70a4fbd800
Add command ``SetOption159 1`` to enable counting on both rising and falling edge ( #20712 )
2024-02-14 11:22:41 +01:00
4fb9e10fcf
Add SO158
2024-02-07 16:17:11 +01:00
c2d6bbf2c1
Code admin
2024-01-10 11:13:19 +01:00
211da12342
Update feature list
2023-11-09 15:32:43 +01:00
9b5945a117
Add feature10 bitmap
2023-11-09 14:25:24 +01:00
f45b55a18b
Rectified Typos ( #19841 )
...
* Rectified Typos
* Update settings.json
2023-10-26 18:04:34 +02:00
0984c01828
Update changelogs
2023-10-13 14:50:51 +02:00
5d97a73ddf
Add ENS16x (air quality) and ENS210 (temp & RH) sensors ( #19479 )
...
* Add files via upload
Added ENS16x library enabling read-out of ENS160 and ENS161 sensor component (follow-up of CCS811 and iAQcore)
Added ENS210 library to read out ENS210 temperature & humidity sensor
* Add files via upload
Add air quality sensor readout for ENS160 and ENS161 checking two possible I2C addresses (follow up sensor for CCS811 and iAQcore)
Add temperature and humidity sensor readout checking two possible I2C addresses
* Update BUILDS.md
Add USE_ENS16x and USE_ENS210
* Update decode-status.py
Add USE_ENS16x and ENS210
* Update I2CDEVICES.md
Add USE_ENS16x and USE_ENS210
* Update my_user_config.h
Add USE_ENS16x and USE_ENS210
* Update support_features.ino
Add USE_ENS16x and USE_ENS210
* Update tasmota_configurations.h
Add USE_ENS16x and ENS210
* Update tasmota_configurations_ESP32.h
Add USE_ENS16x and USE_ENS210
* Update xsns_111_ens16x.ino
Corrected I2X number
* Update xsns_112_ens210.ino
Corrected I2C number
* Disable USE_ENS16x and USE_ENS210 by default
* Added code size information
* cut down in libs
* optimize tasmota side
* fix ens16x web display
* final fix on alternate addresses
* update code & RAM usage
---------
Co-authored-by: Barbudor <barbudor@barbudor.net>
2023-09-24 18:30:15 +02:00
3ed1bead44
Update decode-status
2023-08-26 16:20:46 +02:00
421c95a51b
Update change logs
2023-07-22 14:55:20 +02:00
b7c9182c14
Update decode-status.py to synchronize SetOption154/155 ( #19078 )
...
I noticed that the translation for SetOption154/155 bits did not match tasmota_types.h:
https://github.com/arendst/Tasmota/blob/development/tasmota/include/tasmota_types.h#L190-L191
2023-07-09 14:03:18 +02:00
ac4c4505a5
Bump version v13.0.0.2
...
Update changelogs
2023-07-08 17:37:12 +02:00
139ac367f0
Add support for energy dummy relays
...
Add support for energy dummy relays using SO48
2023-07-01 14:25:05 +02:00
eb655a4a8f
Add support for SGP41 TVOC/NOx Sensor ( #18880 )
...
* Initial support for SGP41
* Removing delay() use from SGP4x driver
* Using i18n for TVOC/NOx raw values as well
2023-06-29 09:04:08 +02:00
e05d75248e
Add undocumented feature
2023-05-25 17:13:31 +02:00
f1a9a0b45b
Add support for PCA9557
...
Add support for PCA9557 8-bit I/O expander (#18632 )
2023-05-14 15:08:09 +02:00
cda2bf157d
Add support for TC74
...
Add support for TC74 temperature sensor by Michael Loftis (#18042 )
2023-05-01 16:26:07 +02:00
6f6c43a724
Add command ``SetOption152 0/1``
...
Add command ``SetOption152 0/1`` to select two (default) or one pin bistable relay control (#18386 )
2023-04-18 17:16:29 +02:00
e07efd625f
Add support for GDK101 gamma radiation sensor by Petr Novacek ( #18390 )
2023-04-14 16:50:54 +02:00
d8bdcebc78
xsns_105_lox_o2: LOX-02 Oxygen sensor support ( #18333 )
...
