6.1.1.9
* Allow user override of define MAX_RULE_TIMERS (#3561)
* Allow user override of define MAX_RULE_VARS
* Add GPIO options ButtonXn, SwitchXn and CounterXn to select INPUT mode instead of INPUT_PULLUP (#2525)
* Fix OtaMagic when file path contains a dash (-) (#3563)
* Added command KNX_GA so as to setup Group Address to Send Data/Commands
Usage:
KNX_GA
(return the amount of GA configured)
KNX_GA 1
(return the configuration of the GA#1
KNX_GAx option, area, line, member
(Set the configuration of the GA#x)
example: KNX_GA3 1, 2,2,4
For the GA#3, the status of Relay 1 is sent to 2.2.4
* Added command KNX_CB so as to setup Group Address to Receive Data/Commands
KNX_CBx option, area, line, member
example: KNX_CB2 1, 2,2,4
For the CB#2, listen to 2.2.4 to set the status of the Relay 1
Posible values of the parameter OPTION:
1 - Relay 1
2 - Relay 2
3 - Relay 3
4 - Relay 4
5 - Relay 5
6 - Relay 6
7 - Relay 7
8 - Relay 8
9 - Button 1
10 - Button 2
11 - Button 3
12 - Button 4
13 - Button 5
14 - Button 6
15 - Button 7
16 - Button 8
17 - TEMPERATURE
18 - HUMIDITY
19 - ENERGY_VOLTAGE
20 - ENERGY_CURRENT
21 - ENERGY_POWER
22 - ENERGY_POWERFACTOR
23 - ENERGY_DAILY
24 - ENERGY_START
25 - ENERGY_TOTAL
26 - KNX_SLOT1
27 - KNX_SLOT2
28 - KNX_SLOT3
29 - KNX_SLOT4
30 - KNX_SLOT5
255 - EMPTY
Added the EVENT KNXRX_VAL1...5 when receiving values from the KNX Network or another Tasmota with KNX
Now, sensor values (for example) can be sent from one device to another.
6.0.0a
* Add support for uploading Sonoff Bridge firmware found in
tools/fw_efm8bb1 folder build by Portisch using Web Gui File Upload
(#2886)
* Add command RfRaw to control Portisch firmware features
* Added Console Commands to send KNX Commands
usage: KnxTx_Cmnd[slot] command
where [slot] is any of the 5 slots on the KNX Menu and command is 0 or 1
example: KnxTx_Cmnd1 0
* Added Console Commands to send KNX Values
usage: KnxTx_Val[slot] value
where [slot] is any of the 5 slots on the KNX Menu and value is a number
example: KnxTx_Val1 35
* Added Slots on the KNX Web Menu to select Group Addess to send data from console commands
* Added Events to trigger rules when received data from KNX
usage on rules as: event#KnxRx_Val[slot]
where [slot] is any of the 5 slots on the KNX Menu
example: rule on event#KnxRx_Val1 do VAR1 %value% endon
* Added Events to trigger rules when received read requests from KNX
usage on rules as: event#KnxRx_Req[slot]
where [slot] is any of the 5 slots on the KNX Menu
example: rule on event#KnxRx_Req1 do KnxTx_Val1 35 endon
* Added Slots on the KNX Web Menu to select Group Addess to receive data to trigger rules
5.14.0a
* Add KNX energy data (#2750)
* Fix display selection of
un-available GPIO options in Module Configuration webpage (#2718)
* Fix
IRSend not accepting data value of 0 (#2751)
Add control by KNX for all Tasmota Outputs
Before this commit, only Relays were able to be controlled by KNX. Now all Outputs can be controlled using KNX.
5.12.0m
* Remove sonoff-xxl
* Add sonoff-classic, sonoff-allsensors and sonoff-knx
* Add some coloring to important web buttons
* Add user selectable defines for Sunrise/set Dawn option (#2378)
* Add GPIO_User to GPIO02 for all Sonoff T1 (#2524)
Theo Arends
Adrian Scillato
andrethomas
Theo Arends
Adrian Scillato