Theo Arends
36cbca9004
Add updated user config
2024-03-23 15:21:16 +01:00
s-hadinger
130c3f83f1
LVGL add helper functions ( #20968 )
2024-03-16 23:50:03 +01:00
fb-pilot
f7ae60a9e4
expand xsns_100_ina3221 to optionaly calculate the charge and / or Energy per chanel ( #20915 )
...
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Update en_GB.h
* Update xsns_100_ina3221.ino
* Add files via upload
* Add files via upload
I hope I have all details now changed ;-))
* Add files via upload
I still found a little detail to beutify ;-)
2024-03-12 08:12:22 +01:00
s-hadinger
268fad6d0d
LVGL remove `textarea` and `spinbox` from binaries ( #20916 )
2024-03-10 20:52:16 +01:00
Ryan Castellucci
10fff01c80
add failsafe for compiled in tls fingerprints ( #20865 )
2024-03-04 08:52:47 +01:00
s-hadinger
27ccf0490b
HASPmota support for spangroup (styled text) ( #20852 )
2024-03-03 10:53:21 +01:00
s-hadinger
54b1a94379
Drop support for old (insecure) fingerprint format ( #20842 )
2024-03-01 12:24:48 +01:00
Theo Arends
77cba87994
Update changelogs
2024-02-27 14:16:13 +01:00
Bastian Urschel
bf91af0c07
add support for ams5915 and ams6915 temerature and pressure sensors ( #20814 )
...
* add support for ams5915 and ams6915 temerature and pressure sensors
* improved function namings
* optimized detection of sensor
* set verbosity level to debug
* minor code cleanings
* added seconds-counter to minimize i2c bus load, minor code cleanups
* add meas_valid in sensor struct to differentiate between sensor present (at tasmota boot) and measurement valid (if sensor was reattached) at runtime
* removed global struct and sensor_present, introduced dynamic memory allocation if sensor is present at startup, minor code changes
* fixes missing initialisation of variable
* corrected the amount of used memory if compiled with AMSX915 support
* Update my_user_config.h
disable AMSx915 by default
---------
Co-authored-by: baschdello <urschelb@rhrk.uni-kl.de>
Co-authored-by: Bastian <bastianurschel@gmail.com>
2024-02-26 23:04:25 +01:00
Theo Arends
fb003e006e
Add Show calculated heat index if temperature and humidity is available with ``#define USE_HEAT_INDEX`` ( #4771 )
2024-02-18 18:00:41 +01:00
Felipe Martínez
d77cf7d2f0
Support LWT messages when using TASMESH ( #20392 )
...
* Send LWTs when nodes come online and offline
* Use string macro
* Add a TASMESH_HEARTBEAT config
* Add flags to config file
* Fix missing break in case
* Rename heartbeat feature define
* Comment out tasmesh settings
* Detect online peers on all packets, not just heartbeats
2024-02-18 15:28:00 +01:00
Theo Arends
d8d1b1d131
Add QMC5883l check for overflow and scale reading ( #20643 )
2024-02-18 15:24:21 +01:00
Fulvio Spelta
ab8676d865
SetOption158 publish/suppress ModbusReceived MQTT messages ( #20678 )
2024-02-07 15:57:09 +01:00
Theo Arends
6cfe979f1b
Enable GPIO viewer on ESP32
2024-02-05 15:09:49 +01:00
s-hadinger
ff6be70ce1
LVGL library updated to v9.0.0, some small breaking changes in C, none in HASPmota ( #20659 )
...
* LVGL library updated to v9.0.0, some small breaking changes in C, none in HASPmota
* fix compilation
* Move lvgl_berry to LVGL_assets
2024-02-05 12:07:41 +01:00
Theo Arends
af9d4cadd8
GPIO Viewer update from 1.0.7 to 1.5.0
2024-01-27 23:58:00 +01:00
Theo Arends
cce5204177
Refactored rules USE_EXPRESSION and SUPPORT_IF_STATEMENT replacing LinkedList with arrays and enabled by default
2024-01-24 14:33:55 +01:00
Theo Arends
10885fe60d
Refactored rules ``Subscribe`` using LList allowing full message size and enabled by default
2024-01-22 16:57:59 +01:00
Theo Arends
0595130fcf
Update my_user_config.h
2024-01-18 16:52:24 +01:00
Theo Arends
c9d0106007
Removed max number of 30 backlog entries
2024-01-18 16:32:28 +01:00
Simon Post
12ef60a3df
Modification of convert.py and preprocessor.py to add tabview, list and tileview. Plus fix lv.keyboard enum error ( #20513 )
...
