Theo Arends
49acf4a7d3
Add optional hardware serial
...
* Add optional hardware serial when GPIO13(Rx) and GPIO15(Tx) are selected removing hardware serial from GPIO01(Tx) and GPIO03(Rx) (#4288 )
* Bump TasmotaSerial version from 2.1.0 to 2.2.0
2018-11-06 11:27:19 +01:00
Joel Stein
d6983d268b
TasmotaSerial: use Serial.swap to map UART0 to GPIO13 and GPIO15
2018-11-05 07:34:12 +01:00
Joel Stein
e9050be550
TasmotaSerial: fix hardware-serial
2018-11-05 07:13:16 +01:00
Theo Arends
f2b04092f8
Initial release of RF transceiving
...
Initial release of RF transceiving using library RcSwitch (#2702 )
2018-10-25 18:17:58 +02:00
ascillato
8899bc8390
KNX: Deleted ESPAsyncUDP Library
2018-10-24 14:21:33 -03:00
ascillato
00c99e512b
KNX: Updated ESP-KNX-IP Lib to use only WIFIUDP Lib
2018-10-24 14:20:34 -03:00
Adrian Scillato
11da866bce
KNX: Disabling ESPAsyncUDP Library
...
When using KNX in cores > 2.3.0, the ESPAsyncUDP Library was used instead of the WIFIUDP Library. As now ESPAsyncUDP is no longer mantained and also it does not work in last version of the Arduino STAGE Core, now for all cores KNX will use the WIFIUDP Library.
2018-10-24 12:46:25 -03:00
Theo Arends
9f4fed1584
Update PubSubClient lib
...
Add delay when waiting for data and flush on disconnect
2018-10-23 17:07:43 +02:00
Theo Arends
2c02532e1c
6.2.1.19 Rename user_config.h
...
6.2.1.19 20181023
* Fix header file execution order by renaming user_config.h to my_user_config.h
* Fix Arduino IDE compilation warning regarding e-paper library
2018-10-23 15:51:51 +02:00
Theo Arends
0ab43909c3
6.2.1.17 Changes and Adds
...
6.2.1.17 20181017
* Enable updated non-blocking PubSubClient as default MQTT client
* Update TasmotaModbus and TasmotaSerial libraries for support of serial 8N2 communication
* Add support for Pzem-003/017 DC Energy monitoring module (#3694 )
* Change support for Pzem-014/016 AC Energy monitoring module (#3694 )
2018-10-17 12:27:05 +02:00
Theo Arends
04493965e4
Update PubSubClient lib
...
Replaced PubSubClient library by EspEasy patched non-blocking version saving some 3k5 code space over arduino-mqtt library
2018-10-16 14:15:20 +02:00
Theo Arends
fb6cc194a9
6.2.1.16 Add TasmotaModbus lib
...
6.2.1.16 20181015
* Add TasmotaModbus library for very basic modbus wrapper for TasmotaSerial
* Change xsns_17_senseair.ino to use TasmotaModbus library
* Fix xnrg_05_pzem2.ino for PZEM-014/016 support using TasmotaModbus library (#3694 )
2018-10-15 17:18:30 +02:00
Theo Arends
ace8491d59
Update arduino-mqtt library
...
Update arduino-mqtt library to 2.4.0
2018-10-11 18:19:52 +02:00
Theo Arends
6cd59d2b3e
Forgot the library swap
2018-10-02 17:19:02 +02:00
Theo Arends
19a8113cf4
Revert "Merge branch 'release-6.2' into development"
...
This reverts commit 433dc8d9d1
, reversing
changes made to 6c61cdead7
.
2018-08-28 18:13:14 +02:00
Theo Arends
ea53e930e1
Remove files not to release
...
Remove files not to release
2018-08-28 16:39:17 +02:00
Adrian Scillato
84a715dc9b
KNX: Automatic Multicast Library Selection
2018-08-27 02:27:41 -03:00
Adrian Scillato
960c2e32fc
KNX: Automatic Multicast Library Selection
2018-08-27 02:26:21 -03:00
Theo Arends
510321f2e1
Change to latest GFX/ILI9341 libs
...
Change to latest Adafruit GFX and ILI9341 libraries (saves 300 bytes ;-)
2018-08-21 16:28:18 +02:00
Theo Arends
8ac213e99d
Fix DisplayRotate
...
* Fix DisplayRotate
* Increase SSD1306 row count to 16
* Remove redundant Tasmota function from Adafruit ILI9341 library
2018-08-21 14:56:58 +02:00
Theo Arends
b12c8d39d5
Add initial display support
...
Add initial display support for Lcd, Oled, Matrix, Tft and e-paper - Need more docs
2018-08-18 18:11:22 +02:00
Theo Arends
b031e2f9b4
Updated esp-epaper library
...
Updated esp-epaper library
2018-08-14 11:26:39 +02:00
Theo Arends
77b1c366fe
Add Tasmota supported libraries
...
