode
* add gt911
* add gt911
* add gt911
* add sunton descriptor
* fix divide by zero crash with sunton
2022-12-18 14:06:04 +01:00
5048777e06
Fix IPV6 compilation on ESP8266 ( #17429 )
2022-12-17 22:41:21 +01:00
9abe7b1af9
Support for IPv6 DNS records (AAAA) and IPv6 ``Ping`` for ESP32 and ESP8266 ( #17417 )
2022-12-17 10:08:35 +01:00
fc8039d960
Adding support for ME007-ULS narrow FoV ultrasonic distance sensor ( #17376 )
...
* Squashed commit of the following:
commit 1441459a47cff0a43aa61ce47510585ee03649f3
Merge: a9fcbd342 7e27945e5d83119897eee86f01ade408921ee7d40b8d1816fd78fb
2022-12-14 11:52:26 +01:00
f429d41a32
Fix IPv6 compilation for ESP8266 ( #17374 )
2022-12-13 09:31:43 +01:00
bde58105d0
More universal way to force IPv4
2022-12-11 16:31:14 +01:00
1bdb542e50
Fix IPv4 DNS resolution when IPv6 is enabled
2022-12-11 16:24:14 +01:00
4f70f4d33e
Merge pull request #17342 from stefanbode/shutterdev
...
Code optimizatons
2022-12-11 10:49:04 +01:00
c20d789fde
Update support.ino
2022-12-10 23:54:09 +01:00
4a32623a51
IPv6 improvements
2022-12-10 13:44:16 +01:00
2f1b2ec5fd
IPv6 support for Ethernet (ESP32)
2022-12-08 19:06:51 +01:00
2a1b900775
IPv6 improvements ( #17268 )
...
* IPv6 improvements
* Fix esp8266 compilation
* grrr
* Fix compilation issue
* Fix declaration
* Fix esp32c3
2022-12-04 16:57:34 +01:00
e1221b924d
Changed removed leading spaces on commands ``(S)SerialSend1 to 6``
...
Removed leading spaces on commands ``(S)SerialSend1 to 6`` but keep on duplicate commands ``(S)SerialSend11 to 16`` (#16723 )
2022-12-04 15:09:39 +01:00
d3be3dfe8f
IPv6 preview for ESP32, also working for ESP8266
2022-11-30 19:40:58 +01:00
53563d44d8
Add support for HLK-LD2410 24GHz smart wave motion sensor
...
Add support for HLK-LD2410 24GHz smart wave motion sensor
2022-11-26 17:49:25 +01:00
87de264146
Improve mdns logging
2022-11-23 21:41:35 +01:00
06b6e31cad
Merge pull request #17147 from joba-1/rgx-fix-wifimanager-handling
...
don't touch AP_STA mode only if Rgx is up
2022-11-21 10:33:19 +01:00
4b52be6a5e
don't touch AP_STA mode only if Rgx is up
2022-11-20 16:28:59 +01:00
4f31e7a1b2
Add command ``SetOption35 0..255``
...
Add command ``SetOption35 0..255`` to skip number of received messages in Serial Bridge (default 0) (#17140 )
2022-11-20 12:52:24 +01:00
69f903618d
Fix intermittent wifi AP starts
2022-11-18 14:31:49 +01:00
16b796ccd5
Fix emulation regression from ArtNet implementation
2022-11-17 17:30:44 +01:00
34ededb9d8
Add comment for future use
2022-11-17 12:01:09 +01:00
91953e2658
Merge pull request #17103 from joba-1/rgx-preserve-ap-connections-on-sta-reconnect
...
preserve AP connections if STA side reconnects
2022-11-17 11:50:26 +01:00
a924e41ff3
Bump version v12.2.0.5
...
- Fixed ModbusBridge baudrates over 76500 baud (#17106 )
- Bump version v12.2.0.5
2022-11-17 11:44:51 +01:00
552c44425b
Merge branch 'arendst:development' into rgx-preserve-ap-connections-on-sta-reconnect
2022-11-16 19:41:59 +01:00
4eb0bf80dc
preserve AP connections if STA side reconnects
2022-11-16 17:28:03 +01:00
5f3d504c30
Add support for HMC5883L
...
Add support for HMC5883L 3-Axis Digital Compass sensor by Andreas Achtzehn (#17069 )
2022-11-15 11:11:32 +01:00
e88d1682e9
Add command ``SwitchMode 16``
...