* Modification of convert.py and preprocessor.py to add tabview, list and tileview. Plus fix lv.keyboard enum error
* Amended my_user_config.h per request
---------
Co-authored-by: Simon Post <admin@SimonM3MacbookPro.theposts.me>
2024-01-17 13:24:43 +01:00
s-hadinger
8d83472c01
LVGL option to add `lv.keyboard` extra widget ( #20496 )
...
* LVGL option to add `lv.keyboard` extra widget
* Don't include keyboard by default
2024-01-14 22:37:07 +01:00
Theo Arends
3e3bfccb58
Bump version v13.3.0.3
2024-01-12 12:17:31 +01:00
Theo Arends
f30f3f8016
Add user control over GPIOViewer sampling interval
2024-01-10 15:51:19 +01:00
Theo Arends
ebe840eba5
Update changelogs
2024-01-08 09:40:10 +01:00
s-hadinger
aa1dd392ca
Add Button to dynamically load GPIO Viewer with Berry backend ( #20424 )
2024-01-08 09:30:18 +01:00
Barbudor
7c290388d9
Sonoff Basic R4 Magic switch ( #20247 )
...
* magic switch take 1
* good to go
* good to go
* final, including in tasmota32c3
2023-12-16 18:23:51 +01:00
Jason2866
58f50045d9
Add the possibility to set global compile time settings ( #20013 )
2023-11-14 16:36:09 +01:00
s-hadinger
de1b5929b8
Partition Wizard can be loaded dynamically ( #19980 )
...
* Partition Wizard can be loaded dynamically
* Centralize config
* Don't display duplicate buttons
* Fix test
2023-11-11 23:52:41 +01:00
Norbert Richter
c88b773dd3
Neopool enhancements ( #19973 )
...
* Add NeoPool sensor delta trigger
* Add NeoPool store settings in unified file system
* Add NeoPool command NPBoost
2023-11-11 11:49:40 +01:00
sfromis
ab420b6cc1
DS18x20_USE_ID_AS_NAME in my_user_config.h ( #19777 )
...
Add mention of #define DS18x20_USE_ID_AS_NAME
2023-10-17 11:00:39 +02:00
Paul Blacknell
f41e525f5a
fix: account for MAX17043 alert status on start ( #19708 )
2023-10-09 16:14:41 +02:00
Christoph Friese
5d97a73ddf
Add ENS16x (air quality) and ENS210 (temp & RH) sensors ( #19479 )
...
* Add files via upload
Added ENS16x library enabling read-out of ENS160 and ENS161 sensor component (follow-up of CCS811 and iAQcore)
Added ENS210 library to read out ENS210 temperature & humidity sensor
* Add files via upload
Add air quality sensor readout for ENS160 and ENS161 checking two possible I2C addresses (follow up sensor for CCS811 and iAQcore)
Add temperature and humidity sensor readout checking two possible I2C addresses
* Update BUILDS.md
Add USE_ENS16x and USE_ENS210
* Update decode-status.py
Add USE_ENS16x and ENS210
* Update I2CDEVICES.md
Add USE_ENS16x and USE_ENS210
* Update my_user_config.h
Add USE_ENS16x and USE_ENS210
* Update support_features.ino
Add USE_ENS16x and USE_ENS210
* Update tasmota_configurations.h
Add USE_ENS16x and ENS210
* Update tasmota_configurations_ESP32.h
Add USE_ENS16x and USE_ENS210
* Update xsns_111_ens16x.ino
Corrected I2X number
* Update xsns_112_ens210.ino
Corrected I2C number
* Disable USE_ENS16x and USE_ENS210 by default
* Added code size information
* cut down in libs
* optimize tasmota side
* fix ens16x web display
* final fix on alternate addresses
* update code & RAM usage
---------
Co-authored-by: Barbudor <barbudor@barbudor.net>
2023-09-24 18:30:15 +02:00
s-hadinger
c6938e2048
Reduce IRAM consumption of HDMI CEC to 1453 bytes ( #19452 )
...