* xsns_105_lox_o2: LOX-02 Oxygen sensor support
* strtof removed, ConvertTemp added
2023-04-06 09:52:15 +02:00
5661a6798f
Support for pmsa003i ( #18214 )
...
* Initial support for PMSA003I air quality sensor.
* Updated pmsa003i support to the latest dev branch
* Fixed typo in esp32 configuration
Removed all global variable and use the PM25_AQI_Data struct from Adafruit library
Fix typo Xsns100 to Xsns104
Fix Typo XI2C_71 to XI2C_78
* Move everything in custom Struct for PMSA003I driver
---------
Co-authored-by: Jean-Pierre Deschamps <info@jpdeschamps.com>
2023-03-20 09:52:22 +01:00
9f30836854
Add support for multiple MCP23017 as switch/button/relay
2023-03-01 10:12:47 +01:00
8bc03bbc06
Bump version v12.3.1.6
...
- Add ESP32 preliminary support for Matter protocol, milestone 1 (commissioning) by Stephan Hadinger
- Add basic support for Shelly Pro 4PM
2023-02-05 14:29:42 +01:00
5025e86d75
Meaning of SetOption15 swapped ( #17884 )
...
Noticed that the text incorrectly said value 1 for direct PWM control, and 0 for the default as a light.
2023-02-05 13:34:02 +01:00
db581b15c7
Add SetOption150
...
Add SetOption150 - (Energy) Force no voltage/frequency common allowing individual voltage channel calibration.
2023-01-31 22:30:50 +01:00
2ed602057c
Add SEN5X to I2C devices ( #17736 )
2023-01-29 08:06:25 +01:00
17d68750d9
WIP Tuya MCU Bridge driver alternative to the TuyaMCU driver ( #17626 )
...
* WIP Tuya MCU Bridge driver alternative to the TuyaMCU driver
The main difference is this driver does not try and wire MCU data points
(Dps) into the tasmota power/light/etc controls. Instead each Dp ends up
being relayed directly to MQTT and the rules subsystem. If you want to
change the state of something wired up to the MCU, you send tuyamcu
specific commands to manipulate the Dp.
Each Dp gets a type and id specific topic that is sent to MQTT. eg, Dp
id 1 type bool looks like tele/%topic%/TUYAMCUBOOL1. To change state you
send a TuyaMCUBool1 command (ie, the command index value is used as the
DpId, which is nice and symmetrical) with the new value.
Currently Rules operate on TuyaMCU#TypeDpid things, eg, "rule1 on
TuyaMCU#Bool1 do power %value% endon" toggle the power on the tasmota
device when the state of the thing on the MCU changes too.
The most obviously missing stuff at the moment is:
- better relaying of the wifi/mqtt status to the MCU
- handling wifi reset requests from the MCU
- low power stuff?
- support for sending status updates and device info queries.
- restarting the tuya mcu state machine?
- restarting the rx state machine when no bytes are rxed for a period of
time
- time sync
* shorten the log prefix to TYB (3 chars).
requested by arendst
* use the local definition for the SET_DP command.
reaching back to the existing tuyamcu code isnt reliable.
pointed out by arendst
* put the todo list in the code so it can be tracked
* check the wifi/mqtt state every second and update the mcu if it changes.
* fix rule processing when Dp state is changed from a cmnd.
rule processing was done as part of publishing the state, but publishing
the state when it was updated by a command only happened if So59 was
set. split rule processing out of publish and call them separately as
needed.
publish is now called from teleperiod, status updates from the MCU,
and from cmnds if so59 is set. rules are called from status updates from
the MCU and from cmnds.
Co-authored-by: David Gwynne <dlg@defeat.lan.animata.net>
2023-01-08 17:35:45 +01:00
14ee8decf7
Update changelogs
...