Add command ``SwitchMode 16`` sending only MQTT message on inverted switch change (#17028 )
2022-11-15 10:10:29 +01:00
13c27194ec
TuyaMcu rewrite by btsimonh ( #17051 )
2022-11-13 12:55:18 +01:00
4e5193fdad
Remove SkipSleep() in favour of FUNC_SLEEP_LOOP
2022-11-12 15:57:46 +01:00
9b64c4eb4c
Refactor some logging
2022-11-11 14:34:58 +01:00
9ef0f2aa09
Consolidate AddLogBuffer
2022-11-11 11:47:11 +01:00
0628d2f1a5
Use `XdrvXsnsCall`
2022-11-11 11:34:32 +01:00
3731894486
Added ``FUNC_NETWORK_UP`` and ``FUNC_NETWORK_DOWN`` events
2022-11-11 11:15:05 +01:00
6f00b455e7
Add serial receive poll during sleep
...
Add serial receive poll during sleep for tuya and serial bridge
2022-11-11 09:57:00 +01:00
b7f6a7b00a
Clean up logging functions
2022-11-11 09:30:31 +01:00
986a9d10ae
Refactor serial raw data representation
2022-11-10 16:02:00 +01:00
e83882b655
Update changelogs
2022-11-10 13:54:05 +01:00
e8f24fdb6c
Update ESP8285 processor detection
2022-11-07 15:02:03 +01:00
7698178b90
Update ESP8285 device detection
2022-11-07 15:00:47 +01:00
4ebd7a9cd3
Update ESP32 processor detection
2022-11-07 12:46:24 +01:00
a469b35f02
Bump version to v12.2.0.3
2022-11-07 11:06:17 +01:00
8f920220db
Fis default sserialconfig on new installs
2022-11-06 17:41:53 +01:00
1caffb353c
Add more SO47 info
2022-11-03 17:50:47 +01:00
4e9cfc7629
Add command ``SetOption47 1..255``
...
Add command ``SetOption47 1..255`` to delay power on relay state in seconds reducing power surge
2022-11-03 17:26:54 +01:00
0632377192
Fix serial initialization
...
Fix serial initialization for baudrate and config (#16970 )
2022-11-02 11:24:24 +01:00
41b65fd6b7
Add support for two phase power calibration
...
Add support for two phase power calibration using commands ``PowerSet2``, ``VoltageSet2`` and ``CurrentSet2``
2022-10-30 11:15:17 +01:00
cef18060a0
Bump version to v12.2.0.2
...
Prepare for extended calibration and move some persistent data (PowerLow)
2022-10-26 17:59:43 +02:00
d173b93758
Fix shelly pro button double press
2022-10-24 12:21:25 +02:00
b4269d262c
Add support for Shelly Pro 1/2
...
Add support for Shelly Pro 1/2 (#16773 )
2022-10-24 11:32:10 +02:00
a9ba035474
refactor NTP fraction
2022-10-17 17:59:18 +02:00
18fdc4a176
support nanos in rtc for sync from ntp
...
so that all tm1637 6-digit clocks tick simultaneously at real second boundary.
2022-10-17 21:45:29 +08:00
169e65a922
Add ESP32 non-persistent phy selection
2022-10-15 14:33:21 +02:00
2ad018816b
Add command ``WcClock 10..200``
...
Add command ``WcClock 10..200`` set webcam clock in MHz. Default is 20
2022-10-13 17:58:16 +02:00
5cfbbd4302
Add command ``Sunrise 0..3`` to select sunrise dawn angle
...
- Bump version to v12.1.1.5
- Add command ``Sunrise 0..3`` to select sunrise dawn angle between Normal, Civil, Nautical or Astronomical (#16795 )
2022-10-12 11:02:54 +02:00
61113e6918
Fix serial on ESP32C3/S2/S3 using USB console
2022-10-10 14:21:25 +02:00
3427e1bee3
Support for Modbus Energy Monitoring devices
...
Support for Modbus Energy Monitoring devices using a rule file. See ``xnrg_29_modbus.ino`` for more information
2022-10-08 16:14:11 +02:00
da623701d7
Add support for QMC5883L magnetic induction sensor
...