* Reduce IRAM consumption of HDMI CEC to 1453 bytes
* Add changelog
2023-09-03 23:15:33 +02:00
s-hadinger
f4b3574ed4
Berry fast_loop is now called every 5ms whatever the Sleep value ( #19436 )
2023-09-02 11:10:50 +02:00
s-hadinger
f7c4c16a9c
Support for HDMI CEC protocol ( #19434 )
2023-09-01 21:46:18 +02:00
Paul Blacknell
be88e701d9
Add commands to allow setting of timeprop parameters ( #19310 )
...
* add: commands to set timeprop settings
* Update my_user_config.h
* fix: properly generated json response to commands
2023-08-15 09:43:55 +02:00
Theo Arends
978a21240c
Update changelogs
2023-07-24 15:30:48 +02:00
Theo Arends
f626539c18
Refactor MAX17043 driver
2023-07-24 12:29:43 +02:00
Theo Arends
421c95a51b
Update change logs
2023-07-22 14:55:20 +02:00
Vincent de Groot
bc41500d9c
MAX17043 sensor integration ( #18788 )
...
* Restart MAX17043 from the scratch
* revert change
* Changed battery capacity in charge (capacity is the Ah value of the battery, this degrades over time when battery ages)
* merge
* Changing xsns_109 to 110
* fix nr
* removed old xsns109
* Update I2CDEVICES.md
* clean-up usage of Interface
2023-07-22 13:33:47 +02:00
Theo Arends
465ae023ab
Update change logs
2023-06-29 14:10:49 +02:00
Theo Arends
0930bbddf5
Fix ESP32 Matter support
2023-06-26 12:38:29 +02:00
s-hadinger
61f17221d0
Berry simplify I2S implementation ( #18778 )
2023-06-02 16:36:09 +02:00
Theo Arends
f1a9a0b45b
Add support for PCA9557
...
Add support for PCA9557 8-bit I/O expander (#18632 )
2023-05-14 15:08:09 +02:00
f-reiling
3a6cd9b63c
start modus tcp bridge automatically ( #18634 )
...
* added default port for modbus tcp bridge to start automatically
* updated ifdef style
* renamed define for modbus default port
2023-05-10 14:38:52 +02:00
Jeroen
632176765d
Added define to adjust calibration precision. ( #18613 )
...
Co-authored-by: JeroenSt <nospam@nospam.org>
2023-05-10 09:38:27 +02:00
Theo Arends
91523fd90b
Add GM861 optional heartbeat
2023-05-07 16:01:33 +02:00
Theo Arends
0287291cd9
Add GM861 optional AIMId decode
2023-05-07 14:11:29 +02:00
Theo Arends
d7b6d72e19
Add support for GM861
...
- Add support for GM861 1D and 2D bar code reader (#18399 )
- Bump version to v12.5.0.2
2023-05-05 16:50:19 +02:00
Theo Arends
cda2bf157d
Add support for TC74
...
Add support for TC74 temperature sensor by Michael Loftis (#18042 )
2023-05-01 16:26:07 +02:00
Jason2866
c33472d9b6
ArduinoOTA support only ESP8266 ( #18528 )
...
* ArduinoOTA support only ESP8266
* add comment ArduinoOTA
2023-04-27 14:19:27 +02:00
Szewcson
4fdd1ad94d
Ftlab gdk101 Gamma Radiation Sensor Module support ( #18390 )
...
* Support for GDK101.
* GDK101 driver rework
---------
Co-authored-by: PetrNovacek <39201428+r21m@users.noreply.github.com>
2023-04-14 15:29:00 +02:00
Anton ACE
d8bdcebc78
xsns_105_lox_o2: LOX-02 Oxygen sensor support ( #18333 )
...
