* fixes multiple SHT3X sensor type bug
Important when multiple sensors are present at the same bus. Prior to this fix, multiple SHT3X sensor were detected, but not SHTC3 and SHT4X!
* Update xsns_14_sht3x.ino
Extends I²C address range to include SHT40-CD1B sensors with address 0x46.
* Update I2CDEVICES.md
* Show bus when multiple sensors at different busses
* Make bus number less intrusive
Only show bus number if two sensors or more are active at more than one bus.
* variable renamed
* cleanup
* fix typo
* fix another typo
* Harmonization and saving code size for ESP8266
Harmonization with xsns_09_bmp driver, saving code size for ESP8266
* fix string for webserver
* Display address only if more than one sensor present.
* add support for ams5915 and ams6915 temerature and pressure sensors
* improved function namings
* optimized detection of sensor
* set verbosity level to debug
* minor code cleanings
* added seconds-counter to minimize i2c bus load, minor code cleanups
* add meas_valid in sensor struct to differentiate between sensor present (at tasmota boot) and measurement valid (if sensor was reattached) at runtime
* removed global struct and sensor_present, introduced dynamic memory allocation if sensor is present at startup, minor code changes
* fixes missing initialisation of variable
* corrected the amount of used memory if compiled with AMSX915 support
* Update my_user_config.h
disable AMSx915 by default
---------
Co-authored-by: baschdello <urschelb@rhrk.uni-kl.de>
Co-authored-by: Bastian <bastianurschel@gmail.com>
* Add files via upload
Added ENS16x library enabling read-out of ENS160 and ENS161 sensor component (follow-up of CCS811 and iAQcore)
Added ENS210 library to read out ENS210 temperature & humidity sensor
* Add files via upload
Add air quality sensor readout for ENS160 and ENS161 checking two possible I2C addresses (follow up sensor for CCS811 and iAQcore)
Add temperature and humidity sensor readout checking two possible I2C addresses
* Update BUILDS.md
Add USE_ENS16x and USE_ENS210
* Update decode-status.py
Add USE_ENS16x and ENS210
* Update I2CDEVICES.md
Add USE_ENS16x and USE_ENS210
* Update my_user_config.h
Add USE_ENS16x and USE_ENS210
* Update support_features.ino
Add USE_ENS16x and USE_ENS210
* Update tasmota_configurations.h
Add USE_ENS16x and ENS210
* Update tasmota_configurations_ESP32.h
Add USE_ENS16x and USE_ENS210
* Update xsns_111_ens16x.ino
Corrected I2X number
* Update xsns_112_ens210.ino
Corrected I2C number
* Disable USE_ENS16x and USE_ENS210 by default
* Added code size information
* cut down in libs
* optimize tasmota side
* fix ens16x web display
* final fix on alternate addresses
* update code & RAM usage
---------
Co-authored-by: Barbudor <barbudor@barbudor.net>
* Restart MAX17043 from the scratch
* revert change
* Changed battery capacity in charge (capacity is the Ah value of the battery, this degrades over time when battery ages)
* merge
* Changing xsns_109 to 110
* fix nr
* removed old xsns109
* Update I2CDEVICES.md
* clean-up usage of Interface
* Initial support for PMSA003I air quality sensor.
* Updated pmsa003i support to the latest dev branch
* Fixed typo in esp32 configuration
Removed all global variable and use the PM25_AQI_Data struct from Adafruit library
Fix typo Xsns100 to Xsns104
Fix Typo XI2C_71 to XI2C_78
* Move everything in custom Struct for PMSA003I driver
---------
Co-authored-by: Jean-Pierre Deschamps <info@jpdeschamps.com>
Hi guys,
I had problems understanding, what was written; so here my proposal.
I recommend also to change line 43 and 44, as address 0x27 is also supported:
https://tasmota.github.io/docs/MCP230xx/#usage-of-the-driver
It may not be a good idea, but i have a working example on my desk.
Jan-David Förster
Theo Arends
Rai
s-hadinger
Bastian Urschel
Christoph Friese
Vincent de Groot
Andrew Klaus
CCTweaker
Szewcson
Jean-Pierre Deschamps
sfromis
Tyeth Gundry
Barbudor
kaedwen
Stefan Oskamp
Andreas Achtzehn
Helge
Jean-Pierre Deschamps
F. Scheidig
Luc Boudreau
Arnold-n
Arnold Niessen
Alexander Savchenko