Add support for QMC5883L magnetic induction sensor by Helge Scheunemann (#16714 )
2022-10-05 15:00:03 +02:00
d6b045e3d4
Do not skip leading spaces on (s)serialsend
...
Do not skip leading spaces on (s)serialsend (#16723 )
2022-10-04 18:11:36 +02:00
5a314f72e3
Add relevant program core information
2022-10-04 17:52:15 +02:00
b54c5fcb8c
Add ESP32-U4WDH single/dual core detection
2022-10-04 12:51:53 +02:00
ec964d1c9e
Add can bus sniffer
...
Add can bus sniffer based on MCP2515 (#16684 )
2022-09-29 14:31:40 +02:00
5fe2554e6a
Refactor buttons
2022-09-28 12:17:48 +02:00
f80c6c69bf
Fix ESP32-C3 compilation
2022-09-27 16:04:34 +02:00
89c1254f69
Fix ESP8266 compilation
2022-09-27 15:55:45 +02:00
f668ea44ed
Add ESP32-S2 and ESP32-S3 touch input support
2022-09-27 15:36:35 +02:00
3a4a82ba0a
Fix ESP32 touch button multi-press and hold detection
...
Fix ESP32 touch button multi-press and hold detection (#16596 )
2022-09-27 14:31:21 +02:00
2f61040891
Remove unwanted space from filename
2022-09-27 11:04:59 +02:00
e3c77331c6
Sync button_v2
2022-09-26 10:37:43 +02:00
1e0e6cd1c8
Publish CLEAR message on button HOLD release when SO73 is ON
2022-09-25 19:43:32 +01:00
96b7f79d15
Merge pull request #16563 from Jason2866/temp_no_nan
...
Temperature error messages fixed in core 2.0.5
2022-09-24 15:23:09 +02:00
0d124ee1cc
Merge pull request #16612 from ortegafernando/development
...
Setoption147 (MQTT) Disable publish SSerialReceived MQTT messages. If disabled, you must use event trigger rules instead.
2022-09-24 15:22:02 +02:00
83b3343a34
Add SetOption147
...
SetOption147 (MQTT) Disable publish SSerialReceived MQTT messages. If disabled, you must use event trigger rules instead.
If it is activated, tasmota will not publish a MQTT message every time a SSerialReceived event fires. Use rules to control "what, how and when" publish these messages.
2022-09-22 20:57:02 +02:00
cc25c1abfe
Zigbee allow spaces in names
2022-09-22 13:24:07 +02:00
f17e3440ac
Setoption147
...
Setoption147 (MQTT) Disable publish SSerialReceived MQTT messages. If disabled, you must use event trigger rules instead.
If it is activated, tasmota will not publish a MQTT message every time a SSerialReceived event fires. Use rules to control "what, how and when" publish these messages.
2022-09-21 21:42:53 +02:00
a4bf3b3ff0
Add SetOption147
...
Add SetOption147 (MQTT) Enable publish SSerialReceived MQTT messages. If disabled, use event rules instead.
If it is disabled, tasmota will not publish an MQTT message every time a SSerialReceived event fires. Use rules to control how and when publish these messages.
2022-09-21 09:35:40 +02:00
5d3ae21159
Add SetOption147
...
Add SetOption147 (MQTT) Enable publish SSerialReceived MQTT messages. If disabled, use event rules instead.
If it is disabled, tasmota will not publish an MQTT message every time a SSerialReceived event fires. Use rules to control how and when publish these messages.
2022-09-21 09:34:22 +02:00
a79ab7275c
Add SetOption147
...
Add SetOption147 (MQTT) Enable publish SSerialReceived MQTT messages. If disabled, use event rules instead.
If it is disabled, tasmota will not publish an MQTT message every time a SSerialReceived event fires. Use rules to control how and when publish these messages.
2022-09-21 09:25:23 +02:00
af6706d6e2
Add ZIGBEE_TOPIC_FNAME
2022-09-19 15:19:43 +01:00
5da6ab8f70
Temp error messages fixed
2022-09-18 12:58:48 +02:00
452c6fabb0
Tasmota Core 2.0.5
...
* Flash real size is now in core
* Flash chip magic size now in Tasmota `ESP_getFlashChipMagicSize`
* Tasmota Core 2.0.5
2022-09-17 15:53:58 +02:00
971b06ccdd
Add command ``SetOption46 0..255``
...