* xsns_105_lox_o2: LOX-02 Oxygen sensor support
* strtof removed, ConvertTemp added
2023-04-06 09:52:15 +02:00
Theo Arends
b321fab868
Refactor PCF8574 driver
2023-03-27 15:42:40 +02:00
Theo Arends
1e1c536a50
Consolidate Energy Column Gui
2023-03-25 15:16:06 +01:00
Theo Arends
34ee7c67d8
Update changelogs
...
- Add support for PMSA003I Air Quality Sensor by Jean-Pierre Deschamps (#18214 )
- Add support for DingTian virtual switch/button/relay (#18223 )
2023-03-20 10:21:16 +01:00
Jean-Pierre Deschamps
5661a6798f
Support for pmsa003i ( #18214 )
...
* Initial support for PMSA003I air quality sensor.
* Updated pmsa003i support to the latest dev branch
* Fixed typo in esp32 configuration
Removed all global variable and use the PM25_AQI_Data struct from Adafruit library
Fix typo Xsns100 to Xsns104
Fix Typo XI2C_71 to XI2C_78
* Move everything in custom Struct for PMSA003I driver
---------
Co-authored-by: Jean-Pierre Deschamps <info@jpdeschamps.com>
2023-03-20 09:52:22 +01:00
Barbudor
948a82d75e
Add virtual Buttons & Switches in Digtian driver ( #18223 )
...
* add support for virtual buttons or switches
* remove DINGTIAN key from SENSOR when using buttons-switches
2023-03-19 20:19:48 +01:00
Jason2866
881c4f4a85
fix `OTA_URL` Safe Guard
2023-03-03 12:34:20 +01:00
Theo Arends
a72bbbe30a
Add interrupt control to MCP23xxx driver
...
- Add interrupt control to MCP23xxx driver
- Enable ADE7880 in tasmota32.bin
2023-03-02 11:24:54 +01:00
Jason2866
84442dcd39
OTA_URL safeguard ( #18010 )
2023-02-20 22:36:34 +01:00
Jason2866
d2f450316c
Set correct OTA URL for all Tasmota build env ( #18008 )
...
* OTA URL Part 1
* typo
* OTA URL Part 2
* OTA URL Part 3
* fix s2 safeboot
* formatting
* rm whitespace
* more beautify
* last whitespace
2023-02-20 15:21:24 +01:00
s-hadinger
dcbf50a918
Matter automatic ifdefs ( #18002 )
2023-02-19 22:25:29 +01:00
Theo Arends
289703c97a
Update my_user_config.h
2023-02-06 16:03:50 +01:00
David Smith
19d5a363e1
Multicast address typo in my_user_config.h ( #17816 )
...
For ArtNet Multicast address the defined value and the value in the comment are different.
2023-01-29 08:48:23 +01:00
Tyeth Gundry
2ed602057c
Add SEN5X to I2C devices ( #17736 )
2023-01-29 08:06:25 +01:00
Barbudor
db0532de5f
ds3231 temperature sensor ( #17778 )
2023-01-24 08:52:43 +01:00
Theo Arends
24105a74b2
Save some RAM on ESP8266
2023-01-08 17:51:17 +01:00
David Gwynne
17d68750d9
WIP Tuya MCU Bridge driver alternative to the TuyaMCU driver ( #17626 )
...
* WIP Tuya MCU Bridge driver alternative to the TuyaMCU driver
The main difference is this driver does not try and wire MCU data points
(Dps) into the tasmota power/light/etc controls. Instead each Dp ends up
being relayed directly to MQTT and the rules subsystem. If you want to
change the state of something wired up to the MCU, you send tuyamcu
specific commands to manipulate the Dp.
Each Dp gets a type and id specific topic that is sent to MQTT. eg, Dp
id 1 type bool looks like tele/%topic%/TUYAMCUBOOL1. To change state you
send a TuyaMCUBool1 command (ie, the command index value is used as the
DpId, which is nice and symmetrical) with the new value.