Add Tasmota supported libraries
2018-08-14 10:28:47 +02:00
Oliver Welter
06c2ab8229
Added support for MPU6050 gyro sensor
2018-07-28 03:53:51 +02:00
Theo Arends
b7b87f5524
Add CCS811 library version
...
Add CCS811 library version
2018-07-23 17:25:50 +02:00
gemu2015
d21a04e872
ccs811
...
completely new from arends/development
2018-07-23 16:27:15 +02:00
Adrian Scillato
29c7e409ee
ESP-KNX-IP Library - Correct invalid keywords.txt KEYWORD_TOKENTYPE
2018-07-22 22:37:22 -03:00
Theo Arends
cc24dd11ce
Update TSL2561 library
...
Remove TSL2561 debug message and update library (#2415 )
2018-07-09 12:41:17 +02:00
Theo Arends
d08cefb0df
Rewrite BME680 driver
...
Rewrite BME680 driver now using latest Bosch BME680 library (#2969 )
2018-07-04 18:41:00 +02:00
ascillato
b0e979673a
Revert "Merge branch 'development' into development"
...
This reverts commit 3ca69e499b
, reversing
changes made to 7d8495b263
.
2018-06-05 18:54:35 -03:00
ascillato
1c20dbe3a2
Revert "Revert Changes"
...
This reverts commit 1c337ae28e
.
2018-06-05 18:54:30 -03:00
ascillato
1c337ae28e
Revert Changes
2018-06-05 17:04:34 -03:00
Adrian Scillato
145352ee27
Sync to Tasmota
...
Sync to Tasmota
2018-06-04 18:33:46 -03:00
Theo Arends
d4119fe54d
Add SnfBrdg EFM8BB1 fw tools
...
6.0.0a
* Add support for uploading Sonoff Bridge firmware found in
tools/fw_efm8bb1 folder build by Portisch using Web Gui File Upload
(#2886 )
* Add command RfRaw to control Portisch firmware features
2018-06-04 18:10:38 +02:00
ascillato
fa12295beb
Updated esp-knx-ip library
...
Updated esp-knx-ip library with a merged version that allows to select multicast library to use:
* WIFI UDP (for esp lib 2.3.0 and up)
* AsyncUDP (for esp lib 2.4.0 and up)
The selection can be done with a definition key in the file esp-knx-ip.h
2018-05-18 20:42:23 -03:00
ascillato
6672075481
Added Optional Files
...
Added Optional Files
2018-05-18 15:00:37 -03:00
Adrian Scillato
ba8018fe8c
Add Hardware Serial Fallback to TasmotaSerial
...
Add Hardware Serial Fallback to TasmotaSerial
2018-05-10 14:36:32 -03:00
Theo Arends
c51bcd77d1
Add Hardware Serial Fallback to TasmotaSerial
...
5.13.1a
* Update TasmotaSerial to 2.0.0 allowing Hardware Serial Fallback when
correct connection are configured
2018-05-10 17:21:26 +02:00
Adrian Scillato
9aec82b27c
Update from Tasmota
...
Update from Tasmota
2018-05-08 17:25:43 -03:00
Theo Arends
49aec2e307
Fix sensor MHZ-19 vanishing data over time
...
5.13.1a
* Fix sensor MHZ-19 vanishing data over time (#2659 )
2018-05-08 17:07:55 +02:00
Theo Arends
458f00b2bd
Revert "Fix sensor MHZ-19 vanishing data over time"
...
This reverts commit b7b3f9b0d5
.
2018-05-08 17:05:49 +02:00
Theo Arends
b7b3f9b0d5
Fix sensor MHZ-19 vanishing data over time
...
5.13.1a
* Fix sensor MHZ-19 vanishing data over time (#2659 )
2018-05-08 17:04:35 +02:00
ascillato
ea202731bb
Add Tasmota Display
2018-05-02 00:32:29 -03:00
Theo Arends
8a77c48759
Fix Esp/lib 2.3.0 compile error
...
5.12.0m
* Fix compile error when using ESP/Arduino library v2.3.0 by
reverting KNX async UDP library to default UDP library (#2488 , #2492 ,
#2493 )
2018-04-19 20:27:57 +02:00
ascillato
bce8dfe983
Update KNX Library
...
Update KNX Library
2018-04-19 14:14:53 -03:00
ascillato
7e5d2f9415
Update
...
Update
2018-04-18 22:46:41 -03:00
Adrian Scillato
e8a56c6db5
Merge pull request #55 from arendst/development
...
update from tasmota
2018-04-17 14:04:33 -03:00
Theo Arends
5858ecdb79
Fix negative Lat an Long value entry
...
5.12.0l
* Fix negative Latitude and Longitude value entry (#2461 )
2018-04-17 15:34:18 +02:00
Adrian Scillato
83d6049fe5
Update to new API version of ESP-KNX-IP
2018-04-09 22:42:51 -03:00
Adrian Scillato
99a0b58189
Update esp-knx-ip.cpp
2018-04-09 01:19:05 -03:00