Add command ``SetOption46 0..255`` to add 0..255 * 10 milliseconds power on delay before initializing I/O (#15438 )
2022-09-15 17:17:16 +02:00
7e21442e96
Fix support of more touch pins ( #16518 )
2022-09-15 12:27:49 +02:00
28c343f3c8
Add HLW debug info
2022-09-11 14:58:25 +02:00
cc11ee822e
Add I2C status on I2cSetDevice
...
Add I2C status on I2cSetDevice aiding on debugging bus timeouts
2022-09-09 12:53:36 +02:00
04160106c2
Add commands DspLine and DspSpeed
...
Add commands DspLine and DspSpeed (#15856 )
2022-09-08 16:02:49 +02:00
86e45969bd
Support for DFRobot SEN0390 V30B ambient light sensor
...
Add support for DFRobot SEN0390 V30B ambient light sensor (#16105 )
2022-09-02 13:13:47 +02:00
23ba25c665
Refactor WifiHostByName()
2022-08-29 14:31:05 +02:00
b502b84189
Merge pull request #16323 from rogg/fix-local-mdns
...
Use Wifi.hostByName() for ESP8266
2022-08-29 14:15:21 +02:00
eb96127efd
allow SerialBuffer up to 2048
2022-08-28 16:49:52 +02:00
e06793eb8c
Small refactors
2022-08-27 12:28:34 +02:00
cbfd2e1db7
Put USE_SGP40 at the correct place in decode-status
...
Remove used line from support_features.ino
2022-08-26 10:07:57 -04:00
214f4bbdfd
Add support for SGP40 sensor
2022-08-25 15:51:51 -04:00
03f2e0b6e9
Use Wifi.hostByName() for ESP8266
...
Saves ~1K on ESP8266. Also, the check for resolving to 255.255.255.255 is already done by Wifi.hostByName().
2022-08-25 10:38:04 -07:00
74414d8304
re-add inverted button support in V3
2022-08-25 17:51:29 +02:00
f3e677e805
Button debouncing V3 by adopting switch debounce code ( #16339 )
...
Button debouncing V3 by adopting switch debounce code (#15867 )
2022-08-25 17:23:51 +02:00
4692b56569
Fix button delay regression from #15867
...
Fix #16319
2022-08-24 08:52:31 +02:00
0f53ae845a
Real fix, S2 shows now correct mode too
2022-08-22 16:14:20 +02:00
6d470a6429
temp fix for crash with ESP32-S2
2022-08-22 13:12:33 +02:00
7cbdd409b5
fix wrong flashmode report
2022-08-21 20:22:39 +02:00
a8f9e8d24c
Add more flash modes
2022-08-21 14:49:09 +02:00
e55e9d8485
Change flashmode from digit to text
2022-08-21 14:21:17 +02:00
4468adf4ac
Merge pull request #16275 from Staars/patch-1
...
Fix wrong flash_chip_id on ESP32, when DOUT is not used
2022-08-21 12:33:43 +02:00
e301734b2c
Fix WifiHostByName for .local
2022-08-21 11:46:43 +02:00
42399d446a
Fix wrong flash_chip_id on ESP32, when DOUT is not used
...
This also fixes the wrong reported flash size for flash modes: DIO, QUOUT and QIO. Now a global struct is used, which gets populated by the boot loader.
2022-08-21 11:15:47 +02:00
16c39aab9e
mDNS resolution for *.local fixes #16269
...
"Add user control over DNS timeout reducing blocking" c988ba1645
2022-08-20 23:17:05 -07:00
103808ce44
Add command ``StatusRetain``
...
Add command ``StatusRetain`` (#11109 )
2022-08-19 14:24:55 +02:00
14c1c5dfd4
Review changes
2022-08-19 11:27:15 +02:00
f64bddea04
S3 Temp sensor support
2022-08-18 16:10:21 +02:00
94c88df93b
Fix RTC not detected when lights are present
...
Fix RTC not detected when lights are present (#16242 )
2022-08-18 15:41:35 +02:00
1591ee7790
Red Flag GPIOs 12/13 for C3
2022-08-13 12:53:01 +02:00
20da738788
Wrap restore_powered_off_led_counter in #ifdef
2022-08-10 14:56:30 -05:00
729dc29807
Set LED state on SO87 change
2022-08-10 12:14:58 -05:00
ec3e8eb95a
Add size check
2022-08-07 16:24:59 +02:00
00012c7893
Clean up
2022-08-07 15:55:44 +02:00
fc86a63417
Fix wifiscan encryption types
...