Currently Rules operate on TuyaMCU#TypeDpid things, eg, "rule1 on
TuyaMCU#Bool1 do power %value% endon" toggle the power on the tasmota
device when the state of the thing on the MCU changes too.
The most obviously missing stuff at the moment is:
- better relaying of the wifi/mqtt status to the MCU
- handling wifi reset requests from the MCU
- low power stuff?
- support for sending status updates and device info queries.
- restarting the tuya mcu state machine?
- restarting the rx state machine when no bytes are rxed for a period of
time
- time sync
* shorten the log prefix to TYB (3 chars).
requested by arendst
* use the local definition for the SET_DP command.
reaching back to the existing tuyamcu code isnt reliable.
pointed out by arendst
* put the todo list in the code so it can be tracked
* check the wifi/mqtt state every second and update the mcu if it changes.
* fix rule processing when Dp state is changed from a cmnd.
rule processing was done as part of publishing the state, but publishing
the state when it was updated by a command only happened if So59 was
set. split rule processing out of publish and call them separately as
needed.
publish is now called from teleperiod, status updates from the MCU,
and from cmnds if so59 is set. rules are called from status updates from
the MCU and from cmnds.
Co-authored-by: David Gwynne <dlg@defeat.lan.animata.net>
2023-01-08 17:35:45 +01:00
s-hadinger
d59caa7203
Berry ``crypto.AES_CCM`` (required by Matter protocol) ( #17586 )
2023-01-03 20:26:46 +01:00
Theo Arends
404589c860
Enable USE_WE517 in tasmota32.bin
2023-01-02 11:38:08 +01:00
Theo Arends
14ee8decf7
Update changelogs
...
Add support for PCA9632 4-channel 8-bit PWM driver as light driver by Pascal Heinrich (#17557 )
2023-01-01 14:29:41 +01:00
kaedwen
25b4040283
Light driver for PCA9632 ( #17557 )
...
* added PCA9632 driver
* compiling
* added BUILD and DEVICES section
* added PCA9632 module
* use I2C_SDA/SCL
* light driver working
* bulk write and pin mapping
* remove debugging
* remove debugging
* adjust comments
Co-authored-by: Pascal Heinrich <kaedwen@heinrich.blue>
2023-01-01 14:02:22 +01:00
Theo Arends
20a50ffc2e
Revert Tuya rewrite
...
- Update changelogs
2022-12-31 16:08:59 +01:00
Barbudor
99d33e3023
PCF8574 Overridable address ranges ( #17539 )
...
* pcf8574 overridable address ranges
* fix comment
* better test on USE_MCP230xx
* missing change
2022-12-29 21:55:28 +01:00
s-hadinger
790b6feae6
Change NTP default servers to dual-stack (IPv4/IPv6) ( #17525 )
2022-12-27 20:59:56 +01:00
s-hadinger
1832c4b2f0
Berry crypto add ``SPAKE2P_Matter`` for Matter support ( #17497 )
2022-12-23 19:40:12 +01:00
s-hadinger
f5f7ff4fb8
Minor changes to Berry crypto ( #17494 )
2022-12-23 18:31:19 +01:00
s-hadinger
42e3862970
Berry hkdf ( #17487 )
...
* Berry crypto add `HKDF_HMAC_SHA256`
* add HKDF option
2022-12-22 22:39:06 +01:00
s-hadinger
f06c07996c
Berry crypto add ``EC_P256`` and ``PBKDF2_HMAC_SHA256`` algorithms required by Matter protocol ( #17473 )
2022-12-22 10:09:13 +01:00
s-hadinger
d670f476ba
Berry add crypto AES_CTR, HDMAC_SHA256, MD5 ( #17451 )
2022-12-19 22:30:54 +01:00
s-hadinger
30ace5a3f3
Berry support for `crypto.SHA256` ( #17430 )
2022-12-17 23:38:57 +01:00
s-hadinger
5048777e06
Fix IPV6 compilation on ESP8266 ( #17429 )
2022-12-17 22:41:21 +01:00
Jason2866
6658c8d269
use `https` for esp32x for OTA ( #17404 )
2022-12-15 18:17:39 +01:00
Theo Arends
1ad8b7713e
Add support for ME007-ULS
...
