17d68750d9
WIP Tuya MCU Bridge driver alternative to the TuyaMCU driver ( #17626 )
...
* WIP Tuya MCU Bridge driver alternative to the TuyaMCU driver
The main difference is this driver does not try and wire MCU data points
(Dps) into the tasmota power/light/etc controls. Instead each Dp ends up
being relayed directly to MQTT and the rules subsystem. If you want to
change the state of something wired up to the MCU, you send tuyamcu
specific commands to manipulate the Dp.
Each Dp gets a type and id specific topic that is sent to MQTT. eg, Dp
id 1 type bool looks like tele/%topic%/TUYAMCUBOOL1. To change state you
send a TuyaMCUBool1 command (ie, the command index value is used as the
DpId, which is nice and symmetrical) with the new value.
Currently Rules operate on TuyaMCU#TypeDpid things, eg, "rule1 on
TuyaMCU#Bool1 do power %value% endon" toggle the power on the tasmota
device when the state of the thing on the MCU changes too.
The most obviously missing stuff at the moment is:
- better relaying of the wifi/mqtt status to the MCU
- handling wifi reset requests from the MCU
- low power stuff?
- support for sending status updates and device info queries.
- restarting the tuya mcu state machine?
- restarting the rx state machine when no bytes are rxed for a period of
time
- time sync
* shorten the log prefix to TYB (3 chars).
requested by arendst
* use the local definition for the SET_DP command.
reaching back to the existing tuyamcu code isnt reliable.
pointed out by arendst
* put the todo list in the code so it can be tracked
* check the wifi/mqtt state every second and update the mcu if it changes.
* fix rule processing when Dp state is changed from a cmnd.
rule processing was done as part of publishing the state, but publishing
the state when it was updated by a command only happened if So59 was
set. split rule processing out of publish and call them separately as
needed.
publish is now called from teleperiod, status updates from the MCU,
and from cmnds if so59 is set. rules are called from status updates from
the MCU and from cmnds.
Co-authored-by: David Gwynne <dlg@defeat.lan.animata.net>
2023-01-08 17:35:45 +01:00
14ee8decf7
Update changelogs
...
Add support for PCA9632 4-channel 8-bit PWM driver as light driver by Pascal Heinrich (#17557 )
2023-01-01 14:29:41 +01:00
20a50ffc2e
Revert Tuya rewrite
...
- Update changelogs
2022-12-31 16:08:59 +01:00
fc8039d960
Adding support for ME007-ULS narrow FoV ultrasonic distance sensor ( #17376 )
...
* Squashed commit of the following:
commit 1441459a47cff0a43aa61ce47510585ee03649f3
Merge: a9fcbd342 7e27945e5d83119897eee86f01ade408921ee7d40b8d1816fd78fb
2022-12-14 11:52:26 +01:00
8ad0e8b9ec
Change espupload from curl to requests
2022-12-13 14:54:20 +01:00
53563d44d8
Add support for HLK-LD2410 24GHz smart wave motion sensor
...
Add support for HLK-LD2410 24GHz smart wave motion sensor
2022-11-26 17:49:25 +01:00
f9138984bf
Add accept filename extensions to GUI
...
Add accept filename extensions to GUI file upload input fields (#16875 )
2022-11-20 15:07:38 +01:00
5f3d504c30
Add support for HMC5883L
...
Add support for HMC5883L 3-Axis Digital Compass sensor by Andreas Achtzehn (#17069 )
2022-11-15 11:11:32 +01:00
e83882b655
Update changelogs
2022-11-10 13:54:05 +01:00
a469b35f02
Bump version to v12.2.0.3
2022-11-07 11:06:17 +01:00
9bd458337f
Zigbee fix checksum in ZBBridge Pro router firmware
2022-11-03 14:24:41 +01:00
549f13f7a8
Fix Berry `gpio.INPUT` conflict
2022-10-25 11:49:39 +02:00
72b4ea2ee3
Add Zigbee router firmware for Sonoff ZBBridgePro
2022-10-24 13:52:05 +02:00
3427e1bee3
Support for Modbus Energy Monitoring devices
...
Support for Modbus Energy Monitoring devices using a rule file. See ``xnrg_29_modbus.ino`` for more information
2022-10-08 16:14:11 +02:00
da623701d7
Add support for QMC5883L magnetic induction sensor
...
Add support for QMC5883L magnetic induction sensor by Helge Scheunemann (#16714 )
2022-10-05 15:00:03 +02:00
ec964d1c9e
Add can bus sniffer
...
Add can bus sniffer based on MCP2515 (#16684 )
2022-09-29 14:31:40 +02:00
6bfb9d6aa4
Update changelogs
2022-09-24 16:53:11 +02:00
86e45969bd
Support for DFRobot SEN0390 V30B ambient light sensor
...