Fix wifiscan encryption types (#16141 )
2022-08-07 15:52:23 +02:00
e327c6194f
Cleanup JSON message
2022-08-07 14:23:27 +02:00
eebf98dc59
Merge pull request #15867 from lugerun/improve-button-debounceing
...
Improve button debouncing
2022-08-07 10:57:01 +02:00
ebf0ad503c
Merge pull request #16141 from ascillato/Add_WifiScan_and_WifiTest_cmnds
...
Add `WifiScan` and `WifiTest` commands
2022-08-06 09:35:21 +02:00
02d7eb1d7d
Fix energy values after power cycle
...
Fix energy values after power cycle (#16118 )
2022-08-05 15:25:39 +02:00
058f9ecea9
Fix WifiScan JSON Response
2022-08-03 02:39:51 -07:00
922ece0959
Add WifiScan and WifiTest commands
2022-08-02 22:32:55 -07:00
ca2bc5ae70
Add new logic for wifiscan command
2022-08-02 22:31:29 -07:00
4dc6adf37f
Temp fix for ledcReadFreq()
2022-08-02 23:21:12 +02:00
abf352c8f8
Fix remapping of ledcReadFreq
2022-08-02 19:39:27 +02:00
f45cd5e905
Fixed comments and cleaned up
2022-08-02 10:07:55 +02:00
47b1f40245
Fix PWM to allow 4 different frequencies
2022-08-01 19:27:49 +02:00
722406a461
Add support for Modbus bridge
...
Add support for Modbus bridge adding commands ``ModbusSend``, ``ModbusBaudrate`` and ``ModbusSerialConfig`` (#16013 )
2022-07-20 10:41:02 +02:00
846b217427
Bump version to v12.0.2.4
...
- Bump version to v12.0.2.4
- Command ``SetOption45 1..250`` to change default bistable latching relay pulse length of 40 milliseconds (#15856 )
2022-07-16 14:32:18 +02:00
7bc67f8d18
Reset bistable relays up to detected amount of ports
2022-07-16 12:49:33 +02:00
571a2afce5
Fix bistable relay interlock
...
- Fix bistable relay interlock
- Reset bistable relay more consistent and faster (40ms instead of max 200ms)
2022-07-16 12:35:22 +02:00
8283cee823
Fix bistable relay support
2022-07-10 12:07:58 +02:00
c9d289822c
Fix bistable relays and SO63
2022-07-09 16:26:13 +02:00
cd0f9c7360
Revert "Revert "Add better support for bistable (latching) relays""
...
This reverts commit c6867ddd3d
2022-07-09 15:55:27 +02:00
c6867ddd3d
Revert "Add better support for bistable (latching) relays"
...
This reverts commit 6031e5df98
2022-07-09 14:47:36 +02:00
6031e5df98
Add better support for bistable (latching) relays
...
Add support for bistable (latching) relays mixed with monostable relays using GPIO Relay_b or Relay_bi
2022-07-09 12:27:59 +02:00
e6b4a77abd
Add ESP32 Sonoff sensor support
...
- Bump version to v12.0.2.3
- Add ESP32 SI7021, THS01 and MS01 support
- Fix THRxxD template
2022-07-06 16:58:27 +02:00
7e0f69e935
Partition Wizard use ota.tasmota.com
2022-07-02 00:13:27 +02:00
dc6aeb94c2
Filesystem escape special chars
2022-06-27 19:30:04 +02:00
ee909d4372
Sync global value update with teleperiod
...
Sync global value update with teleperiod (#15834 )
2022-06-25 17:13:53 +02:00
d6b1f1c43f
Improve button debouncing
...
Currently, there is a good debouncing implementation for the switches.
But this does not apply anymore when configuring an input as button
for the usage at a blind. Then, the current implemntation works by
just checking the input once per debounce interval. At some devices,
this causes ghost switching. As a result, this change checks the
input twice per devounce interval and uses the old values if the two
read attempts reported different values.
2022-06-25 15:37:33 +02:00
11689409fc
Add global value updates every 10 seconds
...