Add support for ME007-ULS narrow FoV ultrasonic distance sensor by Mathias Buder (#17376 )
2022-12-14 12:18:49 +01:00
Mathias
fc8039d960
Adding support for ME007-ULS narrow FoV ultrasonic distance sensor ( #17376 )
...
* Squashed commit of the following:
commit 1441459a47cff0a43aa61ce47510585ee03649f3
Merge: a9fcbd342 7e27945e5
Author: Mathias Buder <mathias_buder@bose.com>
Date: Tue Dec 13 09:00:06 2022 +0100
Merge branch 'development' into me007-narrow-fov-ultrasonic-sensor
commit a9fcbd3428445eb914816f608e064568d16b41e9
Merge: 7bb1049f5 d83119897
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Mon Dec 12 10:33:06 2022 +0100
Merge branch 'development' into me007-narrow-fov-ultrasonic-sensor
commit 7bb1049f51da8d064462b9499ed479a7675b368e
Merge: 83a5afa7a eee86f01a
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Fri Dec 9 09:30:29 2022 +0100
Merge remote-tracking branch 'github/development' into me007-narrow-fov-ultrasonic-sensor
commit 83a5afa7ad27fcde1e67008e41a9bfd9c680cccd
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Thu Dec 8 14:47:13 2022 +0100
[ME007] Added driver version number to MQTT message, small delay between consecutive measurement
commit 9b8667843154f02a23020e655d806ed76ae2e530
Merge: 39180f345 de408921e
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Thu Dec 8 10:12:45 2022 +0100
Merge branch 'development' into me007-narrow-fov-ultrasonic-sensor
commit 39180f3451fce5f06504195faea0124d73dac1ee
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Wed Dec 7 16:41:26 2022 +0100
[ME007] Added median filter
commit 01b68e0e6ca147ac03b63b8c71d035563e3bf13b
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Mon Dec 5 23:08:57 2022 +0100
[ME007] Simplified state maschine within me007_measure()
commit 1c74c6ed3e4097f09792a48420b2016c92e10353
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Mon Dec 5 22:21:16 2022 +0100
[ME007] Fixed issues from previous pull-request
commit 25b667120fd8d70fcfed36de44f1b7a17d0686be
Merge: 01e0b1809 e7d40b8d1
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Mon Dec 5 10:46:25 2022 +0100
Merge branch 'development' into me007-narrow-fov-ultrasonic-sensor
# Conflicts:
# tasmota/include/tasmota_template.h
commit 01e0b18096bfffc67673e25152114694caaf110a
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Sun Dec 4 20:53:39 2022 +0100
[ME007] Minor changes
commit ec00c9b85d223b78586c464bb92d1c7894357a40
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Fri Dec 2 13:08:06 2022 +0100
[ME007] Added some measurement error statistics
commit c5cf65f82c42195752a88fd1553c74ab68c39cb2
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Thu Dec 1 22:38:07 2022 +0100
[ME007] Fixed MQTT message
commit ae07d8dd77db47e20578f655ec057a63b30e65ce
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Thu Dec 1 21:56:20 2022 +0100
[ME007] Minor code refactoring
commit d2b43ca70c716e1b637b9efd3b536506233e5365
Merge: 292f5f6c8 816fd78fb
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Thu Dec 1 16:48:38 2022 +0100
Merge branch 'development' into me007-narrow-fov-ultrasonic-sensor
commit 292f5f6c81f1659eb225271cdd025eb77da02c6f
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Thu Dec 1 16:47:03 2022 +0100
[ME007] Added logic to detect sensor at boot and during runtime
commit f17af404fee76bf63b30ed3c9d2175c4e01c03ca
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Thu Dec 1 12:32:19 2022 +0100
[ME007] Added missing define into language files
commit 7a271abeca36139a43ef96bd461d46ba0c662901
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Thu Dec 1 12:19:23 2022 +0100