Add support for DFRobot SEN0390 V30B ambient light sensor (#16105 )
2022-09-02 13:13:47 +02:00
684584a5e5
Command ``SetOption146 1`` to enable display of ESP32 internal temperature
2022-09-02 11:24:47 +02:00
cbfd2e1db7
Put USE_SGP40 at the correct place in decode-status
...
Remove used line from support_features.ino
2022-08-26 10:07:57 -04:00
214f4bbdfd
Add support for SGP40 sensor
2022-08-25 15:51:51 -04:00
103808ce44
Add command ``StatusRetain``
...
Add command ``StatusRetain`` (#11109 )
2022-08-19 14:24:55 +02:00
2cdfcf5345
Update changelog and templates
2022-08-11 14:47:31 +02:00
4170d79a5b
fix OTA URL
2022-08-10 17:58:58 +02:00
5086082de0
Merge pull request #16159 from pgollor/pgollor-patch1
...
add option to change host url for OTA upload
2022-08-06 09:31:09 +02:00
202ec86453
Update changelogs
2022-08-05 15:52:53 +02:00
a4d7148a52
add option to change host url for OTA upload
2022-08-05 14:21:11 +02:00
d475ccd5c5
Update decode-status.py
2022-07-25 10:00:12 +02:00
722406a461
Add support for Modbus bridge
...
Add support for Modbus bridge adding commands ``ModbusSend``, ``ModbusBaudrate`` and ``ModbusSerialConfig`` (#16013 )
2022-07-20 10:41:02 +02:00
846b217427
Bump version to v12.0.2.4
...
- Bump version to v12.0.2.4
- Command ``SetOption45 1..250`` to change default bistable latching relay pulse length of 40 milliseconds (#15856 )
2022-07-16 14:32:18 +02:00
cc9c6299ca
Consolidate I2S GPIOs
2022-07-11 15:49:57 +02:00
e6b4a77abd
Add ESP32 Sonoff sensor support
...
- Bump version to v12.0.2.3
- Add ESP32 SI7021, THS01 and MS01 support
- Fix THRxxD template
2022-07-06 16:58:27 +02:00
f76400ba03
Initial implementation of SM2335 LED driver.
2022-06-21 00:32:56 -05:00
3a22874124
Increase wifi retry time ( #14394 )
...
- Increase wifi retry time (#14394 )
- Remove 1 second system hang on wifi re-connect (retry)
- Try to limit the number of seconds unresponsiveness due to wifi reconnect
2022-06-10 14:49:35 +02:00
19e8f1a2af
Prep HYT271 sensor support
2022-05-31 14:56:09 +02:00
20e12c2a41
Update changelogs
2022-05-30 11:34:29 +02:00
65a87fd747
Add command ``SetOption141 1``
...
- Add command ``SetOption141 1`` to disable display of module name in GUI header
- Prep SO146-177
2022-05-29 15:49:57 +02:00
1612b8169a
Copy Sonoff ZB Pro autoconf in Tasmota repo
2022-05-27 15:46:18 +02:00
b3415c9071
Zigbee flasher for Sonoff ZB Bridge Pro - dump + firmware
2022-05-26 19:24:50 +02:00
cab5cb4753
Update changelogs
2022-05-04 15:34:26 +02:00
453e7b3a6b
Berry update gpio list with SDIO and more
2022-04-30 13:18:22 +02:00
b1933f7c0e
Rename flowratemeter
2022-04-27 17:44:07 +02:00
d7d71cd9c8
Add flowmeter (YF-DN50 and similary)
2022-04-27 17:44:06 +02:00
d71c1711f2
Add command ``SetOption139 0/1``
...
- Add command ``SetOption139 0/1`` to switch between pressure unit "mmHg" (0) or "inHg" (1) when ``SO24 1`` (#15350 )
- Change double constants to float constants saving 200 bytes
2022-04-19 14:45:26 +02:00
c7323eea74
Initial support for Sonoff MS01
...
Initial support for Sonoff MS01 (#15335 )
2022-04-10 17:21:38 +02:00
c3132594d3
Add support for improv as used by esp-web-tools
2022-04-02 11:43:29 +02:00
1b04a00488
Add command ``SetOption136 1``
...
Add command ``SetOption136 1`` to disable single sensor reports from Tuya devices while keeping teleperiod reports (#15216 )
2022-03-25 16:27:57 +01:00
2e670be61c
Update to latest GPIO types
2022-03-17 22:58:42 +01:00
55610efcb2
Support for up to four DS3502
...
Support for up to four DS3502 digital potentiometers with command ``Wiper<x> 0..127``
2022-03-17 16:03:40 +01:00
ef730606ac
Merge pull request #15108 from barbudor/vl53l1x_xshut
...
Support up to 8x VL53L1X using XSHUT pin
2022-03-12 17:56:57 +01:00
David Gwynne
Theo Arends
Mathias
Stephan Hadinger
Jean-Pierre Deschamps
Jason2866
Pascal Gollor
Cossid
Norbert Richter