Add global value updates every 10 seconds (#15834 )
2022-06-23 18:13:13 +02:00
14a0370507
Fix user global entries
2022-06-23 00:06:05 +02:00
6444e5ff8f
Fix globals
2022-06-22 23:47:58 +02:00
cefe015c68
Bump version to v12.0.2.2
...
- Add commands to better control global temperature, humidity and pressure
- Command ``GlobalTemp2 1..250`` to select Global Temperature source indexed from teleperiod occurance data (#15834 )
- Command ``GlobalHum2 1..250`` to select Global Humidity source indexed from teleperiod occurance data (#15834 )
- Command ``GlobalPress2 1..250`` to select Global Pressure source indexed from teleperiod occurance data (#15834 )
2022-06-22 23:45:25 +02:00
52d868e675
Merge branch 'arendst:development' into sm2335-led-driver
2022-06-21 18:58:04 -05:00
ffcf90bdfe
Refactor sendmail
2022-06-21 16:53:58 +02:00
f76400ba03
Initial implementation of SM2335 LED driver.
2022-06-21 00:32:56 -05:00
6fac233821
Fix MQTT rc -4
...
Fix MQTT rc -4 (#15809 )
2022-06-20 14:20:35 +02:00
541be4a8ab
Add telegram DNS checks
2022-06-20 10:49:23 +02:00
b5dd23ae9f
Replace function WiFi.hostByName()
2022-06-19 18:13:26 +02:00
c988ba1645
Add user control over DNS timeout reducing blocking
...
Add command ``DnsTimeout 100..20000`` to change default DNS timeout from 1000 msec blocking if no DNS server found
2022-06-19 17:57:43 +02:00
e9708a4e5a
Fix resolving NTP and/or MQTT server
...
- Fix resolving NTP and/or MQTT server names regression from v12.0.0 (#15816 )
- Bump version to v12.0.1.1
2022-06-17 17:35:52 +02:00
6a0c4b281e
Add RTC time save
2022-06-16 16:15:54 +02:00
f10c7f06bf
Fix quick restarts future time
2022-06-15 18:44:36 +02:00
153068882c
Fix initial file timestamp
2022-06-15 17:19:38 +02:00
166e591ec9
Fix NTP sync edge cases
...
- Fix NTP sync edge cases like bad hostname and bad fixed IP address
- Change scanning all NTP server at sync time to cycle through them every minute until synced.
- Add no reply IP address for debugging
2022-06-14 18:34:51 +02:00
076019a029
Fix ESP32 wifi on command
2022-06-13 17:28:13 +02:00
8ba2733cf7
Add more redundancy to lost MQTT server
2022-06-13 11:45:09 +02:00
93bb0d23b8
Reduce blocking when DNS is unreachable
...
- Reduce blocking by adding WifiPollDns before resolving NTP and/or MQTT server names (#14394 )
- Fix ESP32 Arduino Core WiFi timeout is changed from msec to seconds
2022-06-12 14:36:25 +02:00
18f3e7738b
Revert "Add WifiPollDns to reduce blocking"
...
This reverts commit 940108c010
2022-06-12 14:31:44 +02:00
940108c010
Add WifiPollDns to reduce blocking
...
Add WifiPollDns to reduce blocking resolving NTP and/or MQTT server names (#14398 )
2022-06-12 14:29:15 +02:00
3a22874124
Increase wifi retry time ( #14394 )
...
- Increase wifi retry time (#14394 )
- Remove 1 second system hang on wifi re-connect (retry)
- Try to limit the number of seconds unresponsiveness due to wifi reconnect
2022-06-10 14:49:35 +02:00
2eefdaa0f4
Fix newline regression from this morning
2022-06-07 14:11:23 +02:00
e82058571f
Update console source info
2022-06-07 10:35:51 +02:00
41bc8bcd34
Refactor SerialBridge printf
2022-06-07 10:03:12 +02:00
s-hadinger
Barbudor
Theo Arends
Tyeth Gundry
David Gwynne
Ralph Maschotta
Stefan Oskamp
gemu
Mathias
Stephan Hadinger
stefanbode
joba-1
joba-1
Leon Poon
Miguel Cabral
ortegafernando
Adrian Deaconu
Jason2866
Jean-Pierre Deschamps
rogg
Christian Baars
Christian Baars
Paul C Diem
Adrian Scillato
lugerun
Cossid
Cossid