[ME007] Improved snesor measuremnt function
commit fe42ebd1124e2246e4d7afd63c905c251e084b27
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Thu Dec 1 00:43:13 2022 +0100
[ME007] Updated state maschine to trigger and receive sensor measurements
commit d137e6dec5104b4716428849d99c68bbf407ab42
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Wed Nov 30 20:35:31 2022 +0100
[ME007] Added initial state maschine to trigger and receive sensor measurements
commit fc3da7b36849df162d9d5496a763ab2beb096aff
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Tue Nov 29 21:28:28 2022 +0100
[ME007] Updated pin name
commit e9fa9fb771cf15dcd9ed8b63b9194154543ef10e
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Mon Nov 28 22:02:34 2022 +0100
[ME007] Fixed issue that sensor GPIOs not shown in drop-down list
commit a13e42660183eb4ab91007ca0ea6bf1544687556
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Mon Nov 28 15:06:34 2022 +0100
[ME007] Added sensor into supported feature list
commit dec17b59ce2905124386f8c90d81656bf104c844
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Mon Nov 28 15:01:58 2022 +0100
[ME007] Removed log message in Xsns23()
commit 11f479d2ec9d3f4e7552c2f78cdc83914c5b8b94
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Mon Nov 28 10:47:55 2022 +0100
[ME007] Added GPIOs to tasmota_template_legacy.h and berry
commit 23aec8e5ff4e9fb8ef7d3b01a707641accc1e01e
Author: Mathias Buder <mathias.buder@gmail.com>
Date: Sun Nov 27 20:10:53 2022 +0100
[ME007] Initial ME007 driver API setup
* [ME007] Reverted change in .gitignore and platform.ini
* [ME007] Removed dependency to stdlib.h
* [ME007] Adjusted unit to cm
* [ME007] Reverted change in tasmota_template_legacy.h
* [ME007] Changed sensor message tag to three characters
* [ME007] Disabled sensor in my_user_config.h
* [ME007] Added driver code size into commente
Co-authored-by: Mathias Buder <mathias_buder@bose.com>
2022-12-14 11:52:26 +01:00
Stephan Hadinger
4a32623a51
IPv6 improvements
2022-12-10 13:44:16 +01:00
Stephan Hadinger
ec17440662
Berry crypto module, with AES_GCM by default and EC_CC25519 optional
2022-12-04 19:20:11 +01:00
Theo Arends
53563d44d8
Add support for HLK-LD2410 24GHz smart wave motion sensor
...
Add support for HLK-LD2410 24GHz smart wave motion sensor
2022-11-26 17:49:25 +01:00
Stephan Hadinger
5c3df72675
Disable MQTT_HOST_DISCOVERY by default
2022-11-23 21:57:40 +01:00
Stephan Hadinger
87de264146
Improve mdns logging
2022-11-23 21:41:35 +01:00
Theo Arends
21290de9c4
Prep HLK-LD2410
2022-11-21 14:07:25 +01:00
Theo Arends
425f83bf85
Update Serial Bridge code size
2022-11-19 14:59:36 +01:00
Theo Arends
783631903d
Add user control over Serial Bridge buffers
...
- Add optional define ``SERIAL_BRIDGE_BUFFER_SIZE`` to set Serial Bridge internal buffer size (Default ESP8266 = 256, ESP32 = 800)
- Add command ``SSerialBuffer 256..SERIAL_BRIDGE_BUFFER_SIZE`` to change serial bridge rx buffer size (#17120 )
2022-11-18 16:21:54 +01:00
Theo Arends
229c2cce06
Revert Art-Net to ArtNet
2022-11-16 10:55:56 +01:00
Theo Arends
5f3d504c30
Add support for HMC5883L
...
Add support for HMC5883L 3-Axis Digital Compass sensor by Andreas Achtzehn (#17069 )
2022-11-15 11:11:32 +01:00
Andreas Achtzehn
20d9975d6f
Support for I2C device HMC5883L (3-axis magnetic sensor)
2022-11-14 20:20:04 +01:00
Theo Arends
c92d51f050
Rename ArtNet to Art-Net
2022-11-14 14:20:41 +01:00
Stephan Hadinger
2549203c13
Added WS2812 and Light ArtNet DMX control over UDP port 6454
2022-11-13 18:22:39 +01:00