Add support for PCA9632 4-channel 8-bit PWM driver as light driver by Pascal Heinrich (#17557 )
2023-01-01 14:29:41 +01:00
20a50ffc2e
Revert Tuya rewrite
...
- Update changelogs
2022-12-31 16:08:59 +01:00
fc8039d960
Adding support for ME007-ULS narrow FoV ultrasonic distance sensor ( #17376 )
...
* Squashed commit of the following:
commit 1441459a47cff0a43aa61ce47510585ee03649f3
Merge: a9fcbd342 7e27945e5d83119897eee86f01ade408921ee7d40b8d1816fd78fb
2022-12-14 11:52:26 +01:00
53563d44d8
Add support for HLK-LD2410 24GHz smart wave motion sensor
...
Add support for HLK-LD2410 24GHz smart wave motion sensor
2022-11-26 17:49:25 +01:00
5f3d504c30
Add support for HMC5883L
...
Add support for HMC5883L 3-Axis Digital Compass sensor by Andreas Achtzehn (#17069 )
2022-11-15 11:11:32 +01:00
e83882b655
Update changelogs
2022-11-10 13:54:05 +01:00
a469b35f02
Bump version to v12.2.0.3
2022-11-07 11:06:17 +01:00
3427e1bee3
Support for Modbus Energy Monitoring devices
...
Support for Modbus Energy Monitoring devices using a rule file. See ``xnrg_29_modbus.ino`` for more information
2022-10-08 16:14:11 +02:00
da623701d7
Add support for QMC5883L magnetic induction sensor
...
Add support for QMC5883L magnetic induction sensor by Helge Scheunemann (#16714 )
2022-10-05 15:00:03 +02:00
ec964d1c9e
Add can bus sniffer
...
Add can bus sniffer based on MCP2515 (#16684 )
2022-09-29 14:31:40 +02:00
6bfb9d6aa4
Update changelogs
2022-09-24 16:53:11 +02:00
86e45969bd
Support for DFRobot SEN0390 V30B ambient light sensor
...
Add support for DFRobot SEN0390 V30B ambient light sensor (#16105 )
2022-09-02 13:13:47 +02:00
684584a5e5
Command ``SetOption146 1`` to enable display of ESP32 internal temperature
2022-09-02 11:24:47 +02:00
cbfd2e1db7
Put USE_SGP40 at the correct place in decode-status
...
Remove used line from support_features.ino
2022-08-26 10:07:57 -04:00
214f4bbdfd
Add support for SGP40 sensor
2022-08-25 15:51:51 -04:00
103808ce44
Add command ``StatusRetain``
...
Add command ``StatusRetain`` (#11109 )
2022-08-19 14:24:55 +02:00
2cdfcf5345
Update changelog and templates
2022-08-11 14:47:31 +02:00
202ec86453
Update changelogs
2022-08-05 15:52:53 +02:00
d475ccd5c5
Update decode-status.py
2022-07-25 10:00:12 +02:00
722406a461
Add support for Modbus bridge
...
Add support for Modbus bridge adding commands ``ModbusSend``, ``ModbusBaudrate`` and ``ModbusSerialConfig`` (#16013 )
2022-07-20 10:41:02 +02:00
846b217427
Bump version to v12.0.2.4
...
- Bump version to v12.0.2.4
- Command ``SetOption45 1..250`` to change default bistable latching relay pulse length of 40 milliseconds (#15856 )
2022-07-16 14:32:18 +02:00
e6b4a77abd
Add ESP32 Sonoff sensor support
...
- Bump version to v12.0.2.3
- Add ESP32 SI7021, THS01 and MS01 support
- Fix THRxxD template
2022-07-06 16:58:27 +02:00
f76400ba03
Initial implementation of SM2335 LED driver.
2022-06-21 00:32:56 -05:00
Theo Arends
Dellucifer
Christoph Friese
sfromis
Andrew Klaus
Anton ACE
Jean-Pierre Deschamps
Tyeth Gundry
David Gwynne
Mathias
Jean-Pierre Deschamps
Cossid